Oleksandr Sidelnykov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Oleksandr Sidelnykov has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Yevhenii Dobrynin
Naval Institute of the National University "Odessa Maritime Academy
6 shared publications - Maksym Maksymov
Odesа Polytechnic National University
5 shared publications - Olexander Brunetkin
Odesа Polytechnic National University
5 shared publications - Oksana Maksymova
Odesa National Maritime Academy
4 shared publications - Oleksandr Toshev
Odesa Polytechnic National University
4 shared publications - Kristina Zhanko
Department of Software and Computer-Integrated Technologies «Odessа Polytechnic State University», Odesa, Ukraine
2 shared publications
Latest Publications
- Open Access
- 10 June 2026
- Published by OU Scientific Route
Simulation modeling of artillery systems for improving game simulators. From theory to practice
At the present stage of development of computer simulation of military processes, the problem lies not only in obtaining a visually convincing picture of combat actions, but in reproducing their internal logic in such a way that the modelled process resembles a real one not externally only, but by its sequence, interrelations, dependencies, and consequences. This is especially true in relation to artillery systems. In many modern simulators and computer gaming products, one can observe sufficiently advanced visualization, dynamic effects, and a high degree of graphical realism, while the functioning of artillery means itself is often presented in a simplified form, where separate stages are shown, but not united into one logically complete cycle. Because of this, the issue arises of creating such generalized simulation approaches that would make it possible to reproduce the operation of artillery means not as a set of disconnected effects, but as a full process beginning with the choice of a target and continuing through preparation, aiming, firing, flight, influence of disturbances, target hit, and final action of ammunition. This book is devoted exactly to such an approach. Its main idea is to consider artillery functioning in a simulation environment as a complete and internally connected cycle, where every stage has its own logic, its own modelling task, and at the same time forms part of the common system. For this reason, the book consistently addresses trajectory formation, sensor and perception issues, accuracy and randomness, the influence of stochastic disturbances, reaction to changing conditions, and the role of all these factors in forming realistic behaviour of artillery means in a simulator. The importance of such an approach lies in the fact that it allows moving away from purely illustrative reproduction of fire action and toward a more physically and logically grounded simulation, where the visible result becomes only the outer manifestation of deeper modelled processes. A significant feature of the presented material is that the proposed models are generalized and do not include any actual secret tactical or technical characteristics. They were created not for the disclosure of real data, but for the formation of a methodological basis that can be used in educational systems, training environments, computer simulators, and computer gaming. This makes it possible to combine scientific correctness, practical applicability, and safety of use. At the same time, the book is connected not only with simulation itself, but also with automation, computer-integrated technologies, decision support, and operations research, because artillery action is treated here as a complex controlled process influenced by many interrelated factors, including uncertainty, timing, observation, reaction, and probability of result. Thus, the book offers the reader not a fragmented set of separate models, but a holistic view of artillery simulation as a field where mathematical modelling, stochastic methods, ballistic logic, sensor representation, and decision-making principles are combined into one framework. Precisely because of this, the presented material may be useful both for developers of realistic military simulators and gaming products, and for engineers, researchers, cadets, officers, and all those who are interested in creating more realistic and scientifically grounded models of artillery processes.
- 10 June 2026
- Published by OU Scientific Route
Open AccessSimulation modeling of artillery systems for improving game simulators. From theory to practice
At the present stage of development of computer simulation of military processes, the problem lies not only in obtaining a visually convincing picture of combat actions, but in reproducing their internal logic in such a way that the modelled process resembles a real one not externally only, but by its sequence, interrelations, dependencies, and consequences. This is especially true in relation to artillery systems. In many modern simulators and computer gaming products, one can observe sufficiently advanced visualization, dynamic effects, and a high degree of graphical realism, while the functioning of artillery means itself is often presented in a simplified form, where separate stages are shown, but not united into one logically complete cycle. Because of this, the issue arises of creating such generalized simulation approaches that would make it possible to reproduce the operation of artillery means not as a set of disconnected effects, but as a full process beginning with the choice of a target and continuing through preparation, aiming, firing, flight, influence of disturbances, target hit, and final action of ammunition. This book is devoted exactly to such an approach. Its main idea is to consider artillery functioning in a simulation environment as a complete and internally connected cycle, where every stage has its own logic, its own modelling task, and at the same time forms part of the common system. For this reason, the book consistently addresses trajectory formation, sensor and perception issues, accuracy and randomness, the influence of stochastic disturbances, reaction to changing conditions, and the role of all these factors in forming realistic behaviour of artillery means in a simulator. The importance of such an approach lies in the fact that it allows moving away from purely illustrative reproduction of fire action and toward a more physically and logically grounded simulation, where the visible result becomes only the outer manifestation of deeper modelled processes. A significant feature of the presented material is that the proposed models are generalized and do not include any actual secret tactical or technical characteristics. They were created not for the disclosure of real data, but for the formation of a methodological basis that can be used in educational systems, training environments, computer simulators, and computer gaming. This makes it possible to combine scientific correctness, practical applicability, and safety of use. At the same time, the book is connected not only with simulation itself, but also with automation, computer-integrated technologies, decision support, and operations research, because artillery action is treated here as a complex controlled process influenced by many interrelated factors, including uncertainty, timing, observation, reaction, and probability of result. Thus, the book offers the reader not a fragmented set of separate models, but a holistic view of artillery simulation as a field where mathematical modelling, stochastic methods, ballistic logic, sensor representation, and decision-making principles are combined into one framework. Precisely because of this, the presented material may be useful both for developers of realistic military simulators and gaming products, and for engineers, researchers, cadets, officers, and all those who are interested in creating more realistic and scientifically grounded models of artillery processes.
- Open Access
- 1 January 2026
- Published by OU Scientific Route
- p. 117-142
Methods for rapid determination of the composition and condition of nitrocellulose propellants based on thermodynamic modeling
A method for rapid verification of the composition and energetic characteristics of nitrocellulose propellants is presented. It is based on a library approach to solving direct and inverse problems of thermal decomposition modeling. The library method forms a multidimensional array of solutions by varying elemental composition, enthalpy, and combustion conditions. This approach allows efficient determination of propellant composition from measurable parameters, primarily the temperature and combustion conditions of the reaction products, even in ill-conditioned inverse problems. An algorithm for encoding initial parameters and a procedure for successive data reduction ensure unambiguous reconstruction of the composition. Special attention is given to modeling combustion in closed volumes, selecting real-gas equations of state, accounting for pressure effects, chemical equilibrium, and possible formation of condensed phases. The results provide a theoretical and methodological basis for practical tools to rapidly assess propellant condition and refine internal ballistics parameters under limited information.
- 1 January 2026
- Published by OU Scientific Route
- p. 117-142
Open AccessMethods for rapid determination of the composition and condition of nitrocellulose propellants based on thermodynamic modeling
A method for rapid verification of the composition and energetic characteristics of nitrocellulose propellants is presented. It is based on a library approach to solving direct and inverse problems of thermal decomposition modeling. The library method forms a multidimensional array of solutions by varying elemental composition, enthalpy, and combustion conditions. This approach allows efficient determination of propellant composition from measurable parameters, primarily the temperature and combustion conditions of the reaction products, even in ill-conditioned inverse problems. An algorithm for encoding initial parameters and a procedure for successive data reduction ensure unambiguous reconstruction of the composition. Special attention is given to modeling combustion in closed volumes, selecting real-gas equations of state, accounting for pressure effects, chemical equilibrium, and possible formation of condensed phases. The results provide a theoretical and methodological basis for practical tools to rapidly assess propellant condition and refine internal ballistics parameters under limited information.
- Open Access
- 1 January 2026
- Published by OU Scientific Route
- p. 59-88
Model of free carbon formation when firing an artillery piece
A phenomenon present in almost every shot, yet rarely addressed or explained in the literature, has been identified. It manifests itself in the muzzle discharge in the form of a certain volume of soot. The Boudouard thermochemical reaction (also referred to in some sources as the Boudouard–Bell reaction carbon monoxide disproportionation), which accounts for soot formation in propellant gases during firing, has been identified. The conditions under which this reaction can occur are discussed. A distinctive feature of this reaction is the formation of a condensed carbon phase during the firing process after gasification of the propellant charge. Based on the physicochemical processes governing the expansion of propellant gases in the gun barrel, a mathematical model is proposed that makes it possible to estimate the temperature distribution during firing. The initial model is constructed using generally accepted assumptions. The modeling results obtained on its basis can therefore only be regarded as approximate. For this reason, the method relies on simple calculations, making it unnecessary to employ high-performance computing equipment. A simulation of the temperature distribution of propellant gases along the barrel, between the chamber and the moving projectile, was carried out using a model system similar to the 2A38 artillery system. The possibility of varying the extent of the Boudouard–Bell reaction zone (the soot formation zone) depending on the initial parameters is demonstrated. The use of both fresh and degraded propellant charges was modeled. Full and reduced charges were considered. The simulation results reveal the cause of possible initiation of a secondary muzzle flash, both from the frontal side and from the side of the muzzle brake.
- 1 January 2026
- Published by OU Scientific Route
- p. 59-88
Open AccessModel of free carbon formation when firing an artillery piece
A phenomenon present in almost every shot, yet rarely addressed or explained in the literature, has been identified. It manifests itself in the muzzle discharge in the form of a certain volume of soot. The Boudouard thermochemical reaction (also referred to in some sources as the Boudouard–Bell reaction carbon monoxide disproportionation), which accounts for soot formation in propellant gases during firing, has been identified. The conditions under which this reaction can occur are discussed. A distinctive feature of this reaction is the formation of a condensed carbon phase during the firing process after gasification of the propellant charge. Based on the physicochemical processes governing the expansion of propellant gases in the gun barrel, a mathematical model is proposed that makes it possible to estimate the temperature distribution during firing. The initial model is constructed using generally accepted assumptions. The modeling results obtained on its basis can therefore only be regarded as approximate. For this reason, the method relies on simple calculations, making it unnecessary to employ high-performance computing equipment. A simulation of the temperature distribution of propellant gases along the barrel, between the chamber and the moving projectile, was carried out using a model system similar to the 2A38 artillery system. The possibility of varying the extent of the Boudouard–Bell reaction zone (the soot formation zone) depending on the initial parameters is demonstrated. The use of both fresh and degraded propellant charges was modeled. Full and reduced charges were considered. The simulation results reveal the cause of possible initiation of a secondary muzzle flash, both from the frontal side and from the side of the muzzle brake.
- 1 January 2026
- Published by Lviv Polytechnic National University in Energy Engineering and Control Systems
- Vol. 12 (1) , 75-94
Optimization of Ammunition Distribution Strategy for Artillery Target Firing Mission Considering Artillery Unit Wear
Reports from modern conflicts clearly highlight technological changes in military strategies, tactics and doctrines. At the same time, artillery is still playing a huge role in combat operations, which in turn increases the demand for artillery ammunition and creates additional logistical challenges. Ammunition of insufficient quality greatly impacts the outcome of artillery combat operations. The study identifies the lack of a mathematical model which considers the possible ammunition resource limitations and defects in artillery systems when estimating the effectiveness of target firing. The study proposes a discrete stochastic model for estimating the effectiveness of artillery battery target firing and takes into consideration combat mission objectives and resource limitations. The study proposes using acceptance sampling strategies for the mission preparation phase, based on binomial and hypergeometric distributions, to optimize ammunition quality validation process and minimize preparation time. The model allows comparing different strategies for ammunition distribution and the use of artillery systems with different quality for defined combat mission tasks and restrictions. Additionally, the model takes into consideration the probability of enemy retaliation fire, which impacts the overall fire accuracy of artillery battery and the time required for repositioning maneuver to decrease the probability of enemy retaliation. Calculation results allow for strategy evaluation using two criteria: the efficiency coefficient, defined as the ratio of expected hits to total shots fired, and the total time required for mission completion, including both preparation and execution phases. Experiments compare multiple strategy combinations across different mission scenarios, varying required hit counts, danger coefficients, artillery battery compositions and ammunition distribution approaches. The experiment results demonstrate the possible trade-offs between mission preparation and execution time and ammunition usage efficiency. The proposed model provides a calculation tool which could be used during initial mission planning and resources allocation to provide more accurate estimations for possible strategy outcomes.
- 1 January 2026
- Published by Lviv Polytechnic National University in Energy Engineering and Control Systems
- Vol. 12 (1) , 75-94
Optimization of Ammunition Distribution Strategy for Artillery Target Firing Mission Considering Artillery Unit Wear
Reports from modern conflicts clearly highlight technological changes in military strategies, tactics and doctrines. At the same time, artillery is still playing a huge role in combat operations, which in turn increases the demand for artillery ammunition and creates additional logistical challenges. Ammunition of insufficient quality greatly impacts the outcome of artillery combat operations. The study identifies the lack of a mathematical model which considers the possible ammunition resource limitations and defects in artillery systems when estimating the effectiveness of target firing. The study proposes a discrete stochastic model for estimating the effectiveness of artillery battery target firing and takes into consideration combat mission objectives and resource limitations. The study proposes using acceptance sampling strategies for the mission preparation phase, based on binomial and hypergeometric distributions, to optimize ammunition quality validation process and minimize preparation time. The model allows comparing different strategies for ammunition distribution and the use of artillery systems with different quality for defined combat mission tasks and restrictions. Additionally, the model takes into consideration the probability of enemy retaliation fire, which impacts the overall fire accuracy of artillery battery and the time required for repositioning maneuver to decrease the probability of enemy retaliation. Calculation results allow for strategy evaluation using two criteria: the efficiency coefficient, defined as the ratio of expected hits to total shots fired, and the total time required for mission completion, including both preparation and execution phases. Experiments compare multiple strategy combinations across different mission scenarios, varying required hit counts, danger coefficients, artillery battery compositions and ammunition distribution approaches. The experiment results demonstrate the possible trade-offs between mission preparation and execution time and ammunition usage efficiency. The proposed model provides a calculation tool which could be used during initial mission planning and resources allocation to provide more accurate estimations for possible strategy outcomes.
- Open Access
- 29 December 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 6 (3 (138)) , 26-34
Building a model of artillery firing efficiency under conditions of limited ammunition resources and barrel wear
This study examines the process of destroying individual and group targets by an artillery battery under conditions of limited ammunition of a given quality and varying degrees of barrel bore wear. The task addressed relates to the revealed lack of a quantitative model that would make it possible to assess the effectiveness of aimed or planar fire in the presence of resource limitations on shots and barrel bore wear, which could facilitate determining the threshold conditions for the feasibility of continuing fire. A discrete stochastic model of the effectiveness of firing an artillery unit has been proposed. The model is designed to assess the effectiveness of aimed fire under conditions of limited resource of high-quality ammunition. The model also takes into account the presence of guns in the unit, the barrels of which have different levels of wear. It is proposed to divide shots from each gun in the artillery unit into four different classes, which takes into account the quality of the shot elements: the projectile and the propellant charge, as well as the condition of the barrel. It is proposed to consider the successive states of the artillery unit's guns as elements of the Markov chain. It was established that it is possible to achieve a firing efficiency coefficient that lies within the range of 0.63−0.83. The limiting estimate of the firing efficiency coefficient of the artillery unit on a separate target was obtained, which is equal to 0.5. The results showed that when the limiting value of the firing efficiency coefficient is obtained, aimed fire degenerates into planar target destruction with enlarged scattering ellipses. This state leads to an almost twofold increase in the cost of shots and the time of firing, which sharply increases the risk of counter-battery damage to the battery. Such results are attributed to the combination of the accepted classification of shots by quality, taking into account the increased wear of the barrel bores due to a decrease in the probability of hitting, and the analysis of a set of realistic gun firing strategies. The model could be offered for performing tactical calculations when choosing a fire mode, the structure of using available ammunition, and assessing the feasibility of switching from aimed to plane fire
- 29 December 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 6 (3 (138)) , 26-34
Open AccessBuilding a model of artillery firing efficiency under conditions of limited ammunition resources and barrel wear
This study examines the process of destroying individual and group targets by an artillery battery under conditions of limited ammunition of a given quality and varying degrees of barrel bore wear. The task addressed relates to the revealed lack of a quantitative model that would make it possible to assess the effectiveness of aimed or planar fire in the presence of resource limitations on shots and barrel bore wear, which could facilitate determining the threshold conditions for the feasibility of continuing fire. A discrete stochastic model of the effectiveness of firing an artillery unit has been proposed. The model is designed to assess the effectiveness of aimed fire under conditions of limited resource of high-quality ammunition. The model also takes into account the presence of guns in the unit, the barrels of which have different levels of wear. It is proposed to divide shots from each gun in the artillery unit into four different classes, which takes into account the quality of the shot elements: the projectile and the propellant charge, as well as the condition of the barrel. It is proposed to consider the successive states of the artillery unit's guns as elements of the Markov chain. It was established that it is possible to achieve a firing efficiency coefficient that lies within the range of 0.63−0.83. The limiting estimate of the firing efficiency coefficient of the artillery unit on a separate target was obtained, which is equal to 0.5. The results showed that when the limiting value of the firing efficiency coefficient is obtained, aimed fire degenerates into planar target destruction with enlarged scattering ellipses. This state leads to an almost twofold increase in the cost of shots and the time of firing, which sharply increases the risk of counter-battery damage to the battery. Such results are attributed to the combination of the accepted classification of shots by quality, taking into account the increased wear of the barrel bores due to a decrease in the probability of hitting, and the analysis of a set of realistic gun firing strategies. The model could be offered for performing tactical calculations when choosing a fire mode, the structure of using available ammunition, and assessing the feasibility of switching from aimed to plane fire
- Open Access
- 17 June 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (6 (135)) , 35-45
Improving the model for determining the composition of gunpowder gases during thermal destruction of gunpowder in a limited volume space
The object of this study is a model of the process of formation of products of thermal destruction of nitrocellulose powder at different values of pressure of the mixture of powder gases. The work is aimed at eliminating the uncertainty in the list of powder combustion products. In many cases, the formation of condensed carbon during the shot is not taken into account, which does not correspond to the real process. The process of formation of powder combustion products has been studied both under experimental conditions at a pressure of several MPa, and under shot conditions at a pressure of ~300 MPa and more. The proposed model makes it possible to explain the cause and conditions of condensed carbon formation. The possibility of formation of up to 10 % of condensed carbon from the initial mass of powder during the shot has been shown. An improved model was built using the molar composition of the combustion products. The calculation of the specific volumes of gaseous reaction products with a change in the pressure of the gas mixture was carried out taking into account the change in their compressibility coefficient based on the Peng-Robinson equation. Within the limits of pressure values change during the shot process, the possibility of changing the equilibrium constant values in the range from ~40 % to twofold has been shown. The formation of condensed carbon is explained by the reaction of carbon monoxide disproportionation. The range of values of thermodynamic parameters of powder gases that ensure the possibility of this reaction was identified. The proposed model could be used in the experimental determination of the composition and energy characteristics of a powder sample in the field based on the library method. Given the identified powder composition, the problem of internal ballistics could be solved for the prompt determination of shot parameters
- 17 June 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (6 (135)) , 35-45
Open AccessImproving the model for determining the composition of gunpowder gases during thermal destruction of gunpowder in a limited volume space
The object of this study is a model of the process of formation of products of thermal destruction of nitrocellulose powder at different values of pressure of the mixture of powder gases. The work is aimed at eliminating the uncertainty in the list of powder combustion products. In many cases, the formation of condensed carbon during the shot is not taken into account, which does not correspond to the real process. The process of formation of powder combustion products has been studied both under experimental conditions at a pressure of several MPa, and under shot conditions at a pressure of ~300 MPa and more. The proposed model makes it possible to explain the cause and conditions of condensed carbon formation. The possibility of formation of up to 10 % of condensed carbon from the initial mass of powder during the shot has been shown. An improved model was built using the molar composition of the combustion products. The calculation of the specific volumes of gaseous reaction products with a change in the pressure of the gas mixture was carried out taking into account the change in their compressibility coefficient based on the Peng-Robinson equation. Within the limits of pressure values change during the shot process, the possibility of changing the equilibrium constant values in the range from ~40 % to twofold has been shown. The formation of condensed carbon is explained by the reaction of carbon monoxide disproportionation. The range of values of thermodynamic parameters of powder gases that ensure the possibility of this reaction was identified. The proposed model could be used in the experimental determination of the composition and energy characteristics of a powder sample in the field based on the library method. Given the identified powder composition, the problem of internal ballistics could be solved for the prompt determination of shot parameters
- Open Access
- 28 March 2025
- Published by OU Scientific Route in EUREKA: Physics and Engineering
- No. 2,p. 199-210
Verification of artillery systems' shots: selection of the most appropriate sensors based on the fuzzy evaluation model
Long-range artillery remains vital in modern warfare, where precision and innovative methods are key to completing fire missions with fewer rounds. Developing advanced techniques of artillery shots verification based on sensor systems that maximize target destruction with minimal ammunition and exposure time is essential for maintaining the combat effectiveness of artillery units. Moreover, one of the complex and important tasks that must be solved in the verification process before each shot is to determine the optimal combination of three sensors from the entire available set included in the sensor system in the firing zone. To solve this problem the paper introduces an approach for selecting the three most appropriate acoustic sensors for artillery shot verification using a fuzzy evaluation model. The approach considers location, measurement error, and probability of failure-free operation at selecting sensors to effectively register ballistic and muzzle waves, with further assessment of the suitability of each sensor. For adequate assessment of acoustic sensors, the presented approach uses a developed fuzzy logic model that allows calculating the value of the sensor suitability criterion for the verification of the current artillery shot. A computational experiment with fixed artillery shot parameters was conducted to evaluate the proposed approach and fuzzy model, successfully identifying three optimal acoustic sensors for precise recording of ballistic and muzzle waves. The obtained results confirm the effectiveness and feasibility of the proposed approach and fuzzy model for selecting the best sensors for artillery shot verification and determining projectile impact coordinates under random disturbances.
- 28 March 2025
- Published by OU Scientific Route in EUREKA: Physics and Engineering
- No. 2,p. 199-210
Open AccessVerification of artillery systems' shots: selection of the most appropriate sensors based on the fuzzy evaluation model
Long-range artillery remains vital in modern warfare, where precision and innovative methods are key to completing fire missions with fewer rounds. Developing advanced techniques of artillery shots verification based on sensor systems that maximize target destruction with minimal ammunition and exposure time is essential for maintaining the combat effectiveness of artillery units. Moreover, one of the complex and important tasks that must be solved in the verification process before each shot is to determine the optimal combination of three sensors from the entire available set included in the sensor system in the firing zone. To solve this problem the paper introduces an approach for selecting the three most appropriate acoustic sensors for artillery shot verification using a fuzzy evaluation model. The approach considers location, measurement error, and probability of failure-free operation at selecting sensors to effectively register ballistic and muzzle waves, with further assessment of the suitability of each sensor. For adequate assessment of acoustic sensors, the presented approach uses a developed fuzzy logic model that allows calculating the value of the sensor suitability criterion for the verification of the current artillery shot. A computational experiment with fixed artillery shot parameters was conducted to evaluate the proposed approach and fuzzy model, successfully identifying three optimal acoustic sensors for precise recording of ballistic and muzzle waves. The obtained results confirm the effectiveness and feasibility of the proposed approach and fuzzy model for selecting the best sensors for artillery shot verification and determining projectile impact coordinates under random disturbances.
- Open Access
- 10 September 2024
- Published by OU Scientific Route in EUREKA: Physics and Engineering
- No. 5,p. 99-112
Development of a process model for determining the composition and energy characteristics of a pyrotechnic mixture using the library method
The range of changes in the characteristics of powder mixtures, even of the same brand, expands due to different storage periods and progressive degradation of the powders. The need to simplify the procedure for determining the composition and energy characteristics of the powders used is emphasized. The purpose of simplification is to increase the number of quality control points for incoming charges, bring them closer to combat formations, and reduce the requirements for service personnel. It is proposed to determine the actual composition and energy characteristics of the powder charge based on the library method. This approach requires a large amount of calculations – multiple solutions to the problem of equilibrium conversion of the original powder mixture into combustion products. But these calculations for a given brand of powder are carried out in advance, once and in laboratory conditions. The characteristics of a specific charge sample are determined using library data based on the measured technological parameters of its combustion process - the mass of the burned sample and the temperature of the powder gases. To be able to take into account soot formation and gaseous products of thermal destruction of powder when solving problems for filling the library, the equilibrium model of such a process has been modernized. Instead of partial pressures and concentrations of substances, their mole fractions are considered. The use of partial pressures is convenient when there are only gaseous products. The use of mole fractions made it possible to uniformly take into account the gaseous and condensed phases of combustion products. The modernized calculation model was verified by comparing the obtained results with known data. The need to validate the list of combustion products in each case under consideration was determined
- 10 September 2024
- Published by OU Scientific Route in EUREKA: Physics and Engineering
- No. 5,p. 99-112
Open AccessDevelopment of a process model for determining the composition and energy characteristics of a pyrotechnic mixture using the library method
The range of changes in the characteristics of powder mixtures, even of the same brand, expands due to different storage periods and progressive degradation of the powders. The need to simplify the procedure for determining the composition and energy characteristics of the powders used is emphasized. The purpose of simplification is to increase the number of quality control points for incoming charges, bring them closer to combat formations, and reduce the requirements for service personnel. It is proposed to determine the actual composition and energy characteristics of the powder charge based on the library method. This approach requires a large amount of calculations – multiple solutions to the problem of equilibrium conversion of the original powder mixture into combustion products. But these calculations for a given brand of powder are carried out in advance, once and in laboratory conditions. The characteristics of a specific charge sample are determined using library data based on the measured technological parameters of its combustion process - the mass of the burned sample and the temperature of the powder gases. To be able to take into account soot formation and gaseous products of thermal destruction of powder when solving problems for filling the library, the equilibrium model of such a process has been modernized. Instead of partial pressures and concentrations of substances, their mole fractions are considered. The use of partial pressures is convenient when there are only gaseous products. The use of mole fractions made it possible to uniformly take into account the gaseous and condensed phases of combustion products. The modernized calculation model was verified by comparing the obtained results with known data. The need to validate the list of combustion products in each case under consideration was determined
- 1 November 2023
- Published by Odessa Polytechnic National University in ELECTRICAL AND COMPUTER SYSTEMS
- Vol. 38 (114) , 30-39
AUTOMATED CONTROL OF THE HEAT SUPPLY SYSTEM WITH A VARIABLE STRUCTURE ACCORDING TO THE VALUE OF THE OBJECTIVE FUNCTION OF THE OPTIMIZATION PROBLEM
- 1 November 2023
- Published by Odessa Polytechnic National University in ELECTRICAL AND COMPUTER SYSTEMS
- Vol. 38 (114) , 30-39
AUTOMATED CONTROL OF THE HEAT SUPPLY SYSTEM WITH A VARIABLE STRUCTURE ACCORDING TO THE VALUE OF THE OBJECTIVE FUNCTION OF THE OPTIMIZATION PROBLEM
- 1 November 2023
- Published by Odessa Polytechnic National University in ELECTRICAL AND COMPUTER SYSTEMS
- No. 38(114),p. 30-39
AUTOMATED CONTROL OF THE HEAT SUPPLY SYSTEM WITH A VARIABLE STRUCTURE ACCORDING TO THE VALUE OF THE OBJECTIVE FUNCTION OF THE OPTIMIZATION PROBLEM
Object-oriented models of the object and the control system, based on data ware and software improvement, for elements of the computer-integrated control system designed for a heat supply system, have been worked out. Also, a complex criterion of optimal control of the heat supply system structure on the basis of engineering-and-economic performance, as well as control algorithms defining the optimal structure of the system and using genetic algorithms, have been proposed. Research of the control efficiency using a simulation model of the heat supply system has been carried out. Keywords: computer-integrated control system, structure variation control, optimal control criterion, object-oriented analysis, engineering-and-economic performance, genetic algorithm.
- 1 November 2023
- Published by Odessa Polytechnic National University in ELECTRICAL AND COMPUTER SYSTEMS
- No. 38(114),p. 30-39
AUTOMATED CONTROL OF THE HEAT SUPPLY SYSTEM WITH A VARIABLE STRUCTURE ACCORDING TO THE VALUE OF THE OBJECTIVE FUNCTION OF THE OPTIMIZATION PROBLEM
Object-oriented models of the object and the control system, based on data ware and software improvement, for elements of the computer-integrated control system designed for a heat supply system, have been worked out. Also, a complex criterion of optimal control of the heat supply system structure on the basis of engineering-and-economic performance, as well as control algorithms defining the optimal structure of the system and using genetic algorithms, have been proposed. Research of the control efficiency using a simulation model of the heat supply system has been carried out. Keywords: computer-integrated control system, structure variation control, optimal control criterion, object-oriented analysis, engineering-and-economic performance, genetic algorithm.