WPWenjun Peng

Wenjun Peng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wenjun Peng has a total of 68 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Supramolecular Assembly‐Driven Photofluorochromism Enables Time‐Encoded Transient Encryption

    by Haochen Ni, Baoyi Wu, Gaopeng Wang, Wenjun Peng, Si Yu Zheng, Jintao Yang

    Stimuli‐responsive luminescent materials offer dynamic optical outputs for advanced information security, yet achieving programmable fluorescence color evolution in water using a single optical input remains challenging. We developed a water‐soluble zwitterionic monomer, 2‐(pent‐4‐en‐1‐yl)isoquinolin‐2‐ium‐5‐sulfonate (IQIS), that exhibits pronounced photofluorochromism under ultraviolet (UV) irradiation. Its fluorescence evolves from blue to green, accompanied by an increase in the overall fluorescence quantum yield from 3.5% to 17.3%. Mechanistic studies reveal that IQIS is weakly pre‐associated in water, while UV irradiation promotes the growth, densification, and packing reorganization of these loose molecular clusters. The resulting long‐wavelength emission exhibits distinct aggregation‐dependent photophysical characteristics and is consistent with an aggregate‐associated excited state with enhanced intermolecular charge‐transfer character. By programming the kinetics of this supramolecular reorganization in different polymeric architectures, high‐resolution grayscale patterns with time‐evolving optical outputs can be generated. Under continuous UV irradiation, the same light used for fluorescence readout simultaneously drives the optical evolution, causing initially visible information to progressively fade and ultimately disappear without an additional stimulus. This single‐input, self‐evolving behavior enables a “Snapchat‐like” transient encryption mode and provides a strategy for spatiotemporal information encoding based on kinetically programmed supramolecular photofluorochromism.

  • Photo-Modulated Acylhydrazone Covalent Adaptable Networks with Switchable Creep Resistance and Reprocessability

    by Youbing Li, Yunsheng Xu, Wenjun Peng, Xianming Zhang, Pengwu Xu, Weijun Yang, Minna Hakkarainen

    Covalent adaptable networks (CANs) enable reprocessability through dynamic bond exchange, yet suppressing exchange to improve creep resistance often compromises processability, creating a persistent trade-off between service stability and recycling efficiency. Here, photo-modulated acylhydrazone CANs are reported in which E/Z photoisomerization acts as a molecular kinetic gate and modulates the thermomechanical response of the crosslinked network, thereby enabling switchable creep resistance and thermal reprocessability within the same network. UV–Vis spectroscopy confirmed reversible switching under UV (310 nm) and visible light (405 nm). Model compound studies quantified a pronounced configurational dependence of acylhydrazone exchange, with a Z-enriched state exhibiting markedly faster exchange than the E form, while density functional theory suggested stronger intermolecular association for the E configuration. When embedded into crosslinked networks, this molecular switching translated into light-history-dependent modulation of segmental dynamics and thermal transitions. In a representative network, Tg decreased from 137.4 to 106.6 °C after UV irradiation and increased to 147.6 °C after visible-light treatment. Visible-light treatment further delayed the onset of pronounced irreversible deformation from approximately 130 to 140 °C, whereas UV pretreatment enabled successful forming under a stringent processing window of 110 °C and 6 min. Overall, light irradiation enabled history-dependent regulation of creep resistance and thermal reprocessability by modulating the configurational and thermomechanical state of the network.

  • Open Access

    Powder-to-Hydrogel System with Fast Water Absorption for Evaporative Cooling

    by Lebin Shang, Jiayao Xu, Wenjun Peng, Jiayun Yu, Xiao Zeng, Jintao Cai, Chujun Ni, Qian Zhao

    Water-based evaporative cooling plays an important role in industrial thermal management. Porous hydrogels, which retain water within interconnected channels to serve as reservoirs for continuous evaporation, are promising materials for water-efficient cooling. However, compatibility between in situ formation and fast water absorption of the material as a coating remains a challenge. Here, we report a powder-to-hydrogel system enabling in situ formation of superhydrophilic porous hydrogel coating in a facile manner. An ionic polymer providing phenylboronic acid was introduced into a poly(vinyl alcohol) (PVA) and tannic acid (TA) powder system. Upon hydration, the powders rapidly converted into a hydrogel coating, where the ionic polymer was chemically anchored to the PVA-TA network via the formation of boronate ester bonds. This structural integration can drastically double the water uptake speeds and the overall water absorption capacity compared to pristine PVA-TA. Consequently, in a simulated solar panel cooling experiment with intermittent spraying, this coating successfully suppressed the temperature rise by over 48% compared to that of conventional strategies. Featuring large water capacity and rapid replenishment, this powder-based coating offers significant advantages for superior, long-lasting industrial cooling.


  • Green Interfacial Engineering via Carbon Dot Grafting for Strong and Aging-Resistant Fiber–Elastomer Interfaces

    by Dejiong Zhao, Chengfeng Zhang, Wenjing Zhou, Haixin Yang, Siwu Wu, Shu Wang, Wenjun Peng, Kang Chen, Zhenghai Tang, Xianming Zhang, et al.

    Fiber-reinforced elastomer composites are indispensable structural materials for transportation and industrial applications, yet their performance is fundamentally limited by inefficient stress transfer across fiber-elastomer interfaces and the lack of efficient and sustainable interfacial engineering approaches. Herein, we report a green interfacial engineering strategy based on carbon dot (CD) grafting to regulate surface chemistry and morphology of polyethylene terephthalate fibers. A microwave-assisted reaction simultaneously generates and covalently anchors CDs onto the fiber surface, constructing functionalized and roughened surfaces. Experimental results combined with theoretical calculations reveal the molecular interactions between CD-derived functional groups and the impregnation layer, elucidating the mechanism of interfacial reinforcement. The engineered interface enables more efficient stress transfer and markedly enhanced interfacial adhesion while retaining the radical-scavenging capability of CDs, which improves thermo-oxidative aging resistance. By integrating CD-grafted fibers with an eco-friendly impregnation system, the composites achieve markedly enhanced interfacial performance, with a 137% higher peel strength compared with unmodified fibers, highlighting the effectiveness of CD grafting for green processing. This work establishes an efficient interfacial engineering strategy for fiber-reinforced elastomer composites, offering both mechanistic understanding and practical guidance for designing durable and sustainable fiber-elastomer interfaces.


  • Tuning Acylhydrazone Exchange Dynamics via Substituent Effects for Reprocessable and High-Resolution 3D Printable CANs

    by Youbing Li, Chonglin Liu, Yunsheng Xu, Shuangfei Xiang, Wenjun Peng, Xianming Zhang, Minna Hakkarainen, Pengwu Xu, Weijun Yang, Piming Ma


  • Kaleidoscopic stress-colored birefringent metamaterial for digital multiplexed encryption

    by Xin Liang, Hanxin Xia, Wenjun Peng, Xianming Zhang, Yaoguang Ma, Qian Zhao, Tao Xie


  • Open Access

    Stress-engineered ultra-broadband spectrometers

    by Gongyuan Zhang, Tom Albrow-Owen, Wenjun Peng, Xin Liang, Xianming Zhang, Pan Wang, Dawei Di, Shurong Dong, Jikui Luo, Guo Wang, et al.

    The evolution of miniaturized spectroscopic tools is pivotal for expanding the application of spectral data across scientific, industrial, and consumer domains. Recent advancements in computationally augmented systems have dramatically reduced device form factors toward those compatible with consumer tech integration. However, for a commercial reality, most applications demand operation across visible to short-wave infrared (SWIR) range. In this regard, existing miniaturized devices are either constrained by physical properties; use complex, costly, or unscalable fabrication techniques; or require multiple components to address separate parts of the spectrum. Here, we report on a low-cost, visible to SWIR, miniaturized spectrometer design enabled by a mass-producible, nonlithographic method of engineering planar dispersive elements from widely available plastics. By deforming shape memory epoxies, we encode spectral information, which is processed by a complementary metal oxide semiconductor sensor array and reconstructed via algorithms. This design offers broadband capability from 400 to 1600 nanometers and enables line-scanning spectral imaging, paving the way for affordable spectrometers.


  • Controlled Synthesis of (Ni, Co) Bimetallic Selenide Composites Supported on Carbon Cloth and Their Application in Supercapacitors

    by Dalai Jin, Wenting Yang, Jiamin Zhou, Yufeng Jiao, Linlin Ren, Qingqing Feng, Wenjun Peng, Zhaojun Min


  • Open Access

    Pluralizing actuation behavior of 3D printable liquid crystal elastomers via polymerization sequence control

    by Wenjun Peng, Pengxin Zhao, Xiaorui Zhou, Xin Liang, Xianming Zhang, Binjie Jin, Guancong Chen, Qian Zhao, Tao Xie

    Mechanical stretching is commonly used for mesogen alignment which is essential for the muscle-like actuations of liquid crystal elastomers (LCEs). Despite the simplicity of the method, the mesogens are typically aligned in the stretching direction, limiting exclusively the LCE to an actuation mode of cooling-induced elongation. Here, we design an interpenetrating double network consisting of an LCE network and an elastomer network, with one polymerized network stretched before the polymerization of the other network. Depending on the polymerization sequence of the two networks, the double network shows two opposite actuation modes, namely, the conventional cooling-induced elongation or an unusual cooling-induced contraction. Strategic integration of the two opposite behaviors into the same LCE leads to sophisticated actuation difficult to achieve with a conventional LCE design. Coupled with 3D printing, geometrically complexed LCEs with diverse multimodal four-dimensional actuation behaviors are illustrated. Our work expands the design scope of LCE actuators and their potential device applications.