Heng Zhu
Research Subjects
Heng Zhu has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Hao Xu
Power China ECO-Environmental Group Co., LTD., Shenzhen 518102, China
2 shared publications - Shuang Bao
Shenzhen Eye Hospital, Shenzhen Eye Medical Center, Southern Medical University, 18 Zetian Road, Futian District, Shenzhen 518040, China
2 shared publications - Yang Ping
Power China ECO-Environmental Group Co., LTD., Shenzhen 518102, China
2 shared publications - Jingwen Yu
Power China ECO-Environmental Group Co., LTD., Shenzhen 518102, China
1 shared publication - Muhammad Naeem Tabassam
Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education and Guangdong Province College of Physics and Optoelectronics Engineering Shenzhen University Shenzhen People's Republic of China
1 shared publication - Muhammad Qaiser Zakaria
Department of Physics, Shanghai University, Shanghai 200444, China
1 shared publication
Latest Publications
- Open Access
Hydrothermally Synthesized SrS/Polyaniline Nanocomposite Electrodes for Asymmetric Supercapacitor Devices with Enhanced Charge-Storage Performance
The growing demand for efficient and sustainable energy-storage systems has intensified efforts to develop materials capable of delivering both high power output and reliable capacity retention. Conventional supercapacitors excel in rapid charge–discharge processes and offer outstanding cycling durability; however, their inherently low energy density limits large-scale use. In contrast, batteries provide high energy densities but typically display slower power response and poorer rate capability. Consequently, hybrid storage systems that merge capacitive and faradaic mechanisms have emerged as a compelling strategy to overcome these shortcomings. In this study, a SrS/polyaniline (SrS/PANI) nanocomposite was fabricated via hydrothermal synthesis and evaluated as an electrode material for hybrid supercapacitor architectures. Structural and morphological characterisation confirmed the formation of a nanoscale composite with well-integrated phases. Electrochemical performance was first evaluated in a three-electrode half-cell configuration, where the optimized SrS/PANI (50/50 wt%) electrode delivered a GCD-derived specific capacity of 580 C g−1 at 0.4 A g−1. The electrode was then assembled into an asymmetric two-electrode device, which achieved an energy density of 18 Wh kg−1, a power density of 2980 W kg−1, and 75% capacity retention after 1000 cycles. Overall, the findings indicate that the SrS/PANI composite exhibits improved charge-storage behaviour arising from the combined contribution of redox-active SrS and the conducting-polymer component PANI, underscoring its promise for hybrid energy-storage applications.
Open AccessHydrothermally Synthesized SrS/Polyaniline Nanocomposite Electrodes for Asymmetric Supercapacitor Devices with Enhanced Charge-Storage Performance
The growing demand for efficient and sustainable energy-storage systems has intensified efforts to develop materials capable of delivering both high power output and reliable capacity retention. Conventional supercapacitors excel in rapid charge–discharge processes and offer outstanding cycling durability; however, their inherently low energy density limits large-scale use. In contrast, batteries provide high energy densities but typically display slower power response and poorer rate capability. Consequently, hybrid storage systems that merge capacitive and faradaic mechanisms have emerged as a compelling strategy to overcome these shortcomings. In this study, a SrS/polyaniline (SrS/PANI) nanocomposite was fabricated via hydrothermal synthesis and evaluated as an electrode material for hybrid supercapacitor architectures. Structural and morphological characterisation confirmed the formation of a nanoscale composite with well-integrated phases. Electrochemical performance was first evaluated in a three-electrode half-cell configuration, where the optimized SrS/PANI (50/50 wt%) electrode delivered a GCD-derived specific capacity of 580 C g−1 at 0.4 A g−1. The electrode was then assembled into an asymmetric two-electrode device, which achieved an energy density of 18 Wh kg−1, a power density of 2980 W kg−1, and 75% capacity retention after 1000 cycles. Overall, the findings indicate that the SrS/PANI composite exhibits improved charge-storage behaviour arising from the combined contribution of redox-active SrS and the conducting-polymer component PANI, underscoring its promise for hybrid energy-storage applications.
- Open Access
Strain-Engineered Electronic, Structural, and Optical Properties of FeS2 Monolayer: A First-Principles Study for Strain Sensor and Photovoltaic Applications in Flexible Electronics
Two-dimensional (2D) materials have emerged as a key platform for next-generation electronics due to their atomic thickness and tunable properties. Iron disulfide (FeS2), known as pyrite, with a bandgap of ~0.95 eV, is suitable for solar energy applications. However, its performance is limited by defects in bulk crystals. Reducing FeS2 to a single layer eliminates bulk defects and enables strain engineering of the bandgap. In this study, First-principles density functional theory (DFT) calculations are performed using the CASTEP code and the PBEsol functional to examine the structural, electronic, and optical properties of a distorted 1T′-phase FeS2 monolayer. Full geometry optimization yields lattice parameters a′ = 17.594 Å, b′ = 3.20231 Å, c′ = 5.28091 Å, and Fe–S bond angles of ~75.8° and ~98.2°, confirming symmetry-breaking distortion. The monolayer is dynamically stable, showing no imaginary modes in the phonon dispersion, and remains structurally intact up to 1000 K in molecular dynamics simulations. The unstrained system has an indirect bandgap of 0.70 eV, with the valence band maximum at the Γ point (dominated by S-p states) and conduction band minimum near the X point (Fe-d states). Under mechanical strain (±4%), the bandgap decreases significantly: from 0.70 eV to 0.44 eV under +4% tensile strain along the y-axis, and to 0.53 eV under −4% compressive strain. Biaxial strain causes weaker modulation, reducing the gap to 0.66 eV (+4%) and 0.62 eV (−4%). Optical absorption exceeds 104 cm−1 for photon energies above the bandgap, with tensile strain causing redshifts and compressive strain inducing blueshifts. These findings demonstrate that 2D FeS2 is mechanically robust, electronically tunable, and optically active, making it a promising candidate material for flexible strain sensors and photovoltaic devices. This work is intended to motivate and inform future synthesis efforts.
Open AccessStrain-Engineered Electronic, Structural, and Optical Properties of FeS2 Monolayer: A First-Principles Study for Strain Sensor and Photovoltaic Applications in Flexible Electronics
Two-dimensional (2D) materials have emerged as a key platform for next-generation electronics due to their atomic thickness and tunable properties. Iron disulfide (FeS2), known as pyrite, with a bandgap of ~0.95 eV, is suitable for solar energy applications. However, its performance is limited by defects in bulk crystals. Reducing FeS2 to a single layer eliminates bulk defects and enables strain engineering of the bandgap. In this study, First-principles density functional theory (DFT) calculations are performed using the CASTEP code and the PBEsol functional to examine the structural, electronic, and optical properties of a distorted 1T′-phase FeS2 monolayer. Full geometry optimization yields lattice parameters a′ = 17.594 Å, b′ = 3.20231 Å, c′ = 5.28091 Å, and Fe–S bond angles of ~75.8° and ~98.2°, confirming symmetry-breaking distortion. The monolayer is dynamically stable, showing no imaginary modes in the phonon dispersion, and remains structurally intact up to 1000 K in molecular dynamics simulations. The unstrained system has an indirect bandgap of 0.70 eV, with the valence band maximum at the Γ point (dominated by S-p states) and conduction band minimum near the X point (Fe-d states). Under mechanical strain (±4%), the bandgap decreases significantly: from 0.70 eV to 0.44 eV under +4% tensile strain along the y-axis, and to 0.53 eV under −4% compressive strain. Biaxial strain causes weaker modulation, reducing the gap to 0.66 eV (+4%) and 0.62 eV (−4%). Optical absorption exceeds 104 cm−1 for photon energies above the bandgap, with tensile strain causing redshifts and compressive strain inducing blueshifts. These findings demonstrate that 2D FeS2 is mechanically robust, electronically tunable, and optically active, making it a promising candidate material for flexible strain sensors and photovoltaic devices. This work is intended to motivate and inform future synthesis efforts.