Wei Lin
Wei Lin has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Hao Xu
State Key Laboratory of Structural Analysis for Industrial Equipment, School of Naval Architecture, Dalian University of Technology, Dalian 116024, China
2 shared publications - Jinxiong Duan
Dalian University of Technology, China
2 shared publications - Tiezhi Sun
School of Naval Architecture and Ocean Engineering, Dalian University of Technology 4 , Dalian 116081
2 shared publications
Latest Publications
- Open Access
- 1 February 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (2)
Hydrodynamic characteristics of the underwater continuous launching of vehicles under rolling conditions
Due to the influence of initial conditions such as the tethered velocity, vertically launched underwater vehicles generate large vortex structures in the wake after leaving the launch platform. This leads to an asymmetric surface pressure distribution on the second vehicles passing through the wake, adversely affecting their attitude. The rolling of the launch platform is another critical component of the above initial conditions. This study used the Realizable k−ε model, the volume-of-fluid multiphase flow model, and overlapping grid technology to numerically simulate the launch process of sequentially launched and retrogradely launched vehicles, both with and without rolling conditions. The study conducted a comparative analysis of the evolution patterns of wake vortex intensity, pressure distribution, and air–water phase distribution for the second underwater vehicles under different conditions after their launch. The results show that under rolling conditions, the wake vortex structure exhibits curling at both the vortex head and the vortex tail, with regions of greater vorticity shifting laterally. At certain moments, rolling and vorticity have similar effects on the surface pressure of the second vehicle. The presence of rolling accelerates the expansion and compression of gas pockets within the launch tube, reducing the disturbance of gas on the retrogradely launched first vehicle and changing the rolling angle of the vehicle. In the rolling conditions, the peak water hammer force on the inner wall of the platform increases and the forces acting on the inner wall of the tube show periodic variations.
- 1 February 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (2)
Open AccessHydrodynamic characteristics of the underwater continuous launching of vehicles under rolling conditions
Due to the influence of initial conditions such as the tethered velocity, vertically launched underwater vehicles generate large vortex structures in the wake after leaving the launch platform. This leads to an asymmetric surface pressure distribution on the second vehicles passing through the wake, adversely affecting their attitude. The rolling of the launch platform is another critical component of the above initial conditions. This study used the Realizable k−ε model, the volume-of-fluid multiphase flow model, and overlapping grid technology to numerically simulate the launch process of sequentially launched and retrogradely launched vehicles, both with and without rolling conditions. The study conducted a comparative analysis of the evolution patterns of wake vortex intensity, pressure distribution, and air–water phase distribution for the second underwater vehicles under different conditions after their launch. The results show that under rolling conditions, the wake vortex structure exhibits curling at both the vortex head and the vortex tail, with regions of greater vorticity shifting laterally. At certain moments, rolling and vorticity have similar effects on the surface pressure of the second vehicle. The presence of rolling accelerates the expansion and compression of gas pockets within the launch tube, reducing the disturbance of gas on the retrogradely launched first vehicle and changing the rolling angle of the vehicle. In the rolling conditions, the peak water hammer force on the inner wall of the platform increases and the forces acting on the inner wall of the tube show periodic variations.
- Open Access
- 1 November 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (11)
Cavity evolution of ventilated vehicle launch under a rolling condition
The unsteady development of the tail cavity of a vehicle after it leaves a tube often causes adverse effects, most notably an impact load on the vehicle when the cavity ruptures. The rolling of the launch platform can alter the development of the tail cavity, significantly altering the influence of the impact load on the motion and attitude of the vehicle. The present study employs the shear stress transport k-w model, the volume of fluid multiphase flow model, the Schnerr–Sauer cavity model, and the overlapping mesh technique to conduct numerical simulations of the underwater launching process of a ventilated vehicle under both stationary and rolling boundaries. A comparative analysis is conducted to examine the evolution of the cavity shape, pressure distribution, and collapse-induced load in the tail cavity under various conditions after vehicle launch. The findings suggest that the rolling of the tube induces an asymmetrical development of the shoulder cavity lengths and widths on both the windward and leeward sides, with the result of a lower peak pressure at the cavity closure position compared with that under stationary conditions. The rolling of the tube reduces the internal velocity within the tail cavity, elevates the rupture position of the tail cavity, delays the tail cavity rupture, impacts the timing of the force peak occurrence in the vertical direction of the vehicle, reduces the high pressure at the point of tail cavity rupture, and modifies the post-rupture structural characteristics of the tail cavity.
- 1 November 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (11)
Open AccessCavity evolution of ventilated vehicle launch under a rolling condition
The unsteady development of the tail cavity of a vehicle after it leaves a tube often causes adverse effects, most notably an impact load on the vehicle when the cavity ruptures. The rolling of the launch platform can alter the development of the tail cavity, significantly altering the influence of the impact load on the motion and attitude of the vehicle. The present study employs the shear stress transport k-w model, the volume of fluid multiphase flow model, the Schnerr–Sauer cavity model, and the overlapping mesh technique to conduct numerical simulations of the underwater launching process of a ventilated vehicle under both stationary and rolling boundaries. A comparative analysis is conducted to examine the evolution of the cavity shape, pressure distribution, and collapse-induced load in the tail cavity under various conditions after vehicle launch. The findings suggest that the rolling of the tube induces an asymmetrical development of the shoulder cavity lengths and widths on both the windward and leeward sides, with the result of a lower peak pressure at the cavity closure position compared with that under stationary conditions. The rolling of the tube reduces the internal velocity within the tail cavity, elevates the rupture position of the tail cavity, delays the tail cavity rupture, impacts the timing of the force peak occurrence in the vertical direction of the vehicle, reduces the high pressure at the point of tail cavity rupture, and modifies the post-rupture structural characteristics of the tail cavity.