ДВД. А. Волик

Д. А. Волик

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Д. А. Волик has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Дослідження процесу очищення зерна на плоскорешітному сепараторі

    by С. П. Степаненко, Б. І. Котов, А. Я. Кузьмич, В. О. Швидя, В. І. Днесь, Д. А. Волик

    Викладено результати експериментальних досліджень процесу очищення зернового матеріалу на пересувному плоскорешітному сепараторі з удосконаленою аспіраційною камерою. Дослідження проводилися з метою підвищення ефективності відокремлення легких домішок та зменшення втрат повноцінного зерна в аспіраційних каналах. У ході експериментів проаналізовано вплив основних конструктивних і режимних параметрів аспіраційної камери на показники очищення, зокрема швидкість повітряного потоку, подачу зернової суміші та геометричні характеристики камери. За результатами обробки експериментальних даних отримано рівняння регресії, що описують залежність ефективності очищення та процесу осадження легких домішок від досліджуваних факторів. Отримані залежності можуть бути використані для обґрунтування раціональних параметрів аспіраційної камери та оптимізації роботи пересувних плоскорешітних зерноочисних машин.


  • Justification of the criterion equation for the vibro-pneumo-impulse seed separation process

    by S. P. Stepanenko, B. I. Kotov, A. Ya. Kuzmych, D. A. Volyk, I. S. Popadyuk

    Purpose. Justification of the dependence linking seed density in the seed separation process in a vibro-pneumo-impulse separator to its main structural, kinematic, and aerodynamic parameters. Methods. To achieve the stated objective, the methods of dimensional analysis, similarity theory, and the least squares method for processing experimental data were applied. Results. The key dimensionless criteria determining the process of vibro-pneumo-impulse seed separation were established. An empirical criterial equation was obtained, describing the dependence of seed density on the structural, kinematic, and aerodynamic parameters of the separator. Conclusions 1. Based on the application of dimensional analysis and similarity theory, the key dimensionless criteria determining the vibro-pneumo-impulse seed separation process were substantiated. This made it possible to account for the combined influence of the structural, kinematic, and aerodynamic parameters of the separator on the density of the separated material. 2. An empirical criterion equation was derived, which accurately describes the dependence of seed density on the identified dimensionless complexes. The numerical values of the exponents in the equation were determined using the least squares method based on experimental data, confirming its reliability and adequacy. 3. The obtained criterion equation serves as an effective tool for predicting seed density after vibro-pneumo-impulse separation and enables optimization of the separator’s operating modes. Analysis of the influence of each dimensionless complex on seed density revealed that the most significant factors are the ratio of vibration frequencies, the duration of the fractionation process, and the inclination angle of the deck. 4. The research results have practical value for the design of new and modernization of existing vibro-pneumo-impulse separators, allowing a reduction in experimental research costs and shortening the development time of efficient technical equipment for post-harvest grain processing. Keywords: density, seed, vibro-pneumo-impulse separation process, kinematic parameters, aerodynamic parameters.


  • Experimental researches of the process of vibropneumo-impulseseed separation

    by S. P. Stepanenko, D. A Volyk

    Purpose. The purpose of the work is to improve the quality of the process of separating wheat seeds with a vibropneumo-impulsemachine. Methods. To ensure the implementation of the set goal of the work, methods of regression analysis and experimental planning were used. Experimental data processing was performed using the application software Microsoft Excel, Statistica, Mathcad. Results. The work presents the results of experimental researches of the process of separating grains by density with a vibropneumo-impulse machine. The dependences of seed separation on the pulsation speed of the air flow, the air flow supply, and the frequency of vibration of the working surface were obtained. Conclusions. The results of experimental researches showed that the most effective separation of the grain mixture is achieved with complex regulation of the specified parameters. In particular, it was found that under conditions (air flow rate – 5040 m³/h, vibration amplitude – 3 mm, vibration frequency – 12 Hz, air flow pulsation frequency – 6 Hz, surface inclination angle – 6°) maximum separation efficiency is achieved, which is manifested in an increase in the yield of conditioned grain by 15–18 % compared to standard technologies. Thus, the conducted experimental researches allowed us to determine the rational parameters of the operation of a vibropneumo-impulsemachine for effective separation of grain by density, which opens up prospects for its implementation in production conditions and further modernization of grain cleaning equipment. Keywords: seeds, vibropneumo-impulse separation process, density, specific load, regression equation, seed movement speed.

  • Open Access

    ЧИСЕЛЬНЕ МОДЕЛЮВАННЯ ПРОЦЕСУ ВІБРАЦІЙНОГО ПЕРЕМІЩЕННЯ ЗЕРНІВКИ ДЕКОЮ З ПУЛЬСУВАЛЬНИМ ПОВІТРЯНИМ СЕРЕДОВИЩЕМ

    by С. П. Степаненко, Б. І. Котов, Д. А. Волик, В. А. Мельник

    Сучасне агропромислове виробництво України потребує нових, більш ефективних машин для очищення зернового вороху та фракціонування зерна. Більшість зерноочисних машин, які пропонуються промисловістю, працює на основі зворотно-поступального руху решітних станів. Проте продуктивність таких машин значно нижча порівняно з тими, де під решітний стан подається повітряний потік, а в нашому випадку – пульсувальний повітряний потік. Водночас точна траєкторія руху зернового матеріалу безпровальним решетом залишається недостатньо вивченою. За частот обертання в межах n = 600 об/хв на початковій стадії руху зернини по решету вона спочатку здійснює синусоїдальний рух, який потім переходить у експоненціальне підвищення. На основі проведених розрахунків установлено, що за низької частоти обертання час перебування зернового матеріалу на решеті скорочується, а за максимальної – збільшується через малу відстань між вершинами синусоїди, що підвищує імовірність рекомбінації зернівок за висотою шару матеріалу на поверхні безпровального решета. Зміна кута нахилу відносно поздовжньої осі решета також сприяє збільшенню пропускної здатності та покращенню якості розподілу зернового матеріалу.

  • ОСНОВИ РОЗРАХУНКУ ТА КОНСТРУЮВАННЯ СУШИЛЬНИХ УСТАНОВОК ІЗ РОЗРІДЖЕНИМ СЕРЕДОВИЩЕМ

    by С. П. Степаненко, В. О. Швидя, А. Я. Кузьмич, М. М. Анеляк, І. С. Попадюк, Д. А. Волик

    У навчальному посібнику розглянуто основні положення процесу сушіння зерна, аналіз технічних засобів та систем енергозбереження при сушінні зерна, науково-методичні підходи теорії сушіння зернових матеріалів в енергоощадних технологічних процесах. Призначено для здобувачів другого та третього (освітньо-наукового) рівнів вищої освіти за спеціальністю G11 «Галузеве машинобудування» та H7 «Агроінженерія». Може бути корисним для фахівців відповідної професії.

  • Open Access

    A Machine Vision Approach for Grain Quality Control During Separation

    by Serhii Stepanenko, Alvian Kuzmych, Serhii Kharchenko, Boris Andrey, Viktor Dnes, Daryna Volyk, Roman Kalinichenko

    The research aims to develop a method for determining the content of impurities in grain materials by analyzing digital images. The addressed problem was establishing a method for grain quality control using machine vision to create integrated automation systems for separating grain materials in post-harvest processing. Based on the research result, it was established that grain materials are characterized by significant heterogeneity in physical and mechanical properties and variability of their fractional composition due to changes in the conditions of their threshing by combined harvesters. The contamination of grain materials with non-grain impurities is 0.2–3.3 %. Therefore, to increase the efficiency of post-harvest processing, it is necessary to ensure fast and accurate control of grain material flows. The developed software performed segmentation and determined the pixel areas of grain material objects, providing the rejection of noise and false objects. The weight coefficients of the five main components of wheat grain materials were evaluated based on the experimental results. Statistical processing showed a relatively low variability of the weight coefficients of winter wheat grain, not exceeding 1.6 %. The developed method for evaluating the quantitative content of fractions in grain material allowed for determining the contamination of grain in the separation processes using the experimentally evaluated relative weight coefficients of the main five fractions for wheat grain materials. The developed method helps create control and automation systems for post-harvest processing of grain materials.


  • Study of Physical-mechanical and Optical Characteristics of Grain Materials

    by Serhii Stepanenko, Alvian Kuzmych, Andriy Borys, Viktor Dnesʹ, Daryna Volyk, Anna Kuzmych

    The purpose of the study is to experimentally study the dependence of the physical and mechanical parameters of wheat grain on the moisture level and optical characteristics: the coefficient of friction on the perforated surface, the angle of natural slope and the coefficient of internal friction, the coefficient of absorption and reflection of light rays from the grain. The study is based on experimental data on the main physical and mechanical characteristics of wheat and its husks. The method of determining the physical and mechanical characteristics of wheat grain is presented, and the conditions of the experiments are described. The work presents a structural and functional scheme and a description of the device for determining the optical characteristics of grain materials. According to the results of the research, the values of the studied properties of the material at different levels of humidity were obtained. The conducted analysis showed that with an increase in humidity, the investigated indicators also increase: the coefficient of friction against the surface, the angle of natural slope and the coefficient of internal friction. In the humidity range of 15-17%, the increase in the values of all indicators is almost not observed and is restored only with a further increase in humidity. The values of the spectral reflection coefficients of visible radiation from grain materials and the radiation transmission coefficients from the height of the grain material layer were obtained. In the humidity range of 15–16.5%, there is almost no increase in the value of the coefficient of friction, and with a further increase in humidity, its increase is restored. The study found that with an increase in the height of the layer of granular materials to 10–15 mm, the value of the light radiation transmission coefficient goes to zero. That is, it can be assumed that grain with a layer height of more than 10 mm and grain impurities with a layer height of more than 15–20 mm become optically opaque materials. The obtained results can be used for the theoretical calculation of the design parameters and modes of the device for determining the optical characteristics of grain materials, as well as for determining the kinematic elements of the movement of the working surface and the processed material at different levels of moisture of the grain entering the express processing.

  • Algorithm of Digital Identification of Grain Materials

    by Serhii Stepanenko, Viktor Dnes, Andriy Borys, Alvian Kuzmych, Daryna Volyk

    The article examines the application of machine vision technologies to enhance the accuracy and efficiency of grain material identification during post-harvest processing. It has been determined that traditional grain quality control methods, including visual, microbiological, and chemical tests, have significant limitations in identifying impurities, especially those similar in physical and visual characteristics. In response to these challenges, a digital grain identification algorithm based on machine vision and machine learning methods is proposed. The algorithm allows for rapid and accurate analysis of grain material images, enabling automatic recognition, classification, and quality assessment. Additionally, the algorithm shows potential for scalability and integration into modern agro-industrial processes, helping to minimize grain loss and improve preservation during transportation and storage. This positions machine vision technologies as a promising tool for ensuring food security in Ukraine. The article summarizes global experience in digital object identification in images and highlights possible methods for identifying grain materials, facilitating the development of the algorithm. A preliminary version of the digital identification algorithm for grain materials has been developed, incorporating relevant methods that enable recognition, classification, and evaluation of grain material indicators. Convolutional Neural Networks (CNNs) have been found to be the main type of neural networks for working with images, which are specialized for processing data with mesh topology. They have become very popular in computer vision tasks, including object recognition, image segmentation, and classification, due to their ability to automatically train and extract features without the need to explicitly define them manually. Deep neural networks are now the dominant classification approach because they automatically extract complex features and have high accuracy. The choice of a specific method depends on the availability of data, resources and requirements for classification accuracy. After classification, it is necessary to determine their specific parameters for objects classified as grains - the fourth stage of the algorithm. These parameters mean the shape of the grain and its geometric dimensions (width and length). The shape of the grain contour reflects the actual shape of the grain.

  • Open Access

    МОДЕЛЮВАННЯ ПРОЦЕСУ ПЕРЕМІЩЕННЯ ЗЕРНОВОГО МАТЕРІАЛУ В РОБОЧІЙ ЗОНІ СЕПАРАТОРА

    by С. П. Степаненко, Б. І. Котов, В. А. Мельник, Д. А. Волик

    Анотація. Отримано замкнуту систему рівнянь зі зв'язуючим рівнянням, яка дозволяє моделювати рух насіння по обертовій поверхні. При чисельному інтегруванні цієї системи можна оцінити ефективність різних поверхонь розкидача пневмовідцентрового сепаратора для досягнення бажаних результатів, таких як зменшення геометричних розмірів, підвищення продуктивності або покращення якості сепарування. Чисельне інтегрування враховує вплив фізичних, геометричних, технологічних і кінематичних параметрів на кінцевий результат, включаючи час і швидкість руху в циліндричних координатах. Моделювання руху насіння по поверхні розкидача пневмовідцентрового сепаратора дозволяє обґрунтувати раціональні геометричні розміри ротора та оптимальні технологічні режими роботи. Застосування розкидачів зернового матеріалу з криволінійними поверхнями у пневмовідцентрових сепараторах для прискорення руху насіння є перспективним підходом у післязбиральній обробці. Моделювання руху насіння на таких поверхнях дозволяє прогнозувати їх рух із повним розумінням впливу різних параметрів на процес рівномірного розподілу по периметру каналу ротора сепаратора. Чисельне інтегрування в реальних умовах експлуатації допомагає оптимізувати геометрію розкидача та технологічні параметри для досягнення найкращих результатів. Це сприяє ефективнішому використанню ресурсів та покращенню якості обробки зернових матеріалів.


  • ДОСЛІДЖЕННЯ РОЗВИТКУ ТЕХНОЛОГІЙ ТА ТЕХНІЧНИХ ЗАСОБІВ ДЛЯ ПНЕВМОВІДЦЕНТРОВОГО РОЗДІЛЕННЯ ЗЕРНОВИХ МАТЕРІАЛІВ

    by В. А. Мельник, І. С. Попадюк, Д. А. Волик, С. П. Степаненко

    У статті представлений аналіз сучасних тенденцій у напрямку розвитку технологій для пневматично-відцентрової сепарації зерна та насіння. Проведений аналіз технічних засобів для пневмовідцентрового розділення зернових матеріалів показав, що вони є ефективними пристроями для сортування матеріалів за допомогою аеродинамічних принципів і розділення їх на фракції за густиною насіння. Також варто зазначити, що наукові принципи, що лягли в основу конструкцій цих машин, дозволяють розділити продукти за їхньою густиною за допомогою потоку повітря, що забезпечує комбіновану дію видалення легких домішок та очищення зерна. Встановлено, що розглянуті конструкції технічних засобів для пневмовідцентрового розділення зернових матеріалів характеризуються вдосконаленою конструкцією, що забезпечує кращу рівномірність розподілу матеріалів по робочих поверхнях сепаруючих решіт і компактність їх виробництва. Перевагами цих пристроїв безсумнівно є висока продуктивність і низьке енергоспоживання, що робить їх привабливими для виробництва та обробки зерна та інших сільськогосподарських матеріалів. Аналіз останніх тенденцій у розвитку машин і обладнання для пневмовідцентрового розділення зернових матеріалів свідчить про актуальність і перспективність цього напрямку досліджень.