Mohamed Qenawy
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mohamed Qenawy has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Bin Chen
State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University, Xi’an, China
5 shared publications - Jiameng Tian
School of Energy and Power Engineering, Jiangsu University 1 , Zhenjiang, Jiangsu 212013
4 shared publications Junfeng Wang
4 shared publicationsKai Yu
4 shared publicationsMona Ali
4 shared publicationsYuchen Zhu
4 shared publications
Latest Publications
- 10 January 2026
- Published by Elsevier in Next Research
- Vol. 5
Spatio-temporal dynamics and intermittency of heliostat cosine efficiency in solar power tower plants
- 10 January 2026
- Published by Elsevier in Next Research
- Vol. 5
Spatio-temporal dynamics and intermittency of heliostat cosine efficiency in solar power tower plants
Thermal‐Gradient‐Driven Hydrovoltaic Nanogenerators: Opportunities and Challenges for Advanced Energy Conversion
The global energy crisis necessitates innovative approaches to harness ambient low‐grade energy. Hydrovoltaic technology, which generates electricity from water‐ nanomaterial interaction, is promising but limited by low power density and environmental intermittency. While previous reviews have focused on materials and isolated mechanisms, this review pioneers a comprehensive analysis of a strategic solution: the active integration of thermal gradients to govern and enhance hydrovoltaic phenomena. We systematically dissect the fundamental synergistic mechanisms—such as thermal‐osmosis and evaporation‐driven potential—that underpin this coupling. The review critically evaluates key advancements in material innovations (e.g., phase‐engineered 2D materials, functionalized carbon, hydrogels) and structural designs (e.g., 3D porous and asymmetric architectures) essential for optimizing thermal‐hydrovoltaic performance. Furthermore, we chart the expanded application landscape, from wearable electronics and self‐powered sensors to dual‐purpose electricity and freshwater production systems. Finally, we confront persistent challenges in material stability, scalability, and system integration, outlining a forward‐looking research roadmap focused on multi‐physics modeling and intelligent power management. This work also identifies the underexplored potential of high thermal gradients as a critical future direction. By transcending single‐source energy harvesting, integrated thermal‐gradient‐driven hydrovoltaics represents a transformative paradigm for sustainable, distributed power generation.
Thermal‐Gradient‐Driven Hydrovoltaic Nanogenerators: Opportunities and Challenges for Advanced Energy Conversion
The global energy crisis necessitates innovative approaches to harness ambient low‐grade energy. Hydrovoltaic technology, which generates electricity from water‐ nanomaterial interaction, is promising but limited by low power density and environmental intermittency. While previous reviews have focused on materials and isolated mechanisms, this review pioneers a comprehensive analysis of a strategic solution: the active integration of thermal gradients to govern and enhance hydrovoltaic phenomena. We systematically dissect the fundamental synergistic mechanisms—such as thermal‐osmosis and evaporation‐driven potential—that underpin this coupling. The review critically evaluates key advancements in material innovations (e.g., phase‐engineered 2D materials, functionalized carbon, hydrogels) and structural designs (e.g., 3D porous and asymmetric architectures) essential for optimizing thermal‐hydrovoltaic performance. Furthermore, we chart the expanded application landscape, from wearable electronics and self‐powered sensors to dual‐purpose electricity and freshwater production systems. Finally, we confront persistent challenges in material stability, scalability, and system integration, outlining a forward‐looking research roadmap focused on multi‐physics modeling and intelligent power management. This work also identifies the underexplored potential of high thermal gradients as a critical future direction. By transcending single‐source energy harvesting, integrated thermal‐gradient‐driven hydrovoltaics represents a transformative paradigm for sustainable, distributed power generation.
- 24 November 2025
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 256
Experimental investigation of novel pulse spray flash evaporation for efficient dynamic heat dissipation
- 24 November 2025
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 256
Experimental investigation of novel pulse spray flash evaporation for efficient dynamic heat dissipation
- 20 November 2025
- Published by Elsevier in Applied Thermal Engineering
- Vol. 284
Spatio-temporal variation of spray flash evaporation and its impact on surface heat transfer
- 20 November 2025
- Published by Elsevier in Applied Thermal Engineering
- Vol. 284
Spatio-temporal variation of spray flash evaporation and its impact on surface heat transfer
- Open Access
- 1 April 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (4)
Improving fluid flow and heat transfer of cryogen spray cooling using sweeping cold air jet
Industrial growth has led to increased electronic component integration, resulting in higher working temperatures and technological failures. Cryogen spray cooling (CSC) could reach cryogenic temperatures with fast-responding, but its heat transfer limitation due to liquid film deposition is potentially challenging. In this study, CSC cooling is incorporated with either a cold air jet (CAJ) or a sweeping jet (SWJ) to enhance heat and fluid flow. A K-type thermocouple is used for measuring the surface temperature, while the improved Duhamel theorem is used to estimate the heat flux. The spray and film intensities are recorded through the Mie-scattering methodology via high-speed camera. The results demonstrated that the CAJ/SWJ exhibited a significant reduction in surface temperature and film intensity, enhanced heat dissipation and spray efficiency compared to CSC cooling. More precisely, it demonstrated a 26%–36% heat transfer coefficient improvement, along with a 52% increase in the corresponding time of the critical heat flux. Meanwhile, the CAJ/SWJ intensifies heat transfer during film and transition boiling, inspired by the fast liquid film evaporations. In contrast, the SWJ is much preferred due to its wider and stable coolant coverage throughout film evaporation, as seen by its greater heat transfer coefficient. The combined results demonstrated the need to promptly eliminate the deposited film, as it holds the potential to serve as a pivotal resolution for the advancement of thermal management technology.
- 1 April 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (4)
Open AccessImproving fluid flow and heat transfer of cryogen spray cooling using sweeping cold air jet
Industrial growth has led to increased electronic component integration, resulting in higher working temperatures and technological failures. Cryogen spray cooling (CSC) could reach cryogenic temperatures with fast-responding, but its heat transfer limitation due to liquid film deposition is potentially challenging. In this study, CSC cooling is incorporated with either a cold air jet (CAJ) or a sweeping jet (SWJ) to enhance heat and fluid flow. A K-type thermocouple is used for measuring the surface temperature, while the improved Duhamel theorem is used to estimate the heat flux. The spray and film intensities are recorded through the Mie-scattering methodology via high-speed camera. The results demonstrated that the CAJ/SWJ exhibited a significant reduction in surface temperature and film intensity, enhanced heat dissipation and spray efficiency compared to CSC cooling. More precisely, it demonstrated a 26%–36% heat transfer coefficient improvement, along with a 52% increase in the corresponding time of the critical heat flux. Meanwhile, the CAJ/SWJ intensifies heat transfer during film and transition boiling, inspired by the fast liquid film evaporations. In contrast, the SWJ is much preferred due to its wider and stable coolant coverage throughout film evaporation, as seen by its greater heat transfer coefficient. The combined results demonstrated the need to promptly eliminate the deposited film, as it holds the potential to serve as a pivotal resolution for the advancement of thermal management technology.
- Open Access
- 1 February 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (2)
Intermittent cryogen spray cooling coupled with cold air jet for heat transfer enhancement and cryogen saving of laser dermatology
Laser dermatology has become a convenient technique for medical treatment. However, the epidermal temperature could be increased, leading to intolerable side effects. Cryogen spray cooling (CSC) is implemented to decrease epidermal damage, but the current CSC could increase cryogen wastage. In this study, the CSC is coupled with a cold air jet (CAJ) and is further subjected to intermittent strategy (ICSC) to mitigate film deposition, enhance heat transfer, and save cryogen consumption, through CAJ-to-spray interaction. The surface temperature is measured by a thin film type-T thermocouple, while the heat transfer is estimated by enhanced Duhamel theorem. The film intensity is captured by a digital single-lens reflex camera through the scattering-illumination technique. The results affirmed the benefits of using ICSC/ICSC-CAJ for laser dermatology. It demonstrated lower surface temperature, film intensity, and film resistance as well as higher convection and efficiency compared with CSC. ICSC-CAJ showed the lowest minimum temperature (1.8%–4.9% decrement) and film resistance (3.8%–17.5% decrement), the highest average convective coefficient (84%–92% increment) and efficiency (7%–9% increment) compared with ICSC. Lower frequency and moderate duties would be preferable for ICSC, while higher frequency and lower duties would be preferable for ICSC-CAJ. The efficiency increased with the saving (110% increment), which insights into our understanding of alternative enhancement toward cryogen saving strategy.
- 1 February 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (2)
Open AccessIntermittent cryogen spray cooling coupled with cold air jet for heat transfer enhancement and cryogen saving of laser dermatology
Laser dermatology has become a convenient technique for medical treatment. However, the epidermal temperature could be increased, leading to intolerable side effects. Cryogen spray cooling (CSC) is implemented to decrease epidermal damage, but the current CSC could increase cryogen wastage. In this study, the CSC is coupled with a cold air jet (CAJ) and is further subjected to intermittent strategy (ICSC) to mitigate film deposition, enhance heat transfer, and save cryogen consumption, through CAJ-to-spray interaction. The surface temperature is measured by a thin film type-T thermocouple, while the heat transfer is estimated by enhanced Duhamel theorem. The film intensity is captured by a digital single-lens reflex camera through the scattering-illumination technique. The results affirmed the benefits of using ICSC/ICSC-CAJ for laser dermatology. It demonstrated lower surface temperature, film intensity, and film resistance as well as higher convection and efficiency compared with CSC. ICSC-CAJ showed the lowest minimum temperature (1.8%–4.9% decrement) and film resistance (3.8%–17.5% decrement), the highest average convective coefficient (84%–92% increment) and efficiency (7%–9% increment) compared with ICSC. Lower frequency and moderate duties would be preferable for ICSC, while higher frequency and lower duties would be preferable for ICSC-CAJ. The efficiency increased with the saving (110% increment), which insights into our understanding of alternative enhancement toward cryogen saving strategy.
- Open Access
- 1 December 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (12)
Unstable spray pattern and cooling performance of cryogen spray coupled with cold air jet: An experimental study
This study focuses on the interactions between cryogen spray cooling (CSC) and cold air jet (CAJ), as well as the heat transfer performance upon CAJ-CSC impingement assisted for laser dermatology. CAJ is found to collapse downstream spray on the windward side, enhancing fluctuations of R1234yf spray width. Standard deviation (SD) distribution identifies that fluctuations at nozzle exit are attributed to ambient-to-spray interactions, which is also confirmed by the proper orthogonal decomposition (POD) analysis. The third POD mode highlights jet-to-spray interactions on the windward side of spray, yielding an enhanced instability by 1.72 times when CAJ flow rate (Q) increases from 4 to 8 m3/h. The closer location to the spray center on the same radial side corresponds to a faster thermal response and a lower temperature drop (ΔT). ΔT on the windward side decreases due to the considerable CAJ-induced droplet swarm drift. The heat transfer degrades on the leeward side due to the thermal gas boundary layer originating from the inclined CAJ sweep. Nevertheless, the CAJ with a small flow rate (4 m3/h) enhances the heat transfer at spray center, yielding a minimum surface temperature of −32.3 °C. Comparative investigation indicates R134a has superior cooling performance but more significant instabilities inside spray plume. R1234yf serves a relatively stable sub-cooling region within a radial distance of ±1 mm from spray center characterized by low spray fluctuations and high temperature drops at Q = 4 m3/h. Substitution of R1234yf for R134a still needs heat transfer enhancement for clinical considerations.
- 1 December 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (12)
Open AccessUnstable spray pattern and cooling performance of cryogen spray coupled with cold air jet: An experimental study
This study focuses on the interactions between cryogen spray cooling (CSC) and cold air jet (CAJ), as well as the heat transfer performance upon CAJ-CSC impingement assisted for laser dermatology. CAJ is found to collapse downstream spray on the windward side, enhancing fluctuations of R1234yf spray width. Standard deviation (SD) distribution identifies that fluctuations at nozzle exit are attributed to ambient-to-spray interactions, which is also confirmed by the proper orthogonal decomposition (POD) analysis. The third POD mode highlights jet-to-spray interactions on the windward side of spray, yielding an enhanced instability by 1.72 times when CAJ flow rate (Q) increases from 4 to 8 m3/h. The closer location to the spray center on the same radial side corresponds to a faster thermal response and a lower temperature drop (ΔT). ΔT on the windward side decreases due to the considerable CAJ-induced droplet swarm drift. The heat transfer degrades on the leeward side due to the thermal gas boundary layer originating from the inclined CAJ sweep. Nevertheless, the CAJ with a small flow rate (4 m3/h) enhances the heat transfer at spray center, yielding a minimum surface temperature of −32.3 °C. Comparative investigation indicates R134a has superior cooling performance but more significant instabilities inside spray plume. R1234yf serves a relatively stable sub-cooling region within a radial distance of ±1 mm from spray center characterized by low spray fluctuations and high temperature drops at Q = 4 m3/h. Substitution of R1234yf for R134a still needs heat transfer enhancement for clinical considerations.