Omer Ikram Ul Haq
Research Subjects
Omer Ikram Ul Haq has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Luca Peretti
KTH Royal Institute of Technology, Stockholm, Sweden
4 shared publications - Yixuan Wu
Division of Electric Power and Energy Systems, KTH Royal Institute of Technology, Stockholm, Sweden
3 shared publications - Sjoerd G. Bosga
ABB Corporate Research
2 shared publications - Gustaf Falk Olson
Division of Electric Power and Energy Systems, KTH Royal Institute of Technology, Stockholm, Sweden
1 shared publication R. S. Kanchan
Department of Energy Conversion, ABB Corporate Research, Vsters, Sweden
1 shared publication- R. S. Kanchan
ABB Corporate Research Center, Vsters, Sweden
1 shared publication
Latest Publications
- Open Access
- 30 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 22831-22841
Equivalent Circuit Parameter Measurement of Multiphase Induction Machine by Exploitation of Space Harmonic Relations
A multiphase induction machine model using vector space decomposition provides insights into many space harmonics through decoupled reference frames. In order to utilize this potential of the multiphase machine, the parameters of each vector space must be identified. These parameters are usually identified using the no-load and locked rotor test of each torque-producing vector space. However, these tests do not provide a method for identifying stator leakage inductances, which have comparable magnitudes to the magnetizing inductances for higher-order vector spaces. Thus, the magnetizing current can not be neglected during the locked-rotor test. This paper proposes an accurate method for identifying the T-model parameters of a multiphase induction machine, which can be conveniently translated into the model of choice. The proposed method use harmonic relations to segregate the stator leakage inductance from the total stator inductance, enabling accurate locked-rotor and partial-load tests for the measurement of rotor side parameters. Lastly, a 9-phase induction machine is used for the evaluation of the proposed parameter measurement method. These measured parameters are used for the field-oriented control of each torque-producing vector space, whose performances are analyzed by quantifying the measured output torque error and linearity.
- 30 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 22831-22841
Open AccessEquivalent Circuit Parameter Measurement of Multiphase Induction Machine by Exploitation of Space Harmonic Relations
A multiphase induction machine model using vector space decomposition provides insights into many space harmonics through decoupled reference frames. In order to utilize this potential of the multiphase machine, the parameters of each vector space must be identified. These parameters are usually identified using the no-load and locked rotor test of each torque-producing vector space. However, these tests do not provide a method for identifying stator leakage inductances, which have comparable magnitudes to the magnetizing inductances for higher-order vector spaces. Thus, the magnetizing current can not be neglected during the locked-rotor test. This paper proposes an accurate method for identifying the T-model parameters of a multiphase induction machine, which can be conveniently translated into the model of choice. The proposed method use harmonic relations to segregate the stator leakage inductance from the total stator inductance, enabling accurate locked-rotor and partial-load tests for the measurement of rotor side parameters. Lastly, a 9-phase induction machine is used for the evaluation of the proposed parameter measurement method. These measured parameters are used for the field-oriented control of each torque-producing vector space, whose performances are analyzed by quantifying the measured output torque error and linearity.
- 1 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 40 (2) , 1411-1421
Minimum Torque Dip Pole Transition in Variable Phase-Pole Machines With Voltage Limitation
Induction machine-based multiphase electrical machines combine the robustness and reliability of well-known induction machines with the benefits of additional degrees of freedom, such as potential higher torque density and true fault tolerance. The subcategory of variable phase-pole machines allows extending the operational torque and speed range with the same voltage and current limits by changing the number of magnetic poles through control without hardware reconfiguration. Maintaining the torque throughout the operation is vital for many applications. The question of maintaining torque during a pole transition still needs to be answered, especially concerning the electric limitations. This paper's proposed pole transition strategy minimizes the torque dip during the pole transition. Field weakening is added to the control scheme to accommodate the voltage limitation. Experimentally controlled, loaded, and scheduled pole transitions demonstrate the capabilities of the proposed strategy with and without voltage limitation.
- 1 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 40 (2) , 1411-1421
Minimum Torque Dip Pole Transition in Variable Phase-Pole Machines With Voltage Limitation
Induction machine-based multiphase electrical machines combine the robustness and reliability of well-known induction machines with the benefits of additional degrees of freedom, such as potential higher torque density and true fault tolerance. The subcategory of variable phase-pole machines allows extending the operational torque and speed range with the same voltage and current limits by changing the number of magnetic poles through control without hardware reconfiguration. Maintaining the torque throughout the operation is vital for many applications. The question of maintaining torque during a pole transition still needs to be answered, especially concerning the electric limitations. This paper's proposed pole transition strategy minimizes the torque dip during the pole transition. Field weakening is added to the control scheme to accommodate the voltage limitation. Experimentally controlled, loaded, and scheduled pole transitions demonstrate the capabilities of the proposed strategy with and without voltage limitation.
- Open Access
- 11 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 40049-40063
Enabling Variable Phase-Pole Drives With the Harmonic Plane Decomposition
Magnet-free variable phase-pole machines are competitive alternatives in electric vehicles where torque-speed operating region, reliability, cost, and energy efficiency are key metrics. However, their modeling and control have so far relied on existing fixed-phase and pole-symmetrical models, limiting their drive capabilities especially when switching the number of poles on the fly. This paper establishes the harmonic plane decomposition theory as a space-discrete Fourier transformation interpretation of the Clarke transformation, decomposing all pole-pair fields into a fixed number of orthogonal subspaces with invariant parameters. The model remains unaltered for all phase-pole configurations, guaranteeing continuity even under phase-pole transitions. Relations of the state and input space vectors, and model parameters to those of the vector space decomposition theory used for multiphase machines are established via the use of the complex winding factor. Experiments confirm the modeling theory and demonstrate its practical usefulness by performing a field-oriented-controlled phase-pole transition. Non-trivial configurations with more than one slot/pole/phase and a fractional phase number are also demonstrated.
- 11 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 40049-40063
Open AccessEnabling Variable Phase-Pole Drives With the Harmonic Plane Decomposition
Magnet-free variable phase-pole machines are competitive alternatives in electric vehicles where torque-speed operating region, reliability, cost, and energy efficiency are key metrics. However, their modeling and control have so far relied on existing fixed-phase and pole-symmetrical models, limiting their drive capabilities especially when switching the number of poles on the fly. This paper establishes the harmonic plane decomposition theory as a space-discrete Fourier transformation interpretation of the Clarke transformation, decomposing all pole-pair fields into a fixed number of orthogonal subspaces with invariant parameters. The model remains unaltered for all phase-pole configurations, guaranteeing continuity even under phase-pole transitions. Relations of the state and input space vectors, and model parameters to those of the vector space decomposition theory used for multiphase machines are established via the use of the complex winding factor. Experiments confirm the modeling theory and demonstrate its practical usefulness by performing a field-oriented-controlled phase-pole transition. Non-trivial configurations with more than one slot/pole/phase and a fractional phase number are also demonstrated.
- 8 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 39 (2) , 1245-1254
Generalized Harmonic Injection Strategy for Multiphase Induction Machine Control
A multiphase induction machine model using vector space decomposition provides insights into many space harmonics through decoupled reference frames. These decoupled reference frames host specific space vectors related to particular space harmonics. Based on the physical winding configuration, these vector spaces can be excited independently and simultaneously for the production of torque. However, this approach may result in beat oscillations due to interference between excited vector spaces if proper synchronization of vector spaces is not maintained. This paper describes this phenomenon through experimental tests. Furthermore, a solution eliminating the beat oscillations is proposed while optimizing the stator current or rotor flux linkage peaks. The effectiveness of the solution is experimentally verified on a 9-phase induction machine.
- 8 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 39 (2) , 1245-1254
Generalized Harmonic Injection Strategy for Multiphase Induction Machine Control
A multiphase induction machine model using vector space decomposition provides insights into many space harmonics through decoupled reference frames. These decoupled reference frames host specific space vectors related to particular space harmonics. Based on the physical winding configuration, these vector spaces can be excited independently and simultaneously for the production of torque. However, this approach may result in beat oscillations due to interference between excited vector spaces if proper synchronization of vector spaces is not maintained. This paper describes this phenomenon through experimental tests. Furthermore, a solution eliminating the beat oscillations is proposed while optimizing the stator current or rotor flux linkage peaks. The effectiveness of the solution is experimentally verified on a 9-phase induction machine.