Yulia S. Kuznetsova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yulia S. Kuznetsova has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Anna A. Kamenskikh
Department of Computational Mathematics, Mechanics and Biomechanics, Perm National Research Polytechnic University, Perm, Russia, Russia
7 shared publications - Yuriy O. Nosov
Department of Computational Mathematics, Mechanics and Biomechanics, Perm National Research Polytechnic University, 614990 Perm, Russia
5 shared publications - Anastasia P. Bogdanova
Department of Computational Mathematics, Mechanics and Biomechanics, Perm National Research Polytechnic University, 614990 Perm, Russia
4 shared publications - Amit Mahajan
Department of Mechanical Engineering, Khalsa College of Engineering and Technology, Amritsar, India
1 shared publication - Anastasia P. Bogdanova
Perm National Research Polytechnic University
1 shared publication - Dmitry O. Pustovalov
Department of Innovative Technologies in Mechanical Engineering, Perm National Research Polytechnic University, Perm, Russia, Russia
1 shared publication
Latest Publications
- Open Access
- 10 November 2026
- Published by MDPI AG in Preprints.org
From Prototyping to High-Tech Industries: Current State and Prospects of Vat Photopolymerization
Vat photopolymerization (VPP) technologies, including stereolithography (SLA), digital light processing (DLP), and liquid crystal display (LCD) printing, have moved beyond rapid prototyping to become a full-fledged platform for the digital manufacturing of functional products over the past decade. The layer-by-layer curing of liquid photosensitive compositions under ultraviolet (UV) or near-UV radiation is the fundamental principle of these methods. This provides high spatial resolution, good surface quality, and broad geometric freedom. This review systematizes and critically analyzes current data on photopolymer 3D printing. The mechanisms of radical and cationic photopolymerization, theoretical models of curing, and rheological behavior are discussed. Typical defects arising during printing and postprocessing are analyzed. Particular attention is paid to the evolution of materials: from traditional acrylate resins to thermosetting engineering composites, elastomers, ceramic and metal suspensions, carbon nanocomposites, biocompatible hydrogels, and recyclable photopolymers with dynamic covalent bonds. Technological innovations, including multi-material printing, grayscale DLP printing, high-speed methods, and the integration of artificial intelligence algorithms, are also considered. Further progress in VPP is shown to depend on the combined optimization of resin composition, rheology, optical properties, exposure parameters, and postprocessing regimes. The key limitations remain the light scattering and absorption in filled systems, volumetric shrinkage and residual stresses, defect formation, insufficient standardization, and the fragmented nature of the available property data. Visible-range photoinitiators, closed-loop recycling, multi-material 4D printing and digital quality management are identified as promising directions.
- 10 November 2026
- Published by MDPI AG in Preprints.org
Open AccessFrom Prototyping to High-Tech Industries: Current State and Prospects of Vat Photopolymerization
Vat photopolymerization (VPP) technologies, including stereolithography (SLA), digital light processing (DLP), and liquid crystal display (LCD) printing, have moved beyond rapid prototyping to become a full-fledged platform for the digital manufacturing of functional products over the past decade. The layer-by-layer curing of liquid photosensitive compositions under ultraviolet (UV) or near-UV radiation is the fundamental principle of these methods. This provides high spatial resolution, good surface quality, and broad geometric freedom. This review systematizes and critically analyzes current data on photopolymer 3D printing. The mechanisms of radical and cationic photopolymerization, theoretical models of curing, and rheological behavior are discussed. Typical defects arising during printing and postprocessing are analyzed. Particular attention is paid to the evolution of materials: from traditional acrylate resins to thermosetting engineering composites, elastomers, ceramic and metal suspensions, carbon nanocomposites, biocompatible hydrogels, and recyclable photopolymers with dynamic covalent bonds. Technological innovations, including multi-material printing, grayscale DLP printing, high-speed methods, and the integration of artificial intelligence algorithms, are also considered. Further progress in VPP is shown to depend on the combined optimization of resin composition, rheology, optical properties, exposure parameters, and postprocessing regimes. The key limitations remain the light scattering and absorption in filled systems, volumetric shrinkage and residual stresses, defect formation, insufficient standardization, and the fragmented nature of the available property data. Visible-range photoinitiators, closed-loop recycling, multi-material 4D printing and digital quality management are identified as promising directions.
- Open Access
- 16 June 2026
- Published by Peoples' Friendship University of Russia in Structural Mechanics of Engineering Constructions and Buildings
- Vol. 22 (1)
Analysis of Viscoelastic Behavior of Antifriction Layer Materials in Bridge Spherical Bearings under Thermomechanical Loading
Thermoplastic polymeric materials have found wide application as protective and antifriction coatings and interlayers of friction units. Spherical bearings include relatively thin sliding layers made of antifriction materials. Polytetrafluoroethylene (PTFE) is widely used as a material for sliding layers. However, at present, there are modern composite and modified materials with improved physical and mechanical properties that can be used as sliding layers. Antifriction materials are often modeled in terms of elasticity theory or elastoplasticity theory. However, it has been established that these materials exhibit viscoelastic properties. A series of experiments to determine the thermomechanical properties of the materials is performed in the current work. PTFE, a metal composite based on PTFE with bronze inclusions (MAK (F4BR40M2)) and structurally modified Arflon AR-200 PTFE were investigated using dynamic mechanical analysis. The temperature change range [-40; +80] °C was considered, it corresponds to the operating temperatures of bridge structures. Temperature dependencies of the storage modulus, loss modulus and loss tangent were obtained. Viscoelastic models of material behavior, such as Maxwell bodies using Prony series and temperature-time analogy, were constructed based on experimental data. Viscoelastic behavior of materials was analyzed in terms of deformation of a bridge spherical bearing under static and periodic loads, taking into account the ambient temperature. The relationships for the effect of temperature on the stress-strain response and contact parameters were obtained. The influence of the thermal expansion coefficient of materials on the structure behavior was considered. It was found that the sliding layer made of MAK allows for a more favorable stress-strain state compared to the structure including a sliding layer made of PTFE: the maximum stress intensity is less by ~ 3%; the maximum strain intensity is less by ~ 20%; displacements along the normal to the sliding layer are less by ~ 17.2%.
- 16 June 2026
- Published by Peoples' Friendship University of Russia in Structural Mechanics of Engineering Constructions and Buildings
- Vol. 22 (1)
Open AccessAnalysis of Viscoelastic Behavior of Antifriction Layer Materials in Bridge Spherical Bearings under Thermomechanical Loading
Thermoplastic polymeric materials have found wide application as protective and antifriction coatings and interlayers of friction units. Spherical bearings include relatively thin sliding layers made of antifriction materials. Polytetrafluoroethylene (PTFE) is widely used as a material for sliding layers. However, at present, there are modern composite and modified materials with improved physical and mechanical properties that can be used as sliding layers. Antifriction materials are often modeled in terms of elasticity theory or elastoplasticity theory. However, it has been established that these materials exhibit viscoelastic properties. A series of experiments to determine the thermomechanical properties of the materials is performed in the current work. PTFE, a metal composite based on PTFE with bronze inclusions (MAK (F4BR40M2)) and structurally modified Arflon AR-200 PTFE were investigated using dynamic mechanical analysis. The temperature change range [-40; +80] °C was considered, it corresponds to the operating temperatures of bridge structures. Temperature dependencies of the storage modulus, loss modulus and loss tangent were obtained. Viscoelastic models of material behavior, such as Maxwell bodies using Prony series and temperature-time analogy, were constructed based on experimental data. Viscoelastic behavior of materials was analyzed in terms of deformation of a bridge spherical bearing under static and periodic loads, taking into account the ambient temperature. The relationships for the effect of temperature on the stress-strain response and contact parameters were obtained. The influence of the thermal expansion coefficient of materials on the structure behavior was considered. It was found that the sliding layer made of MAK allows for a more favorable stress-strain state compared to the structure including a sliding layer made of PTFE: the maximum stress intensity is less by ~ 3%; the maximum strain intensity is less by ~ 20%; displacements along the normal to the sliding layer are less by ~ 17.2%.
- Open Access
Experimental Study and Numerical Modeling of Thermoviscoelastic Behavior of Antifriction Polymeric Materials
Five modifications of polytetrafluoroethylene (PTFE) are considered as a modern alternative to PTFE as sliding layers of bridge bearing parts. Radiation-modified PTFE without additives and with nano-additives as well as composites based on PTFE with bronze inclusions and nanomodified carbon fiber fillers were investigated. Ultra-high-molecular-weight polyethylene (UHMWPE) and classic pure PTFE were considered as control samples. The thermomechanical properties of the materials were studied within the framework of dynamic mechanical analysis in the operating temperature range of bridge structures [−40; +80] °C. The exit zones from the linear theory of viscoelasticity were established for all the materials considered. Temperature dependencies of the storage modulus and the loss modulus were determined. Thermoviscoelastic models of material behavior were constructed using a numerical identification procedure, experimental data, and simulation models. The thermomechanics of materials during the deformation of the spherical support part of the bridge were analyzed. Temperature dependencies of the parameters of the contact stress-strain state were determined with an average coefficient of determination R2 = 0.97 and an average error size RMSE = 0.092.
Open AccessExperimental Study and Numerical Modeling of Thermoviscoelastic Behavior of Antifriction Polymeric Materials
Five modifications of polytetrafluoroethylene (PTFE) are considered as a modern alternative to PTFE as sliding layers of bridge bearing parts. Radiation-modified PTFE without additives and with nano-additives as well as composites based on PTFE with bronze inclusions and nanomodified carbon fiber fillers were investigated. Ultra-high-molecular-weight polyethylene (UHMWPE) and classic pure PTFE were considered as control samples. The thermomechanical properties of the materials were studied within the framework of dynamic mechanical analysis in the operating temperature range of bridge structures [−40; +80] °C. The exit zones from the linear theory of viscoelasticity were established for all the materials considered. Temperature dependencies of the storage modulus and the loss modulus were determined. Thermoviscoelastic models of material behavior were constructed using a numerical identification procedure, experimental data, and simulation models. The thermomechanics of materials during the deformation of the spherical support part of the bridge were analyzed. Temperature dependencies of the parameters of the contact stress-strain state were determined with an average coefficient of determination R2 = 0.97 and an average error size RMSE = 0.092.
- Open Access
- 26 May 2026
- Published by MDPI AG in Preprints.org
Thermo-Viscoelastic Behavior of Antifriction Polymeric Materials
Five modifications of polytetrafluoroethylene (PTFE) are considered as a modern alternative to PTFE as sliding layers of bridge bearing parts. Radiation-modified PTFE without additives and with nano-additives, as well as composites based on PTFE with bronze inclusions and nanomodified carbon fiber fillers, were investigated. Ultra-high-molecular-weight polyethylene (UHMWPE) and classic pure PTFE were considered as control samples. The thermomechanical properties of the materials were studied within the framework of dynamic mechanical analysis in the operating temperature range of bridge structures [−40; +80] °C. The exit zones from the linear theory of viscoelasticity were established for all the materials considered. Temperature dependencies of the storage module and the loss module were determined. Thermo-viscoelastic models of material behavior were constructed using a numerical identification procedure, experimental data, and simulation models. The thermomechanics of materials during the deformation of the spherical support part of the bridge were analyzed. Temperature dependencies of the parameters of the contact stress-strain state were determined with an average coefficient of determination R2 = 0.97 and an average error size RMSE = 0.092.
- 26 May 2026
- Published by MDPI AG in Preprints.org
Open AccessThermo-Viscoelastic Behavior of Antifriction Polymeric Materials
Five modifications of polytetrafluoroethylene (PTFE) are considered as a modern alternative to PTFE as sliding layers of bridge bearing parts. Radiation-modified PTFE without additives and with nano-additives, as well as composites based on PTFE with bronze inclusions and nanomodified carbon fiber fillers, were investigated. Ultra-high-molecular-weight polyethylene (UHMWPE) and classic pure PTFE were considered as control samples. The thermomechanical properties of the materials were studied within the framework of dynamic mechanical analysis in the operating temperature range of bridge structures [−40; +80] °C. The exit zones from the linear theory of viscoelasticity were established for all the materials considered. Temperature dependencies of the storage module and the loss module were determined. Thermo-viscoelastic models of material behavior were constructed using a numerical identification procedure, experimental data, and simulation models. The thermomechanics of materials during the deformation of the spherical support part of the bridge were analyzed. Temperature dependencies of the parameters of the contact stress-strain state were determined with an average coefficient of determination R2 = 0.97 and an average error size RMSE = 0.092.
- Open Access
Influence of the Pattern of Coupling of Elements and Antifriction Interlayer Thickness of a Spherical Bearing on Structural Behavior
In this study, the behavior of the spherical bearing component of the L-100 bridge part (AlfaTech LLC, Perm, Russia) is considered within the framework of a finite element model. The influence of the pattern of the coupling of the antifriction interlayer with the lower steel plate on the operation of the part is examined in terms of ideal contact, full adhesion, and frictional contact. The thickness of the antifriction interlayer varied from 4 to 12 mm. The dependencies of the contact parameters and the stress–strain state on the thickness were determined. Structurally modified polytetrafluoroethylene (PTFE) without AR-200 fillers was considered the material of the antifriction interlayer. The gradual refinement of the behavioral model of the antifriction material to account for structural and relaxation transitions was carried based on a wide range of experimental studies. The elastic–plastic and primary viscoelastic models of material behavior were constructed based on a series of homogeneous deformed-state experiments. The viscoelastic model of material behavior was refined using data from dynamic mechanical analysis over a wide temperature range [−40; +80] °C. In the first approximation, a model of the deformation theory of plasticity with linear elastic volumetric compressibility was identified. As a second approximation, a viscoelasticity model for the Maxwell body was constructed using Prony series. It was established that the viscoelastic model of the material allows for obtaining data on the behavior of the part with an error of no more than 15%. The numerical analog of the construction in an axisymmetric formulation can be used for the predictive analysis of the behavior of the bearing, including when changing the geometric configuration. Recommendations for the numerical modeling of the behavior of antifriction layer materials and the coupling pattern of the bearing elements are given in this work. A spherical bearing with an antifriction interlayer made of Arflon series material is considered for the first time.
Open AccessInfluence of the Pattern of Coupling of Elements and Antifriction Interlayer Thickness of a Spherical Bearing on Structural Behavior
In this study, the behavior of the spherical bearing component of the L-100 bridge part (AlfaTech LLC, Perm, Russia) is considered within the framework of a finite element model. The influence of the pattern of the coupling of the antifriction interlayer with the lower steel plate on the operation of the part is examined in terms of ideal contact, full adhesion, and frictional contact. The thickness of the antifriction interlayer varied from 4 to 12 mm. The dependencies of the contact parameters and the stress–strain state on the thickness were determined. Structurally modified polytetrafluoroethylene (PTFE) without AR-200 fillers was considered the material of the antifriction interlayer. The gradual refinement of the behavioral model of the antifriction material to account for structural and relaxation transitions was carried based on a wide range of experimental studies. The elastic–plastic and primary viscoelastic models of material behavior were constructed based on a series of homogeneous deformed-state experiments. The viscoelastic model of material behavior was refined using data from dynamic mechanical analysis over a wide temperature range [−40; +80] °C. In the first approximation, a model of the deformation theory of plasticity with linear elastic volumetric compressibility was identified. As a second approximation, a viscoelasticity model for the Maxwell body was constructed using Prony series. It was established that the viscoelastic model of the material allows for obtaining data on the behavior of the part with an error of no more than 15%. The numerical analog of the construction in an axisymmetric formulation can be used for the predictive analysis of the behavior of the bearing, including when changing the geometric configuration. Recommendations for the numerical modeling of the behavior of antifriction layer materials and the coupling pattern of the bearing elements are given in this work. A spherical bearing with an antifriction interlayer made of Arflon series material is considered for the first time.
- Open Access
- 2 September 2025
- Published by MDPI AG in Preprints.org
Influence of the Pattern of the Coupling of Elements and the Sliding Layer Thickness of the Spherical Bearing on the Structural Behavior
In the study, the behavior of the spherical bearing component of the L-100 bridge part (AlfaTech LLC, Perm, Russia) is considered within the framework of a finite element model. The influence of the pattern of the coupling of the antifriction layer with the lower steel plate on the operation of the part is examined: ideal contact, full adhesion, frictional contact. The thickness of the antifriction layer varied from 4 to 12 mm. The dependencies of the contact parameters and the stress-strain state on the thickness were determined. Structurally modified polytetrafluoroethylene (PTFE) without AR-200 fillers was considered as the material of the sliding layer. The gradual refinement of the behavior model of the antifriction material to account for structural and relaxation transitions was carried out on the basis of a wide range of experimental studies. In the first approximation, a model of the deformation theory of plasticity with linear elastic volumetric compressibility was identified. As a second approximation, a viscoelasticity model for the Maxwell body was constructed using Prony series. It was established that the viscoelastic model of the material allows for obtaining data on the behavior of the part with an error of no more than 15%. The numerical analog of the construction in an axisymmetric formulation can be used for predictive analysis of the behavior of the bearing, including when changing the geometric configuration.
- 2 September 2025
- Published by MDPI AG in Preprints.org
Open AccessInfluence of the Pattern of the Coupling of Elements and the Sliding Layer Thickness of the Spherical Bearing on the Structural Behavior
In the study, the behavior of the spherical bearing component of the L-100 bridge part (AlfaTech LLC, Perm, Russia) is considered within the framework of a finite element model. The influence of the pattern of the coupling of the antifriction layer with the lower steel plate on the operation of the part is examined: ideal contact, full adhesion, frictional contact. The thickness of the antifriction layer varied from 4 to 12 mm. The dependencies of the contact parameters and the stress-strain state on the thickness were determined. Structurally modified polytetrafluoroethylene (PTFE) without AR-200 fillers was considered as the material of the sliding layer. The gradual refinement of the behavior model of the antifriction material to account for structural and relaxation transitions was carried out on the basis of a wide range of experimental studies. In the first approximation, a model of the deformation theory of plasticity with linear elastic volumetric compressibility was identified. As a second approximation, a viscoelasticity model for the Maxwell body was constructed using Prony series. It was established that the viscoelastic model of the material allows for obtaining data on the behavior of the part with an error of no more than 15%. The numerical analog of the construction in an axisymmetric formulation can be used for predictive analysis of the behavior of the bearing, including when changing the geometric configuration.
- Open Access
- 20 November 2023
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 7 (6) , 204
Recent Trends and Developments in the Electrical Discharge Machining Industry: A Review
Electrical discharge machining (EDM) is a highly precise technology that not only facilitates the machining of components into desired shapes but also enables the alteration of the physical and chemical properties of workpieces. The complexity of the process is due to a number of regulating factors such as the material of the workpiece and tools, dielectric medium, and other process parameters. Based on the material type, electrode shape, and process configuration, various shapes and degrees of accuracy can be generated. The study of erosion is based on research into processing techniques, which are the primary tools for using EDM. Empirical knowledge with subsequent optimization of technological parameters is one of the ways to obtain the required surface quality of the workpiece with defect minimization, as well as mathematical and numerical modeling of the EDM process. This article critically examines all key aspects of EDM, reflecting both the early foundations of electrical erosion and the current state of the industry, noting the current trends towards the transition of EDM to the 5.0 industry zone in terms of safety and minimizing the impact of the process on the environment.
- 20 November 2023
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 7 (6) , 204
Open AccessRecent Trends and Developments in the Electrical Discharge Machining Industry: A Review
Electrical discharge machining (EDM) is a highly precise technology that not only facilitates the machining of components into desired shapes but also enables the alteration of the physical and chemical properties of workpieces. The complexity of the process is due to a number of regulating factors such as the material of the workpiece and tools, dielectric medium, and other process parameters. Based on the material type, electrode shape, and process configuration, various shapes and degrees of accuracy can be generated. The study of erosion is based on research into processing techniques, which are the primary tools for using EDM. Empirical knowledge with subsequent optimization of technological parameters is one of the ways to obtain the required surface quality of the workpiece with defect minimization, as well as mathematical and numerical modeling of the EDM process. This article critically examines all key aspects of EDM, reflecting both the early foundations of electrical erosion and the current state of the industry, noting the current trends towards the transition of EDM to the 5.0 industry zone in terms of safety and minimizing the impact of the process on the environment.
- Open Access
- 1 February 2017
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 177 (1) , 012125
Application of the geometric immersion method based on the Castigliano variational principle for the axisymmetric problems of elasticity theory
The fundamentals of the geometric immersion stress method for axisymmetric problems of elasticity theory have been stated. The geometric immersion method involves reduction of the initial problem for Clapeyron's free form elastic body to an iteration sequence of elasticity theory problems on some canonical domain. The iteration procedure for the variational equation of the geometric immersion method has been stated, as well as its discrete analog construction technique suggested with the finite-element stress method for the axisymmetric problem of the elasticity theory in the cylindrical coordinates. A practical application of the method has been demonstrated by a test problem. A reasonably good fit between the stress fields definition and the numerical solution by the traditional finite-element displacement method has been obtained.
- 1 February 2017
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 177 (1) , 012125
Open AccessApplication of the geometric immersion method based on the Castigliano variational principle for the axisymmetric problems of elasticity theory
The fundamentals of the geometric immersion stress method for axisymmetric problems of elasticity theory have been stated. The geometric immersion method involves reduction of the initial problem for Clapeyron's free form elastic body to an iteration sequence of elasticity theory problems on some canonical domain. The iteration procedure for the variational equation of the geometric immersion method has been stated, as well as its discrete analog construction technique suggested with the finite-element stress method for the axisymmetric problem of the elasticity theory in the cylindrical coordinates. A practical application of the method has been demonstrated by a test problem. A reasonably good fit between the stress fields definition and the numerical solution by the traditional finite-element displacement method has been obtained.