Penghao Luo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Penghao Luo has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
- Junwen Zhang
Fudan University
16 shared publications - Nan Chi
Fudan University
14 shared publications - An Yan
Fudan University
13 shared publications - Jianyang Shi
Fudan University
12 shared publications - Aolong Sun
Fudan University
10 shared publications - Sizhe Xing
Key Laboratory for Information Science of Electromagnetic Waves (MoE), Shanghai Engineering Research Center of LEO Satellite Communication and Applications, Shanghai Collaborative Innovation Center of LEO Satellite Communication Technology, Department of Communication Science and Engineering, Fudan University, Shanghai, China
9 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44  (21) , 9382-9391
Flexible Optical Access Based on C-Band Unified OLT Supporting Coherent and IM/DD ONU Interoperability via DSP and Zero-Flip Encoding
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44  (21) , 9382-9391
Flexible Optical Access Based on C-Band Unified OLT Supporting Coherent and IM/DD ONU Interoperability via DSP and Zero-Flip Encoding
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44  (13) , 5424-5434
Field Demonstration of W-Band Millimeter-Wave Routing and Relaying After 4.3-km Wireless Transmission Utilizing Photonic Technology
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44  (13) , 5424-5434
Field Demonstration of W-Band Millimeter-Wave Routing and Relaying After 4.3-km Wireless Transmission Utilizing Photonic Technology
- 23 April 2026
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 18  (7) , C13
Cost-effective and flexible coherent passive optical networks [Invited]
Driven by the continuous growth of bandwidth-intensive services, optical access networks are required to support ever-increasing data rates. Benefiting from high receiver sensitivity, expanded modulation dimensions, and wavelength selectivity, coherent optics is emerging as a promising solution for next-generation 200G or even 400G optical access networks. Accordingly, coherent PON has been included by ITU-T Q2/SG15 as a candidate solution for very high-speed PON. As a point-to-multipoint system, cost is a critical factor in CPON deployment, making cost optimization particularly important, especially at the optical network unit side. In addition, enabling flexible rate allocation in CPON systems is essential to fully exploit heterogeneous channel conditions among users and to improve overall system efficiency. In this paper, building upon our recent work published in ECOC 2025, we review key enabling technologies for next-generation CPON from the perspectives of cost simplification and flexibility. Furthermore, the main challenges associated with cost-effective and flexible CPON systems are analyzed, and potential solution directions are discussed.
- 23 April 2026
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 18  (7) , C13
Cost-effective and flexible coherent passive optical networks [Invited]
Driven by the continuous growth of bandwidth-intensive services, optical access networks are required to support ever-increasing data rates. Benefiting from high receiver sensitivity, expanded modulation dimensions, and wavelength selectivity, coherent optics is emerging as a promising solution for next-generation 200G or even 400G optical access networks. Accordingly, coherent PON has been included by ITU-T Q2/SG15 as a candidate solution for very high-speed PON. As a point-to-multipoint system, cost is a critical factor in CPON deployment, making cost optimization particularly important, especially at the optical network unit side. In addition, enabling flexible rate allocation in CPON systems is essential to fully exploit heterogeneous channel conditions among users and to improve overall system efficiency. In this paper, building upon our recent work published in ECOC 2025, we review key enabling technologies for next-generation CPON from the perspectives of cost simplification and flexibility. Furthermore, the main challenges associated with cost-effective and flexible CPON systems are analyzed, and potential solution directions are discussed.
- 28 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44  (8) , 3150-3158
High Power Hybrid Integrated Si 3 N 4 External Cavity Laser With Full C-Band Wavelength Locking
We propose a hybrid integrated narrow-linewidth silicon nitride (Si3N4) external cavity laser module with high power output, full C-band wavelength tuning, and precise wavelength locking. The external cavity laser (ECL) consists of a gain chip and a Si3N4 external cavity chip, achieving a wavelength tuning range of 43 nm, a side mode suppression ratio (SMSR) exceeding 50 dB, and a linewidth of less than 1.5 kHz. The laser module integrates a semiconductor optical amplifier (SOA) for optical power amplification, a maximum output power is amplified up to 270 mW after the SOA, and the fiber-coupled output power reaches 220 mW. High precision wavelength locking of 55 International Telecommunication Union (ITU)-grid at 100 GHz intervals are achieved using a wavelength locker based on the Fabry-Pérot (FP) etalon, with frequency deviations all less than ± 0.3 GHz and frequency drift less than 30 MHz over 24 hours. The frequency-locked laser has demonstrated excellent temperature stability, exhibiting no mode-hopping and maintaining a frequency variation of less than 1.57 GHz throughout ambient temperature cycling tests ranging from 15 °C to 55 °C. Furthermore, this module, serving as the transmitter laser, has enabled 200 Gbps dual-polarization (DP) 16 QAM/QPSK coherent transmission, verifying its feasibility for inter-satellite coherent laser communication.
- 28 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44  (8) , 3150-3158
High Power Hybrid Integrated Si 3 N 4 External Cavity Laser With Full C-Band Wavelength Locking
We propose a hybrid integrated narrow-linewidth silicon nitride (Si3N4) external cavity laser module with high power output, full C-band wavelength tuning, and precise wavelength locking. The external cavity laser (ECL) consists of a gain chip and a Si3N4 external cavity chip, achieving a wavelength tuning range of 43 nm, a side mode suppression ratio (SMSR) exceeding 50 dB, and a linewidth of less than 1.5 kHz. The laser module integrates a semiconductor optical amplifier (SOA) for optical power amplification, a maximum output power is amplified up to 270 mW after the SOA, and the fiber-coupled output power reaches 220 mW. High precision wavelength locking of 55 International Telecommunication Union (ITU)-grid at 100 GHz intervals are achieved using a wavelength locker based on the Fabry-Pérot (FP) etalon, with frequency deviations all less than ± 0.3 GHz and frequency drift less than 30 MHz over 24 hours. The frequency-locked laser has demonstrated excellent temperature stability, exhibiting no mode-hopping and maintaining a frequency variation of less than 1.57 GHz throughout ambient temperature cycling tests ranging from 15 °C to 55 °C. Furthermore, this module, serving as the transmitter laser, has enabled 200 Gbps dual-polarization (DP) 16 QAM/QPSK coherent transmission, verifying its feasibility for inter-satellite coherent laser communication.
- 24 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74  (3) , 2968-2981
Demonstration of Transparent Polarization-Division Multiplexed Fiber–Radio–Fiber Bridge at W-Band Based on Direct Full-Photonic Conversions
The growing demands of emerging services are driving wireless communication systems toward higher data rates and capacity. However, the increasingly congested radio frequency (RF) spectrum presents a major challenge. Millimeter wave (mmWave) in the W-band (75110 GHz) offers promising solutions due to its wide available bandwidth and low atmospheric attenuation, making it an ideal candidates for future high-capacity wireless links. Direct full-photonic-aided mmWave systems, leveraging photonic up- and down-conversion techniques, enable the generation of high-quality, broadband mmWave signals and allow seamless integration with optical fiber networks. Such fiberradiofiber bridge architectures provide flexible extensions of fiber networks and various wireless applications. In this work, we present a comprehensive analysis of recent advances in photonics-aided mmWave systems and demonstrate a transparent polarization-division multiplexed (PDM) fiberradiofiber signaling bridge operating in the W-band based on direct full-photonic conversion technology. A single-channel system achieves a maximum data rate of 140 Gbit/s using 35-Gbaud/s 16-quadrature amplitude modulation (16QAM) and 155 Gbit/s using 31-Gbaud/s 32QAM over a 20-km transmission fiber, a 1-m wireless link, and a 10-km reception fiber. The bit error rate (BER) threshold is set to $2\times 10^{-2}$ , compatible with soft-decision forward error correction (SD-FEC) with 15% overhead (OH). Furthermore, by employing optical polarization-division multiplexing and a $2\times 2$ multiple input multiple output (MIMO) antenna array, we realize the full-coherent fiberwirelessfiber transmission of PDM signals. Under the same transmission configuration, the system achieves up to 66-Gbaud/s 16QAM, yielding a total data rate of 264 Gbit/s (33 Gbaud/s $\times $ two polarizations $\times 4$ bits/symbol). This demonstration surpasses a total capacity of 250 Gbit/s, significantly expanding the application potential of full-photonic mmWave wireless transmission architectures.
- 24 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74  (3) , 2968-2981
Demonstration of Transparent Polarization-Division Multiplexed Fiber–Radio–Fiber Bridge at W-Band Based on Direct Full-Photonic Conversions
The growing demands of emerging services are driving wireless communication systems toward higher data rates and capacity. However, the increasingly congested radio frequency (RF) spectrum presents a major challenge. Millimeter wave (mmWave) in the W-band (75110 GHz) offers promising solutions due to its wide available bandwidth and low atmospheric attenuation, making it an ideal candidates for future high-capacity wireless links. Direct full-photonic-aided mmWave systems, leveraging photonic up- and down-conversion techniques, enable the generation of high-quality, broadband mmWave signals and allow seamless integration with optical fiber networks. Such fiberradiofiber bridge architectures provide flexible extensions of fiber networks and various wireless applications. In this work, we present a comprehensive analysis of recent advances in photonics-aided mmWave systems and demonstrate a transparent polarization-division multiplexed (PDM) fiberradiofiber signaling bridge operating in the W-band based on direct full-photonic conversion technology. A single-channel system achieves a maximum data rate of 140 Gbit/s using 35-Gbaud/s 16-quadrature amplitude modulation (16QAM) and 155 Gbit/s using 31-Gbaud/s 32QAM over a 20-km transmission fiber, a 1-m wireless link, and a 10-km reception fiber. The bit error rate (BER) threshold is set to $2\times 10^{-2}$ , compatible with soft-decision forward error correction (SD-FEC) with 15% overhead (OH). Furthermore, by employing optical polarization-division multiplexing and a $2\times 2$ multiple input multiple output (MIMO) antenna array, we realize the full-coherent fiberwirelessfiber transmission of PDM signals. Under the same transmission configuration, the system achieves up to 66-Gbaud/s 16QAM, yielding a total data rate of 264 Gbit/s (33 Gbaud/s $\times $ two polarizations $\times 4$ bits/symbol). This demonstration surpasses a total capacity of 250 Gbit/s, significantly expanding the application potential of full-photonic mmWave wireless transmission architectures.
- 24 December 2025
- Published by Optica Publishing Group in Photonics Research
- Vol. 14  (1) , 156
Silicon-photonics-based ultimate-simplified coherent optics with reduced DC leakage for next-generation optical access networks
Coherent passive optical network (PON) is a promising architecture that offers high sensitivity and support for advanced modulation formats. However, fully coherent systems have high complexity and cost, making them unsuitable for cost-sensitive user-end applications. Additionally, in coherent access architectures, the lasers of optical network units (ONUs) in the upstream are typically kept on rather than being switched off to avoid wavelength drift, with the Mach–Zehnder modulators (MZMs) biased at the null point for modulation. However, the limited extinction ratio (ER) of the MZM introduces direct current (DC) leakage, which degrades system performance and limits the number of users the network can support. To address this issue, we design and fabricate the first silicon-photonics-based ultimate-simplified coherent-optics chip for ONU. The simplified transmitter employs a single MZM combined with a high-speed optical switch (OS), while the simplified receiver adopts a hybrid and a standalone photodetector (PD) for coherent detection with Alamouti coding. By integrating the OS, the upstream achieves a maximum ER of 63.93 dB, while the OS switching speed meets the guard interval requirements of PON systems. Compared to a traditional single MZM with a 26 dB ER, our design achieves an additional 37.93 dB improvement, which significantly increases the user capacity in PON systems. Comprehensive experiments were conducted to validate the proposed design. Ultimately, leveraging this ultimate-simplified coherent-optics chip, a 100 Gbps bidirectional transmission was successfully demonstrated with a power budget exceeding 29 dBm, verifying its feasibility and cost-effectiveness for next-generation coherent optical access networks.
- 24 December 2025
- Published by Optica Publishing Group in Photonics Research
- Vol. 14  (1) , 156
Silicon-photonics-based ultimate-simplified coherent optics with reduced DC leakage for next-generation optical access networks
Coherent passive optical network (PON) is a promising architecture that offers high sensitivity and support for advanced modulation formats. However, fully coherent systems have high complexity and cost, making them unsuitable for cost-sensitive user-end applications. Additionally, in coherent access architectures, the lasers of optical network units (ONUs) in the upstream are typically kept on rather than being switched off to avoid wavelength drift, with the Mach–Zehnder modulators (MZMs) biased at the null point for modulation. However, the limited extinction ratio (ER) of the MZM introduces direct current (DC) leakage, which degrades system performance and limits the number of users the network can support. To address this issue, we design and fabricate the first silicon-photonics-based ultimate-simplified coherent-optics chip for ONU. The simplified transmitter employs a single MZM combined with a high-speed optical switch (OS), while the simplified receiver adopts a hybrid and a standalone photodetector (PD) for coherent detection with Alamouti coding. By integrating the OS, the upstream achieves a maximum ER of 63.93 dB, while the OS switching speed meets the guard interval requirements of PON systems. Compared to a traditional single MZM with a 26 dB ER, our design achieves an additional 37.93 dB improvement, which significantly increases the user capacity in PON systems. Comprehensive experiments were conducted to validate the proposed design. Ultimately, leveraging this ultimate-simplified coherent-optics chip, a 100 Gbps bidirectional transmission was successfully demonstrated with a power budget exceeding 29 dBm, verifying its feasibility and cost-effectiveness for next-generation coherent optical access networks.
- 7 October 2025
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 17  (11) , 984
Upstream receiver IQ impairment analysis and compensation in coherent digital subcarrier multiplexing passive optical networks
The growing demand for high-capacity and flexible access has made digital subcarrier multiplexing (DSCM)-based coherent passive optical networks (PONs) increasingly attractive. However, in upstream transmission, amplitude, phase, and skew mismatches between the in-phase (I) and quadrature (Q) branches at the receiver of the optical line terminal may lead to image interference between symmetric subcarriers, thus degrading the system performance. To address this issue, this work theoretically analyzes the impairment mechanism and proposes a data-aided 8×4 real-valued multi-input multi-output (MIMO) equalization scheme for joint compensation. To our knowledge, this is the first experimental demonstration of MIMO-based subcarrier joint equalization for receiver IQ impairment compensation in the burst-mode upstream reception. Experimental results show that the proposed MIMO achieves stable compensation for IQ skew up to ±40ps and IQ gain imbalance from −8 to +7dB in dual-subcarrier systems, while maintaining a Q-penalty within 0.5 dB under frequency offsets up to 500 MHz. A 400G TFDM-PON upstream system is further demonstrated, achieving −29.1dBm receiver sensitivity and a 32.1 dB power budget. These results provide a practical solution for IQ impairment mitigation and support robust, scalable deployment of coherent DSCM-based access networks.
- 7 October 2025
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 17  (11) , 984
Upstream receiver IQ impairment analysis and compensation in coherent digital subcarrier multiplexing passive optical networks
The growing demand for high-capacity and flexible access has made digital subcarrier multiplexing (DSCM)-based coherent passive optical networks (PONs) increasingly attractive. However, in upstream transmission, amplitude, phase, and skew mismatches between the in-phase (I) and quadrature (Q) branches at the receiver of the optical line terminal may lead to image interference between symmetric subcarriers, thus degrading the system performance. To address this issue, this work theoretically analyzes the impairment mechanism and proposes a data-aided 8×4 real-valued multi-input multi-output (MIMO) equalization scheme for joint compensation. To our knowledge, this is the first experimental demonstration of MIMO-based subcarrier joint equalization for receiver IQ impairment compensation in the burst-mode upstream reception. Experimental results show that the proposed MIMO achieves stable compensation for IQ skew up to ±40ps and IQ gain imbalance from −8 to +7dB in dual-subcarrier systems, while maintaining a Q-penalty within 0.5 dB under frequency offsets up to 500 MHz. A 400G TFDM-PON upstream system is further demonstrated, achieving −29.1dBm receiver sensitivity and a 32.1 dB power budget. These results provide a practical solution for IQ impairment mitigation and support robust, scalable deployment of coherent DSCM-based access networks.
- 11 September 2025
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 18  (1) , A9-A18
Simplified coherent TDM-PON in upstream burst-mode detection with enhanced DC leakage tolerance
This paper investigates the generation and impact of optical DC leakage in upstream burst-mode coherent TDM-PON systems. In upstream burst transmission, the laser remains on to avoid wavelength drift even when the optical network unit (ONU) is inactive, leading to the generation of residual DC leakage caused by a limited modulator extinction ratio and bias drift from the null point. As the number of ONUs increases, the accumulated optical DC leakage becomes large. In a more extreme case, where the optical signal comes from a distant ONU and all the other inactive ONUs are located close to the optical line terminal, the accumulated DC power can even exceed the signal power, resulting in SNR degradation and increased quantization noise. To address these challenges, we propose a flipped-frequency heterodyne detection scheme combined with SCM signaling. This approach upconverts the DC tones from low-frequency regions to high-frequency regions, allowing DC leakage to be effectively filtered out by the bandwidth-limited receiver before analog-to-digital conversion. As a proof of concept, we analyze the impact of DC leakage in both the time and frequency domains, compare the DC tolerance of PAM and SCM under different detection schemes, and support our findings with both simulation and experimental results. Finally, a 200G upstream simplified coherent TDM-PON system is experimentally demonstrated, showing up to 18 dB improvement in DC leakage tolerance compared to a baseband PAM4 signal at the 29 dB N1 class loss budget.
- 11 September 2025
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 18  (1) , A9-A18
Simplified coherent TDM-PON in upstream burst-mode detection with enhanced DC leakage tolerance
This paper investigates the generation and impact of optical DC leakage in upstream burst-mode coherent TDM-PON systems. In upstream burst transmission, the laser remains on to avoid wavelength drift even when the optical network unit (ONU) is inactive, leading to the generation of residual DC leakage caused by a limited modulator extinction ratio and bias drift from the null point. As the number of ONUs increases, the accumulated optical DC leakage becomes large. In a more extreme case, where the optical signal comes from a distant ONU and all the other inactive ONUs are located close to the optical line terminal, the accumulated DC power can even exceed the signal power, resulting in SNR degradation and increased quantization noise. To address these challenges, we propose a flipped-frequency heterodyne detection scheme combined with SCM signaling. This approach upconverts the DC tones from low-frequency regions to high-frequency regions, allowing DC leakage to be effectively filtered out by the bandwidth-limited receiver before analog-to-digital conversion. As a proof of concept, we analyze the impact of DC leakage in both the time and frequency domains, compare the DC tolerance of PAM and SCM under different detection schemes, and support our findings with both simulation and experimental results. Finally, a 200G upstream simplified coherent TDM-PON system is experimentally demonstrated, showing up to 18 dB improvement in DC leakage tolerance compared to a baseband PAM4 signal at the 29 dB N1 class loss budget.
- 29 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43  (23) , 10456-10469
Partial Transmit Subcarrier Technology Based on m-Sequence for Simplified PAPR Reduction in 400G TFDM Coherent PON
Coherent passive optical networks (CPONs) are emerging as a promising solution for future 200G and even 400G optical access network. Recently, time-frequency division multiplexing (TFDM) PON has been proposed as a solution to the flexibility challenge in CPON, providing more flexible bandwidth allocation for downstream access. Implementing TFDM PON through digital subcarrier multiplexing is a simple and efficient approach, but it increases the peak-to-average power ratio (PAPR) of the transmitted signal, thereby reducing the overall power budget due to the peak power constraints of digital-to-analog converters (DACs), and this issue worsens as the number of subcarriers increases. In our previous work, we proposed the Partial Transmit Subcarrier (PTSC) technique, which reduces PAPR in TFDM PON systems through subcarrier phase rotation. In this work, we propose an m-sequence-based PTSC (m-PTSC) scheme that optimizes phase factor selection to reduce computational complexity. For 4- and 8-subcarrier systems, the proposed method reduces the number of phase factors by 93.75% and 99.90%, respectively. Experimental validation in a 400-Gbps TFDM PON system shows that m-PTSC reduces PAPR by 2.9 dB and improves the power budget by 0.95 dB in the 4-subcarrier system, while in the 8-subcarrier system, m-PTSC achieves a 5.5-dB PAPR reduction and a 2.14-dB power budget improvement, all with only 0.6% protection overhead and pilot.
- 29 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43  (23) , 10456-10469
Partial Transmit Subcarrier Technology Based on m-Sequence for Simplified PAPR Reduction in 400G TFDM Coherent PON
Coherent passive optical networks (CPONs) are emerging as a promising solution for future 200G and even 400G optical access network. Recently, time-frequency division multiplexing (TFDM) PON has been proposed as a solution to the flexibility challenge in CPON, providing more flexible bandwidth allocation for downstream access. Implementing TFDM PON through digital subcarrier multiplexing is a simple and efficient approach, but it increases the peak-to-average power ratio (PAPR) of the transmitted signal, thereby reducing the overall power budget due to the peak power constraints of digital-to-analog converters (DACs), and this issue worsens as the number of subcarriers increases. In our previous work, we proposed the Partial Transmit Subcarrier (PTSC) technique, which reduces PAPR in TFDM PON systems through subcarrier phase rotation. In this work, we propose an m-sequence-based PTSC (m-PTSC) scheme that optimizes phase factor selection to reduce computational complexity. For 4- and 8-subcarrier systems, the proposed method reduces the number of phase factors by 93.75% and 99.90%, respectively. Experimental validation in a 400-Gbps TFDM PON system shows that m-PTSC reduces PAPR by 2.9 dB and improves the power budget by 0.95 dB in the 4-subcarrier system, while in the 8-subcarrier system, m-PTSC achieves a 5.5-dB PAPR reduction and a 2.14-dB power budget improvement, all with only 0.6% protection overhead and pilot.
- 19 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43  (17) , 8040-8049
Preamble Design for Online IQ-Skew Estimation in Upstream 400G Coherent TFDM-PON
An online calibration method based on burst-mode digital signal processing (DSP) is proposed to solve the transceiver In-phase and quadrature (IQ) skew problem in the upstream system of 400G time frequency division multiplexing passive optical network (TFDM-PON). In traditional coherent PON, IQ skew can cause image frequency crosstalk, which seriously affects the system performance, especially in the scenario of multi-user subcarrier power imbalance. By designing a training sequence that simultaneously enables frame detection, one-tap SOP estimation, timing recovery, and frequency offset estimation (FOE), the proposed scheme also achieves online estimation and compensation of transceiver IQ skew. The experiment verifies the effectiveness of this method in three typical subcarrier allocation scenarios (single ONU four subcarriers, dual ONU two subcarriers each, and asymmetric subcarrier allocation). The results show that the transceiver IQ skew estimation error can be controlled within ±0.3 ps, and the sensitivity of 400G TFDM-PON system with 16-QAM signal after compensation reaches −28 dBm after 50-km fiber transmission. In addition, after calibrating the transceiver according to the estimated value of the proposed scheme, the sensitivity penalty of transceiver IQ skew under subcarrier power imbalance in 400G TFDM PON is explored. This work provides a feasible solution for online calibration of future high-speed coherent access networks.
- 19 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43  (17) , 8040-8049
Preamble Design for Online IQ-Skew Estimation in Upstream 400G Coherent TFDM-PON
An online calibration method based on burst-mode digital signal processing (DSP) is proposed to solve the transceiver In-phase and quadrature (IQ) skew problem in the upstream system of 400G time frequency division multiplexing passive optical network (TFDM-PON). In traditional coherent PON, IQ skew can cause image frequency crosstalk, which seriously affects the system performance, especially in the scenario of multi-user subcarrier power imbalance. By designing a training sequence that simultaneously enables frame detection, one-tap SOP estimation, timing recovery, and frequency offset estimation (FOE), the proposed scheme also achieves online estimation and compensation of transceiver IQ skew. The experiment verifies the effectiveness of this method in three typical subcarrier allocation scenarios (single ONU four subcarriers, dual ONU two subcarriers each, and asymmetric subcarrier allocation). The results show that the transceiver IQ skew estimation error can be controlled within ±0.3 ps, and the sensitivity of 400G TFDM-PON system with 16-QAM signal after compensation reaches −28 dBm after 50-km fiber transmission. In addition, after calibrating the transceiver according to the estimated value of the proposed scheme, the sensitivity penalty of transceiver IQ skew under subcarrier power imbalance in 400G TFDM PON is explored. This work provides a feasible solution for online calibration of future high-speed coherent access networks.