Ze Lin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ze Lin has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Guanghui Zhang
School of Mechanical & Electrical Engineering, Guangxi Key Laboratory of Manufacturing Systems and Advanced Manufacturing Technology, Guilin University of Electronic Technology, Guilin, Guangxi 541004, People’s Republic of China
5 shared publications - Yuhong Long
School of Mechanical & Electrical Engineering, Guangxi Key Laboratory of Manufacturing Systems and Advanced Manufacturing Technology, Guilin University of Electronic Technology, Guilin, China
4 shared publications - Hui Jiao
School of Mechanical and Electrical Engineering, Guangxi Key Laboratory of Manufacturing Systems and Advanced Manufacturing Technology, Guilin University of Electronic Technology 1 , Guilin, Guangxi 541004
3 shared publications Jia Zhou
3 shared publications- Yuxing Huang
Guilin University of Electronic Technology
3 shared publications - Jia Zhou
State Key Laboratory of ASIC and System, School of Microelectronics, Fudan University, Shanghai, China
2 shared publications
Latest Publications
- 29 January 2025
- Published by Elsevier in Optics & Laser Technology
- Vol. 184
Mechanistic study of annular water mist assisted Er: YAG laser ablation of bone tissue
- 29 January 2025
- Published by Elsevier in Optics & Laser Technology
- Vol. 184
Mechanistic study of annular water mist assisted Er: YAG laser ablation of bone tissue
- 13 June 2024
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 36 (3)
High-accuracy predictive model for carbon fiber reinforced polymer laser machining quality using neural networks
In order to address the issue of thermal damage induced by laser processing of carbon fiber reinforced polymer (CFRP), researchers have conducted an optimization study of process parameters in the laser processing of CFRP. Their aim is to elucidate the relationship between process parameters and processing quality to minimize thermal damage. However, during laser processing, there exists a complex nonlinear relationship between process parameters and processing quality, making it challenging to establish high-precision predictive models, while the intrinsic connection between these two aspects remains incompletely revealed. In light of this, this study proposes utilization of machine learning techniques to explore the inherent relationship between process parameters and processing quality and establishes a 5-13-5 type back-propagation (BP) neural network predictive model. Subsequently, genetic algorithms are employed to optimize the weights and thresholds of the BP neural network, and the model is then subjected to validation. The results indicate that the BP neural network predictive model yields average errors of 5% for surface heat-affected zone (HAZ), 2.9% for groove width, 5.9% for cross-sectional HAZ, 1.8% for groove depth, and 4.5% for aspect ratio, demonstrating a relatively high level of accuracy but with notable fluctuations. The GA-BP model, when predicting the surface HAZ and the groove width, achieves errors of 4.5% and 2.7%, respectively, which are lower when compared to the BP model, indicating a higher predictive accuracy. The GA-BP model established in this study unveils the intrinsic connection between process parameters and processing quality, providing a novel means for an effective quality prediction in the processing of CFRP.
- 13 June 2024
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 36 (3)
High-accuracy predictive model for carbon fiber reinforced polymer laser machining quality using neural networks
In order to address the issue of thermal damage induced by laser processing of carbon fiber reinforced polymer (CFRP), researchers have conducted an optimization study of process parameters in the laser processing of CFRP. Their aim is to elucidate the relationship between process parameters and processing quality to minimize thermal damage. However, during laser processing, there exists a complex nonlinear relationship between process parameters and processing quality, making it challenging to establish high-precision predictive models, while the intrinsic connection between these two aspects remains incompletely revealed. In light of this, this study proposes utilization of machine learning techniques to explore the inherent relationship between process parameters and processing quality and establishes a 5-13-5 type back-propagation (BP) neural network predictive model. Subsequently, genetic algorithms are employed to optimize the weights and thresholds of the BP neural network, and the model is then subjected to validation. The results indicate that the BP neural network predictive model yields average errors of 5% for surface heat-affected zone (HAZ), 2.9% for groove width, 5.9% for cross-sectional HAZ, 1.8% for groove depth, and 4.5% for aspect ratio, demonstrating a relatively high level of accuracy but with notable fluctuations. The GA-BP model, when predicting the surface HAZ and the groove width, achieves errors of 4.5% and 2.7%, respectively, which are lower when compared to the BP model, indicating a higher predictive accuracy. The GA-BP model established in this study unveils the intrinsic connection between process parameters and processing quality, providing a novel means for an effective quality prediction in the processing of CFRP.
- 23 January 2024
- Published by Springer Nature in Applied Physics A
- Vol. 130 (2) , 1-13
Scribing of surface-braided CFRP with picosecond laser: Thermal damage formation and removal mechanism analysis
- 23 January 2024
- Published by Springer Nature in Applied Physics A
- Vol. 130 (2) , 1-13
Scribing of surface-braided CFRP with picosecond laser: Thermal damage formation and removal mechanism analysis
- Open Access
- 22 January 2024
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 36 (1)
Numerical investigations of water jet-guided laser cutting of silicon
To investigate the interaction mechanism between a laser, water jet, and substrate, a model is developed to simulate the temperature field evolution and removal process during water jet-guided laser (WJGL) cutting of silicon. The model accounted for the temperature-dependent properties of the silicon absorption coefficient, as well as the physical processes of solid-liquid-gas phase change. A three-dimensional finite volume model of WJGL cutting of silicon is created, incorporating laser energy input, water jet impact-cooling, and silicon phase transition and removal. The volume of fluid (VOF) method is employed to trace the interphase interface and obtain the groove shape. The validity of the model is verified by comparing simulation results with experimental data. The simulation results show that the groove cross section is characterized by a “V” shape. The groove depth nonlinearly increases from 52 to 385 μm with an increasing number of cuts. Additionally, the residual temperature of the silicon substrate rises from 837 to 1345 K as the number of scans increases from 1 to 10. The findings offer valuable insights into WJGL cutting research, specifically shedding light on the intricate details of the laser-water jet-substrate interaction mechanism.
- 22 January 2024
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 36 (1)
Open AccessNumerical investigations of water jet-guided laser cutting of silicon
To investigate the interaction mechanism between a laser, water jet, and substrate, a model is developed to simulate the temperature field evolution and removal process during water jet-guided laser (WJGL) cutting of silicon. The model accounted for the temperature-dependent properties of the silicon absorption coefficient, as well as the physical processes of solid-liquid-gas phase change. A three-dimensional finite volume model of WJGL cutting of silicon is created, incorporating laser energy input, water jet impact-cooling, and silicon phase transition and removal. The volume of fluid (VOF) method is employed to trace the interphase interface and obtain the groove shape. The validity of the model is verified by comparing simulation results with experimental data. The simulation results show that the groove cross section is characterized by a “V” shape. The groove depth nonlinearly increases from 52 to 385 μm with an increasing number of cuts. Additionally, the residual temperature of the silicon substrate rises from 837 to 1345 K as the number of scans increases from 1 to 10. The findings offer valuable insights into WJGL cutting research, specifically shedding light on the intricate details of the laser-water jet-substrate interaction mechanism.
- 10 December 2023
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
- Vol. 44 (7-8) , 311-329
Investigation on mechanism for water-gas jet-assisted laser processing of carbon fiber-reinforced polymer
Water-jet-assisted laser processing suffers from energy losses, while gas-assisted laser processing encounters insufficient cooling. To better address these issues, this paper proposes a method of water-gas jet-assisted laser processing for carbon fiber-reinforced polymer (CFRP) materials to explore the thermal damage control effect in laser processing of CFRP. The method of water-air jet-assisted laser processing involves the formation of a water layer by the impact of a water jet on the workpiece, followed by the addition of auxiliary gas above the water layer to impact it. This method effectively suppresses water splashing and debris interference, thus enhancing the quality of CFRP processing. The present research investigates the effects of air pressure, water pressure, gas jet-target distance, and gas nozzle diameter on CFRP processing quality through single-factor experiments, which are subsequently optimized using orthogonal experiments. Furthermore, a three-dimensional model for water-gas jet-assisted laser processing was established in this study, and the flow field was analyzed using computational fluid dynamics software, aiming to explore methods for optimizing the flow field. Experimental and simulation results demonstrate that the water-air jet-assisted laser processing technique ensures both the cooling effect of water and minimizes the impact of the water layer on the laser transmission path, thereby facilitating the achievement of thermal balance removal in CFRP.
- 10 December 2023
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
- Vol. 44 (7-8) , 311-329
Investigation on mechanism for water-gas jet-assisted laser processing of carbon fiber-reinforced polymer
Water-jet-assisted laser processing suffers from energy losses, while gas-assisted laser processing encounters insufficient cooling. To better address these issues, this paper proposes a method of water-gas jet-assisted laser processing for carbon fiber-reinforced polymer (CFRP) materials to explore the thermal damage control effect in laser processing of CFRP. The method of water-air jet-assisted laser processing involves the formation of a water layer by the impact of a water jet on the workpiece, followed by the addition of auxiliary gas above the water layer to impact it. This method effectively suppresses water splashing and debris interference, thus enhancing the quality of CFRP processing. The present research investigates the effects of air pressure, water pressure, gas jet-target distance, and gas nozzle diameter on CFRP processing quality through single-factor experiments, which are subsequently optimized using orthogonal experiments. Furthermore, a three-dimensional model for water-gas jet-assisted laser processing was established in this study, and the flow field was analyzed using computational fluid dynamics software, aiming to explore methods for optimizing the flow field. Experimental and simulation results demonstrate that the water-air jet-assisted laser processing technique ensures both the cooling effect of water and minimizes the impact of the water layer on the laser transmission path, thereby facilitating the achievement of thermal balance removal in CFRP.
- Open Access
- 8 November 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 134 (18)
Study on thermal effects of high-power laser-coupled water jets and the influence on the stability of water jets
In water-guided laser technology, the stability of water jets is crucial to ensure the efficient transmission of laser energy. However, the thermal effects generated when high-power lasers are coupled with water jets are bound to impact the stability of the water jets, thus becoming a critical issue that restricts the development of high-power water-guided laser technology. In addressing this issue, this paper establishes a temperature model for coupling high-power lasers with water jets. Subsequently, with validation of the model's effectiveness through experimental data, simulations are conducted to analyze the temperature distribution within the water jet. During the simulation process, lasers with different parameters were coupled with water jets to analyze the temperature variation law of the water jets. Additionally, the maximum laser power coupled with water jets of different lengths was solved. Based on the calculated temperature values of the water jet, simulate the evolution of its profile over time when it has an initial temperature gradient. Simultaneously, perform a three-dimensional reconstruction of the obtained perturbed profile and conduct ray tracing to analyze the laser's transmission losses within the perturbed profile. Finally, high-speed cameras are utilized to capture the profile of the water jet, validating the laser-induced fragmentation behavior in the water jet. The research findings will provide a significant reference value for selecting laser parameters and controlling thermal effects in water-guided high-power technology.
- 8 November 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 134 (18)
Open AccessStudy on thermal effects of high-power laser-coupled water jets and the influence on the stability of water jets
In water-guided laser technology, the stability of water jets is crucial to ensure the efficient transmission of laser energy. However, the thermal effects generated when high-power lasers are coupled with water jets are bound to impact the stability of the water jets, thus becoming a critical issue that restricts the development of high-power water-guided laser technology. In addressing this issue, this paper establishes a temperature model for coupling high-power lasers with water jets. Subsequently, with validation of the model's effectiveness through experimental data, simulations are conducted to analyze the temperature distribution within the water jet. During the simulation process, lasers with different parameters were coupled with water jets to analyze the temperature variation law of the water jets. Additionally, the maximum laser power coupled with water jets of different lengths was solved. Based on the calculated temperature values of the water jet, simulate the evolution of its profile over time when it has an initial temperature gradient. Simultaneously, perform a three-dimensional reconstruction of the obtained perturbed profile and conduct ray tracing to analyze the laser's transmission losses within the perturbed profile. Finally, high-speed cameras are utilized to capture the profile of the water jet, validating the laser-induced fragmentation behavior in the water jet. The research findings will provide a significant reference value for selecting laser parameters and controlling thermal effects in water-guided high-power technology.
- 30 April 2023
- Published by Korea Tourism Research Association in International Journal of Tourism and Hospitality Research
- Vol. 37 (4) , 85-94
Forecasting CPI of restaurants and hotels in Korea using the seasonal autoregressive integrated moving average (SARIMA) model
Economic development is influenced by many factors, one of which is the inflation rate. The consumer price index (CPI) is a commonly used indicator for measuring the inflation rate. In recent years, CPI prediction has attracted the attention of many scholars due to its excellent measure of macroeconomic performance. It is very essential to develop an accurate and precise forecasting model. This research fitted and forecasted the CPI of restaurants and hotels in South Korea using the seasonal autoregressive integrated moving average (SARIMA) model. In contrast to other time series models, the SARIMA model incorporates the seasonal component of a time series to improve the accuracy of its forecasts. The time series data were obtained from the website of Statistics Korea (KOSTAT) for the monthly CPI of restaurants and hotels in South Korea from January 2010 to December 2022. Data were analyzed using R-Statistics software and EViews. In this paper, the best model was based on the results of mean absolute percentage error (MAPE) and R2. A detailed description of model selection and predictive accuracy is provided. The findings suggest that the proposed research approach achieves good prediction accuracy from a range of different SARIMA models. Therefore, the developed SARIMA model can be considered for forecasting of monthly CPI of restaurants and hotels in South Korea.
- 30 April 2023
- Published by Korea Tourism Research Association in International Journal of Tourism and Hospitality Research
- Vol. 37 (4) , 85-94
Forecasting CPI of restaurants and hotels in Korea using the seasonal autoregressive integrated moving average (SARIMA) model
Economic development is influenced by many factors, one of which is the inflation rate. The consumer price index (CPI) is a commonly used indicator for measuring the inflation rate. In recent years, CPI prediction has attracted the attention of many scholars due to its excellent measure of macroeconomic performance. It is very essential to develop an accurate and precise forecasting model. This research fitted and forecasted the CPI of restaurants and hotels in South Korea using the seasonal autoregressive integrated moving average (SARIMA) model. In contrast to other time series models, the SARIMA model incorporates the seasonal component of a time series to improve the accuracy of its forecasts. The time series data were obtained from the website of Statistics Korea (KOSTAT) for the monthly CPI of restaurants and hotels in South Korea from January 2010 to December 2022. Data were analyzed using R-Statistics software and EViews. In this paper, the best model was based on the results of mean absolute percentage error (MAPE) and R2. A detailed description of model selection and predictive accuracy is provided. The findings suggest that the proposed research approach achieves good prediction accuracy from a range of different SARIMA models. Therefore, the developed SARIMA model can be considered for forecasting of monthly CPI of restaurants and hotels in South Korea.