Farkhad Tashmukhamedov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Farkhad Tashmukhamedov has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Bekzhan Abzalbekuly
Dulaty University
6 shared publications - Elvira Sarybayeva
M.Kh. Dulaty Taraz University
6 shared publications - Gulzat Oraz
Taraz University named after M.Kh. Dulaty
5 shared publications - Mukhamejan Shardarbek
M.Kh. Dulaty Taraz University
4 shared publications - Rakhimzhan Kauymbaev
M.Kh. Dulaty Taraz University
4 shared publications - Ersin Onem
Ege University
3 shared publications
Latest Publications
- 29 September 2026
- Published by Wiley in Coloration Technology
Plant‐based natural colorants for leather footwear: Dyeing performance, antibacterial activity and color fastness
Lining leather is a critical component in footwear requiring adequate mechanical performance, hygiene and durability. This study explores an eco‐friendly dyeing approach for sheepskin leather using plant‐based colorants derived from Calligonum aphyllum , oak bark and Rubia tinctorum . In response to the environmental impact of synthetic dyes in leather colorisation, natural alternatives were evaluated in terms of colorimetric, mechanical and antibacterial properties. The results showed that both individual and combined extracts produced a wide range of color shades while enhancing functional performance. Notably, the combination of Rubia tinctorum and oak bark exhibited superior tensile strength (29.4 MPa) and the highest color intensity ( K/S = 1.464). Whole dyed leathers demonstrated antibacterial activity, with Rubia tinctorum yielding the largest inhibition zone (up to 4 mm). The microscopic analysis of the cross‐sectional morphology of the dyed leather demonstrated that the penetration depth of the natural dyes ranged from 12% to 65% of the leather thickness. The dyed leather samples exhibited good dry rubbing fastness, with color fastness ratings ranging from 3/4 to 4/5 according to the grey scale, indicating satisfactory fixation of the natural colorants. This variation reflects differences in the diffusion behaviour and affinity of the plant‐based colorants towards the collagen matrix. These findings indicate that plant‐based dyes can improve both the structural integrity and hygienic performance of leather, highlighting their potential as sustainable alternatives in footwear lining applications.
- 29 September 2026
- Published by Wiley in Coloration Technology
Plant‐based natural colorants for leather footwear: Dyeing performance, antibacterial activity and color fastness
Lining leather is a critical component in footwear requiring adequate mechanical performance, hygiene and durability. This study explores an eco‐friendly dyeing approach for sheepskin leather using plant‐based colorants derived from Calligonum aphyllum , oak bark and Rubia tinctorum . In response to the environmental impact of synthetic dyes in leather colorisation, natural alternatives were evaluated in terms of colorimetric, mechanical and antibacterial properties. The results showed that both individual and combined extracts produced a wide range of color shades while enhancing functional performance. Notably, the combination of Rubia tinctorum and oak bark exhibited superior tensile strength (29.4 MPa) and the highest color intensity ( K/S = 1.464). Whole dyed leathers demonstrated antibacterial activity, with Rubia tinctorum yielding the largest inhibition zone (up to 4 mm). The microscopic analysis of the cross‐sectional morphology of the dyed leather demonstrated that the penetration depth of the natural dyes ranged from 12% to 65% of the leather thickness. The dyed leather samples exhibited good dry rubbing fastness, with color fastness ratings ranging from 3/4 to 4/5 according to the grey scale, indicating satisfactory fixation of the natural colorants. This variation reflects differences in the diffusion behaviour and affinity of the plant‐based colorants towards the collagen matrix. These findings indicate that plant‐based dyes can improve both the structural integrity and hygienic performance of leather, highlighting their potential as sustainable alternatives in footwear lining applications.
- Open Access
- 14 July 2026
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 23 (1)
Influence of Biocidal Treatment on Antimicrobial Performance and Mechanical Behavior of Wool Nonwovens
- 14 July 2026
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 23 (1)
Open AccessInfluence of Biocidal Treatment on Antimicrobial Performance and Mechanical Behavior of Wool Nonwovens
- 30 June 2026
- Published by Dulaty University in Mechanics and Technologies
- No. 2,p. 245-254
INTEGRATED STRUCTURAL AND CHEMICAL ANALYSIS OF YARN FOR COMPRESSION KNITWEAR FOR THERAPEUTIC PURPOSES
This paper presents a comprehensive assessment of the structural, chemical, and physical-mechanical characteristics of yarn intended for the production of therapeutic and prophylactic compression knitwear. Samples of natural, blended and elastomeric yarns of various fibre compositions (cashmere, wool, cotton, acrylic, polyurethane) were studied.Microscopic analysis allowed the morphological features of the fibres to be established and their nature to be confirmed. The FTIR-ATR method provided molecular identification of protein, cellulose and synthetic components. The assessment of the physical and mechanical properties revealed the differentiated behaviour of the yarn under tension and determined its ability to form a stable elastic system in the structureof compression knitwear.It was established that blended systems based on wool and acrylic provide an optimal combination of strength and elasticity, while elastane yarn plays a key role in forming a stable compression effect. The results obtained form a scientifically sound basis for the selection of yarn in the development of medical knitwear.
- 30 June 2026
- Published by Dulaty University in Mechanics and Technologies
- No. 2,p. 245-254
INTEGRATED STRUCTURAL AND CHEMICAL ANALYSIS OF YARN FOR COMPRESSION KNITWEAR FOR THERAPEUTIC PURPOSES
This paper presents a comprehensive assessment of the structural, chemical, and physical-mechanical characteristics of yarn intended for the production of therapeutic and prophylactic compression knitwear. Samples of natural, blended and elastomeric yarns of various fibre compositions (cashmere, wool, cotton, acrylic, polyurethane) were studied.Microscopic analysis allowed the morphological features of the fibres to be established and their nature to be confirmed. The FTIR-ATR method provided molecular identification of protein, cellulose and synthetic components. The assessment of the physical and mechanical properties revealed the differentiated behaviour of the yarn under tension and determined its ability to form a stable elastic system in the structureof compression knitwear.It was established that blended systems based on wool and acrylic provide an optimal combination of strength and elasticity, while elastane yarn plays a key role in forming a stable compression effect. The results obtained form a scientifically sound basis for the selection of yarn in the development of medical knitwear.
- 25 December 2025
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- Vol. 150 (4)
Microscopic analysis of the structures of textile materials dyed with natural dyes
This work is devoted to the study of the problem of environmental pollution caused by the use of synthetic dyes in the textile industry, and offers a solution in the form of using natural dyes of plant origin. Synthetic dyes, despite their cheapness and stability, cause significant harm to the environment and human health. In this regard, the aim of the study is to develop technologies for dyeing textile materials using extracts of natural dyes obtained from local plant materials.The scientific significance of the study lies in the in-depth analysis of the effect of natural dyes on the properties of textile materials and in the proposal of environmentally friendly technologies for their processing. The practical significance of the work lies in the possibility of developing innovative dyeing methods that can reduce environmental pollution and ensure the resistance of fabric to washing and wear.The research methodology includes the use of a field emission scanning electron microscope with an X-ray spectral microanalyzer to study the morphology of the fabric surface and the elemental composition of fibers before and after dyeing with natural dyes with mordant. The main results show that adding mordant to extracts improves color saturation and fastness, and also improves the physical and mechanical properties of fabrics. The study revealed changes in the chemical composition of fibers, such as an increase in the content of aluminum, potassium and titanium, which confirms the effectiveness of the technologies used.The value of the study lies in promoting the concept of sustainable and environmentally friendly production in the textile industry, as well as in proposing new dyeing methods that can significantly reduce the environmental burden. The practical significance of the work is to develop a technological basis for the production of environmentally friendly textiles that can be used in various areas of the light industry.
- 25 December 2025
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- Vol. 150 (4)
Microscopic analysis of the structures of textile materials dyed with natural dyes
This work is devoted to the study of the problem of environmental pollution caused by the use of synthetic dyes in the textile industry, and offers a solution in the form of using natural dyes of plant origin. Synthetic dyes, despite their cheapness and stability, cause significant harm to the environment and human health. In this regard, the aim of the study is to develop technologies for dyeing textile materials using extracts of natural dyes obtained from local plant materials.The scientific significance of the study lies in the in-depth analysis of the effect of natural dyes on the properties of textile materials and in the proposal of environmentally friendly technologies for their processing. The practical significance of the work lies in the possibility of developing innovative dyeing methods that can reduce environmental pollution and ensure the resistance of fabric to washing and wear.The research methodology includes the use of a field emission scanning electron microscope with an X-ray spectral microanalyzer to study the morphology of the fabric surface and the elemental composition of fibers before and after dyeing with natural dyes with mordant. The main results show that adding mordant to extracts improves color saturation and fastness, and also improves the physical and mechanical properties of fabrics. The study revealed changes in the chemical composition of fibers, such as an increase in the content of aluminum, potassium and titanium, which confirms the effectiveness of the technologies used.The value of the study lies in promoting the concept of sustainable and environmentally friendly production in the textile industry, as well as in proposing new dyeing methods that can significantly reduce the environmental burden. The practical significance of the work is to develop a technological basis for the production of environmentally friendly textiles that can be used in various areas of the light industry.
- Open Access
- 27 October 2025
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 22 (1)
Optimization of Warmth Retention in Nonwoven Materials Made from Coarse and Semi-Coarse Sheep Wool
- 27 October 2025
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 22 (1)
Open AccessOptimization of Warmth Retention in Nonwoven Materials Made from Coarse and Semi-Coarse Sheep Wool
- Open Access
- 5 October 2025
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 22 (1)
Calligonum aphyllum extract as sustainable colorant for fabric treatment
- 5 October 2025
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 22 (1)
Open AccessCalligonum aphyllum extract as sustainable colorant for fabric treatment
- 30 September 2024
- Published by Dulaty University in Mechanics and Technologies
- No. 3,p. 399-405
ANALYSIS OF PRODUCTION AND PROPERTIES OF NONWOVENS: GLOBAL TRENDS AND DEVELOPMENT IN KAZAKHSTAN
Nonwovens are versatile textile materials with low cost of production and unique properties. The production of nonwovens is a growing industry that needs the development of technology, equipment, raw materials and properties for optimal utilisation. The purpose of this article is to analyse the global nonwovens market and the state of the nonwovens market in Kazakhstan, as well as the factors influencing the properties of finished nonwovens. To achieve this goal, the article uses such research methods as literature review, case studies.
- 30 September 2024
- Published by Dulaty University in Mechanics and Technologies
- No. 3,p. 399-405
ANALYSIS OF PRODUCTION AND PROPERTIES OF NONWOVENS: GLOBAL TRENDS AND DEVELOPMENT IN KAZAKHSTAN
Nonwovens are versatile textile materials with low cost of production and unique properties. The production of nonwovens is a growing industry that needs the development of technology, equipment, raw materials and properties for optimal utilisation. The purpose of this article is to analyse the global nonwovens market and the state of the nonwovens market in Kazakhstan, as well as the factors influencing the properties of finished nonwovens. To achieve this goal, the article uses such research methods as literature review, case studies.