Stefano Vigna
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Stefano Vigna has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Daniele Peila
Department of Environment, Land and Infrastructure Engineering, Politecnico di Torino, Torino, Italy
2 shared publications - Jacopo Seccatore
Universidad Católica del Norte, Chile
2 shared publications - Maddalena Marchelli
Department of Environment
2 shared publications - Marilena Cardu
Department of Environment, Land and Infrastructure Engineering, Politecnico di Torino, Torino, Italy
2 shared publications - Tatiane Marin
Universidad Técnica Federico Santa María, Chile
2 shared publications - Valerio De Biagi
Politecnico di Torino, Italy
2 shared publications
Latest Publications
- Open Access
- 12 August 2025
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 58 (12) , 13867-13893
A Method to Compute the Ultimate Displacements in Reinforced Earth Rockfall Protection Embankments: A Perspective for the Design
Rockfall protective embankments (RPEs) offer a cost-effective solution for mitigating rockfall hazards, particularly in scenarios involving high-energy or repeated impacts. Among the available technologies, reinforced earth embankments are widely adopted, although their design methodologies remain a subject of ongoing research. This study investigates the behavior of a reinforced earth RPE, with a focus on characterizing the evolution of the displacement field up to collapse induced by a localized punching force, representing the impact of a falling block, applied to one face of the structure. Two reinforcement configurations are examined: unidirectional geogrid and double-twist steel mesh with metallic clips. Given the scarcity of full-scale experimental data and the practical challenges associated with such tests, a series of reduced-scale tests was designed and conducted. Geometric and mechanical similitude was ensured through the application of the Buckingham $$\Pi$$ -theorem. The tests were performed under quasi-static conditions to isolate the displacement field associated with soil layer sliding, neglecting inertial effects. Throughout the tests, both force and displacement histories were continuously recorded and analyzed. The results provide valuable insights into the volume of embankment affected by impact and the pre-collapse displacement patterns for both reinforcement types. Two extended finite element method (XFEM) models were developed to simulate the behavior of each reinforcement configuration. Model calibration was enhanced using photogrammetric reconstruction of the embankment’s downslope face, with point cloud data collected throughout the testing phase, enabling accurate validation of simulated deformation patterns. Finally, a full-scale dynamic impact test from the literature was used to calibrate a real-scale numerical model and to assess the consistency between dynamic and quasi-static responses of the same embankment system.- 12 August 2025
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 58 (12) , 13867-13893
Open AccessA Method to Compute the Ultimate Displacements in Reinforced Earth Rockfall Protection Embankments: A Perspective for the Design
Rockfall protective embankments (RPEs) offer a cost-effective solution for mitigating rockfall hazards, particularly in scenarios involving high-energy or repeated impacts. Among the available technologies, reinforced earth embankments are widely adopted, although their design methodologies remain a subject of ongoing research. This study investigates the behavior of a reinforced earth RPE, with a focus on characterizing the evolution of the displacement field up to collapse induced by a localized punching force, representing the impact of a falling block, applied to one face of the structure. Two reinforcement configurations are examined: unidirectional geogrid and double-twist steel mesh with metallic clips. Given the scarcity of full-scale experimental data and the practical challenges associated with such tests, a series of reduced-scale tests was designed and conducted. Geometric and mechanical similitude was ensured through the application of the Buckingham $$\Pi$$ -theorem. The tests were performed under quasi-static conditions to isolate the displacement field associated with soil layer sliding, neglecting inertial effects. Throughout the tests, both force and displacement histories were continuously recorded and analyzed. The results provide valuable insights into the volume of embankment affected by impact and the pre-collapse displacement patterns for both reinforcement types. Two extended finite element method (XFEM) models were developed to simulate the behavior of each reinforcement configuration. Model calibration was enhanced using photogrammetric reconstruction of the embankment’s downslope face, with point cloud data collected throughout the testing phase, enabling accurate validation of simulated deformation patterns. Finally, a full-scale dynamic impact test from the literature was used to calibrate a real-scale numerical model and to assess the consistency between dynamic and quasi-static responses of the same embankment system. - Open Access
- 28 May 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (11) , 4657
The Role of Delays in the Performance of Blasting
When researching rock blasting, the design parameters typically used for analysis are the geometric and charging parameters. This study focuses on a different approach based on the effect of timing, specifically the role of delays in the initiation sequence. Data were obtained from the results of full-scale blasts. The experimental setting and location allowed us to consider all parameters, other than the number of delays, as constants. The experimental results were analyzed, relating the delay variables to the fragmentation and KPIs of downstream operations. It was found that increasing the number of delays per unit of blasted rock and reducing simultaneous adjacent holes produces finer fragmentation, reduces the amount of fines, facilitates secondary operations, and reduces the risk of flyrock.
- 28 May 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (11) , 4657
Open AccessThe Role of Delays in the Performance of Blasting
When researching rock blasting, the design parameters typically used for analysis are the geometric and charging parameters. This study focuses on a different approach based on the effect of timing, specifically the role of delays in the initiation sequence. Data were obtained from the results of full-scale blasts. The experimental setting and location allowed us to consider all parameters, other than the number of delays, as constants. The experimental results were analyzed, relating the delay variables to the fragmentation and KPIs of downstream operations. It was found that increasing the number of delays per unit of blasted rock and reducing simultaneous adjacent holes produces finer fragmentation, reduces the amount of fines, facilitates secondary operations, and reduces the risk of flyrock.
- Open Access
- 9 May 2024
- Published by MDPI AG in Preprints.org
The Role of Delays in the Performance of Blasting
When researching rock blasting, the design parameters used for the analysis are usually the ge-ometric and charging ones. This study is based on a different approach, and focuses on the effect of timing, in specific the role of delays in the initiation sequence. The data come from the results of full-scale blasts. The experimental setting and location allowed to consider all parameter other than the number of delays as a constant. The experimental results are analyzed relating the delay var-iables to fragmentation and KPIs of downstream operations. It is shown how increasing the number of delays per unit of blasted rock and reducing simultaneous adjacent holes produces finer fragmentation, reduces the amount of fines, facilitates the secondary operations and reduces the risk of flyrock.
- 9 May 2024
- Published by MDPI AG in Preprints.org
Open AccessThe Role of Delays in the Performance of Blasting
When researching rock blasting, the design parameters used for the analysis are usually the ge-ometric and charging ones. This study is based on a different approach, and focuses on the effect of timing, in specific the role of delays in the initiation sequence. The data come from the results of full-scale blasts. The experimental setting and location allowed to consider all parameter other than the number of delays as a constant. The experimental results are analyzed relating the delay var-iables to fragmentation and KPIs of downstream operations. It is shown how increasing the number of delays per unit of blasted rock and reducing simultaneous adjacent holes produces finer fragmentation, reduces the amount of fines, facilitates the secondary operations and reduces the risk of flyrock.
- Open Access
- 28 November 2023
- Published by MDPI AG in Geosciences
- Vol. 13 (12) , 368
Numerical Simulation of Rockfall Protection Embankments in Natural Soil
Rockfall events represent a significant hazard in mountainous regions, putting human safety and critical infrastructure at risk. Various mitigation devices are available, among which, Rockfall protection embankments (RPEs) located in natural soil are passive defense work suitable for high-energy and high-frequency events. Currently, limited research has been conducted in this area, with the Austrian standard ONR 24810 providing the sole codified design method. A parametrical analysis involving both the RPE geometry and the impact features was developed by Abaqus/Explicit FEM code, with 2270 cases overall. The research aims to identify conditions under which RPEs effectively stop falling blocks, focusing on two failure mechanisms: the block pass over the RPE after impacting the upstream side bank and the RPE structural collapse. Additionally, the interaction between RPEs and their foundations during the impact is explored. The results provide valuable insights into the dynamic behavior of these structures. In terms of design considerations, this study offers analytical equations to quantify crater depth and foundation stress induced by the impact. Furthermore, design charts are developed to assess the block passing over verification and the structural collapse verification.
- 28 November 2023
- Published by MDPI AG in Geosciences
- Vol. 13 (12) , 368
Open AccessNumerical Simulation of Rockfall Protection Embankments in Natural Soil
Rockfall events represent a significant hazard in mountainous regions, putting human safety and critical infrastructure at risk. Various mitigation devices are available, among which, Rockfall protection embankments (RPEs) located in natural soil are passive defense work suitable for high-energy and high-frequency events. Currently, limited research has been conducted in this area, with the Austrian standard ONR 24810 providing the sole codified design method. A parametrical analysis involving both the RPE geometry and the impact features was developed by Abaqus/Explicit FEM code, with 2270 cases overall. The research aims to identify conditions under which RPEs effectively stop falling blocks, focusing on two failure mechanisms: the block pass over the RPE after impacting the upstream side bank and the RPE structural collapse. Additionally, the interaction between RPEs and their foundations during the impact is explored. The results provide valuable insights into the dynamic behavior of these structures. In terms of design considerations, this study offers analytical equations to quantify crater depth and foundation stress induced by the impact. Furthermore, design charts are developed to assess the block passing over verification and the structural collapse verification.