YCYe. G. Chernyshenko

Ye. G. Chernyshenko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ye. G. Chernyshenko has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Improving the Traction Properties of the Shunting Diesel Locomotives ChME3 by Distributing the Traction Force Between the Axles of the Diesel Locomotive

    by Ye. S. Riabov, B. Kh. Yeritsyan, Ye. V. Lysenko, Ye. G. Chernyshenko, A. Yu. Zhukov

    Purpose. Research into the specific determination of the influence of redistribution of traction force between axles on increasing the traction properties of the ChME3 diesel locomotive. Methodology. A mathematical model has been developed to determine the coefficient of utilization of the coupling mass of the ChME3 diesel locomotive when redistributing the tractive effort between the axles of the diesel locomotive. It is shown that as a result of the action of forces in the gear meshing of traction reducers and the action of the traction force on the automatic coupling, the unloading of the first, second, and fourth axles and the loading of the third, fifth, and sixth axles occurs in the direction of movement of the locomotive. Finding. Calculations of the coefficient of utilization of the traction mass of a diesel locomotive were carried out at different values of the coefficient of coupling and different schemes of power supply of traction electric motors. It was determined that the highest values of the coefficient of utilization of the traction mass of a locomotive are achieved in the case of individual power supply and control of traction electric motors. This method of power supply allows for the most accurate consideration of the actual axle load when redistributing the tractive effort between the axles of the locomotive. With group power supply of traction motors, in the case of combining axles with close axle coupling mass utilization coefficients, almost full utilization of coupling mass is also achieved. At the same time, the value of the coefficient of utilization of the traction mass of the diesel locomotive is stable and practically does not depend on the traction force. With by-bogie power supply and group power supply of all electric motors, the coupling mass utilization coefficient varies in the range of 0.8…0.87, with lower values being achieved at higher traction force of the diesel locomotive. Originality. The possibility of increasing the traction properties of the ChME3 diesel locomotive by redistributing traction forces between the axles of the diesel locomotive, taking into account the redistribution of the actual axle load, is substantiated. Rational options for power supply schemes for traction electric motors have been identified, which ensure a high utilization factor of the traction mass of the diesel locomotive. Practical value. The results obtained can be used in the modernization of ChME3 diesel locomotives, which allows to increase their traction properties. The proposed approach to improving traction properties can be applied to other traction rolling stock.

  • Open Access

    Analysis of shunting locomotive operating modes when performing traction tasks

    by I. Kostenko, I. Bilokon, Y. Lysenko, Y. Chernyshenko, I. Riabov

    The paper considers the modes of operation of shunting diesel locomotives ČME3 when performing traction tasks at the service areas of the locomotive depot Koziatyn. A mathematical model of train movement with a ČME3 diesel locomotive has been developed, which has been used to solve a series of traction problems. It was found that the operating modes of a diesel engine are most influenced by the profile of the track section. It is determined that when moving from the Koziatyn station, the relative duration of the traction mode is 14...39% of the total movement time. When moving in the direction of the Koziatyn station, the relative duration of the traction mode is 28...90%. In the traction mode, the diesel engine operates at rated power. For the examined sections of the movement, we evaluated the diesel fuel consumption for a serial diesel locomotive, a diesel locomotive with a modern diesel engine, and a battery locomotive charged from an onboard diesel generator set. It has been determined that a diesel locomotive with a modern diesel engine consumes 18...22% less fuel than a standard diesel locomotive. In the case of a battery locomotive, fuel consumption can be either lower or higher compared to a diesel locomotive with a modern diesel engine. At the same time, the accumulation of energy in the onboard energy storage device during electrodynamic braking and its use in traction modes helps to reduce fuel consumption.