JDJingwen Dong

Jingwen Dong

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jingwen Dong has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • High-Resolution Multimode Electromagnetic Vortex Imaging Driven by the RELAX Algorithm

    by Jiazhen Cai, Xinlu Gao, Jiajie Huang, Jingcan Ma, Yufei Fu, Tianbi Lian, Jingwen Dong, Shangyang Li, Lei Zhang, Bingli Guo, et al.

    Vortex electromagnetic waves carrying orbital angular momentum (OAM) enable differentiated scaling of multiple targets within the beam coverage, granting them superior theoretical performance in multi-dimensional multi-target staring imaging. Owing to the approximate dual relationship between OAM modes and target azimuth angles, multi-mode vortex scanning can rapidly and accurately determine spatial azimuth information of targets, significantly enhancing radar imaging resolution and speed in the azimuthal dimension. Recently, multiple factors, including insufficient OAM mode diversity, complex noise environments and low mode purity, collectively hinder the practical implementation of existing vortex imaging algorithms for high-resolution OAM based radar systems. To address these challenges, this article proposes a high-resolution RELAX algorithm for vortex imaging technology based on precise analysis of echo signal components. The method treats echo signals as superpositions of multiple complex sinusoidal signals and achieves accurate extraction of target positional information through iterative refinement. A comparative analysis of spectral estimation methods, sparse recovery methods and the RELAX method is presented. Experimental results demonstrate that compared to conventional imaging algorithms, the RELAX algorithm exhibits superior target recovery capability, effectively suppresses spurious targets, mitigates noise interference, and significantly improves image resolution, which is particularly pronounced under limited OAM mode diversity. The experimental findings reveal that under with the OAM modes of [-7,7], the RELAX algorithm achieves a limiting resolution of 6.7cm×19°, with the normalized mean-square error of 0.4557 and the image correlation value of 0.6917. This approach substantially alleviates the inherent dependence on OAM mode quantity in vortex radar systems, providing a robust resolution for practical scenarios with constrained electromagnetic (EM) resources. The proposed method notably expands the application scope of vortex EM waves in radar imaging architectures, establishes a solid new technical pathway for vortex radar signal processing, and facilitates the practical deployment of vortex radar.


  • 3-D Imaging in MIMO-ISAR Using Sparse Bayesian Learning With Space-Time Adaptive Dimensionality Reduction

    by Yuxuan Zhang, Jianxin Wu, Lei Zhang, Jingwen Dong, Wangzhe Li

    Multiple-input-multiple-output inverse synthetic aperture radar (MIMO-ISAR) is widely used in three-dimensional (3D) imaging due to its excellent angular resolution. After range compression, by applying super-resolution algorithms, i.e., sparse Bayesian learning (SBL), on the Doppler dimension and the height dimension sequentially, the 3D point cloud of the target is obtained. However, this cascaded processing approach leads to error accumulation and may even impair the interference phases between antennas. In contrast, joint multi-channel processing can achieve better performance but incurs heavy computational costs. Hence, the SBL method with space-time adaptive dimensionality reduction (STADR SBL) is proposed for 3D imaging efficiently. Firstly, the space-time domain dictionary is constructed for joint sparse recovery in the angular (height) and Doppler frequency dimensions. Then, edge detection is performed on the angle- Doppler spectrum, and the frequency search range of the dictionary is reduced to within the edge boundaries. Finally, the dimensionality-reduced dictionary is further split into a spatial and a temporal dictionary utilizing the Kronecker product property, and super-resolution 3D imaging is achieved efficiently by the fast SBL method. Experiments with both measured real data and simulated data verify the algorithm's effectiveness.


  • A Joint Spatial-Temporal Errors Calibration Approach for MIMO-ISAR Imaging

    by Yuxuan Zhang, Jianxin Wu, Lei Zhang, Jingwen Dong, Wangzhe Li

    Multiple-input-multiple-output inverse synthetic aperture radar (MIMO-ISAR), which features a large real aperture, exhibits excellent angular resolution. However, the coherence of the MIMO array is severely impaired by various errors (i.e., amplitude-phase errors, position errors, and time synchronization errors). To tackle this issue, a multi-error calibration method based on joint space-time phase gradient autofocus (JST-PGA) is proposed. First, the estimation of the three types of errors are simplified into the correction of the channel amplitude-phase errors. Subsequently, the channel amplitude errors (CAEs) are estimated by comparing the envelopes of high signal-clutter-ratio (SCR) samples. Finally, with the space-time (channel-pulse) equivalence, the spatial PGA (SPGA) method is utilized to rectify the channel phase errors (CPEs). To mitigate the error accumulation caused by signal cascaded processing, the JST-PGA method is further developed. Specifically, angle- Doppler domain autofocusing is performed on the space-time snapshot samples to jointly correct the translational phase and CPEs after compensating the quadratic phase coupling terms. The proposed method innovatively uses the two-dimensional PGA to restore the coherence of the MIMO array, which avoids the requirement for external cooperative scatterers or internal calibration circuits. Real measured and simulated data validate the effectiveness and advantages of this method.

  • A Modified 2-D Autofocus Approach for 2-D Frequency-Dependent Residual Motion Error in Ultrahigh-Resolution Airborne SAR

    by Chengyi Tu, Zhen Dong, Xing Chen, Zhenyu Hou, Yifei Ji, Wangzhe Li, Jingwen Dong

    Autofocus serves to mitigate the residual motion error (RME) in the airborne synthetic aperture radar (SAR). However, the 2D frequency dependent RME remains unresolved for ultra-high-resolution (UHR) imaging up to the centimeter-scale resolution. To address this issue, a modified 2D autofocus approach is proposed in this paper. Regarding the range frequency dependent error (RFDE), an efficient azimuth resampling strategy combined with the Chirp-z transform (CZT) is devised, which avoids the approximation imposed by the existent subband division method. With respect to the azimuth frequency dependent error (AFDE), it is first reported in this paper, and removed efficiently by a special filter on the support region. The simulation results show that the deviation of the azimuth phase error (APE) can be reduced from ±5 rads to ±0.5 rads after the RFDE removal and ±0.05 rads after the AFDE removal. The real data from an airborne UHR microwave photonic (MWP) SAR is utilized for validation, and four existent autofocus methods are reproduced for comparison. In the cases without sensor-based motion compensation (MoCo), only the proposed method recovers the distinct textures of the manhole cover, demonstrating its robustness. In the cases with sensor-based MoCo, the proposed method achieves the best image quality with almost minimal processing time, demonstrating its efficiency.


  • Asynchronous Dense-Frequency-Interleaved Analog-to-Digital Conversion Breaking the Trade-Off Between Bandwidth and Dynamic Range

    by Jiyao Yang, Jianwei Liu, Zhenwei Mo, Chenyu Liu, Jingwen Dong, Qinyu Xie, Henan Zeng, Ziqiang Yin, Wangzhe Li

    An analog-to-digital converter (ADC) with broad bandwidth and high dynamic range is of the utmost importance for modern radio frequency (RF) applications. However, as the bandwidth increases with the sampling rate, distortions caused by manufacturing defects are deteriorated, thereby decreasing the dynamic range. To break the trade-off, a novel photonics-assisted asynchronous dense-frequency-interleaved ADC with decoupled bandwidth and dynamic range is proposed. By employing an asynchronous photonic channelizer, densely frequency-interleaving is achieved to convert a broadband RF signal into multiple spectrum segments that are then quantized independently by sub-ADCs. The dynamic range is determined only by the sub-ADCs while the bandwidth is determined by the number of segments or frequency-interleaved channels. Thanks to the asynchrony of the frequency-interleaving, frequency-shift dithering is introduced and taken advantage of to suppress the quantization spurs, further enhancing the dynamic range. The performance requirements for both photonic and electronic components are also eased. Experimentally, a dynamic range of 79.0 dB is achieved at a bandwidth of 5.5 GHz, outperforming the state-of-the-art ADCs, and the flexibility of the method in terms of operating frequency range and bandwidth is also demonstrated. The proposed method provides a unique tool for broadband digitization and paves the way toward next-generation RF applications.


  • Multi-Octave Ultra-Wideband Signal Generation Based on Channelized Sub-Bands Stitching With Recirculating Frequency-Shifting

    by Hongru Xu, Shangyang Li, Ziqiang Yin, Jingwen Dong, Yuhui Deng, Ruixuan Wang, Jiajie Huang, Wangzhe Li

    A photonic signal generation scheme based on recirculating frequency-shifting and channelized sub-band stitching is proposed to synthesize high-quality multi-octave broadband linear frequency-modulated (LFM) signals. The scheme employs a hierarchical two-stage approach to expand the bandwidth of a narrowband seed signal. First, recirculating frequency-shifting generates and stitches frequency-shifted signals to obtain a broadband sub-band waveform with first-stage bandwidth expansion. Then, multiple broadband sub-band signals in different channels are precisely aligned and stitched to achieve secondary bandwidth extension, effectively breaking the octave-spanning limitation. The partitioned-channel structure ensures superior spurious suppression performance. A proof-of-concept experiment is designed to demonstrate the generation of a 5–17 GHz cross-octave LFM signal with a 12 GHz bandwidth, a relative bandwidth of 1.09, and an in-band spurious suppression ratio (SSR) of 35 dB, covering the C, X and Ku bands. To verify system flexibility, signals with varying center frequencies and bandwidths are generated without any hardware modification. To assess the practicality of the generation in an actual imaging system, microwave imaging experiments are also conducted. To the best of our knowledge, the proposed ultra-wideband generation has the best SSR in the generation of cross-octave signals, which holds significant application value for high-quality, high-resolution radar imaging.