Elvira Sarybayeva
Research Subjects
Elvira Sarybayeva has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Bekzhan Abzalbekuly
Dulaty University
6 shared publications - Farkhad Tashmukhamedov
Department of Textiles, Materials Science and Standardization M.Kh. Dulaty Taraz University Taraz Kazakhstan
6 shared publications - Mukhamejan Shardarbek
M.Kh. Dulaty Taraz University
6 shared publications - Gulzat Oraz
Taraz University named after M.Kh. Dulaty
5 shared publications - Rakhimzhan Kauymbaev
M.Kh. Dulaty Taraz University
4 shared publications - Zhanerke Borkulakova
M.Kh. Dulaty Taraz University
4 shared publications
Latest Publications
- Open Access
- 14 July 2026
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 23 (1)
Influence of Biocidal Treatment on Antimicrobial Performance and Mechanical Behavior of Wool Nonwovens
- 14 July 2026
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 23 (1)
Open AccessInfluence of Biocidal Treatment on Antimicrobial Performance and Mechanical Behavior of Wool Nonwovens
- 30 June 2026
- Published by Dulaty University in Mechanics and Technologies
- No. 2,p. 245-254
INTEGRATED STRUCTURAL AND CHEMICAL ANALYSIS OF YARN FOR COMPRESSION KNITWEAR FOR THERAPEUTIC PURPOSES
This paper presents a comprehensive assessment of the structural, chemical, and physical-mechanical characteristics of yarn intended for the production of therapeutic and prophylactic compression knitwear. Samples of natural, blended and elastomeric yarns of various fibre compositions (cashmere, wool, cotton, acrylic, polyurethane) were studied.Microscopic analysis allowed the morphological features of the fibres to be established and their nature to be confirmed. The FTIR-ATR method provided molecular identification of protein, cellulose and synthetic components. The assessment of the physical and mechanical properties revealed the differentiated behaviour of the yarn under tension and determined its ability to form a stable elastic system in the structureof compression knitwear.It was established that blended systems based on wool and acrylic provide an optimal combination of strength and elasticity, while elastane yarn plays a key role in forming a stable compression effect. The results obtained form a scientifically sound basis for the selection of yarn in the development of medical knitwear.
- 30 June 2026
- Published by Dulaty University in Mechanics and Technologies
- No. 2,p. 245-254
INTEGRATED STRUCTURAL AND CHEMICAL ANALYSIS OF YARN FOR COMPRESSION KNITWEAR FOR THERAPEUTIC PURPOSES
This paper presents a comprehensive assessment of the structural, chemical, and physical-mechanical characteristics of yarn intended for the production of therapeutic and prophylactic compression knitwear. Samples of natural, blended and elastomeric yarns of various fibre compositions (cashmere, wool, cotton, acrylic, polyurethane) were studied.Microscopic analysis allowed the morphological features of the fibres to be established and their nature to be confirmed. The FTIR-ATR method provided molecular identification of protein, cellulose and synthetic components. The assessment of the physical and mechanical properties revealed the differentiated behaviour of the yarn under tension and determined its ability to form a stable elastic system in the structureof compression knitwear.It was established that blended systems based on wool and acrylic provide an optimal combination of strength and elasticity, while elastane yarn plays a key role in forming a stable compression effect. The results obtained form a scientifically sound basis for the selection of yarn in the development of medical knitwear.
- 25 December 2025
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- Vol. 150 (4)
Microscopic analysis of the structures of textile materials dyed with natural dyes
This work is devoted to the study of the problem of environmental pollution caused by the use of synthetic dyes in the textile industry, and offers a solution in the form of using natural dyes of plant origin. Synthetic dyes, despite their cheapness and stability, cause significant harm to the environment and human health. In this regard, the aim of the study is to develop technologies for dyeing textile materials using extracts of natural dyes obtained from local plant materials.The scientific significance of the study lies in the in-depth analysis of the effect of natural dyes on the properties of textile materials and in the proposal of environmentally friendly technologies for their processing. The practical significance of the work lies in the possibility of developing innovative dyeing methods that can reduce environmental pollution and ensure the resistance of fabric to washing and wear.The research methodology includes the use of a field emission scanning electron microscope with an X-ray spectral microanalyzer to study the morphology of the fabric surface and the elemental composition of fibers before and after dyeing with natural dyes with mordant. The main results show that adding mordant to extracts improves color saturation and fastness, and also improves the physical and mechanical properties of fabrics. The study revealed changes in the chemical composition of fibers, such as an increase in the content of aluminum, potassium and titanium, which confirms the effectiveness of the technologies used.The value of the study lies in promoting the concept of sustainable and environmentally friendly production in the textile industry, as well as in proposing new dyeing methods that can significantly reduce the environmental burden. The practical significance of the work is to develop a technological basis for the production of environmentally friendly textiles that can be used in various areas of the light industry.
- 25 December 2025
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- Vol. 150 (4)
Microscopic analysis of the structures of textile materials dyed with natural dyes
This work is devoted to the study of the problem of environmental pollution caused by the use of synthetic dyes in the textile industry, and offers a solution in the form of using natural dyes of plant origin. Synthetic dyes, despite their cheapness and stability, cause significant harm to the environment and human health. In this regard, the aim of the study is to develop technologies for dyeing textile materials using extracts of natural dyes obtained from local plant materials.The scientific significance of the study lies in the in-depth analysis of the effect of natural dyes on the properties of textile materials and in the proposal of environmentally friendly technologies for their processing. The practical significance of the work lies in the possibility of developing innovative dyeing methods that can reduce environmental pollution and ensure the resistance of fabric to washing and wear.The research methodology includes the use of a field emission scanning electron microscope with an X-ray spectral microanalyzer to study the morphology of the fabric surface and the elemental composition of fibers before and after dyeing with natural dyes with mordant. The main results show that adding mordant to extracts improves color saturation and fastness, and also improves the physical and mechanical properties of fabrics. The study revealed changes in the chemical composition of fibers, such as an increase in the content of aluminum, potassium and titanium, which confirms the effectiveness of the technologies used.The value of the study lies in promoting the concept of sustainable and environmentally friendly production in the textile industry, as well as in proposing new dyeing methods that can significantly reduce the environmental burden. The practical significance of the work is to develop a technological basis for the production of environmentally friendly textiles that can be used in various areas of the light industry.
- Open Access
- 27 October 2025
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 22 (1)
Optimization of Warmth Retention in Nonwoven Materials Made from Coarse and Semi-Coarse Sheep Wool
- 27 October 2025
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 22 (1)
Open AccessOptimization of Warmth Retention in Nonwoven Materials Made from Coarse and Semi-Coarse Sheep Wool
- Open Access
- 5 October 2025
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 22 (1)
Calligonum aphyllum extract as sustainable colorant for fabric treatment
- 5 October 2025
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 22 (1)
Open AccessCalligonum aphyllum extract as sustainable colorant for fabric treatment
- Open Access
- 20 March 2025
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- Vol. 147 (1) , 160-170
IR spectroscopic studies of the structure of textile materials dyed with natural dyes
This work is devoted to the study of the possibilities of using plant extracts for dyeing fabrics, in order to increase the environmental friendliness and stability of colouring in comparison with traditional synthetic dyes. Jujugine extract, which has bright dyeing properties, was chosen as the starting material for the study. The main objective of the work is to evaluate the effectiveness of different methods of dyeing fabrics using plant extracts, and to study ways of improving colour fastness by using natural and synthetic fixing agents such as alum. The methodology of the study includes extraction of dyes from the plant, application of the extract to fabrics and application of alum to improve the fastness. Methods such as infrared spectroscopy (IR spectroscopy) and visual assessment of colour intensity and stability under different conditions (washing, exposure to light, etc.) were used to analyse changes in fabric structure and dyes. The results of the study showed that jujugin extracts can serve as effective natural dyes, and the addition of alum significantly improves their durability, especially in prolonged contact with water and sunlight. The study confirmed the high prospectivity of the use of plant extracts in the textile industry, which helps to reduce the use of synthetic chemicals and improve the environmental sustainability of production. The contribution of the work is to expand the knowledge of the use of natural dyes, as well as to develop methods to improve their performance characteristics. The practical significance of the work lies in the possibility of implementing the results obtained in the production of environmentally friendly and resistant textile products, which is of great importance for the sustainable development of the industry.
- 20 March 2025
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- Vol. 147 (1) , 160-170
Open AccessIR spectroscopic studies of the structure of textile materials dyed with natural dyes
This work is devoted to the study of the possibilities of using plant extracts for dyeing fabrics, in order to increase the environmental friendliness and stability of colouring in comparison with traditional synthetic dyes. Jujugine extract, which has bright dyeing properties, was chosen as the starting material for the study. The main objective of the work is to evaluate the effectiveness of different methods of dyeing fabrics using plant extracts, and to study ways of improving colour fastness by using natural and synthetic fixing agents such as alum. The methodology of the study includes extraction of dyes from the plant, application of the extract to fabrics and application of alum to improve the fastness. Methods such as infrared spectroscopy (IR spectroscopy) and visual assessment of colour intensity and stability under different conditions (washing, exposure to light, etc.) were used to analyse changes in fabric structure and dyes. The results of the study showed that jujugin extracts can serve as effective natural dyes, and the addition of alum significantly improves their durability, especially in prolonged contact with water and sunlight. The study confirmed the high prospectivity of the use of plant extracts in the textile industry, which helps to reduce the use of synthetic chemicals and improve the environmental sustainability of production. The contribution of the work is to expand the knowledge of the use of natural dyes, as well as to develop methods to improve their performance characteristics. The practical significance of the work lies in the possibility of implementing the results obtained in the production of environmentally friendly and resistant textile products, which is of great importance for the sustainable development of the industry.
- 30 September 2024
- Published by Dulaty University in Mechanics and Technologies
- No. 3,p. 399-405
ANALYSIS OF PRODUCTION AND PROPERTIES OF NONWOVENS: GLOBAL TRENDS AND DEVELOPMENT IN KAZAKHSTAN
Nonwovens are versatile textile materials with low cost of production and unique properties. The production of nonwovens is a growing industry that needs the development of technology, equipment, raw materials and properties for optimal utilisation. The purpose of this article is to analyse the global nonwovens market and the state of the nonwovens market in Kazakhstan, as well as the factors influencing the properties of finished nonwovens. To achieve this goal, the article uses such research methods as literature review, case studies.
- 30 September 2024
- Published by Dulaty University in Mechanics and Technologies
- No. 3,p. 399-405
ANALYSIS OF PRODUCTION AND PROPERTIES OF NONWOVENS: GLOBAL TRENDS AND DEVELOPMENT IN KAZAKHSTAN
Nonwovens are versatile textile materials with low cost of production and unique properties. The production of nonwovens is a growing industry that needs the development of technology, equipment, raw materials and properties for optimal utilisation. The purpose of this article is to analyse the global nonwovens market and the state of the nonwovens market in Kazakhstan, as well as the factors influencing the properties of finished nonwovens. To achieve this goal, the article uses such research methods as literature review, case studies.
- Open Access
- 18 September 2024
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- Vol. 145 (3) , 157-163
Research of coloristic properties of textile materials dyed with natural dyestuff
The development of an environmentally friendly technology for dyeing textile materials for various purposes implies the modification of technological processes by using less harmful consumables, namely, dyes of plant origin. Dyes of plant origin have biological decomposability and the most friendly to human nature, and many of them also have a complex of antibacterial and medicinal properties. The purpose of this work is to study the colorimetric properties and develop mathematical models of the obtained dyes based on natural herbs. Extracts of dyes for dyeing textile materials are obtained from the peel of onions, walnut shell, tansy and hypericum with the addition of the following modifying components: aluminum-potassium alum or copper sulfate. The study of the coloristic properties of the obtained dyes was carried out using the Konica Minolta CM-3600d device in the color coordinates 360-700 nm. The results of the study showed the high efficiency of the use of modifying additives in the composition of dyes on the quality of coloring of textile materials. Based on the results of coloristic studies, regression equations and mathematical models describing the effects of staining depth and color reflection on the intensity of tissue coloring are constructed. Due to the active extraction of natural dyes and expanded color shades, the introduction of natural dyes into the textile industry is an urgent task. The introduction of developed natural dyes with modifying additives will improve the hygienic properties of products and increase the environmental friendliness of the finishing process.
- 18 September 2024
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- Vol. 145 (3) , 157-163
Open AccessResearch of coloristic properties of textile materials dyed with natural dyestuff
The development of an environmentally friendly technology for dyeing textile materials for various purposes implies the modification of technological processes by using less harmful consumables, namely, dyes of plant origin. Dyes of plant origin have biological decomposability and the most friendly to human nature, and many of them also have a complex of antibacterial and medicinal properties. The purpose of this work is to study the colorimetric properties and develop mathematical models of the obtained dyes based on natural herbs. Extracts of dyes for dyeing textile materials are obtained from the peel of onions, walnut shell, tansy and hypericum with the addition of the following modifying components: aluminum-potassium alum or copper sulfate. The study of the coloristic properties of the obtained dyes was carried out using the Konica Minolta CM-3600d device in the color coordinates 360-700 nm. The results of the study showed the high efficiency of the use of modifying additives in the composition of dyes on the quality of coloring of textile materials. Based on the results of coloristic studies, regression equations and mathematical models describing the effects of staining depth and color reflection on the intensity of tissue coloring are constructed. Due to the active extraction of natural dyes and expanded color shades, the introduction of natural dyes into the textile industry is an urgent task. The introduction of developed natural dyes with modifying additives will improve the hygienic properties of products and increase the environmental friendliness of the finishing process.
- Open Access
- 26 March 2024
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- Vol. 143 (1) , 203-210
Research of physical and mechanical properties of knitted fabrics of plush interlooping with reduced material consumption
The article discusses methods for manufacturing lined weave plush knitwear and ways to reduce the material intensity of knitted fabrics. The purpose of the study is to reduce the material consumption of products while maintaining operational, hygienic and aesthetic properties in the production of knitted fabrics. As a result of experimental work, the technological capabilities of the KН-323D flat knitting machine were studied and new types of lined weave plush knitwear were developed. Comparing the bulk density of plush knitwear with elongated lining broaches with the main base weave, it is clear that the presence of elongated lining broaches in the knitwear structure increases the thickness of the knitwear and reduces the bulk density. The breathability of a lined weave plush jersey is significantly less than that of a basic weave. It has been established that air permeability coefficients can be reduced to 33.1% (46.3-66.9 cm3/cm2∙sec) by adjusting the length of the threads of the lining broaches of plush knitted fabric of lined weave. Regression equations are derived to determine the dependence of bulk density, breaking load (along the length and width) and the air permeability index of knitted fabric on technological factors. Mathematical models were built in Excel using regression equations. The research results make it possible to improve the quality and consumer properties of knitted products, and to select advanced production technologies for their production.
- 26 March 2024
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- Vol. 143 (1) , 203-210
Open AccessResearch of physical and mechanical properties of knitted fabrics of plush interlooping with reduced material consumption
The article discusses methods for manufacturing lined weave plush knitwear and ways to reduce the material intensity of knitted fabrics. The purpose of the study is to reduce the material consumption of products while maintaining operational, hygienic and aesthetic properties in the production of knitted fabrics. As a result of experimental work, the technological capabilities of the KН-323D flat knitting machine were studied and new types of lined weave plush knitwear were developed. Comparing the bulk density of plush knitwear with elongated lining broaches with the main base weave, it is clear that the presence of elongated lining broaches in the knitwear structure increases the thickness of the knitwear and reduces the bulk density. The breathability of a lined weave plush jersey is significantly less than that of a basic weave. It has been established that air permeability coefficients can be reduced to 33.1% (46.3-66.9 cm3/cm2∙sec) by adjusting the length of the threads of the lining broaches of plush knitted fabric of lined weave. Regression equations are derived to determine the dependence of bulk density, breaking load (along the length and width) and the air permeability index of knitted fabric on technological factors. Mathematical models were built in Excel using regression equations. The research results make it possible to improve the quality and consumer properties of knitted products, and to select advanced production technologies for their production.
- Open Access
- 22 December 2023
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- No. 4,p. 36-43
Study on the strength of needle-punched nonwoven material made on the basis of sole trader "Miras"
Coarse sheep wool and wastes from the production of woolen yarns are currently considered to be a special waste that requires large disposal costs due to low market demand. For this reason, wool has serious consequences for the environment. However, this type of raw material is considered a promising insulating natural fiber due to its thermal and acoustic properties. Moreover, wool meets the requirements of environmentally friendly materials that are used for yurts, insulation of buildings, and acoustic insulation for the automotive industry. Nevertheless, the sustainability and energy efficiency of insulation materials are currently evaluated comprehensively. In this context, the correctness of the composition of nonwoven fabric, its thickness and strength characteristics, as well as the number of layers play an important role. The purpose of this work is to study the relationship between strength characteristics and thickness, as well as the number of layers in nonwovens made of 100 % wool mixed with coarse and fine fibers, and to determine the most optimal variant of insulating nonwovens. 4 samples of one, two, three and four-layered materials were used in the study. The tested samples of insulating materials were evaluated according to the parameters of breaking load, strength and elongation. The results of the research showed that with an increase in the number of layers of material, there is an increase in the tested two indicators: breaking load and strength. The elongation rates were uneven. Consequently, by examining all three parameters, it was found that the best option is a three-layered nonwoven material.
- 22 December 2023
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- No. 4,p. 36-43
Open AccessStudy on the strength of needle-punched nonwoven material made on the basis of sole trader "Miras"
Coarse sheep wool and wastes from the production of woolen yarns are currently considered to be a special waste that requires large disposal costs due to low market demand. For this reason, wool has serious consequences for the environment. However, this type of raw material is considered a promising insulating natural fiber due to its thermal and acoustic properties. Moreover, wool meets the requirements of environmentally friendly materials that are used for yurts, insulation of buildings, and acoustic insulation for the automotive industry. Nevertheless, the sustainability and energy efficiency of insulation materials are currently evaluated comprehensively. In this context, the correctness of the composition of nonwoven fabric, its thickness and strength characteristics, as well as the number of layers play an important role. The purpose of this work is to study the relationship between strength characteristics and thickness, as well as the number of layers in nonwovens made of 100 % wool mixed with coarse and fine fibers, and to determine the most optimal variant of insulating nonwovens. 4 samples of one, two, three and four-layered materials were used in the study. The tested samples of insulating materials were evaluated according to the parameters of breaking load, strength and elongation. The results of the research showed that with an increase in the number of layers of material, there is an increase in the tested two indicators: breaking load and strength. The elongation rates were uneven. Consequently, by examining all three parameters, it was found that the best option is a three-layered nonwoven material.