Haotian Cheng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Haotian Cheng has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
- Peter Thomas Rakich
Department of Applied Physics, Yale University, New Haven, CT 06511, USA
7 shared publications - Franklyn Quinlan
Time and Frequency Division, National Institute of Standards and Technology, Boulder, CO 80305, USA
4 shared publications Naijun Jin
Department of Applied Physics Yale University 06520 New Haven CT USA
4 shared publications- Scott A. Diddams
University of Colorado
4 shared publications - Yifan Liu
National Institute of Standards and Technology
4 shared publications - Yishu Zhou
Department of Applied Physics, Yale University, New Haven, USA
4 shared publications
Latest Publications
- Open Access
- 1 December 2025
- Published by AIP Publishing in APL Photonics
- Vol. 10 (12)
From ultra-noisy to ultra-stable: Optimization of the optoelectronic laser lock
We demonstrate the direct locking of a 820 kHz linewidth semiconductor distributed feedback laser to a high finesse, compact, and ultrastable reference cavity using the optoelectronic (OEO) laser locking method, resulting in cavity thermal noise-limited phase noise performance. We compare the OEO lock to the standard Pound–Drever–Hall method, demonstrating several new aspects and advantages of the OEO lock in attaining low phase noise from noisy lasers, including reducing the residual laser noise by more than 140 dB compared to its free-running level at a 10 Hz offset. In addition, we introduce a new RF feedforward noise-correction scheme that transfers the stability of the ultrastable reference cavity to an optical frequency comb even if the cavity-stabilized laser itself has high residual noise. We also reveal an OEO lock state that is capable of extremely high levels of laser noise rejection using feedforward, exceeding current theoretical models by ∼15 dB. By combining compact laser sources with sub-1 ml volume and ultrastable optical cavities, this work enables extremely compact and robust ultrastable laser systems with applications in low phase noise microwave generation, sensing, and satellite ranging.
- 1 December 2025
- Published by AIP Publishing in APL Photonics
- Vol. 10 (12)
Open AccessFrom ultra-noisy to ultra-stable: Optimization of the optoelectronic laser lock
We demonstrate the direct locking of a 820 kHz linewidth semiconductor distributed feedback laser to a high finesse, compact, and ultrastable reference cavity using the optoelectronic (OEO) laser locking method, resulting in cavity thermal noise-limited phase noise performance. We compare the OEO lock to the standard Pound–Drever–Hall method, demonstrating several new aspects and advantages of the OEO lock in attaining low phase noise from noisy lasers, including reducing the residual laser noise by more than 140 dB compared to its free-running level at a 10 Hz offset. In addition, we introduce a new RF feedforward noise-correction scheme that transfers the stability of the ultrastable reference cavity to an optical frequency comb even if the cavity-stabilized laser itself has high residual noise. We also reveal an OEO lock state that is capable of extremely high levels of laser noise rejection using feedforward, exceeding current theoretical models by ∼15 dB. By combining compact laser sources with sub-1 ml volume and ultrastable optical cavities, this work enables extremely compact and robust ultrastable laser systems with applications in low phase noise microwave generation, sensing, and satellite ranging.
- Open Access
- 1 September 2025
- Published by AIP Publishing in APL Photonics
- Vol. 10 (9)
Dual laser self-injection locking to a micro Fabry–Perot for low phase noise millimeter-wave generation
Low-noise and accessible millimeter-wave sources are critical for emergent telecommunications, radar, and sensing applications. Current limitations to realizing low-noise, deployable millimeter-wave systems include size, weight, and power requirements, along with complex operating principles. In this paper, we provide a compact photonic implementation for generating low phase noise millimeter-waves, which significantly simplifies the architecture and reduces the volume compared to alternative approaches. Two commercial diode lasers are self-injection-locked to a micro-Fabry–Perot cavity, and their heterodyne provides low phase noise millimeter-waves reaching −148 dBc/Hz at 1 MHz offset on a 111.45 GHz carrier. Phase noise characterization at such levels and frequencies poses unique challenges, and we further highlight the capabilities of optically based measurement techniques. Our approach to millimeter-wave generation can leverage advances in photonic integration for further miniaturization and packaging, thus providing a unique source of accessible, compact, and low-noise millimeter-waves.
- 1 September 2025
- Published by AIP Publishing in APL Photonics
- Vol. 10 (9)
Open AccessDual laser self-injection locking to a micro Fabry–Perot for low phase noise millimeter-wave generation
Low-noise and accessible millimeter-wave sources are critical for emergent telecommunications, radar, and sensing applications. Current limitations to realizing low-noise, deployable millimeter-wave systems include size, weight, and power requirements, along with complex operating principles. In this paper, we provide a compact photonic implementation for generating low phase noise millimeter-waves, which significantly simplifies the architecture and reduces the volume compared to alternative approaches. Two commercial diode lasers are self-injection-locked to a micro-Fabry–Perot cavity, and their heterodyne provides low phase noise millimeter-waves reaching −148 dBc/Hz at 1 MHz offset on a 111.45 GHz carrier. Phase noise characterization at such levels and frequencies poses unique challenges, and we further highlight the capabilities of optically based measurement techniques. Our approach to millimeter-wave generation can leverage advances in photonic integration for further miniaturization and packaging, thus providing a unique source of accessible, compact, and low-noise millimeter-waves.
- Top Cited PapersOpen Access
- 6 June 2025
- Published by Springer Nature in Nature Photonics
- Vol. 19 (9) , 992-998
Harnessing micro-Fabry–Pérot reference cavities in photonic integrated circuits
- 6 June 2025
- Published by Springer Nature in Nature Photonics
- Vol. 19 (9) , 992-998
Top Cited PapersOpen AccessHarnessing micro-Fabry–Pérot reference cavities in photonic integrated circuits
- 15 April 2025
- Published by Springer Nature in Nature Photonics
- Vol. 19 (5) , 533-539
A terahertz-bandwidth non-magnetic isolator
- 15 April 2025
- Published by Springer Nature in Nature Photonics
- Vol. 19 (5) , 533-539
A terahertz-bandwidth non-magnetic isolator
- Open Access
Harnessing micro-Fabry-Perot reference cavities in photonic integrated circuits
Compact photonic systems that offer high frequency stability and low noise are of increasing importance to applications in precision metrology, quantum computing, communication, and advanced sensing technologies. However, on-chip resonators comprised of dielectrics cannot match the frequency stability and noise characteristics of Fabry-Perot cavities, whose electromagnetic modes live almost entirely in vacuum. In this study, we present a novel strategy to interface micro-fabricated Fabry-Perot cavities with photonic integrated circuits to realize compact, high-performance integrated systems. Using this new integration approach, we demonstrate self-injection locking of an on-chip laser to a milimeter-scale vacuum-gap Fabry-Perot using a circuit interface that transforms the reflected cavity response to enable efficient feedback to the laser. This system achieves a phase noise of -97 dBc/Hz at 10 kHz offset frequency, a fractional frequency stability of 5*10-13 at 10 ms, a 150 Hz 1/pi integral linewidth, and a 35 mHz fundamental linewidth. We also present a complementary integration strategy that utilizes a vertical emission grating coupler and a back-reflection cancellation circuit to realize a fully co-integrated module that effectively redirects the reflected signals and isolates back-reflections with a 10 dB suppression ratio, readily adaptable for on-chip PDH locking. Together, these demonstrations significantly enhance the precision and functionality of RF photonic systems, paving the way for continued advancements in photonic applications.
Open AccessHarnessing micro-Fabry-Perot reference cavities in photonic integrated circuits
Compact photonic systems that offer high frequency stability and low noise are of increasing importance to applications in precision metrology, quantum computing, communication, and advanced sensing technologies. However, on-chip resonators comprised of dielectrics cannot match the frequency stability and noise characteristics of Fabry-Perot cavities, whose electromagnetic modes live almost entirely in vacuum. In this study, we present a novel strategy to interface micro-fabricated Fabry-Perot cavities with photonic integrated circuits to realize compact, high-performance integrated systems. Using this new integration approach, we demonstrate self-injection locking of an on-chip laser to a milimeter-scale vacuum-gap Fabry-Perot using a circuit interface that transforms the reflected cavity response to enable efficient feedback to the laser. This system achieves a phase noise of -97 dBc/Hz at 10 kHz offset frequency, a fractional frequency stability of 5*10-13 at 10 ms, a 150 Hz 1/pi integral linewidth, and a 35 mHz fundamental linewidth. We also present a complementary integration strategy that utilizes a vertical emission grating coupler and a back-reflection cancellation circuit to realize a fully co-integrated module that effectively redirects the reflected signals and isolates back-reflections with a 10 dB suppression ratio, readily adaptable for on-chip PDH locking. Together, these demonstrations significantly enhance the precision and functionality of RF photonic systems, paving the way for continued advancements in photonic applications.
- Open Access
- 9 August 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-8
Electrically interfaced Brillouin-active waveguide for microwave photonic measurements
New strategies for converting signals between optical and microwave domains could play a pivotal role in advancing both classical and quantum technologies. Traditional approaches to optical-to-microwave transduction typically perturb or destroy the information encoded on intensity of the light field, eliminating the possibility for further processing or distribution of these signals. In this paper, we introduce an optical-to-microwave conversion method that allows for both detection and spectral analysis of microwave photonic signals without degradation of their information content. This functionality is demonstrated using an optomechanical waveguide integrated with a piezoelectric transducer. Efficient electromechanical and optomechanical coupling within this system permits bidirectional optical-to-microwave conversion with a quantum efficiency of up to −54.16 dB. Leveraging the preservation of the optical field envelope in intramodal Brillouin scattering, we demonstrate a multi-channel microwave photonic filter by transmitting an optical signal through a series of electro-optomechanical waveguide segments, each with distinct resonance frequencies. Such electro-optomechanical systems could offer flexible strategies for remote sensing, channelization, and spectrum analysis in microwave photonics.
- 9 August 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-8
Open AccessElectrically interfaced Brillouin-active waveguide for microwave photonic measurements
New strategies for converting signals between optical and microwave domains could play a pivotal role in advancing both classical and quantum technologies. Traditional approaches to optical-to-microwave transduction typically perturb or destroy the information encoded on intensity of the light field, eliminating the possibility for further processing or distribution of these signals. In this paper, we introduce an optical-to-microwave conversion method that allows for both detection and spectral analysis of microwave photonic signals without degradation of their information content. This functionality is demonstrated using an optomechanical waveguide integrated with a piezoelectric transducer. Efficient electromechanical and optomechanical coupling within this system permits bidirectional optical-to-microwave conversion with a quantum efficiency of up to −54.16 dB. Leveraging the preservation of the optical field envelope in intramodal Brillouin scattering, we demonstrate a multi-channel microwave photonic filter by transmitting an optical signal through a series of electro-optomechanical waveguide segments, each with distinct resonance frequencies. Such electro-optomechanical systems could offer flexible strategies for remote sensing, channelization, and spectrum analysis in microwave photonics.
- Open Access
- 1 January 2024
- Published by AIP Publishing in APL Photonics
- Vol. 9 (1)
Low-noise microwave generation with an air-gap optical reference cavity
We demonstrate a high finesse, microfabricated mirror-based, air-gap cavity with volume less than 1 ml, constructed in an array, that can support low-noise microwave generation through optical frequency division. We use the air-gap cavity in conjunction with a 10 nm bandwidth mode-locked laser to generate low phase noise 10 GHz microwaves, exhibiting a phase noise of −95 and −142 dBc/Hz at 100 Hz and 10 kHz offset frequencies, respectively. This is accomplished using the 2-point lock optical frequency division method, where we exploit 40 dB common-mode rejection of two lasers separated by 1.29 THz and locked to the same air-gap cavity. If used with an octave spanning comb, the air-gap cavity is capable of supporting 10 GHz phase noise below −160 dBc/Hz at 10 kHz offset, a level significantly lower than electronic synthesizers. These results show how extremely small optical reference cavities, operated without the benefit of vacuum enclosures or thermal insulation, can, nonetheless, support state-of-the-art microwave phase noise in compact and portable systems.
- 1 January 2024
- Published by AIP Publishing in APL Photonics
- Vol. 9 (1)
Open AccessLow-noise microwave generation with an air-gap optical reference cavity
We demonstrate a high finesse, microfabricated mirror-based, air-gap cavity with volume less than 1 ml, constructed in an array, that can support low-noise microwave generation through optical frequency division. We use the air-gap cavity in conjunction with a 10 nm bandwidth mode-locked laser to generate low phase noise 10 GHz microwaves, exhibiting a phase noise of −95 and −142 dBc/Hz at 100 Hz and 10 kHz offset frequencies, respectively. This is accomplished using the 2-point lock optical frequency division method, where we exploit 40 dB common-mode rejection of two lasers separated by 1.29 THz and locked to the same air-gap cavity. If used with an octave spanning comb, the air-gap cavity is capable of supporting 10 GHz phase noise below −160 dBc/Hz at 10 kHz offset, a level significantly lower than electronic synthesizers. These results show how extremely small optical reference cavities, operated without the benefit of vacuum enclosures or thermal insulation, can, nonetheless, support state-of-the-art microwave phase noise in compact and portable systems.
- Open Access
- 1 November 2023
- Published by AIP Publishing in APL Photonics
- Vol. 8 (11)
A novel approach to interface high-Q Fabry–Pérot resonators with photonic circuits
The unique benefits of Fabry–Pérot resonators as frequency-stable reference cavities and as an efficient interface between atoms and photons make them an indispensable resource for emerging photonic technologies. To bring these performance benefits to next-generation communications, computation, and time-keeping systems, it will be necessary to develop strategies to integrate compact Fabry–Pérot resonators with photonic integrated circuits. In this paper, we demonstrate a novel reflection cancellation circuit that utilizes a numerically optimized multi-port polarization-splitting grating coupler to efficiently interface high-finesse Fabry–Pérot resonators with a silicon photonic circuit. This circuit interface produces a spatial separation of the incident and reflected waves, as required for on-chip Pound–Drever–Hall frequency locking, while also suppressing unwanted back reflections from the Fabry–Pérot resonator. Using inverse design principles, we design and fabricate a polarization-splitting grating coupler that achieves 55% coupling efficiency. This design realizes an insertion loss of 5.8 dB for the circuit interface and more than 9 dB of back reflection suppression, and we demonstrate the versatility of this system by using it to interface several reflective off-chip devices.
- 1 November 2023
- Published by AIP Publishing in APL Photonics
- Vol. 8 (11)
Open AccessA novel approach to interface high-Q Fabry–Pérot resonators with photonic circuits
The unique benefits of Fabry–Pérot resonators as frequency-stable reference cavities and as an efficient interface between atoms and photons make them an indispensable resource for emerging photonic technologies. To bring these performance benefits to next-generation communications, computation, and time-keeping systems, it will be necessary to develop strategies to integrate compact Fabry–Pérot resonators with photonic integrated circuits. In this paper, we demonstrate a novel reflection cancellation circuit that utilizes a numerically optimized multi-port polarization-splitting grating coupler to efficiently interface high-finesse Fabry–Pérot resonators with a silicon photonic circuit. This circuit interface produces a spatial separation of the incident and reflected waves, as required for on-chip Pound–Drever–Hall frequency locking, while also suppressing unwanted back reflections from the Fabry–Pérot resonator. Using inverse design principles, we design and fabricate a polarization-splitting grating coupler that achieves 55% coupling efficiency. This design realizes an insertion loss of 5.8 dB for the circuit interface and more than 9 dB of back reflection suppression, and we demonstrate the versatility of this system by using it to interface several reflective off-chip devices.
- Open Access
A Novel Approach to Interface High-Q Fabry-Pérot Resonators with Photonic Circuits
The unique benefits of Fabry-P\'erot resonators as frequency-stable reference cavities and as an efficient interface between atoms and photons make them an indispensable resource for emerging photonic technologies. To bring these performance benefits to next-generation communications, computation, and timekeeping systems, it will be necessary to develop strategies to integrate compact Fabry-P\'erot resonators with photonic integrated circuits. In this paper, we demonstrate a novel reflection cancellation circuit that utilizes a numerically optimized multi-port polarization-splitting grating coupler to efficiently interface high-finesse Fabry-P\'erot resonators with a silicon photonic circuit. This circuit interface produces spatial separation of the incident and reflected waves, as required for on-chip Pound-Drever-Hall frequency locking, while also suppressing unwanted back reflections from the Fabry-P\'erot resonator. Using inverse design principles, we design and fabricate a polarization-splitting grating coupler that achieves 55% coupling efficiency. This design realizes an insertion loss of 5.8 dB for the circuit interface and more than 9 dB of back reflection suppression, and we demonstrate the versatility of this system by using it to interface several reflective off-chip devices.
Open AccessA Novel Approach to Interface High-Q Fabry-Pérot Resonators with Photonic Circuits
The unique benefits of Fabry-P\'erot resonators as frequency-stable reference cavities and as an efficient interface between atoms and photons make them an indispensable resource for emerging photonic technologies. To bring these performance benefits to next-generation communications, computation, and timekeeping systems, it will be necessary to develop strategies to integrate compact Fabry-P\'erot resonators with photonic integrated circuits. In this paper, we demonstrate a novel reflection cancellation circuit that utilizes a numerically optimized multi-port polarization-splitting grating coupler to efficiently interface high-finesse Fabry-P\'erot resonators with a silicon photonic circuit. This circuit interface produces spatial separation of the incident and reflected waves, as required for on-chip Pound-Drever-Hall frequency locking, while also suppressing unwanted back reflections from the Fabry-P\'erot resonator. Using inverse design principles, we design and fabricate a polarization-splitting grating coupler that achieves 55% coupling efficiency. This design realizes an insertion loss of 5.8 dB for the circuit interface and more than 9 dB of back reflection suppression, and we demonstrate the versatility of this system by using it to interface several reflective off-chip devices.