Miguel García-Rollán
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Miguel García-Rollán has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Ramiro Ruiz-Rosas
Departamento de Ingeniería Química, Andalucía Tech, University of Malaga, Campus de Teatinos s/n, 29010 Malaga, Spain
4 shared publications - Javier Torres-Liñán
Departamento de Ingenierí́a Química, Universidad de Málaga, Andalucia Tech, Campus de Teatinos s/n, 29010 Málaga, Spain
3 shared publications - José Palomo
Catalysis Engineering, Department of Chemical Engineering, Delft University of Technology, Van der Maasweg 9, 2629 HZ Delft, The Netherlands
2 shared publications - José Rodríguez-Mirasol
Departamento de Ingenierí́a Química, Universidad de Málaga, Andalucia Tech, Campus de Teatinos s/n, 29010 Málaga, Spain
2 shared publications - Juana Maria Rosas
Departamento de Ingenierí́a Química, Universidad de Málaga, Andalucia Tech, Campus de Teatinos s/n, 29010 Málaga, Spain
2 shared publications - Miguel Ángel Rodríguez-Cano
University of Castilla-La Mancha Avda. Camilo José Cela 12
2 shared publications
Latest Publications
- Open Access
Turning Waste into Solutions: Activated Carbons from Shrimp Shell for Nicotine Adsorption in Aqueous Phase
In this study, removal of nicotine, highly toxic and persistent environmental contaminant, was successfully conducted using activated carbons prepared via chemical activation with KOH from shrimp shell, a byproduct of the food industry. The activation process yielded activated carbons with an exceptionally developed porous texture, exhibiting, in the best case, a surface area of nearly 2000 m2/g and a surface enriched with diverse oxygenated functional groups, as confirmed by XPS and FTIR analyses. Nicotine adsorption studies demonstrated that the adsorption process was more favorable at near-neutral pH values (pH = 8) and higher temperatures. Kinetic and thermodynamic analyses, combined with material characterization, revealed that the adsorption process is governed by both physical and chemical interactions between the adsorbate and the adsorbent, being overall spontaneous and endothermic. The Sips isotherm model closely fits the adsorption data, highlighting the heterogeneity of the activated carbon surface. Under these conditions, adsorption was studied at three different temperatures, with the highest temperature (45 °C) exhibiting the most significant adsorption capacity, slightly below 500 mg/g. In addition, column adsorption tests demonstrated the high efficiency of activated carbons in nicotine removal, making shrimp head shells a promising carbon precursor for use as a raw material in preparing activated carbons for use as nicotine adsorbents for industry.
Open AccessTurning Waste into Solutions: Activated Carbons from Shrimp Shell for Nicotine Adsorption in Aqueous Phase
In this study, removal of nicotine, highly toxic and persistent environmental contaminant, was successfully conducted using activated carbons prepared via chemical activation with KOH from shrimp shell, a byproduct of the food industry. The activation process yielded activated carbons with an exceptionally developed porous texture, exhibiting, in the best case, a surface area of nearly 2000 m2/g and a surface enriched with diverse oxygenated functional groups, as confirmed by XPS and FTIR analyses. Nicotine adsorption studies demonstrated that the adsorption process was more favorable at near-neutral pH values (pH = 8) and higher temperatures. Kinetic and thermodynamic analyses, combined with material characterization, revealed that the adsorption process is governed by both physical and chemical interactions between the adsorbate and the adsorbent, being overall spontaneous and endothermic. The Sips isotherm model closely fits the adsorption data, highlighting the heterogeneity of the activated carbon surface. Under these conditions, adsorption was studied at three different temperatures, with the highest temperature (45 °C) exhibiting the most significant adsorption capacity, slightly below 500 mg/g. In addition, column adsorption tests demonstrated the high efficiency of activated carbons in nicotine removal, making shrimp head shells a promising carbon precursor for use as a raw material in preparing activated carbons for use as nicotine adsorbents for industry.
- Open Access
Self-Standing Carbon Fiber Electrodes Doped with Pd Nanoparticles as Electrocatalysts in Zinc–Air Batteries
In this work, the effect of the palladium precursor on the Oxygen Reduction Reaction (ORR) performance of lignin-based electrospun carbon fibers was studied. The fibers were spun from a lignin-ethanol solution free of any binder, where different Pd salts were added at two concentration levels. The system implemented to perform the spinning was a coaxial setup in which the internal flow contains the precursor dispersion with the metallic precursor, and ethanol was used as external flow to help fiber formation and prevent drying before generating the Taylor cone. The obtained cloths were thermostabilized in air at 200 °C and carbonized in nitrogen at 900 °C. The resulting carbon fibers were characterized by physicochemical and electrochemical techniques. The palladium precursor significantly affects nanoparticle distribution and size, fiber diameter, pore distribution, surface area and electrochemical behavior. The fibers prepared with palladium acetylacetonate at high Pd loading and carbonized at 900 °C under a CO2 atmosphere showed high mechanical stability and the best ORR activity, showing near total selectivity towards the 4-electron path. These features are comparable to those of the commercial Pt/C catalyst but much lower metal loading (10.6 wt.% vs. 20 wt.%). The most promising fibers have been evaluated as cathodes in a zinc–air battery, delivering astonishing stability results that surpassed the performance of commercial Pt/C materials in both charging and discharging processes.
Open AccessSelf-Standing Carbon Fiber Electrodes Doped with Pd Nanoparticles as Electrocatalysts in Zinc–Air Batteries
In this work, the effect of the palladium precursor on the Oxygen Reduction Reaction (ORR) performance of lignin-based electrospun carbon fibers was studied. The fibers were spun from a lignin-ethanol solution free of any binder, where different Pd salts were added at two concentration levels. The system implemented to perform the spinning was a coaxial setup in which the internal flow contains the precursor dispersion with the metallic precursor, and ethanol was used as external flow to help fiber formation and prevent drying before generating the Taylor cone. The obtained cloths were thermostabilized in air at 200 °C and carbonized in nitrogen at 900 °C. The resulting carbon fibers were characterized by physicochemical and electrochemical techniques. The palladium precursor significantly affects nanoparticle distribution and size, fiber diameter, pore distribution, surface area and electrochemical behavior. The fibers prepared with palladium acetylacetonate at high Pd loading and carbonized at 900 °C under a CO2 atmosphere showed high mechanical stability and the best ORR activity, showing near total selectivity towards the 4-electron path. These features are comparable to those of the commercial Pt/C catalyst but much lower metal loading (10.6 wt.% vs. 20 wt.%). The most promising fibers have been evaluated as cathodes in a zinc–air battery, delivering astonishing stability results that surpassed the performance of commercial Pt/C materials in both charging and discharging processes.
- Open Access
Carbon-Based Catalysts from H3PO4 Activation of Olive Stones for Sustainable Solketal and γ-Valerolactone Production
The use of activated carbon-based catalysts for the production of solketal and γ-valerolactone (GVL), two products of interest for biorefinery processes, was investigated. Activated carbons (ACs) were prepared by chemical activation of olive stones, an agricultural byproduct, using H3PO4 to olive stone mass impregnation ratios (IRs) of 1:1 and 3:1, and under nitrogen or air atmosphere. The ACs showed SBET values of 1130–1515 m2/g, owing to the presence of micropores (0.45–0.60 cm3/g). The use of an IR of 3:1 delivered a wider pore size distribution, with mesopore volume increasing up to 1.36 cm3/g. XPS confirmed the presence of phosphorus groups with surface concentrations of 2.2–3.2 wt% strongly bonded the AC surface through C-O-P bonds. The ACs were tested as acid catalysts for the acetalization of glycerol in a stirred batch reactor at temperatures of 30–50 °C, glycerol concentrations of 1.5 to 3.4 mol/L, and 1–3 wt% catalytic loading. The catalytic activity was clearly correlated with the quantity of C-O-P acid groups determined by TPD, which increased when ACs were prepared under air atmosphere. The AC prepared with IR 3:1 under air achieved full selectivity to solketal, with activation energy of 49 kJ/mol and conversion of up to 70%, matching the equilibrium conversion value under the optimum reaction conditions. A bifunctional catalyst was prepared over this AC by deposition of 5 wt% zirconium and tested in stirred batch reactor for the hydrogenation of levulinic acid (LA) using isopropyl alcohol (IPA) as solvent and H2 donor, with LA:IPA ratios from 1:1 to 1:7 and temperatures between 160–200 °C. The catalyst reached full LA conversion and a GVL yield higher than 80% after only 12 h at 200 °C. A test conducted in the presence of water revealed that it was an inhibitor of the reaction. The identification of isopropyl levulinate as an intermediate suggests that the most likely reaction pathway was dehydration, followed by hydrogenation and cyclization, to obtain GVL. Kinetic modelling of the results showed a value of 42 kJ/mol for the hydrogenation step. The reusability of the catalyst was tested for five consecutive reaction cycles, maintaining most of the activity and selectivity towards GVL.
Open AccessCarbon-Based Catalysts from H3PO4 Activation of Olive Stones for Sustainable Solketal and γ-Valerolactone Production
The use of activated carbon-based catalysts for the production of solketal and γ-valerolactone (GVL), two products of interest for biorefinery processes, was investigated. Activated carbons (ACs) were prepared by chemical activation of olive stones, an agricultural byproduct, using H3PO4 to olive stone mass impregnation ratios (IRs) of 1:1 and 3:1, and under nitrogen or air atmosphere. The ACs showed SBET values of 1130–1515 m2/g, owing to the presence of micropores (0.45–0.60 cm3/g). The use of an IR of 3:1 delivered a wider pore size distribution, with mesopore volume increasing up to 1.36 cm3/g. XPS confirmed the presence of phosphorus groups with surface concentrations of 2.2–3.2 wt% strongly bonded the AC surface through C-O-P bonds. The ACs were tested as acid catalysts for the acetalization of glycerol in a stirred batch reactor at temperatures of 30–50 °C, glycerol concentrations of 1.5 to 3.4 mol/L, and 1–3 wt% catalytic loading. The catalytic activity was clearly correlated with the quantity of C-O-P acid groups determined by TPD, which increased when ACs were prepared under air atmosphere. The AC prepared with IR 3:1 under air achieved full selectivity to solketal, with activation energy of 49 kJ/mol and conversion of up to 70%, matching the equilibrium conversion value under the optimum reaction conditions. A bifunctional catalyst was prepared over this AC by deposition of 5 wt% zirconium and tested in stirred batch reactor for the hydrogenation of levulinic acid (LA) using isopropyl alcohol (IPA) as solvent and H2 donor, with LA:IPA ratios from 1:1 to 1:7 and temperatures between 160–200 °C. The catalyst reached full LA conversion and a GVL yield higher than 80% after only 12 h at 200 °C. A test conducted in the presence of water revealed that it was an inhibitor of the reaction. The identification of isopropyl levulinate as an intermediate suggests that the most likely reaction pathway was dehydration, followed by hydrogenation and cyclization, to obtain GVL. Kinetic modelling of the results showed a value of 42 kJ/mol for the hydrogenation step. The reusability of the catalyst was tested for five consecutive reaction cycles, maintaining most of the activity and selectivity towards GVL.
- 1 November 2023
- Published by IATED Academy in ICERI Proceedings
- Vol. 1, 3223-3227
SOCIAL INTEGRATION THROUGH COOPERATIVE AND COLLABORATIVE LEARNING: A PROPOSAL FOR SECONDARY EDUCATION USING MINECRAFT
- 1 November 2023
- Published by IATED Academy in ICERI Proceedings
- Vol. 1, 3223-3227
SOCIAL INTEGRATION THROUGH COOPERATIVE AND COLLABORATIVE LEARNING: A PROPOSAL FOR SECONDARY EDUCATION USING MINECRAFT
- 1 November 2023
- Published by IATED Academy in ICERI Proceedings
- Vol. 1, 3231-3239
DEVELOPMENT OF INTERACTIVE APPS FOR PROBLEM BASED LEARNING FOR LAST YEAR COURSES OF THE DEGREE OF CHEMICAL ENGINEERING
- 1 November 2023
- Published by IATED Academy in ICERI Proceedings
- Vol. 1, 3231-3239
DEVELOPMENT OF INTERACTIVE APPS FOR PROBLEM BASED LEARNING FOR LAST YEAR COURSES OF THE DEGREE OF CHEMICAL ENGINEERING