CVChanikya Valeti

Chanikya Valeti

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chanikya Valeti has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Predicting the onset of middle cerebral artery aneurysms: Influence of bifurcation angle

    by Chanikya Valeti, B. S. Niroop, G. B. Akhilesh Gowda, Jayadevan Enakshy Rajan, Prakash Nair, B. J. Sudhir, B. S. V. Patnaik

    Aneurysms are abnormal bulges in arteries caused by vessel wall weakening. The rupture risk associated with an aneurysm can result in life-threatening complications, such as subarachnoid hemorrhage. The rupture of smaller bifurcation aneurysms is difficult to predict, as well as risky to operate on, as the bifurcation angle plays a dominant role. Patient management and treatment modalities for smaller aneurysms require an understanding of their growth propensity due to hemodynamic forces and their interaction with the vessel wall. The main objective of the present study is to analyze the factors resulting in the onset of an aneurysm and hemodynamic interactions facilitating its formative growth, in particular in the middle cerebral artery. To start with, the original anatomical state of the healthy bifurcation blood vessel is retrospectively constructed to facilitate computational fluid dynamics simulations. Numerical simulations are performed on a larger cohort of 42 patient-specific aneurysms, and four representative small aneurysms are exemplified in this study. Hemodynamic parameters, such as wall shear stress, time-averaged wall shear stress, wall shear stress gradient, wall shear stress divergence, relative residence time, aneurysm formation index, pressure distribution, and energy loss, are analyzed between aneurysmal and pre-aneurysmal healthy stages. In particular, the effect of asymmetry on aneurysm formation was investigated. Aneurysm formation has altered the hemodynamic conditions, indicating low wall shear stress, higher residence time, and recirculating flow conditions. Both pressure and wall shear stress divergence decreased after aneurysm formation. Greater hemodynamic stresses are observed in the daughter vessels with larger bifurcation angles. Aneurysms with larger bifurcation angle was observed to have greater energy losses compared to smaller bifurcation angles.

  • Influence of wall thickness on the rupture risk of a patient-specific cerebral aneurysm: A fluid–structure interaction study

    by Chanikya Valeti, Srinivas Bolem, Azhaganmaadevi K. Alagan, B. J. Sudhir, Santhosh K. Kannath, Bhushan Akhade, Gowtham Matham, K Krishnakumar, B. S. V. Patnaik

    Cerebral aneurysms are the bulges in arteries that have the potential to rupture, as thin-walled regions of an aneurysm are more vulnerable. Understanding the correlation between the wall thickness and the corresponding wall stresses can facilitate better prediction using fluid–structure interaction tools. However, obtaining the actual in vivo wall thickness variation of the aneurysm dome and neck is vital for an accurate prediction of wall stresses. Invasive methods of obtaining wall thickness variation of an abnormal artery may further aggravate the rupture risk of these aneurysms. Modeling aneurysmal wall thickness reconstruction, closer to the in vivo conditions from the histopathological slices, is an apt approach to follow. To this end, the present study performs a comparative assessment of uniform, variable, and patient-specific wall thickness on the hemodynamic and biomechanical wall stresses. Simulations show that maximum wall stresses for the uniform, variable, and patient-specific wall thickness are 13.6, 27.6, and 48.4 kPa, respectively. The maximum wall displacements for the uniform, variable, and patient-specific wall thickness were observed to be 58.5, 126, and 162 μm, respectively. It is observed that the uniform wall thickness model is conservative and underestimates the risk in the prediction of biomechanical stresses and wall displacements. Thinner wall regions experience higher stress for the same internal pressure than thicker wall regions, indicating regions that are more susceptible to rupture. The generation of a variable wall thickness model was observed to be an apt approach, as patient-specific wall thickness information can only be retrospective in the current scientific scenario.


  • Patient-specific arterial wall generation for intracranial aneurysms with a variable and a near realistic vessel wall thickness for FSI studies

    by Srinivas Bolem, Chanikya Valeti, Nimmy Thankom Philip, B.J. Sudhir, B.S.V. Patnaik

    Imaging methodologies such as, computed tomography (CT) aid in three-dimensional (3D) reconstruction of patient-specific aneurysms. The radiological data is useful in understanding their location, shape, size, and disease progression. However, there are serious impediments in discerning the blood vessel wall thickness due to limitations in the current imaging modalities. This further restricts the ability to perform high-fidelity fluid structure interaction (FSI) studies for an accurate assessment of rupture risk. FSI studies would require the arterial wall mesh to be generated to determine realistic maximum allowable wall stresses by performing coupled calculations for the hemodynamic forces with the arterial walls. In the present study, a novel methodology is developed to geometrically model variable vessel wall thickness for the lumen isosurface extracted from CT scan slices of patient-specific aneurysms based on clinical and histopathological inputs. FSI simulations are carried out with the reconstructed models to assess the importance of near realistic wall thickness model on rupture risk predictions. During surgery, clinicians often observe translucent vessel walls, indicating the presence of thin regions. The need to generate variable vessel wall thickness model, that embodies the wall thickness gradation, is closer to such clinical observations. Hence, corresponding FSI simulations performed can improve clinical outcomes. Considerable differences in the magnitude of instantaneous wall shear stresses and von Mises stresses in the walls of the aneurysm was observed between a uniform wall thickness and a variable wall thickness model. In the present study, a variable vessel wall thickness generation algorithm is implemented. It was shown that, a realistic wall thickness modeling is necessary for an accurate prediction of the shear stresses on the wall as well as von Mises stresses in the wall. FSI simulations are performed to demonstrate the utility of variable wall thickness modeling.


  • Numerical investigation of unruptured middle cerebral artery bifurcation aneurysms: influence of aspect ratio

    by Chanikya Valeti, Saravanan Gurusamy, K. Krishnakumar, Hariharan Venkat Easwer, Santhosh K. Kannath, B. J. Sudhir, B. S. V. Patnaik

    An aneurysm is a disease condition, which is due to the pathological weakening of an arterial wall. These aneurysms are often found in various branch points and bifurcations of an artery in the cerebral circulation. Most aneurysms come to medical attention, either due to brain hemorrhages caused by rupture or found unruptured. To consider surgically invasive treatment modalities, clinicians need scientific methods such as, hemodynamic analysis to assess rupture risk. The arterial wall loses its structural integrity when wall shear stress (WSS) and other hemodynamic parameters exceed a certain threshold. In the present study, numerical simulations are carried out for unruptured middle cerebral artery (MCA) aneurysms. Three distinct representative sizes are chosen from a larger patient pool of 26 MCA aneurysms. Logically, these aneurysms represent three growth stages of any patient with similar anatomical structure. Simulations are performed to compare the three growth phases (with different aspect ratios) of an aneurysm and correlate their hemodynamic parameters. Simulations with patient specific boundary conditions reveal that, aneurysms with a higher aspect ratio (AR) correspond to an attendant decrease in both time-averaged wall shear stress (TAWSS) and spatial wall shear stress gradients (WSSG). Smaller MCAs were observed to have higher positive wall shear stress divergence (WSSD), exemplifying the tensile nature of arterial wall stretching. Present study identifies positive wall shear stress divergence (PWSSD) to be a potential biomarker for evaluating the growth of an aneurysm.