Chuanfei Ding
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chuanfei Ding has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Jianping An
Beijing Institute of Technology
8 shared publications - Xiang Gao
School of Cyberspace Science and Technology, Beijing Institute of Technology, Beijing 100081, China
8 shared publications - Xiangyuan Bu
Beijing Institute of Technology
7 shared publications - Wenfei Tang
School of Information and Electronics, Beijing Institute of Technology, Beijing, China
4 shared publications - Chao Zhu
Beijing Institute of Technology
3 shared publications Heng Liu
School of Information and Electronics, Beijing Institute of Technology, Beijing, China
3 shared publications
Latest Publications
- 4 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (7) , 6234-6248
Large-Frequency-Ratio Dual-Band Shared-Aperture Conformal Transmit-Reflect-Array Antenna With Independent Beam Control for UAV-Based Space–Air–Ground Emergency Communication Networks
This paper proposes a large-frequency-ratio (140 GHz : 35 GHz) dual-band shared-aperture conformal transmit-reflect-array antenna (CTRA) for unmanned aerial vehicle (UAV)-based emergency communication applications. A 3×3 cascaded multilayer frequency selective surface (FSS) is designed as the low-frequency (35 GHz) ground plane while also enabling transmission of high-frequency waves (140 GHz). Subsequently, a radius-limited double-split ring is placed underneath the cascaded FSS layers to form the transmissive element (TE, defined as Unit-1). In addition, a miniaturized multilayer FSS unit is proposed as another TE (defined as Unit-2) at 140-GHz band and arranged around Unit-1 to form a full ground plane for the split ring, constituting a complete reflective element at 35-GHz band. Independent modulation of the reflection/transmission coefficients can be achieved by rotating the split ring and tuning the TE dimensions, respectively. Moreover, the joint operation of the two TEs can effectively suppress the elevated sidelobe levels caused by the larger frequency ratio. To validate the design, a prototype of the whole CTRA architecture was fabricated and measured. Experimental results have indicated the proposed CTRA exhibits a peak transmitted gain of 34.3 dBi at the 140-GHz band and a peak reflected gain of 22.8 dBi at the 35-GHz band, which demonstrates its significant potential for UAV-based space-air-ground emergency communication networks.
- 4 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (7) , 6234-6248
Large-Frequency-Ratio Dual-Band Shared-Aperture Conformal Transmit-Reflect-Array Antenna With Independent Beam Control for UAV-Based Space–Air–Ground Emergency Communication Networks
This paper proposes a large-frequency-ratio (140 GHz : 35 GHz) dual-band shared-aperture conformal transmit-reflect-array antenna (CTRA) for unmanned aerial vehicle (UAV)-based emergency communication applications. A 3×3 cascaded multilayer frequency selective surface (FSS) is designed as the low-frequency (35 GHz) ground plane while also enabling transmission of high-frequency waves (140 GHz). Subsequently, a radius-limited double-split ring is placed underneath the cascaded FSS layers to form the transmissive element (TE, defined as Unit-1). In addition, a miniaturized multilayer FSS unit is proposed as another TE (defined as Unit-2) at 140-GHz band and arranged around Unit-1 to form a full ground plane for the split ring, constituting a complete reflective element at 35-GHz band. Independent modulation of the reflection/transmission coefficients can be achieved by rotating the split ring and tuning the TE dimensions, respectively. Moreover, the joint operation of the two TEs can effectively suppress the elevated sidelobe levels caused by the larger frequency ratio. To validate the design, a prototype of the whole CTRA architecture was fabricated and measured. Experimental results have indicated the proposed CTRA exhibits a peak transmitted gain of 34.3 dBi at the 140-GHz band and a peak reflected gain of 22.8 dBi at the 35-GHz band, which demonstrates its significant potential for UAV-based space-air-ground emergency communication networks.
- 24 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (2) , 1308-1322
A Spherically Conformal Transmit-Array Antenna With High Gain and 2-D Steerable Beam for Air-to-Ground Emergency Communication Applications
This paper proposes, for the first time, a spherically conformal transmit-array antenna (SCTA) with high gain and two-dimensional (2D) steerable directional beams for unmanned aerial vehicle (UAV)-based air-to-ground emergency communication applications. The multifaced conformal antenna architecture consists of 5×5 identical-sized planar transmitsubarrays (TSAs), each integrating 6×6 cross-dipole-shaped elements of metasurface. When illuminated by a feed source, each TSA generates a distinctively oriented sub-beam. By continuously rotating the feed source to illuminate the selected TSAs, the proposed SCTA synthesizes a high-directivity beam and achieves continuous 2D beam steering capability and achieves continuous 2D beam steering capability. A terrestrial-inspired spherical topology is proposed with strategic array arrangement, mapping all TSAs onto predefined latitude-longitude coordinates across the doubly curved surface. A vector synthesis method is proposed to obtain the beam direction distribution for all TSAs. Due to the distinct beam directions of the TSAs and their discontinuous spatial locations, abrupt compensation phases calculated at the inter-TSA boundaries cause severe performance degradation. To tackle this issue, a phase smoothing method is proposed to enhance the gain and suppress the sidelobe levels. To validate the design, a prototype of the whole SCTA architecture was fabricated and measured. Experimental results have indicated the proposed SCTA exhibits a peak gain of 20.6 dBi at the 30-GHz band and a continuous 2D beam steering range of ±15° with a 1.7-dB average steering loss, which will be very attractive for UAV-based emergency communication applications.
- 24 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (2) , 1308-1322
A Spherically Conformal Transmit-Array Antenna With High Gain and 2-D Steerable Beam for Air-to-Ground Emergency Communication Applications
This paper proposes, for the first time, a spherically conformal transmit-array antenna (SCTA) with high gain and two-dimensional (2D) steerable directional beams for unmanned aerial vehicle (UAV)-based air-to-ground emergency communication applications. The multifaced conformal antenna architecture consists of 5×5 identical-sized planar transmitsubarrays (TSAs), each integrating 6×6 cross-dipole-shaped elements of metasurface. When illuminated by a feed source, each TSA generates a distinctively oriented sub-beam. By continuously rotating the feed source to illuminate the selected TSAs, the proposed SCTA synthesizes a high-directivity beam and achieves continuous 2D beam steering capability and achieves continuous 2D beam steering capability. A terrestrial-inspired spherical topology is proposed with strategic array arrangement, mapping all TSAs onto predefined latitude-longitude coordinates across the doubly curved surface. A vector synthesis method is proposed to obtain the beam direction distribution for all TSAs. Due to the distinct beam directions of the TSAs and their discontinuous spatial locations, abrupt compensation phases calculated at the inter-TSA boundaries cause severe performance degradation. To tackle this issue, a phase smoothing method is proposed to enhance the gain and suppress the sidelobe levels. To validate the design, a prototype of the whole SCTA architecture was fabricated and measured. Experimental results have indicated the proposed SCTA exhibits a peak gain of 20.6 dBi at the 30-GHz band and a continuous 2D beam steering range of ±15° with a 1.7-dB average steering loss, which will be very attractive for UAV-based emergency communication applications.
- 24 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (12) , 4865-4869
A Superstrate-Loaded Conformal Array Antenna With Subarray-Augmented Imaging Algorithm for Microwave Brain Hemorrhage Diagnostic Systems
This letter presents a conformal microstrip array antenna and an associated imaging algorithm for microwave brain hemorrhage diagnostic systems. Each antenna element utilizes a substrate-superstrate stacked structure to achieve miniaturized dimensions, good impedance match, and suppression of lateral energy emission (caused by surface waves). Then, a Subarray-Augmented Born Iterative Method (SA-BIM) is developed to improve the imaging accuracy. To validate the proposed antenna and imaging algorithm, a simplified single-tissue 2D head prototype was fabricated and measured. Experimental results show that the proposed imaging algorithm achieves a low mean squared error of 0.062 and a high structural similarity index of 0.696, indicating over 60% enhancement in contrast and fidelity compared to traditional BIM. The reconstructed images accurately identify the target (simulated as hemorrhagic lesions) locations within the head phantom, demonstrating the effectiveness of the proposed antenna and imaging algorithm.
- 24 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (12) , 4865-4869
A Superstrate-Loaded Conformal Array Antenna With Subarray-Augmented Imaging Algorithm for Microwave Brain Hemorrhage Diagnostic Systems
This letter presents a conformal microstrip array antenna and an associated imaging algorithm for microwave brain hemorrhage diagnostic systems. Each antenna element utilizes a substrate-superstrate stacked structure to achieve miniaturized dimensions, good impedance match, and suppression of lateral energy emission (caused by surface waves). Then, a Subarray-Augmented Born Iterative Method (SA-BIM) is developed to improve the imaging accuracy. To validate the proposed antenna and imaging algorithm, a simplified single-tissue 2D head prototype was fabricated and measured. Experimental results show that the proposed imaging algorithm achieves a low mean squared error of 0.062 and a high structural similarity index of 0.696, indicating over 60% enhancement in contrast and fidelity compared to traditional BIM. The reconstructed images accurately identify the target (simulated as hemorrhagic lesions) locations within the head phantom, demonstrating the effectiveness of the proposed antenna and imaging algorithm.
- 6 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (10) , 3559-3563
A Dual-Polarized Ultrawideband Conformal Antenna for Microwave Brain Imaging
This letter presents a dual-polarized ultrawideband conformal antenna for microwave brain imaging systems. The proposed antenna fed from two individual ports features a square slot with rounded corners etched on the ground plane, which can operate in dual-linear-polarized radiation modes. To widen the operating bandwidth, a circular ring together with a cross-shaped patch are loaded at the slot center. Two open-ended microstrip networks with their geometries as same as those of the feeding structures, are utilized for guaranteeing symmetric current modes and thus considerably reducing cross-polarization levels. Conformally attached to the human head, the antenna utilizes the loading effect of brain tissue to direct its beam towards the brain. While maintaining a low profile of 0.0004λ0 without any reflector, it achieves unidirectional radiation with a front-to-back ratio over 11 dB. The antenna exhibits effective signal penetration into the human head and fidelity factors above 80% for stable pulse transmission with minimal distortion. The specific absorption rate analysis validates the electromagnetic safety for human exposure. The fabricated prototype exhibits an ultrawide overlapped bandwidth of approximately 0.54–2.47 GHz and a fractional bandwidth of around 129% for both polarizations. These results validate the antenna design and its great potential for microwave brain imaging applications.
- 6 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (10) , 3559-3563
A Dual-Polarized Ultrawideband Conformal Antenna for Microwave Brain Imaging
This letter presents a dual-polarized ultrawideband conformal antenna for microwave brain imaging systems. The proposed antenna fed from two individual ports features a square slot with rounded corners etched on the ground plane, which can operate in dual-linear-polarized radiation modes. To widen the operating bandwidth, a circular ring together with a cross-shaped patch are loaded at the slot center. Two open-ended microstrip networks with their geometries as same as those of the feeding structures, are utilized for guaranteeing symmetric current modes and thus considerably reducing cross-polarization levels. Conformally attached to the human head, the antenna utilizes the loading effect of brain tissue to direct its beam towards the brain. While maintaining a low profile of 0.0004λ0 without any reflector, it achieves unidirectional radiation with a front-to-back ratio over 11 dB. The antenna exhibits effective signal penetration into the human head and fidelity factors above 80% for stable pulse transmission with minimal distortion. The specific absorption rate analysis validates the electromagnetic safety for human exposure. The fabricated prototype exhibits an ultrawide overlapped bandwidth of approximately 0.54–2.47 GHz and a fractional bandwidth of around 129% for both polarizations. These results validate the antenna design and its great potential for microwave brain imaging applications.
- 18 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (8) , 5166-5181
A Helmet-Based Hemispherical-Conformal Wearable Array Antenna With Broad Bandwidth, Wide-Angle Coverage, and Reconfigurable Dual Circular Polarizations for WBAN Applications
This paper presents a helmet-based hemispherical-conformal wearable array antenna with broad bandwidth, wide-angle coverage and reconfigurable dual circular polarizations (CPs) that is suitable for wireless body area network (WBAN) applications. First, a broadband and polarization-reconfigurable conformal radiating element is designed, which features a single-feed reconfigurable crossed dipole incorporated with parasitic patches above a ground plane for attaining unidirectional radiations. By integrating four PIN diodes on four arms of the crossed dipole, the element can flexibly switch its polarization states among two orthogonal CP modes. Four sector-shaped parasitic patches placed in four quadrants of the crossed dipole help to expand the operating bandwidth. Furthermore, we design a 12-element helmet-based hemispherical-conformal polarization-reconfigurable wearable array that is arranged in special configuration for increasing the gain, coverage range and orientation flexibility for WBAN systems. The measured results show the proposed conformal wearable array exhibits an overlapped 3-dB axial-ratio bandwidth of up to 29.6% and -10-dB impedance bandwidth of 69.8% at around 3 GHz for two reconfigurable CP modes. Besides, it has a relatively wide beam coverage range of 110° × 360 ° and a peak measured gain of more than 8 dBi for both polarization modes.
- 18 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (8) , 5166-5181
A Helmet-Based Hemispherical-Conformal Wearable Array Antenna With Broad Bandwidth, Wide-Angle Coverage, and Reconfigurable Dual Circular Polarizations for WBAN Applications
This paper presents a helmet-based hemispherical-conformal wearable array antenna with broad bandwidth, wide-angle coverage and reconfigurable dual circular polarizations (CPs) that is suitable for wireless body area network (WBAN) applications. First, a broadband and polarization-reconfigurable conformal radiating element is designed, which features a single-feed reconfigurable crossed dipole incorporated with parasitic patches above a ground plane for attaining unidirectional radiations. By integrating four PIN diodes on four arms of the crossed dipole, the element can flexibly switch its polarization states among two orthogonal CP modes. Four sector-shaped parasitic patches placed in four quadrants of the crossed dipole help to expand the operating bandwidth. Furthermore, we design a 12-element helmet-based hemispherical-conformal polarization-reconfigurable wearable array that is arranged in special configuration for increasing the gain, coverage range and orientation flexibility for WBAN systems. The measured results show the proposed conformal wearable array exhibits an overlapped 3-dB axial-ratio bandwidth of up to 29.6% and -10-dB impedance bandwidth of 69.8% at around 3 GHz for two reconfigurable CP modes. Besides, it has a relatively wide beam coverage range of 110° × 360 ° and a peak measured gain of more than 8 dBi for both polarization modes.
- 12 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (9) , 7077-7088
A Balloon Conformal Heterogeneous Array Antenna with Ultrawide Bandwidth and Half-Space Beam Coverage
This paper presents a balloon-based conformal heterogeneous array antenna with ultrawide bandwidth and half-space beam coverage for emergency communication applications. The antenna consists of two types of cylindrically conformal arrays, each of which contains nine broadside or endfire subarrays. By virtue of one-dimensional full-azimuthal beam switching and combining the radiation patterns of those two arrays, one yields an entire half-space beam coverage. To increase the bandwidth and gain while maintaining low profiles, the broadside subarray utilizes 1×4 dumbbell-shaped full-wavelength dipoles cross-fed in series and backed by a miniaturized artificial magnetic conductor; the endfire subarray employs 2×3 size-tapered half-wavelength dipoles with optimized spacing to achieve the desired radiation characteristics. To validate the designs, the prototypes of two conformal subarrays with one shared aperture were fabricated and measured. Experimental results have indicated the proposed conformal heterogeneous array exhibit an overlapped bandwidth of 720 MHz and 360°×108° beam coverage at the 2.4-GHz band, which shows the superior performance and its huge potential in mountainous and dense-forest communication applications.
- 12 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (9) , 7077-7088
A Balloon Conformal Heterogeneous Array Antenna with Ultrawide Bandwidth and Half-Space Beam Coverage
This paper presents a balloon-based conformal heterogeneous array antenna with ultrawide bandwidth and half-space beam coverage for emergency communication applications. The antenna consists of two types of cylindrically conformal arrays, each of which contains nine broadside or endfire subarrays. By virtue of one-dimensional full-azimuthal beam switching and combining the radiation patterns of those two arrays, one yields an entire half-space beam coverage. To increase the bandwidth and gain while maintaining low profiles, the broadside subarray utilizes 1×4 dumbbell-shaped full-wavelength dipoles cross-fed in series and backed by a miniaturized artificial magnetic conductor; the endfire subarray employs 2×3 size-tapered half-wavelength dipoles with optimized spacing to achieve the desired radiation characteristics. To validate the designs, the prototypes of two conformal subarrays with one shared aperture were fabricated and measured. Experimental results have indicated the proposed conformal heterogeneous array exhibit an overlapped bandwidth of 720 MHz and 360°×108° beam coverage at the 2.4-GHz band, which shows the superior performance and its huge potential in mountainous and dense-forest communication applications.
- 12 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (4) , 3795-3800
A Quad-Polarization Reconfigurable Conformal Array of Wide Coverage Range and High Gain for Unmanned Aerial Vehicle Communications
This paper presents a quad-polarization reconfigurable multi-faceted conformal array of wide coverage range and high gain that is suitable for unmanned aerial vehicle (UAV) communication applications. The design features a sparse array layout comprised of three conformal subarrays, where each subarray includes nine quad-polarization reconfigurable radiating elements. The radiating element is a single-port excited patch radiator loaded by edge slots for size miniaturization and central shorting pin for biasing simplification, which is integrated with a low-complicity reconfigurable feeding network consisting of relatively few PIN-diodes and biasing lines. Using such miniaturized and high-efficiency element, a polarization reconfigurable conformal array protype is designed, fabricated and experimentally characterized. Simulation and measurement results have shown that, the presented conformal array exhibits a 3-dB axial-ratio bandwidth of up to 1.3% at around 1.5 GHz, and -10-dB impedance bandwidth of 7.7% for two circular-polarization modes and 7.3% for two linear-polarization modes, respectively. Besides, the realized gain is over 14 dBi for all reconfigurable polarization modes over a relatively wide beam coverage range of 50° × 180°.
- 12 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (4) , 3795-3800
A Quad-Polarization Reconfigurable Conformal Array of Wide Coverage Range and High Gain for Unmanned Aerial Vehicle Communications
This paper presents a quad-polarization reconfigurable multi-faceted conformal array of wide coverage range and high gain that is suitable for unmanned aerial vehicle (UAV) communication applications. The design features a sparse array layout comprised of three conformal subarrays, where each subarray includes nine quad-polarization reconfigurable radiating elements. The radiating element is a single-port excited patch radiator loaded by edge slots for size miniaturization and central shorting pin for biasing simplification, which is integrated with a low-complicity reconfigurable feeding network consisting of relatively few PIN-diodes and biasing lines. Using such miniaturized and high-efficiency element, a polarization reconfigurable conformal array protype is designed, fabricated and experimentally characterized. Simulation and measurement results have shown that, the presented conformal array exhibits a 3-dB axial-ratio bandwidth of up to 1.3% at around 1.5 GHz, and -10-dB impedance bandwidth of 7.7% for two circular-polarization modes and 7.3% for two linear-polarization modes, respectively. Besides, the realized gain is over 14 dBi for all reconfigurable polarization modes over a relatively wide beam coverage range of 50° × 180°.
- 5 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (11) , 8525-8536
A Balloon Conformal Array Antenna of Broadened Bandwidth, High Gain, and Steerable Directional Beam Fed by a Flexible Phase Shifting Network
This paper presents, for the first time, a balloon-based conformal array antenna for emergency communication applications in low-range hilly forest scenarios. Fed by a simple flexible phase shifting network, the antenna features broadened bandwidth, high gain and steerable directional beam, outperforming other electrically-thin conformal array antennas in terms of comprehensive performance. The basic array element is a cylindrically conformal microstrip patch antenna, whose bandwidth is widened by adding parasitic patches loaded by shorting pins for size miniaturization and mutual coupling reduction. Then, a 1×4 conformal subarray with parallel feeding network is designed and optimized for beam sharping in the elevation plane. To further increase the gain and enable beam steering for full azimuthal coverage, the balloon is surrounded by multiple 1×4 conformal subarrays and only four of them operates at a time. A flexible phase shifting network is designed for beam steering along the azimuthal direction. To validate the effectiveness of the designs, a prototype was fabricated and measured. Experimental results show the antenna exhibits a gain of around 15 dB and a bandwidth of 74 MHz at the 2.4-GHz band, which has demonstrated the good performance of the balloon conformal array antenna and its huge potential in low-range hilly forest communication applications.
- 5 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (11) , 8525-8536
A Balloon Conformal Array Antenna of Broadened Bandwidth, High Gain, and Steerable Directional Beam Fed by a Flexible Phase Shifting Network
This paper presents, for the first time, a balloon-based conformal array antenna for emergency communication applications in low-range hilly forest scenarios. Fed by a simple flexible phase shifting network, the antenna features broadened bandwidth, high gain and steerable directional beam, outperforming other electrically-thin conformal array antennas in terms of comprehensive performance. The basic array element is a cylindrically conformal microstrip patch antenna, whose bandwidth is widened by adding parasitic patches loaded by shorting pins for size miniaturization and mutual coupling reduction. Then, a 1×4 conformal subarray with parallel feeding network is designed and optimized for beam sharping in the elevation plane. To further increase the gain and enable beam steering for full azimuthal coverage, the balloon is surrounded by multiple 1×4 conformal subarrays and only four of them operates at a time. A flexible phase shifting network is designed for beam steering along the azimuthal direction. To validate the effectiveness of the designs, a prototype was fabricated and measured. Experimental results show the antenna exhibits a gain of around 15 dB and a bandwidth of 74 MHz at the 2.4-GHz band, which has demonstrated the good performance of the balloon conformal array antenna and its huge potential in low-range hilly forest communication applications.