WTWenfei Tang

Wenfei Tang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wenfei Tang has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Compact Dual-Port Dual-Polarized Ultrawideband Wearable Textile Antenna for Off-Body Communications in IoT-Based WBAN Scenarios

    by Kun Guo, Xiang Gao, Wenfei Tang, Xiangyuan Bu, Jianping An

    This article proposes, to the best of our knowledge, the first dual-port compact dual-polarized ultrawideband wearable textile antenna covering lower UHF bands for off-body communications in Internet-of-Things-based wireless body area network (IoT-based WBAN) scenarios. The antenna covers key bands for diverse services, including the 470–510 MHz LoRa WAN, 700 MHz offline emergency communication, 900 MHz NB-IoT, and 1–1.2 GHz satellite internet bands. The antenna adopts a square-ring loaded wide slot structure and a multi-mode resonant feeding structure to achieve ultrawideband operation. Moreover, it utilizes oppositely placed advanced microstrip feeding networks to excite the horizontal and vertical polarization modes, respectively, and four narrow slots around the wide slot to extend the current path, thus enabling a compact size of 0.30 × 0.28 × 0.0035 λl3 (where λl is the largest operating wavelength). Measured −10 dB impedance bandwidths are 119.1% (0.35–1.38 GHz) for Port 1 and 115.9% (0.39–1.37 GHz) for Port 2 on the human body, with more than 19 dB port isolation over the operating band. The measured average gains are about 4.21 dBi for Port 1 and 3.54 dBi for Port 2 on the human body, respectively. Specific absorption rate analysis confirms compliance with the IEEE C95.1 limit at 0.5 W input power. Wireless transmission experiments at IoT bands further validate reliable off-body links with excellent signal-to-noise ratios for both polarizations. The antenna shall be very attractive for off-body communications in IoT-based WBAN scenarios.

  • A Compact Textile Penta-Band Wearable Antenna Using Multimode Patch and Multiresonant Feeding for Off-Body Communications

    by Ziang Xu, Xiang Gao, Wenfei Tang, Kun Guo, Xiangyuan Bu, Jianping An

    This letter presents a compact textile penta-band wearable antenna for off-body communications. To resolve the challenge of implementing multiband operation with consistent polarization within limited volume, the proposed antenna design combines the techniques of multimode resonant patch and multi-resonant feeding. The upper radiating patch integrates a modified U-slot for enabling tri-band multimode resonance, while the middle-layer T-shaped feeding structure is loaded with two shorting pins and a notched square ring thus contributing two additional resonant bands via mode splitting. The antenna achieves a measured fractional operating bandwidth of 2.0%, 5.9%, 5.3%, 3.1% and 2.0% at 1.13, 1.62, 2.06, 2.62 and 2.88 GHz with |S11| < -10 dB, respectively. Far-field measurement results confirm identical polarization mode and stable broadside radiation patterns across all bands. On-body evaluations reveal that the specific absorption rate values are below 0.4 W/kg with the input power of 1 W, complying well with the safety limit. This antenna shall be very attractive for off-body communications.


  • A Helmet-Based Hemispherical-Conformal Wearable Array Antenna With Broad Bandwidth, Wide-Angle Coverage, and Reconfigurable Dual Circular Polarizations for WBAN Applications

    by Wenfei Tang, Xiang Gao, Chuanfei Ding, Ziang Xu, Kun Guo, Xiangyuan Bu, Jianping An

    This paper presents a helmet-based hemispherical-conformal wearable array antenna with broad bandwidth, wide-angle coverage and reconfigurable dual circular polarizations (CPs) that is suitable for wireless body area network (WBAN) applications. First, a broadband and polarization-reconfigurable conformal radiating element is designed, which features a single-feed reconfigurable crossed dipole incorporated with parasitic patches above a ground plane for attaining unidirectional radiations. By integrating four PIN diodes on four arms of the crossed dipole, the element can flexibly switch its polarization states among two orthogonal CP modes. Four sector-shaped parasitic patches placed in four quadrants of the crossed dipole help to expand the operating bandwidth. Furthermore, we design a 12-element helmet-based hemispherical-conformal polarization-reconfigurable wearable array that is arranged in special configuration for increasing the gain, coverage range and orientation flexibility for WBAN systems. The measured results show the proposed conformal wearable array exhibits an overlapped 3-dB axial-ratio bandwidth of up to 29.6% and -10-dB impedance bandwidth of 69.8% at around 3 GHz for two reconfigurable CP modes. Besides, it has a relatively wide beam coverage range of 110° × 360 ° and a peak measured gain of more than 8 dBi for both polarization modes.


  • A Balloon Conformal Heterogeneous Array Antenna with Ultrawide Bandwidth and Half-Space Beam Coverage

    by Chuanfei Ding, Xiang Gao, Wenfei Tang, Heng Liu, Chao Zhu, Xiangyuan Bu, Jianping An

    This paper presents a balloon-based conformal heterogeneous array antenna with ultrawide bandwidth and half-space beam coverage for emergency communication applications. The antenna consists of two types of cylindrically conformal arrays, each of which contains nine broadside or endfire subarrays. By virtue of one-dimensional full-azimuthal beam switching and combining the radiation patterns of those two arrays, one yields an entire half-space beam coverage. To increase the bandwidth and gain while maintaining low profiles, the broadside subarray utilizes 1×4 dumbbell-shaped full-wavelength dipoles cross-fed in series and backed by a miniaturized artificial magnetic conductor; the endfire subarray employs 2×3 size-tapered half-wavelength dipoles with optimized spacing to achieve the desired radiation characteristics. To validate the designs, the prototypes of two conformal subarrays with one shared aperture were fabricated and measured. Experimental results have indicated the proposed conformal heterogeneous array exhibit an overlapped bandwidth of 720 MHz and 360°×108° beam coverage at the 2.4-GHz band, which shows the superior performance and its huge potential in mountainous and dense-forest communication applications.


  • A Quad-Polarization Reconfigurable Conformal Array of Wide Coverage Range and High Gain for Unmanned Aerial Vehicle Communications

    by Wenfei Tang, Xiang Gao, Chuanfei Ding, Chao Zhu, Ruide Li, Buning Tian, Xiangyuan Bu, Jianping An

    This paper presents a quad-polarization reconfigurable multi-faceted conformal array of wide coverage range and high gain that is suitable for unmanned aerial vehicle (UAV) communication applications. The design features a sparse array layout comprised of three conformal subarrays, where each subarray includes nine quad-polarization reconfigurable radiating elements. The radiating element is a single-port excited patch radiator loaded by edge slots for size miniaturization and central shorting pin for biasing simplification, which is integrated with a low-complicity reconfigurable feeding network consisting of relatively few PIN-diodes and biasing lines. Using such miniaturized and high-efficiency element, a polarization reconfigurable conformal array protype is designed, fabricated and experimentally characterized. Simulation and measurement results have shown that, the presented conformal array exhibits a 3-dB axial-ratio bandwidth of up to 1.3% at around 1.5 GHz, and -10-dB impedance bandwidth of 7.7% for two circular-polarization modes and 7.3% for two linear-polarization modes, respectively. Besides, the realized gain is over 14 dBi for all reconfigurable polarization modes over a relatively wide beam coverage range of 50° × 180°.


  • A Balloon Conformal Array Antenna of Broadened Bandwidth, High Gain, and Steerable Directional Beam Fed by a Flexible Phase Shifting Network

    by Chuanfei Ding, Xiang Gao, Wenfei Tang, Heng Liu, Chao Zhu, Xiangyuan Bu, Jianping An

    This paper presents, for the first time, a balloon-based conformal array antenna for emergency communication applications in low-range hilly forest scenarios. Fed by a simple flexible phase shifting network, the antenna features broadened bandwidth, high gain and steerable directional beam, outperforming other electrically-thin conformal array antennas in terms of comprehensive performance. The basic array element is a cylindrically conformal microstrip patch antenna, whose bandwidth is widened by adding parasitic patches loaded by shorting pins for size miniaturization and mutual coupling reduction. Then, a 1×4 conformal subarray with parallel feeding network is designed and optimized for beam sharping in the elevation plane. To further increase the gain and enable beam steering for full azimuthal coverage, the balloon is surrounded by multiple 1×4 conformal subarrays and only four of them operates at a time. A flexible phase shifting network is designed for beam steering along the azimuthal direction. To validate the effectiveness of the designs, a prototype was fabricated and measured. Experimental results show the antenna exhibits a gain of around 15 dB and a bandwidth of 74 MHz at the 2.4-GHz band, which has demonstrated the good performance of the balloon conformal array antenna and its huge potential in low-range hilly forest communication applications.