HLHongxiao Li

Hongxiao Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hongxiao Li has a total of 17 co-authors. Here are the top co-authors by number of shared publications:

  • Hao Xu

    School of Physics, University of Electronic Science and Technology of China 1 , Chengdu 611731

    2 shared publications
  • Hui Su

    Key Laboratory of Optoelectronic Materials Chemistry and Physics, Collaborative Innovation Center for Optoelectronic Semiconductors and Efficient Devices, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Science, Fuzhou 350002, People’s Republic of China

    2 shared publications
  • Jinchuan Zhang

    Chinese Academy of Sciences

    2 shared publications
  • Shan Niu

    Key Laboratory of Semiconductor Materials Science, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083, China

    2 shared publications
  • Zizhuo Liu

    University of Electronic Science and Technology of China

    2 shared publications
  • Anlan Chen

    Laboratory of Optoelectronic Materials Chemistry and Physics, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou 350002, China

    1 shared publication

Latest Publications

  • Open Access

    Tapered Quantum Cascade Laser Achieving Low Divergence Angle and High Output Power

    by Zizhuo Liu, Hongxiao Li, Jiagang Chen, Anlan Chen, Shan Niu, Changlei Wu, Yongqiang Sun, Xingli Zhong, Hui Su, Hao Xu, et al.

    In this work, we present a high-performance tapered quantum cascade laser (QCL) designed to achieve both high output power and low divergence angle. By integrating a tapered waveguide with a Fabry–Perot structure, significant improvements of tapered QCL devices in both output power and beam quality are demonstrated. The optimized 50 µm wide tapered QCL achieved a maximum output power of 2.76 W in pulsed operation with a slope efficiency of 3.52 W/A and a wall-plug efficiency (WPE) of 16.2%, while reducing the divergence angle to 13.01°. The device maintained a maximum power of 1.34 W with a WPE exceeding 8.2%, measured under room temperature and continuous wave (CW) operation. Compared to non-tapered Fabry–Perot QCLs, the tapered devices exhibited a nearly 10-fold increase in output power and over 200% improvement in WPE. This work provides a promising pathway for advancing mid-infrared laser technology, particularly for applications requiring high power, low divergence, and temperature stability.

  • Open Access

    Wavelength-Stable Metal Grating Distributed Feedback Quantum Cascade Laser Emitting at λ ~ 7.2 μm

    by Kedi Ma, Zizhuo Liu, Fengmin Cheng, Pengchang Yang, Hongxiao Li, Shan Niu, Gaohui Ge, Hao Xu, Ning Zhuo, Hui Su, et al.

    In this research, we demonstrate a wavelength-stable continuous wave (CW) distributed feedback (DFB) quantum cascade laser (QCL) emitting at 7.2 μm using a surface metal grating approach without epitaxial regrowth. The deep metal grating provides an appropriate DFB coupling coefficient and enhanced thermal extraction, resulting in improved lasing performance and the realization of impressive wavelength stability. Quantitatively, the temperature tuning coefficient of the single-mode emission is only 0.54 nm/°C from 20 °C to 70 °C, and the current tuning coefficient of the single-mode emission is 3.2 nm/A from 1.0 A to 1.6 A. A DFB-QCL with a 2 mm cavity length exhibits a low threshold current of 0.6 A and a power of 1.1 W with a slope efficiency of 1 W/A in the CW mode at 300 K. A single-mode operation with a side mode suppression ratio of 33 dB and a single-lobed far-field without beam steering is obtained in the working temperature range of 20–70 °C The improved wavelength stability using a deep surface metal grating approach promises simplified fabrication, which is meaningful for the commercial applications of QCLs.