AAAmirhossein Azarbahram

Amirhossein Azarbahram

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Amirhossein Azarbahram has a total of 45 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Bat Algorithm-Based Energy Beamforming for Wireless Power Transfer With Dynamic Metasurface Antennas

    by Ricardo Souza Senandes, Glauber Brante, Richard Demo Souza, Amirhossein Azarbahram, Onel Luis Alcaraz López

    This paper investigates the problem of energy beamforming for wireless power transfer (WPT) using dynamic metasurface antennas (DMAs).We propose a novel solution based on the bat algorithm (BA) to efficiently optimize the beamforming process. The proposed BA-based scheme enables simultaneous charging of multiple devices while avoiding power transmission in specific directions, such as areas where people or animals may be present. Our approach provides a robust and computationally efficient solution, considering key system constraints, including power transfer efficiency, antenna configurations, and DMA characteristics. Simulation results demonstrate that the BA-based method outperforms existing techniques in the literature, particularly those relying on alternating optimization, by achieving lower total power consumption and reduced computational complexity. These findings highlight the potential of the proposed method as a promising solution for future WPT systems employing DMAs.


  • Open Access

    Power from Space: Coordinated Satellite Charging for Off-Grid Wireless Systems

    by Osmel M. Rosabal, Amirhossein Azarbahram, Mateen Ashraf, Mohammad Shehab, Abdul Basit Khattak, Onel L. A. Lopez, Mohamed-Slim Alouini

  • Open Access

    A Survey on Ambient IoT: Use Cases, Standardization, Enabling Technologies, and Research Directions

    by Jeroen Famaey, Onel L. A. Lopez, Ruben Altuna Perez, Gilles Callebaut, Lieven De Strycker, Efstathios Katranaras, Jingyi Liao, Ritesh Kumar Singh, Mateen Ashraf, Amirhossein Azarbahram, et al.


  • Open Access

    Beamforming and Waveform Optimization for RF Wireless Power Transfer With Beyond Diagonal Reconfigurable Intelligent Surfaces

    by Amirhossein Azarbahram, Onel L. A. López, Bruno Clerckx, Marco Di Renzo, Matti Latva-Aho

    Radio frequency (RF) wireless power transfer (WPT) is a promising technology to seamlessly charge low-power devices, but its low end-to-end power transfer efficiency remains a critical challenge. To address the latter, low-cost transmit/radiating architectures, e.g., based on reconfigurable intelligent surfaces (RISs), have shown great potential. Beyond diagonal (BD) RIS is a novel branch of RIS offering enhanced performance over traditional diagonal RIS (D-RIS) in wireless communications, but its potential gains in RF-WPT remain unexplored. Motivated by this, we analyze a BD-RIS-assisted single-antenna RF-WPT system to charge a single rectifier, and formulate a joint beamforming and multi-carrier waveform optimization problem aiming to maximize the harvested power. We propose two solutions relying on semi-definite programming for fully connected BD-RIS, a successive convex approximation (SCA)-based beamforming approach, and an efficient low-complexity iterative method relying on SCA. Numerical results show that the proposed algorithms converge and that adding transmit sub-carriers or RIS elements improves the harvesting performance. We show that the transmit power budget impacts the relative power allocation among different sub-carriers depending on the rectifier’s operating regime, while BD-RIS shapes the cascade channel differently for frequency-selective and flat scenarios. Finally, we verify by simulation that BD-RIS and D-RIS achieve the same performance under pure far-field line-of-sight conditions (in the absence of mutual coupling). Meanwhile, BD-RIS outperforms D-RIS as the non-line-of-sight components of the channel become dominant.


  • Open Access

    End-to-End Joint Waveform and Beamforming Optimization for RF Wireless Power Transfer With Hybrid Transmit Architecture and Nonlinear Energy Harvesters

    by Abdul Basit Khattak, Amirhossein Azarbahram, Deepak Kumar, Matti Latva-Aho, Onel L. A. López

    Radio frequency (RF) wireless power transfer (WPT) is an appealing technology to provide sustainable and cost-efficent power supply to low-power devices in future wireless systems. However, the inherently low end-to-end power transfer efficiency (PTE) is a serious challenge for practical applications. The key contributing factors include channel losses, transceivers’ power consumption, and losses from components such as the digital-to-analog converter (DAC), high-power amplifier (HPA), and rectenna. Careful consideration of these factors is essential for optimizing PTE, which is the focus of this research. Herein, we consider a fully connected hybrid multi-antenna transmit architecture that aims to charge non-linear energy harvesters. First, we present a mathematical framework to determine the harvested power from multi-tone signal transmissions and the system’s power consumption. Then, we formulate a joint waveform and analog beamforming design problem to minimize system’s power consumption and fulfill user’s charging needs. With this in place, and due to the problem high-complexity, we propose a particle swarm optimization (PSO)-based solution. Moreover, we also model the problem as a Markov decision process and propose a solution based on deep deterministic policy gradient (DDPG). Numerical results demonstrate that the proposed algorithms converge to suboptimal solutions. Moreover, simulation results show that system power consumption reduces with lower DAC and phase shifter resolution, as well as increased antenna length. Conversely, power consumption rises with the number of users and RF chains. Notably, across all these scenarios, PSO-JWB outperforms DDPG-JWB, requiring lower overall system power consumption.


  • Open Access

    Waveform Optimization and Beam Focusing for Near-Field Wireless Power Transfer With Dynamic Metasurface Antennas and Non-Linear Energy Harvesters

    by Amirhossein Azarbahram, Onel L. A. López, Matti Latva-Aho

    Radio frequency (RF) wireless power transfer (WPT) is a promising technology for future wireless systems. However, the low power transfer efficiency (PTE) is a critical challenge for practical implementations. One of the main inefficiency sources is the power consumption and loss introduced by key components such as high-power amplifier (HPA) and rectenna, thus they must be carefully considered for PTE optimization. Herein, we consider a near-field RF-WPT system with a dynamic metasurface antenna (DMA) at the transmitter and non-linear energy harvesters. We provide a mathematical framework to calculate the power consumption and harvested power from multi-tone signal transmissions. Based on this, we propose an approach relying on alternating optimization and successive convex approximation for waveform optimization and beam focusing to minimize power consumption while meeting energy harvesting requirements. Numerical results show that increasing the number of transmit tones reduces the power consumption by leveraging the rectifier’s non-linearity more efficiently. Moreover, they demonstrate that increasing the antenna length improves the performance, while DMA outperforms fully-digital architecture in terms of power consumption. Finally, our results verify that the transmitter focuses the energy on receivers located in the near-field, while energy beams are formed in the receivers’ direction in the far-field region.


  • Open Access

    Energy-Autonomous Roadside Nodes in V2I Using RF Energy Harvesting

    by Jose Manuel Gimenez-Guzman, Israel Leyva-Mayorga, Amirhossein Azarbahram, Onel Alcaraz López, Petar Popovski

    Future intelligent transportation systems will require complex networking infrastructures with communication among a huge number of vehicles and roadside nodes to support services such as autonomous driving. However, the deployment and operation of such a large number of roadside nodes is expensive due to either the cost of battery replacement or the maintenance of a continuous energy supply in long highways or rural areas. In this work, we evaluate the feasibility of a roadside unit harvesting energy from radio frequency (RF) signals transmitted by a nearby moving vehicle, with the incentive of using a part of the harvested energy to transmit small amounts of data to the vehicle. We consider a realistic model with the timing elements related to the movement of the vehicle, beam tracking errors, a non-linear model for energy harvesting, and potential line-of-sight obstructions in multi-vehicle scenarios. Results show that, with typical off-the-shelf components, it is feasible to use the RF harvested energy to transmit between a few hundred and several thousand bytes, depending on the speed of vehicles and the frequency of operation for energy harvesting, among other parameters.


  • Open Access

    Energy Beamforming for RF Wireless Power Transfer With Dynamic Metasurface Antennas

    by Amirhossein Azarbahram, Onel L. A. López, Richard D. Souza, Rui Zhang, Matti Latva-Aho

    Radio frequency (RF) wireless power transfer (WPT) is a promising technology for charging the Internet of Things. Practical RF-WPT systems usually require energy beamforming (EB), which can compensate for the severe propagation loss by directing beams toward the devices. The EB flexibility depends on the transmitter architecture, existing a trade-off between cost/complexity and degrees of freedom. Thus, simpler architectures such as dynamic metasurface antennas (DMAs) are gaining attention. Herein, we consider an RF-WPT system with a transmit DMA for meeting the energy harvesting requirements of multiple devices and formulate an optimization problem for the minimum-power design. First, we provide a mathematical model to capture the frequency-dependant signal propagation effect in the DMA architecture. Next, we propose a solution based on semi-definite programming and alternating optimization. Results show that a DMA-based structure can outperform a fully-digital implementation and that the required transmit power decreases with the antenna array size, while it increases and remains almost constant with frequency in DMA and FD, respectively.