Yuxuan Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yuxuan Zhang has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Jianxin Wu
College of Mechanical Engineering, Inner Mongolia University of Technology, Hohhot 010051, China
6 shared publications - Lei Zhang
Sun Yat-sen University
6 shared publications - Jingwen Dong
National key Laboratory of Microwave Imaging, Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing, China
2 shared publications - Wangzhe Li
National key Laboratory of Microwave Imaging, Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing, China
2 shared publications Mengya Li
Beijing Research Institute of Telemetry, Beijing, China
1 shared publication- Yuyuan Fang
Southwest Jiaotong University
1 shared publication
Latest Publications
- 5 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 62 (00189251) , 4205-4220
3-D Imaging in MIMO-ISAR Using Sparse Bayesian Learning With Space-Time Adaptive Dimensionality Reduction
Multiple-input-multiple-output inverse synthetic aperture radar (MIMO-ISAR) is widely used in three-dimensional (3D) imaging due to its excellent angular resolution. After range compression, by applying super-resolution algorithms, i.e., sparse Bayesian learning (SBL), on the Doppler dimension and the height dimension sequentially, the 3D point cloud of the target is obtained. However, this cascaded processing approach leads to error accumulation and may even impair the interference phases between antennas. In contrast, joint multi-channel processing can achieve better performance but incurs heavy computational costs. Hence, the SBL method with space-time adaptive dimensionality reduction (STADR SBL) is proposed for 3D imaging efficiently. Firstly, the space-time domain dictionary is constructed for joint sparse recovery in the angular (height) and Doppler frequency dimensions. Then, edge detection is performed on the angle- Doppler spectrum, and the frequency search range of the dictionary is reduced to within the edge boundaries. Finally, the dimensionality-reduced dictionary is further split into a spatial and a temporal dictionary utilizing the Kronecker product property, and super-resolution 3D imaging is achieved efficiently by the fast SBL method. Experiments with both measured real data and simulated data verify the algorithm's effectiveness.
- 5 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 62 (00189251) , 4205-4220
3-D Imaging in MIMO-ISAR Using Sparse Bayesian Learning With Space-Time Adaptive Dimensionality Reduction
Multiple-input-multiple-output inverse synthetic aperture radar (MIMO-ISAR) is widely used in three-dimensional (3D) imaging due to its excellent angular resolution. After range compression, by applying super-resolution algorithms, i.e., sparse Bayesian learning (SBL), on the Doppler dimension and the height dimension sequentially, the 3D point cloud of the target is obtained. However, this cascaded processing approach leads to error accumulation and may even impair the interference phases between antennas. In contrast, joint multi-channel processing can achieve better performance but incurs heavy computational costs. Hence, the SBL method with space-time adaptive dimensionality reduction (STADR SBL) is proposed for 3D imaging efficiently. Firstly, the space-time domain dictionary is constructed for joint sparse recovery in the angular (height) and Doppler frequency dimensions. Then, edge detection is performed on the angle- Doppler spectrum, and the frequency search range of the dictionary is reduced to within the edge boundaries. Finally, the dimensionality-reduced dictionary is further split into a spatial and a temporal dictionary utilizing the Kronecker product property, and super-resolution 3D imaging is achieved efficiently by the fast SBL method. Experiments with both measured real data and simulated data verify the algorithm's effectiveness.
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 62, 17727-17745
Frequency-Domain Decoupling and Subband Synthesis-Based Adaptive Monopulse for Distributed Coherent Aperture Radar in Multidirectional Jamming
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 62, 17727-17745
Frequency-Domain Decoupling and Subband Synthesis-Based Adaptive Monopulse for Distributed Coherent Aperture Radar in Multidirectional Jamming
- 6 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 62 (00189251) , 1339-1355
A Joint Spatial-Temporal Errors Calibration Approach for MIMO-ISAR Imaging
Multiple-input-multiple-output inverse synthetic aperture radar (MIMO-ISAR), which features a large real aperture, exhibits excellent angular resolution. However, the coherence of the MIMO array is severely impaired by various errors (i.e., amplitude-phase errors, position errors, and time synchronization errors). To tackle this issue, a multi-error calibration method based on joint space-time phase gradient autofocus (JST-PGA) is proposed. First, the estimation of the three types of errors are simplified into the correction of the channel amplitude-phase errors. Subsequently, the channel amplitude errors (CAEs) are estimated by comparing the envelopes of high signal-clutter-ratio (SCR) samples. Finally, with the space-time (channel-pulse) equivalence, the spatial PGA (SPGA) method is utilized to rectify the channel phase errors (CPEs). To mitigate the error accumulation caused by signal cascaded processing, the JST-PGA method is further developed. Specifically, angle- Doppler domain autofocusing is performed on the space-time snapshot samples to jointly correct the translational phase and CPEs after compensating the quadratic phase coupling terms. The proposed method innovatively uses the two-dimensional PGA to restore the coherence of the MIMO array, which avoids the requirement for external cooperative scatterers or internal calibration circuits. Real measured and simulated data validate the effectiveness and advantages of this method.
- 6 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 62 (00189251) , 1339-1355
A Joint Spatial-Temporal Errors Calibration Approach for MIMO-ISAR Imaging
Multiple-input-multiple-output inverse synthetic aperture radar (MIMO-ISAR), which features a large real aperture, exhibits excellent angular resolution. However, the coherence of the MIMO array is severely impaired by various errors (i.e., amplitude-phase errors, position errors, and time synchronization errors). To tackle this issue, a multi-error calibration method based on joint space-time phase gradient autofocus (JST-PGA) is proposed. First, the estimation of the three types of errors are simplified into the correction of the channel amplitude-phase errors. Subsequently, the channel amplitude errors (CAEs) are estimated by comparing the envelopes of high signal-clutter-ratio (SCR) samples. Finally, with the space-time (channel-pulse) equivalence, the spatial PGA (SPGA) method is utilized to rectify the channel phase errors (CPEs). To mitigate the error accumulation caused by signal cascaded processing, the JST-PGA method is further developed. Specifically, angle- Doppler domain autofocusing is performed on the space-time snapshot samples to jointly correct the translational phase and CPEs after compensating the quadratic phase coupling terms. The proposed method innovatively uses the two-dimensional PGA to restore the coherence of the MIMO array, which avoids the requirement for external cooperative scatterers or internal calibration circuits. Real measured and simulated data validate the effectiveness and advantages of this method.
- 27 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Radar Systems
- Vol. 3, 392-405
Instantaneous Single-Station Location and Velocity Estimation of Airborne Noncooperative Emitter Using Clutter Angle-Doppler Frequencies
Due to the unknown location of the non-cooperative airborne emitter, their application as external radiation for passive radar is limited. Therefore, its location and velocity estimation is a significant problem. This paper first proposes an airborne emitter location and velocity estimation method in airborne passive radar using angle-Doppler frequencies on the clutter spectrum peaks. First, the frequencies on clutter spectrum peaks in each range bin are estimated by the Minimum Variance Distortionless Response (MVDR) of clutter with sub-aperture smoothing (SASM) techniques. Secondly, a parametric approach is proposed to formulate the relationship between the frequencies and parameters of interest. Finally, an intermediate unknown is introduced to simplify the six-dimensional parameter optimization problem into a one-dimensional search. The advantages: The proposed method utilizes clutter information to enhance observability of single-station in a short period, and robustly estimate the location and velocity with a closed-form solution. Cramer-Rao lower bound (CRLB) is derived for theoretical analysis. Simulation experiments validate the effectiveness and advantages of the proposed method.
- 27 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Radar Systems
- Vol. 3, 392-405
Instantaneous Single-Station Location and Velocity Estimation of Airborne Noncooperative Emitter Using Clutter Angle-Doppler Frequencies
Due to the unknown location of the non-cooperative airborne emitter, their application as external radiation for passive radar is limited. Therefore, its location and velocity estimation is a significant problem. This paper first proposes an airborne emitter location and velocity estimation method in airborne passive radar using angle-Doppler frequencies on the clutter spectrum peaks. First, the frequencies on clutter spectrum peaks in each range bin are estimated by the Minimum Variance Distortionless Response (MVDR) of clutter with sub-aperture smoothing (SASM) techniques. Secondly, a parametric approach is proposed to formulate the relationship between the frequencies and parameters of interest. Finally, an intermediate unknown is introduced to simplify the six-dimensional parameter optimization problem into a one-dimensional search. The advantages: The proposed method utilizes clutter information to enhance observability of single-station in a short period, and robustly estimate the location and velocity with a closed-form solution. Cramer-Rao lower bound (CRLB) is derived for theoretical analysis. Simulation experiments validate the effectiveness and advantages of the proposed method.
- 30 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 60 (1) , 1148-1158
Joint Multierror Calibration by Merging Errors in Distributed Coherent Aperture Radar Using Strong Scatter Echoes
Full coherence needs strict phase synchronization in distributed coherent aperture radar (DCAR). However, DCAR suffers from various types of errors, including gain-phase, time alignment, and antenna position errors, which seriously damage phase synchronization. Additionally, they are coupled and difficult to estimate individually. Thus, calibrating these coupled errors is still an intractable problem in improving coherence performance. In this paper, we propose a joint multierror calibration method by merging errors using echoes of several inaccurate-position strong scatters. Firstly, orthogonal waveforms are transmitted in DCAR to obtain transmitting degrees of freedom (DoFs), and its echoes from strong scatters are investigated to estimate the coupled errors jointly. Secondly, parameter extraction is applied to acquire Time Delays (TD) and gain-phase of echo peaks as measurements in error estimation. In particular, gain-phase and time alignment errors are merged as equivalent gain-phase errors, avoiding the high precision requirement of time alignment errors. Then, a practical approximation of the Maximum A Posteriori (MAP) estimator and Singular Value Decomposition (SVD) are employed to obtain estimation solutions for balancing efficiency and precision. Finally, Cram´erRao Lower Bounds (CRLB) of the required parameters and critical unknowns (e.g. antenna positions, radar positions, and attitude angles) are derived to analyze the estimation performance. Simulations are employed to validate the necessity of joint calibration, the advantages of merging errors, and the effectiveness of the proposed method.
- 30 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 60 (1) , 1148-1158
Joint Multierror Calibration by Merging Errors in Distributed Coherent Aperture Radar Using Strong Scatter Echoes
Full coherence needs strict phase synchronization in distributed coherent aperture radar (DCAR). However, DCAR suffers from various types of errors, including gain-phase, time alignment, and antenna position errors, which seriously damage phase synchronization. Additionally, they are coupled and difficult to estimate individually. Thus, calibrating these coupled errors is still an intractable problem in improving coherence performance. In this paper, we propose a joint multierror calibration method by merging errors using echoes of several inaccurate-position strong scatters. Firstly, orthogonal waveforms are transmitted in DCAR to obtain transmitting degrees of freedom (DoFs), and its echoes from strong scatters are investigated to estimate the coupled errors jointly. Secondly, parameter extraction is applied to acquire Time Delays (TD) and gain-phase of echo peaks as measurements in error estimation. In particular, gain-phase and time alignment errors are merged as equivalent gain-phase errors, avoiding the high precision requirement of time alignment errors. Then, a practical approximation of the Maximum A Posteriori (MAP) estimator and Singular Value Decomposition (SVD) are employed to obtain estimation solutions for balancing efficiency and precision. Finally, Cram´erRao Lower Bounds (CRLB) of the required parameters and critical unknowns (e.g. antenna positions, radar positions, and attitude angles) are derived to analyze the estimation performance. Simulations are employed to validate the necessity of joint calibration, the advantages of merging errors, and the effectiveness of the proposed method.