Yang Ping
Yang Ping has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Chenyu Chen
Power China Eco-Environmental Group Co., Ltd., Shenzhen 518101, China
2 shared publications - Fangze Shang
Power China Eco-Environmental Group Co., Ltd., Shenzhen 518101, China
2 shared publications - Hantao Wang
Power China Eco-Environmental Group Co., Ltd., Shenzhen 518101, China
2 shared publications - Hao Xu
Power China ECO-Environmental Group Co., LTD., Shenzhen 518102, China
2 shared publications - Heng Zhu
Shenzhen Metasensing Technology Co., Ltd., Shenzhen 518102, China
2 shared publications - Shuang Bao
Shenzhen Eye Hospital, Shenzhen Eye Medical Center, Southern Medical University, 18 Zetian Road, Futian District, Shenzhen 518040, China
2 shared publications
Latest Publications
- Open Access
Hydrothermally Synthesized SrS/Polyaniline Nanocomposite Electrodes for Asymmetric Supercapacitor Devices with Enhanced Charge-Storage Performance
The growing demand for efficient and sustainable energy-storage systems has intensified efforts to develop materials capable of delivering both high power output and reliable capacity retention. Conventional supercapacitors excel in rapid charge–discharge processes and offer outstanding cycling durability; however, their inherently low energy density limits large-scale use. In contrast, batteries provide high energy densities but typically display slower power response and poorer rate capability. Consequently, hybrid storage systems that merge capacitive and faradaic mechanisms have emerged as a compelling strategy to overcome these shortcomings. In this study, a SrS/polyaniline (SrS/PANI) nanocomposite was fabricated via hydrothermal synthesis and evaluated as an electrode material for hybrid supercapacitor architectures. Structural and morphological characterisation confirmed the formation of a nanoscale composite with well-integrated phases. Electrochemical performance was first evaluated in a three-electrode half-cell configuration, where the optimized SrS/PANI (50/50 wt%) electrode delivered a GCD-derived specific capacity of 580 C g−1 at 0.4 A g−1. The electrode was then assembled into an asymmetric two-electrode device, which achieved an energy density of 18 Wh kg−1, a power density of 2980 W kg−1, and 75% capacity retention after 1000 cycles. Overall, the findings indicate that the SrS/PANI composite exhibits improved charge-storage behaviour arising from the combined contribution of redox-active SrS and the conducting-polymer component PANI, underscoring its promise for hybrid energy-storage applications.
Open AccessHydrothermally Synthesized SrS/Polyaniline Nanocomposite Electrodes for Asymmetric Supercapacitor Devices with Enhanced Charge-Storage Performance
The growing demand for efficient and sustainable energy-storage systems has intensified efforts to develop materials capable of delivering both high power output and reliable capacity retention. Conventional supercapacitors excel in rapid charge–discharge processes and offer outstanding cycling durability; however, their inherently low energy density limits large-scale use. In contrast, batteries provide high energy densities but typically display slower power response and poorer rate capability. Consequently, hybrid storage systems that merge capacitive and faradaic mechanisms have emerged as a compelling strategy to overcome these shortcomings. In this study, a SrS/polyaniline (SrS/PANI) nanocomposite was fabricated via hydrothermal synthesis and evaluated as an electrode material for hybrid supercapacitor architectures. Structural and morphological characterisation confirmed the formation of a nanoscale composite with well-integrated phases. Electrochemical performance was first evaluated in a three-electrode half-cell configuration, where the optimized SrS/PANI (50/50 wt%) electrode delivered a GCD-derived specific capacity of 580 C g−1 at 0.4 A g−1. The electrode was then assembled into an asymmetric two-electrode device, which achieved an energy density of 18 Wh kg−1, a power density of 2980 W kg−1, and 75% capacity retention after 1000 cycles. Overall, the findings indicate that the SrS/PANI composite exhibits improved charge-storage behaviour arising from the combined contribution of redox-active SrS and the conducting-polymer component PANI, underscoring its promise for hybrid energy-storage applications.
- Open Access
Strain-Engineered Electronic, Structural, and Optical Properties of FeS2 Monolayer: A First-Principles Study for Strain Sensor and Photovoltaic Applications in Flexible Electronics
Two-dimensional (2D) materials have emerged as a key platform for next-generation electronics due to their atomic thickness and tunable properties. Iron disulfide (FeS2), known as pyrite, with a bandgap of ~0.95 eV, is suitable for solar energy applications. However, its performance is limited by defects in bulk crystals. Reducing FeS2 to a single layer eliminates bulk defects and enables strain engineering of the bandgap. In this study, First-principles density functional theory (DFT) calculations are performed using the CASTEP code and the PBEsol functional to examine the structural, electronic, and optical properties of a distorted 1T′-phase FeS2 monolayer. Full geometry optimization yields lattice parameters a′ = 17.594 Å, b′ = 3.20231 Å, c′ = 5.28091 Å, and Fe–S bond angles of ~75.8° and ~98.2°, confirming symmetry-breaking distortion. The monolayer is dynamically stable, showing no imaginary modes in the phonon dispersion, and remains structurally intact up to 1000 K in molecular dynamics simulations. The unstrained system has an indirect bandgap of 0.70 eV, with the valence band maximum at the Γ point (dominated by S-p states) and conduction band minimum near the X point (Fe-d states). Under mechanical strain (±4%), the bandgap decreases significantly: from 0.70 eV to 0.44 eV under +4% tensile strain along the y-axis, and to 0.53 eV under −4% compressive strain. Biaxial strain causes weaker modulation, reducing the gap to 0.66 eV (+4%) and 0.62 eV (−4%). Optical absorption exceeds 104 cm−1 for photon energies above the bandgap, with tensile strain causing redshifts and compressive strain inducing blueshifts. These findings demonstrate that 2D FeS2 is mechanically robust, electronically tunable, and optically active, making it a promising candidate material for flexible strain sensors and photovoltaic devices. This work is intended to motivate and inform future synthesis efforts.
Open AccessStrain-Engineered Electronic, Structural, and Optical Properties of FeS2 Monolayer: A First-Principles Study for Strain Sensor and Photovoltaic Applications in Flexible Electronics
Two-dimensional (2D) materials have emerged as a key platform for next-generation electronics due to their atomic thickness and tunable properties. Iron disulfide (FeS2), known as pyrite, with a bandgap of ~0.95 eV, is suitable for solar energy applications. However, its performance is limited by defects in bulk crystals. Reducing FeS2 to a single layer eliminates bulk defects and enables strain engineering of the bandgap. In this study, First-principles density functional theory (DFT) calculations are performed using the CASTEP code and the PBEsol functional to examine the structural, electronic, and optical properties of a distorted 1T′-phase FeS2 monolayer. Full geometry optimization yields lattice parameters a′ = 17.594 Å, b′ = 3.20231 Å, c′ = 5.28091 Å, and Fe–S bond angles of ~75.8° and ~98.2°, confirming symmetry-breaking distortion. The monolayer is dynamically stable, showing no imaginary modes in the phonon dispersion, and remains structurally intact up to 1000 K in molecular dynamics simulations. The unstrained system has an indirect bandgap of 0.70 eV, with the valence band maximum at the Γ point (dominated by S-p states) and conduction band minimum near the X point (Fe-d states). Under mechanical strain (±4%), the bandgap decreases significantly: from 0.70 eV to 0.44 eV under +4% tensile strain along the y-axis, and to 0.53 eV under −4% compressive strain. Biaxial strain causes weaker modulation, reducing the gap to 0.66 eV (+4%) and 0.62 eV (−4%). Optical absorption exceeds 104 cm−1 for photon energies above the bandgap, with tensile strain causing redshifts and compressive strain inducing blueshifts. These findings demonstrate that 2D FeS2 is mechanically robust, electronically tunable, and optically active, making it a promising candidate material for flexible strain sensors and photovoltaic devices. This work is intended to motivate and inform future synthesis efforts.
- Open Access
- 4 August 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (15) , 7065
Inundation Modeling and Bottleneck Identification of Pipe–River Systems in a Highly Urbanized Area
The compound effects of extreme climate change and intensive urban development have led to more frequent urban inundation, highlighting the urgent need for the fine-scale evaluation of stormwater drainage system performance in high-density urban built-up areas. A typical basin, located in Shenzhen, was selected, and a pipe–river coupled SWMM was developed and calibrated via a genetic algorithm to simulate the storm drainage system. Design storm scenario analyses revealed that regional inundation occurred in the central area of the basin and the enclosed culvert sections of the midstream river, even under a 0.5-year recurrence period, while the downstream open river channels maintained a substantial drainage capacity under a 200-year rainfall event. To systematically identify bottleneck zones, two novel metrics, namely, the node cumulative inundation volume and the conduit cumulative inundation length, were proposed to quantify the local inundation severity and spatial interactions across the drainage network. Two critical bottleneck zones were selected, and strategic improvement via the cross-sectional expansion of pipes and river culverts significantly enhanced the drainage efficiency. This study provides a practical case study and transferable technical framework for integrating hydraulic modeling, spatial analytics, and targeted infrastructure upgrades to enhance the resilience of drainage systems in high-density urban environments, offering an actionable framework for sustainable urban stormwater drainage system management.
- 4 August 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (15) , 7065
Open AccessInundation Modeling and Bottleneck Identification of Pipe–River Systems in a Highly Urbanized Area
The compound effects of extreme climate change and intensive urban development have led to more frequent urban inundation, highlighting the urgent need for the fine-scale evaluation of stormwater drainage system performance in high-density urban built-up areas. A typical basin, located in Shenzhen, was selected, and a pipe–river coupled SWMM was developed and calibrated via a genetic algorithm to simulate the storm drainage system. Design storm scenario analyses revealed that regional inundation occurred in the central area of the basin and the enclosed culvert sections of the midstream river, even under a 0.5-year recurrence period, while the downstream open river channels maintained a substantial drainage capacity under a 200-year rainfall event. To systematically identify bottleneck zones, two novel metrics, namely, the node cumulative inundation volume and the conduit cumulative inundation length, were proposed to quantify the local inundation severity and spatial interactions across the drainage network. Two critical bottleneck zones were selected, and strategic improvement via the cross-sectional expansion of pipes and river culverts significantly enhanced the drainage efficiency. This study provides a practical case study and transferable technical framework for integrating hydraulic modeling, spatial analytics, and targeted infrastructure upgrades to enhance the resilience of drainage systems in high-density urban environments, offering an actionable framework for sustainable urban stormwater drainage system management.
- Open Access
Characteristic Wavelength Selection and Surrogate Monitoring for UV–Vis Absorption Spectroscopy-Based Water Quality Sensing
Ultraviolet-visible (UV–Vis) absorption spectroscopy for in situ water quality sensing has garnered increasing attention. However, the selection of the characteristic wavelengths for water quality indicators has been underexplored in existing studies, resulting in surrogate monitoring models with low accuracy and high complexity. This research used field data from the Maozhou River in Shenzhen. The accuracy of the surrogate model based on the wavelength selection method is 134.8%, 52.5%, and 13.5% improvement in accuracy compared to the single wavelength method, the PCA method, and the full spectrum method, respectively. We investigate seven characteristic wavelength optimisation algorithms and five machine learning models for surrogate monitoring of five water quality indicators: TOC, BOD5, COD, TN, and NO3-N. The results indicate that the competitive adaptive reweighted sampling (CARS) method for wavelength selection, combined with ridge regression as a surrogate monitoring model, achieved the best performance in this study. The determination coefficient (R2) of the five water quality indicators were 0.80, 0.64, 0.82, 0.97, and 0.96, respectively. The study shows that for watersheds with relatively stable water chemical components, there is no need to use overly complex nonlinear models, and the regression model with characteristic wavelength selection can achieve good prediction results. This study provides detailed technical information on river water quality spectral surrogate monitoring, offering an important practice reference.
Open AccessCharacteristic Wavelength Selection and Surrogate Monitoring for UV–Vis Absorption Spectroscopy-Based Water Quality Sensing
Ultraviolet-visible (UV–Vis) absorption spectroscopy for in situ water quality sensing has garnered increasing attention. However, the selection of the characteristic wavelengths for water quality indicators has been underexplored in existing studies, resulting in surrogate monitoring models with low accuracy and high complexity. This research used field data from the Maozhou River in Shenzhen. The accuracy of the surrogate model based on the wavelength selection method is 134.8%, 52.5%, and 13.5% improvement in accuracy compared to the single wavelength method, the PCA method, and the full spectrum method, respectively. We investigate seven characteristic wavelength optimisation algorithms and five machine learning models for surrogate monitoring of five water quality indicators: TOC, BOD5, COD, TN, and NO3-N. The results indicate that the competitive adaptive reweighted sampling (CARS) method for wavelength selection, combined with ridge regression as a surrogate monitoring model, achieved the best performance in this study. The determination coefficient (R2) of the five water quality indicators were 0.80, 0.64, 0.82, 0.97, and 0.96, respectively. The study shows that for watersheds with relatively stable water chemical components, there is no need to use overly complex nonlinear models, and the regression model with characteristic wavelength selection can achieve good prediction results. This study provides detailed technical information on river water quality spectral surrogate monitoring, offering an important practice reference.
- Open Access
Recycled PET Fibers with Dopamine Surface Modification for Enhanced Interlayer Adhesion in 3D Printed Concrete
Three-dimensional printed concrete (3DPC) is increasingly recognized in the construction industry for its high design flexibility and the elimination of conventional formwork. However, weak interlayer adhesion remains a significant challenge. The potential of recycled polyethylene terephthalate (PET) fibers for reinforcing 3DPC is being explored, driven by their environmental sustainability and economic advantages. However, there is an inadequate interfacial adhesion between these recycled fibers and the 3DPC matrix. This study investigated the use of dopamine modification to address this issue and enhance the interlayer adhesion of fiber-reinforced 3DPC. Recycled PET fibers were surface-modified using dopamine treatment, forming a polydopamine (PDA) film that improved surface roughness and hydrophilicity. Both unmodified and modified fibers were incorporated into 3DPC at various volume fractions (0.1%, 0.3%, 0.5%). The effects on interlayer adhesion strength, compressive strength, and flexural strength were systematically evaluated and compared. The results showed that the inclusion of 0.3 vol% dopamine-modified fibers resulted in a 22.5% increase in interlayer adhesion strength compared to the control group, and a 14.8% improvement over unmodified fibers at the same content. Additionally, the compressive strength and flexural strength of 3DPC with 0.3 vol% MPET fibers increased by 22.5% and 27.6%, respectively, compared to the control group. Microstructural analysis using SEM and XRD revealed that the dopamine modification significantly improved the interfacial adhesion between fibers and the concrete matrix, explaining the superior performance of modified fibers. This study demonstrates that recycled PET fibers modified with dopamine can effectively enhance the interlayer adhesion of 3DPC. The findings affirm that surface modification techniques can significantly elevate the utility of recycled PET fibers in 3DPC, contributing to the sustainable advancement of construction materials.
Open AccessRecycled PET Fibers with Dopamine Surface Modification for Enhanced Interlayer Adhesion in 3D Printed Concrete
Three-dimensional printed concrete (3DPC) is increasingly recognized in the construction industry for its high design flexibility and the elimination of conventional formwork. However, weak interlayer adhesion remains a significant challenge. The potential of recycled polyethylene terephthalate (PET) fibers for reinforcing 3DPC is being explored, driven by their environmental sustainability and economic advantages. However, there is an inadequate interfacial adhesion between these recycled fibers and the 3DPC matrix. This study investigated the use of dopamine modification to address this issue and enhance the interlayer adhesion of fiber-reinforced 3DPC. Recycled PET fibers were surface-modified using dopamine treatment, forming a polydopamine (PDA) film that improved surface roughness and hydrophilicity. Both unmodified and modified fibers were incorporated into 3DPC at various volume fractions (0.1%, 0.3%, 0.5%). The effects on interlayer adhesion strength, compressive strength, and flexural strength were systematically evaluated and compared. The results showed that the inclusion of 0.3 vol% dopamine-modified fibers resulted in a 22.5% increase in interlayer adhesion strength compared to the control group, and a 14.8% improvement over unmodified fibers at the same content. Additionally, the compressive strength and flexural strength of 3DPC with 0.3 vol% MPET fibers increased by 22.5% and 27.6%, respectively, compared to the control group. Microstructural analysis using SEM and XRD revealed that the dopamine modification significantly improved the interfacial adhesion between fibers and the concrete matrix, explaining the superior performance of modified fibers. This study demonstrates that recycled PET fibers modified with dopamine can effectively enhance the interlayer adhesion of 3DPC. The findings affirm that surface modification techniques can significantly elevate the utility of recycled PET fibers in 3DPC, contributing to the sustainable advancement of construction materials.
- Open Access
- 15 April 2024
- Published by European Alliance for Innovation n.o. in EAI Endorsed Transactions on Energy Web
- Vol. 11
Research on Establishment and Application of Evaluation System of Urban Energy Strategy Development Indicators under the Perspective of Carbon Neutrality
A scientific, comprehensive and integrated assessment of urban energy development is of great significance for the establishment of a clean, low-carbon and efficient urban modern energy system. From the perspective of carbon neutrality, this paper sets 25 evaluation indicators in seven dimensions: energy supply, energy consumption, energy efficiency improvement, clean and low-carbon, safety and reliability, low-carbon transport, and scientific and technological innovation, and constructs a secondary indicator system for evaluating the strategic development of urban energy. The system adopts the hierarchical analysis method to determine the weights of the indicators, the double-baseline progression method to standardize the indicator scores, and finally the weighted composite index method to calculate the level of urban energy strategy development. This paper applies the index system to evaluate the current energy development status of Wenzhou city in 2020 and 2022, and to predict the energy strategy development in 2025 and 2030. The scores of Wenzhou city's urban energy strategy development level in the corresponding four periods are 63.56, 70.59, 77.87 and 85.06, indicating that by 2023, Wenzhou city's urban energy development level will go from medium development to high development. Wenzhou City should accelerate the proportion of renewable energy in the future. It is necessary to complement multiple energy sources and improve the integration of heat, electricity, gas and cold. In terms of end consumption, it is necessary to improve the efficiency of energy use, reduce energy intensity, implement electric energy substitution and form an energy consumption pattern centered on electricity.
- 15 April 2024
- Published by European Alliance for Innovation n.o. in EAI Endorsed Transactions on Energy Web
- Vol. 11
Open AccessResearch on Establishment and Application of Evaluation System of Urban Energy Strategy Development Indicators under the Perspective of Carbon Neutrality
A scientific, comprehensive and integrated assessment of urban energy development is of great significance for the establishment of a clean, low-carbon and efficient urban modern energy system. From the perspective of carbon neutrality, this paper sets 25 evaluation indicators in seven dimensions: energy supply, energy consumption, energy efficiency improvement, clean and low-carbon, safety and reliability, low-carbon transport, and scientific and technological innovation, and constructs a secondary indicator system for evaluating the strategic development of urban energy. The system adopts the hierarchical analysis method to determine the weights of the indicators, the double-baseline progression method to standardize the indicator scores, and finally the weighted composite index method to calculate the level of urban energy strategy development. This paper applies the index system to evaluate the current energy development status of Wenzhou city in 2020 and 2022, and to predict the energy strategy development in 2025 and 2030. The scores of Wenzhou city's urban energy strategy development level in the corresponding four periods are 63.56, 70.59, 77.87 and 85.06, indicating that by 2023, Wenzhou city's urban energy development level will go from medium development to high development. Wenzhou City should accelerate the proportion of renewable energy in the future. It is necessary to complement multiple energy sources and improve the integration of heat, electricity, gas and cold. In terms of end consumption, it is necessary to improve the efficiency of energy use, reduce energy intensity, implement electric energy substitution and form an energy consumption pattern centered on electricity.
- Open Access
Enhanced Degradation of Deltamethrin in Water through Ferrous Ion Activated Sulfite: Efficiency and Mechanistic Insights
Deltamethrin’s global use as a potent insecticide against pests is well-established. However, the compound’s diverse levels of toxicity are increasingly under scrutiny, drawing significant attention to treatments of deltamethrin. Transition metal activation of sulfite is a promising technology for micropollutant degradation. In this study, iron-activated sulfite was used for the degradation of deltamethrin. The degradation effects and influencing factors and the underlying mechanism of deltamethrin degradation in the system were investigated. The degradation of deltamethrin was effectively achieved by the Fe (III)/sulfite system. The optimal reaction conditions at laboratory scale were determined to be an initial pH of 4, a Fe (III) concentration of 100 μM, and a concentration of 1 mM, where the degradation rate was approximately 69.5%. Dissolved oxygen was identified as an essential factor in the reaction process, with the degradation rate of deltamethrin decreasing by up to 22% under anaerobic conditions. The presence of light facilitated the degradation of deltamethrin within the reaction system, while bicarbonate and natural organic compounds were found to inhibit its degradation. Quenching experiments verified the presence of hydroxyl radicals (HO•) and sulfate radicals () in the reaction system, with HO• being the predominant species. This was further confirmed by EPR experiments. Additionally, density functional theory calculations indicated the propensity for bond breaking between C16 and O21 in deltamethrin molecules, and the degradation pathway was validated through GC-MS analysis of the products formed. Moreover, the Fe (III)/sulfite system demonstrated good degradation performance for deltamethrin in secondary effluent, achieving degradation rates of 46.3%. In particular, the Fe (III)/sulfite system showed minimal bromate formation, attributed to the capacity of sulfite to reduce active bromine intermediates into bromine ions.Open AccessEnhanced Degradation of Deltamethrin in Water through Ferrous Ion Activated Sulfite: Efficiency and Mechanistic Insights
Deltamethrin’s global use as a potent insecticide against pests is well-established. However, the compound’s diverse levels of toxicity are increasingly under scrutiny, drawing significant attention to treatments of deltamethrin. Transition metal activation of sulfite is a promising technology for micropollutant degradation. In this study, iron-activated sulfite was used for the degradation of deltamethrin. The degradation effects and influencing factors and the underlying mechanism of deltamethrin degradation in the system were investigated. The degradation of deltamethrin was effectively achieved by the Fe (III)/sulfite system. The optimal reaction conditions at laboratory scale were determined to be an initial pH of 4, a Fe (III) concentration of 100 μM, and a concentration of 1 mM, where the degradation rate was approximately 69.5%. Dissolved oxygen was identified as an essential factor in the reaction process, with the degradation rate of deltamethrin decreasing by up to 22% under anaerobic conditions. The presence of light facilitated the degradation of deltamethrin within the reaction system, while bicarbonate and natural organic compounds were found to inhibit its degradation. Quenching experiments verified the presence of hydroxyl radicals (HO•) and sulfate radicals () in the reaction system, with HO• being the predominant species. This was further confirmed by EPR experiments. Additionally, density functional theory calculations indicated the propensity for bond breaking between C16 and O21 in deltamethrin molecules, and the degradation pathway was validated through GC-MS analysis of the products formed. Moreover, the Fe (III)/sulfite system demonstrated good degradation performance for deltamethrin in secondary effluent, achieving degradation rates of 46.3%. In particular, the Fe (III)/sulfite system showed minimal bromate formation, attributed to the capacity of sulfite to reduce active bromine intermediates into bromine ions.