Olena Chubina
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Olena Chubina has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Volodymyr Kislyakov
Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine
5 shared publications О.а. Чубіна
Дніпровський державний технічний університет, м. Кам’янське
5 shared publications- Mykola Rudenko
Дніпровський державний технічний університет (Кам’янське, Україна)
4 shared publications - Ye. M. Sigarev
Dniprovsky State Technical University (Kamianske, Ukraine)
4 shared publications - Mikhail Kashcheev
Dniprovsky State Technical University (Kamianske, Ukraine)
3 shared publications - Rodion Rudenko
Дніпровський державний технічний університет, м. Кам'янське
3 shared publications
Latest Publications
- 4 June 2025
- Published by Dniprovsk State Technical University in Collection of scholarly papers of Dniprovsk State Technical University (Technical Sciences)
- Vol. 1 (46) , 19-27
STUDY OF THE EFFICIENCY OF USE OF CONVERTER SLAG IN THE AGGLOMERATION CHARGE
The article raises a question related to the need to increase the use of secondary raw materials — final converter slags as a substitute for part of the fluxes and iron-containing materials (iron ore and concentrates), which will contribute to reducing the ecological burden on the environment, the volume of their accumulation as part of man-made deposits and implementation of the concept of a closed-cycle economy within the framework of the decisions of the UN climate summit (2019) and the European Commission on ensuring carbon neutrality of Europe by 2050 (Green Deal or "green course") in the direction of reducing the use of fossil coal. For the raw material conditions of agglomerate production, a technology of agglomerate production is proposed, which includes the uniform laying of carbonate flux on the "bed" before loading the charge, while loading the charge onto the grate grates is carried out simultaneously with the formation of the "bed". The "bed" formed in this way is a layer of fluxes with a fractional composition of materials between 0.050 m and a value exceeding the cross section between the grates of the spical carts. The results of research on the use of converter slag as components of agglomeration charge are presented. There is a well-founded possibility of returning its main components СаО, FeO, Fe2O3, MgO, Al2O3, MnO in the cycle of metallurgical production. The peculiarities of the formation of interlayers of the sintering charge with different modulus of basicity due to the introduction of converter slag with the dimensions of the specified range into the charge without using an additional tract of preparation of the charge have been established; dependence of the specific consumption of solid fuel, the output of the reverse fraction of agglomerate and the productivity of the sintering machine on the fractional composition of the converter slag particles loaded on the sintering carts of the sintering machine according to the proposed technology with a rational vertical distribution of materials along the section of the charge. Transferring part of the CaO-containing materials to the lower part of the charge layer can ensure a more rational use of heat from the combustion of solid fuel in the upper part of the charge layer on the sintering cart of the sintering machine.
- 4 June 2025
- Published by Dniprovsk State Technical University in Collection of scholarly papers of Dniprovsk State Technical University (Technical Sciences)
- Vol. 1 (46) , 19-27
STUDY OF THE EFFICIENCY OF USE OF CONVERTER SLAG IN THE AGGLOMERATION CHARGE
The article raises a question related to the need to increase the use of secondary raw materials — final converter slags as a substitute for part of the fluxes and iron-containing materials (iron ore and concentrates), which will contribute to reducing the ecological burden on the environment, the volume of their accumulation as part of man-made deposits and implementation of the concept of a closed-cycle economy within the framework of the decisions of the UN climate summit (2019) and the European Commission on ensuring carbon neutrality of Europe by 2050 (Green Deal or "green course") in the direction of reducing the use of fossil coal. For the raw material conditions of agglomerate production, a technology of agglomerate production is proposed, which includes the uniform laying of carbonate flux on the "bed" before loading the charge, while loading the charge onto the grate grates is carried out simultaneously with the formation of the "bed". The "bed" formed in this way is a layer of fluxes with a fractional composition of materials between 0.050 m and a value exceeding the cross section between the grates of the spical carts. The results of research on the use of converter slag as components of agglomeration charge are presented. There is a well-founded possibility of returning its main components СаО, FeO, Fe2O3, MgO, Al2O3, MnO in the cycle of metallurgical production. The peculiarities of the formation of interlayers of the sintering charge with different modulus of basicity due to the introduction of converter slag with the dimensions of the specified range into the charge without using an additional tract of preparation of the charge have been established; dependence of the specific consumption of solid fuel, the output of the reverse fraction of agglomerate and the productivity of the sintering machine on the fractional composition of the converter slag particles loaded on the sintering carts of the sintering machine according to the proposed technology with a rational vertical distribution of materials along the section of the charge. Transferring part of the CaO-containing materials to the lower part of the charge layer can ensure a more rational use of heat from the combustion of solid fuel in the upper part of the charge layer on the sintering cart of the sintering machine.
- 4 June 2025
- Published by Dniprovsk State Technical University in Collection of scholarly papers of Dniprovsk State Technical University (Technical Sciences)
- Vol. 1 (46) , 9-18
EVAPORATION AND DISSOLUTION OF MAGNESIUM IN MOVING BUBBLES
Desulphurization of cast iron can be performed using various reagents. For each reagent, it is important to know the physical picture of the interaction of particles with molten metal. To ensure the stable operation of the chosen technology, kinetic issues of desulphurization involving particles are of great interest. With the further development of technological methods for desulphurization of cast iron and their improvement, new issues arise that require theoretical analysis and numerical estimates of both the entire process and its details The aim of this work is to study the kinetics of the desulphurization process involving magnesium particles. The problem was formulated to mathematically describe the bubble motion taking into account the bubble radius, surface tension coefficient, liquid metal density, gas density, hydraulic pressure, and mass transfer conditions in the melt. The results of calculations for the variants showing the curves of bubble rise with a magnesium particle with a radius of 1 mm are presented. It is shown that the vaporization process depends on the boundary condition, i.e., on the concentration of magnesium in the depth of the metal. The mass of vapor in the bubble and the change in the bubble radius during the ascent were estimated. The calculations have shown the dynamics of formation and behavior of relatively small bubbles of a mixture of carrier gas and magnesium vapor moving in molten iron. It is shown that rapid evaporation of magnesium, which leads to an increase in the radii of the bubbles that pop up, as well as their rapid collapse, is associated with the dissolution of vapors in liquid metal. This behavior is typical for the initial stage of the desulfurization process, when the concentration of magnesium in the metal is almost zero. For the case of a relatively high concentration (the final stage of the process), the effect of returning dissolved magnesium to the bubble is possible, because the partial pressure of magnesium vapor in the bubble may be lower than the required value. This interesting feature is related to both the concentration of magnesium vapor in the bubble itself and the conditions in the liquid metal. Thus, the presented kinetic model shows the physicochemical course of the process of magnesium flow from bubbles into molten metal during the treatment of cast iron with granular magnesium. The obtained calculation results are of practical value for the development of the technology in industrial conditions.
- 4 June 2025
- Published by Dniprovsk State Technical University in Collection of scholarly papers of Dniprovsk State Technical University (Technical Sciences)
- Vol. 1 (46) , 9-18
EVAPORATION AND DISSOLUTION OF MAGNESIUM IN MOVING BUBBLES
Desulphurization of cast iron can be performed using various reagents. For each reagent, it is important to know the physical picture of the interaction of particles with molten metal. To ensure the stable operation of the chosen technology, kinetic issues of desulphurization involving particles are of great interest. With the further development of technological methods for desulphurization of cast iron and their improvement, new issues arise that require theoretical analysis and numerical estimates of both the entire process and its details The aim of this work is to study the kinetics of the desulphurization process involving magnesium particles. The problem was formulated to mathematically describe the bubble motion taking into account the bubble radius, surface tension coefficient, liquid metal density, gas density, hydraulic pressure, and mass transfer conditions in the melt. The results of calculations for the variants showing the curves of bubble rise with a magnesium particle with a radius of 1 mm are presented. It is shown that the vaporization process depends on the boundary condition, i.e., on the concentration of magnesium in the depth of the metal. The mass of vapor in the bubble and the change in the bubble radius during the ascent were estimated. The calculations have shown the dynamics of formation and behavior of relatively small bubbles of a mixture of carrier gas and magnesium vapor moving in molten iron. It is shown that rapid evaporation of magnesium, which leads to an increase in the radii of the bubbles that pop up, as well as their rapid collapse, is associated with the dissolution of vapors in liquid metal. This behavior is typical for the initial stage of the desulfurization process, when the concentration of magnesium in the metal is almost zero. For the case of a relatively high concentration (the final stage of the process), the effect of returning dissolved magnesium to the bubble is possible, because the partial pressure of magnesium vapor in the bubble may be lower than the required value. This interesting feature is related to both the concentration of magnesium vapor in the bubble itself and the conditions in the liquid metal. Thus, the presented kinetic model shows the physicochemical course of the process of magnesium flow from bubbles into molten metal during the treatment of cast iron with granular magnesium. The obtained calculation results are of practical value for the development of the technology in industrial conditions.
- 24 December 2024
- Published by Dniprovsk State Technical University in Collection of scholarly papers of Dniprovsk State Technical University (Technical Sciences)
- Vol. 2 (45) , 9-18
COMPARATIVE ANALYSIS OF REAGENTS FOR COMPLEX TREATMENT OF CAST IRON
The aim of this work is to summarize the results of using various reagents for the comprehensive removal of impurities from molten cast iron. A comparative analysis of the effectiveness of different reagents for cast iron refining was conducted. The use of soda slag as a reagent was tested at the industrial level in a 140-ton hot metal ladle, and the results of experimental treatments were presented. A technology for comprehensive cast iron refining using the CaO-FeO-Na2CO3 reagent system was considered, which is based on the interaction of these components with molten cast iron. Possible chemical transformations occurring during the introduction of these reagents were described, including desulfurization reactions, oxidation, and the removal of harmful impurities. Based on laboratory studies using a "hot" model, an analysis of impurity behavior was conducted, and influence maps of the reagents' components on phosphorus, sulfur, and silicon removal were constructed. Additionally, ternary phase diagrams for the CaO-FeO-Na2CO3 system were developed, which helped to determine optimal conditions for comprehensive cast iron refining. The results of an industrial test of soda ash as a reagent for complex cast iron refining confirmed that this material is effective for the simultaneous removal of sulfur, silicon and phosphorus under certain conditions. Laboratory and industrial studies have shown that a multi-stage impurity removal process during the out-of-furnace cast iron treatment — oxygen converter shop process link is an effective approach for comprehensive cast iron refining. In particular, at the out-of-furnace treatment stage, effective sulfur removal is achieved by using desulphurization reagents, followed by additional silicon and phosphorus removal at the BOF stage. The use of sodium carbonate (Na2CO3) in combination with other reagents such as CaO and FeO has shown significant potential for complex cast iron refining. The combinations of these components have demonstrated high efficiency in removing both sulfur and phosphorus, which allows optimizing the technological process of cast iron refining. Other reagents or technological solutions may be required to achieve a higher degree of silicon removal at the out-of-furnace iron treatment stage. The analysis of the behavior of impurities and chemical reactions during the treatment process shows that the introduction of additional reducing agents, such as aluminum, can help reduce the negative impact of CO2 and increase the efficiency of impurity removal. The constructed mapping and state diagrams demonstrated that changing the proportions of the components of the CaO-FeO-Na2CO3 system allows achieving different degrees of sulfur, silicon, and phosphorus removal, which makes it possible to select the optimal composition of the refining mixture for each specific case. The research results show that the CaO-FeO-Na2CO3-Al mixture is suitable for complex cast iron refining under laboratory test conditions and can be effectively used for the simultaneous removal of several harmful impurities. Increasing the amount of aluminum leads to a deterioration in refining performance from silicon and phosphorus.
- 24 December 2024
- Published by Dniprovsk State Technical University in Collection of scholarly papers of Dniprovsk State Technical University (Technical Sciences)
- Vol. 2 (45) , 9-18
COMPARATIVE ANALYSIS OF REAGENTS FOR COMPLEX TREATMENT OF CAST IRON
The aim of this work is to summarize the results of using various reagents for the comprehensive removal of impurities from molten cast iron. A comparative analysis of the effectiveness of different reagents for cast iron refining was conducted. The use of soda slag as a reagent was tested at the industrial level in a 140-ton hot metal ladle, and the results of experimental treatments were presented. A technology for comprehensive cast iron refining using the CaO-FeO-Na2CO3 reagent system was considered, which is based on the interaction of these components with molten cast iron. Possible chemical transformations occurring during the introduction of these reagents were described, including desulfurization reactions, oxidation, and the removal of harmful impurities. Based on laboratory studies using a "hot" model, an analysis of impurity behavior was conducted, and influence maps of the reagents' components on phosphorus, sulfur, and silicon removal were constructed. Additionally, ternary phase diagrams for the CaO-FeO-Na2CO3 system were developed, which helped to determine optimal conditions for comprehensive cast iron refining. The results of an industrial test of soda ash as a reagent for complex cast iron refining confirmed that this material is effective for the simultaneous removal of sulfur, silicon and phosphorus under certain conditions. Laboratory and industrial studies have shown that a multi-stage impurity removal process during the out-of-furnace cast iron treatment — oxygen converter shop process link is an effective approach for comprehensive cast iron refining. In particular, at the out-of-furnace treatment stage, effective sulfur removal is achieved by using desulphurization reagents, followed by additional silicon and phosphorus removal at the BOF stage. The use of sodium carbonate (Na2CO3) in combination with other reagents such as CaO and FeO has shown significant potential for complex cast iron refining. The combinations of these components have demonstrated high efficiency in removing both sulfur and phosphorus, which allows optimizing the technological process of cast iron refining. Other reagents or technological solutions may be required to achieve a higher degree of silicon removal at the out-of-furnace iron treatment stage. The analysis of the behavior of impurities and chemical reactions during the treatment process shows that the introduction of additional reducing agents, such as aluminum, can help reduce the negative impact of CO2 and increase the efficiency of impurity removal. The constructed mapping and state diagrams demonstrated that changing the proportions of the components of the CaO-FeO-Na2CO3 system allows achieving different degrees of sulfur, silicon, and phosphorus removal, which makes it possible to select the optimal composition of the refining mixture for each specific case. The research results show that the CaO-FeO-Na2CO3-Al mixture is suitable for complex cast iron refining under laboratory test conditions and can be effectively used for the simultaneous removal of several harmful impurities. Increasing the amount of aluminum leads to a deterioration in refining performance from silicon and phosphorus.
- Open Access
- 3 December 2024
- Published by Dniprovsk State Technical University in Collection of scholarly papers of Dniprovsk State Technical University (Technical Sciences)
- p. 89-97
DIFFUSION-KINETIC MODEL OF DISSOLUTION OF MAGNESIUM VAPOR IN A MELT DURING BUBBLE MOTION IN THE REGIME OF CHEMICAL LOCAL EQUILIBRIUM OF MAGNESIUM AND SULFUR
The aim of the work is to examine the diffusion-kinetic dissolution of magnesium from a moving bubble into the melt, taking into account changes in its parameters under local chemical equilibrium. A mathematical description of the diffusion process is provided. The results of calculations are presented for a bubble rising from a depth of 2 meters in the melt at temperatures of 1300°C and 1400°C, under conditions where the sulfur concentration is 0.05% (initial stage of the process) and 0.002% (deep desulfurization mode). The dependencies of bubble radius changes during their ascent in the melt, the changes in the depth of bubble rise, magnesium concentration on their surface, as well as the changes in the mass of magnesium in the bubbles at metal temperatures of 1300°C and 1400°C, are analyzed. A mathematical model for the dissolution of moving magnesium vapor bubbles in the melt is developed, taking into account the chemical equilibrium of sulfur and magnesium concentrations in the metal. The proposed mathematical model provides a theoretical estimate of magnesium vapor losses.
- 3 December 2024
- Published by Dniprovsk State Technical University in Collection of scholarly papers of Dniprovsk State Technical University (Technical Sciences)
- p. 89-97
Open AccessDIFFUSION-KINETIC MODEL OF DISSOLUTION OF MAGNESIUM VAPOR IN A MELT DURING BUBBLE MOTION IN THE REGIME OF CHEMICAL LOCAL EQUILIBRIUM OF MAGNESIUM AND SULFUR
The aim of the work is to examine the diffusion-kinetic dissolution of magnesium from a moving bubble into the melt, taking into account changes in its parameters under local chemical equilibrium. A mathematical description of the diffusion process is provided. The results of calculations are presented for a bubble rising from a depth of 2 meters in the melt at temperatures of 1300°C and 1400°C, under conditions where the sulfur concentration is 0.05% (initial stage of the process) and 0.002% (deep desulfurization mode). The dependencies of bubble radius changes during their ascent in the melt, the changes in the depth of bubble rise, magnesium concentration on their surface, as well as the changes in the mass of magnesium in the bubbles at metal temperatures of 1300°C and 1400°C, are analyzed. A mathematical model for the dissolution of moving magnesium vapor bubbles in the melt is developed, taking into account the chemical equilibrium of sulfur and magnesium concentrations in the metal. The proposed mathematical model provides a theoretical estimate of magnesium vapor losses.
- Open Access
- 3 December 2024
- Published by Dniprovsk State Technical University in Collection of scholarly papers of Dniprovsk State Technical University (Technical Sciences)
- p. 98-110
REDUCTION OF IRON CONSUMPTION IN STEEL PRODUCTION IN CONVERTER SHOPS: MODERN APPROACHES AND SOLUTIONS
The article examines modern approaches and technological solutions aimed at reducing the cost of iron in the production of steel in converter shops. One of the key issues in the metallurgical industry is the optimization of raw material costs while simultaneously improving the quality of final products. In the conditions of growing competition on the market and increasing the cost of raw materials, the issue of reducing iron consumption in the steel production process becomes especially important. The purpose of the study is to substantiate effective technological methods of reducing the cost of cast iron while maintaining high technical and operational characteristics of steel. The work considers several directions for achieving this goal, in particular: improvement of the quality of raw materials through preliminary processing of scrap metal, modernization of converter equipment, optimization of oxygen purging modes, use of technologies of secondary processing of scrap metal, as well as the use of various technological additives and slag-forming materials. Special attention is paid to the possibilities of reducing energy consumption and increasing production efficiency through the use of scrap metal heating technologies.During the study, examples of the introduction of modern technologies at leading metallurgical enterprises, such as ArcelorMittal, ThyssenKrupp, Voestalpine and others, were considered. These technologies help to reduce the costs of raw materials and energy resources, which has a positive effect on the environmental indicators of production and the overall sustainability of metallurgical enterprises. An analysis of the use of carbon-containing materials, both in lump and powder forms, was also carried out to reduce the consumption of cast iron and increase the proportion of metal scrap in the metal charge. The question of the influence of such additives on the chemical composition of steel is considered. It was determined that the use of carbon-containing materials allows to significantly reduce the consumption of cast iron, however, it is necessary to take into account the influence of such factors as the composition of raw materials, the temperature in the converter and the parameters of adding carbon-containing materials during oxygen purging.The given results can be useful for enterprises of the metallurgical industry seeking to increase the efficiency of their production processes. The study demonstrates that the introduction of new technologies and approaches can provide a significant reduction in pig iron costs, increase the quality of steel and reduce the negative impact on the environment. The described methods have the potential for wide use in metallurgy, which will increase the competitiveness of Ukrainian enterprises on the international market.
- 3 December 2024
- Published by Dniprovsk State Technical University in Collection of scholarly papers of Dniprovsk State Technical University (Technical Sciences)
- p. 98-110
Open AccessREDUCTION OF IRON CONSUMPTION IN STEEL PRODUCTION IN CONVERTER SHOPS: MODERN APPROACHES AND SOLUTIONS
The article examines modern approaches and technological solutions aimed at reducing the cost of iron in the production of steel in converter shops. One of the key issues in the metallurgical industry is the optimization of raw material costs while simultaneously improving the quality of final products. In the conditions of growing competition on the market and increasing the cost of raw materials, the issue of reducing iron consumption in the steel production process becomes especially important. The purpose of the study is to substantiate effective technological methods of reducing the cost of cast iron while maintaining high technical and operational characteristics of steel. The work considers several directions for achieving this goal, in particular: improvement of the quality of raw materials through preliminary processing of scrap metal, modernization of converter equipment, optimization of oxygen purging modes, use of technologies of secondary processing of scrap metal, as well as the use of various technological additives and slag-forming materials. Special attention is paid to the possibilities of reducing energy consumption and increasing production efficiency through the use of scrap metal heating technologies.During the study, examples of the introduction of modern technologies at leading metallurgical enterprises, such as ArcelorMittal, ThyssenKrupp, Voestalpine and others, were considered. These technologies help to reduce the costs of raw materials and energy resources, which has a positive effect on the environmental indicators of production and the overall sustainability of metallurgical enterprises. An analysis of the use of carbon-containing materials, both in lump and powder forms, was also carried out to reduce the consumption of cast iron and increase the proportion of metal scrap in the metal charge. The question of the influence of such additives on the chemical composition of steel is considered. It was determined that the use of carbon-containing materials allows to significantly reduce the consumption of cast iron, however, it is necessary to take into account the influence of such factors as the composition of raw materials, the temperature in the converter and the parameters of adding carbon-containing materials during oxygen purging.The given results can be useful for enterprises of the metallurgical industry seeking to increase the efficiency of their production processes. The study demonstrates that the introduction of new technologies and approaches can provide a significant reduction in pig iron costs, increase the quality of steel and reduce the negative impact on the environment. The described methods have the potential for wide use in metallurgy, which will increase the competitiveness of Ukrainian enterprises on the international market.
- 3 December 2024
- Published by Dniprovsk State Technical University in Collection of scholarly papers of Dniprovsk State Technical University (Technical Sciences)
- p. 123-131
USE OF PULVERIZED COAL FUEL FOR PREHEATING SCRAP
Preheating of scrap in the converter is an actual area of research in modern metallurgy. The growing requirements for energy efficiency and the reduction of raw material costs encourage the development of new technological solutions to increase the share of scrap metal in the charge of converter production. Traditional methods are often limited to the use of no more than 25% of scrap, which is associated with difficulties in its uniform heating and the possible formation of a liquid phase as a result of local overheating. The work evaluates the effectiveness of traditional and experimental technological solutions, such as two-tier and fuel-oxygen nozzles. The stages of ignition and burning of lump coal and pulverized coal fuel and their influence on the uniformity of scrap heating were studied. Experimental studies have shown that with a specific oxygen consumption of 1-1.35 m³/kg of pulverized coal fuel, uniform heating of scrap metal is ensured without the risk of melting the upper layers. During the use of a fuel-oxygen lance, the following features of heating scrap metal using pulverized coal fuel, which was blown in an oxygen ring shell, were discovered: - during the combustion of coal dust in an oxygen environment, due to the significant total surface of coal particles, the bulk of volatile СmНn does not have time to separate before the beginning particle ignition, and carbon burns at the same rate as volatiles. This contributes to the formation of high-temperature torches with great luminosity, which effectively affect the surface of the scrap; - the coefficient of use of blown oxygen and pulverized coal fuel is significantly higher than when using lump gas coal during heating of any duration. This is due to the greater luminosity of the formed torches, which contributes to the intensive absorption of thermal energy by the surface of the scrap; - the time required to heat the surface of the scrap metal to the specified temperature is reduced, which allows you to avoid the formation of a liquid component that can lead to undesirable consequences, such as uneven heating or damage to the converter lining. Based on the results of experimental studies, the relationship between the specific oxygen consumption and the flame temperature was established. The ability to control the temperature regime during the heating of scrap metal indicates the prospects of using a fuel-oxygen nozzle made of PVP to optimize the converter production process. For the full implementation of the technology, additional research and industrial testing are needed to optimize processes and increase production efficiency.
- 3 December 2024
- Published by Dniprovsk State Technical University in Collection of scholarly papers of Dniprovsk State Technical University (Technical Sciences)
- p. 123-131
USE OF PULVERIZED COAL FUEL FOR PREHEATING SCRAP
Preheating of scrap in the converter is an actual area of research in modern metallurgy. The growing requirements for energy efficiency and the reduction of raw material costs encourage the development of new technological solutions to increase the share of scrap metal in the charge of converter production. Traditional methods are often limited to the use of no more than 25% of scrap, which is associated with difficulties in its uniform heating and the possible formation of a liquid phase as a result of local overheating. The work evaluates the effectiveness of traditional and experimental technological solutions, such as two-tier and fuel-oxygen nozzles. The stages of ignition and burning of lump coal and pulverized coal fuel and their influence on the uniformity of scrap heating were studied. Experimental studies have shown that with a specific oxygen consumption of 1-1.35 m³/kg of pulverized coal fuel, uniform heating of scrap metal is ensured without the risk of melting the upper layers. During the use of a fuel-oxygen lance, the following features of heating scrap metal using pulverized coal fuel, which was blown in an oxygen ring shell, were discovered: - during the combustion of coal dust in an oxygen environment, due to the significant total surface of coal particles, the bulk of volatile СmНn does not have time to separate before the beginning particle ignition, and carbon burns at the same rate as volatiles. This contributes to the formation of high-temperature torches with great luminosity, which effectively affect the surface of the scrap; - the coefficient of use of blown oxygen and pulverized coal fuel is significantly higher than when using lump gas coal during heating of any duration. This is due to the greater luminosity of the formed torches, which contributes to the intensive absorption of thermal energy by the surface of the scrap; - the time required to heat the surface of the scrap metal to the specified temperature is reduced, which allows you to avoid the formation of a liquid component that can lead to undesirable consequences, such as uneven heating or damage to the converter lining. Based on the results of experimental studies, the relationship between the specific oxygen consumption and the flame temperature was established. The ability to control the temperature regime during the heating of scrap metal indicates the prospects of using a fuel-oxygen nozzle made of PVP to optimize the converter production process. For the full implementation of the technology, additional research and industrial testing are needed to optimize processes and increase production efficiency.
- 1 January 2024
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metal and Casting of Ukraine
- Vol. 32 (2)
Improving the efficiency of the preparation of agglomeration charge
Improving the efficiency of averaging of agglomeration charges containing finely dispersed materials and reducing fluctuations in the chemical composition of the agglomerate is an actual topic since sintering plants do not have enough equipment for the complete preparation of the agglomeration charge, namely averaging. In addition, the supply of finely dispersed components of iron ore concentrate and iron-containing sludge to the warehouse for averaging and the processes of stack formation and disassembly are accompanied by disorganized structure formation. Solving this issue will improve agglomerate quality and increase agglomeration machines' productivity. A method of preparing agglomeration charge is proposed. This method involves averaging the mixture after equalizing its granulometric composition, which minimizes material segregation during stack formation and disassembly. The leveling of the granulometric composition of the mixture is carried out by processing it in mixers at natural humidity, which leads to the destruction of locally over-moistened micro volumes of sludge and concentrate and finishing the mixture at optimal humidity, which contributes to the preferential formation of granules of class 1.6...10.0 mm. A component for crushing is added to the mixture in the amount of 10 ...40 % of the weight of the mixture to intensify the process of crushing in the mixer. Granulation of the charge before averaging and storage in the warehouse contributes to eliminating the phenomenon of caking, the unorganized formation of macrostructures in the process of loading the material. This ultimately improves the quality of the agglomerate in terms of strength indicators. The method will reduce fluctuations in the agglomerate's chemical composition in terms of iron content and basicity while increasing the productivity of sinter machines and strengthening the heat. Taken together, this allows us to conclude about its feasibility and the possibility of its introduction into industry.
- 1 January 2024
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metal and Casting of Ukraine
- Vol. 32 (2)
Improving the efficiency of the preparation of agglomeration charge
Improving the efficiency of averaging of agglomeration charges containing finely dispersed materials and reducing fluctuations in the chemical composition of the agglomerate is an actual topic since sintering plants do not have enough equipment for the complete preparation of the agglomeration charge, namely averaging. In addition, the supply of finely dispersed components of iron ore concentrate and iron-containing sludge to the warehouse for averaging and the processes of stack formation and disassembly are accompanied by disorganized structure formation. Solving this issue will improve agglomerate quality and increase agglomeration machines' productivity. A method of preparing agglomeration charge is proposed. This method involves averaging the mixture after equalizing its granulometric composition, which minimizes material segregation during stack formation and disassembly. The leveling of the granulometric composition of the mixture is carried out by processing it in mixers at natural humidity, which leads to the destruction of locally over-moistened micro volumes of sludge and concentrate and finishing the mixture at optimal humidity, which contributes to the preferential formation of granules of class 1.6...10.0 mm. A component for crushing is added to the mixture in the amount of 10 ...40 % of the weight of the mixture to intensify the process of crushing in the mixer. Granulation of the charge before averaging and storage in the warehouse contributes to eliminating the phenomenon of caking, the unorganized formation of macrostructures in the process of loading the material. This ultimately improves the quality of the agglomerate in terms of strength indicators. The method will reduce fluctuations in the agglomerate's chemical composition in terms of iron content and basicity while increasing the productivity of sinter machines and strengthening the heat. Taken together, this allows us to conclude about its feasibility and the possibility of its introduction into industry.
- Open Access
- 25 December 2023
- Published by Dniprovsk State Technical University in Collection of scholarly papers of Dniprovsk State Technical University (Technical Sciences)
- Vol. 2 (43) , 28-38
PROSPECTS FOR THE USE OF OUT-OF-FURNACE CAST IRON REFINING TECHNOLOGIES IN THE CONTEXT OF DOMESTIC METALLURGICAL PRODUCTION
Метою роботи є встановлення можливостей та особливостей використання різних технологій з позапічної обробки чавуну перед виплавкою сталі з урахуванням особливостей вітчизняного металургійного виробництва в сучасних умовах. Виконана загальна класифікація технічних рішень з позапічного рафінування чавуну та зроблено порівняльний аналіз ефективності розглянутих технологій. Виконано інженерні розрахунки з використанням математичних моделей матеріального та теплового балансів конвертерної плавки, адаптованих для 250-т кисневих конвертерів, при використанні верхньої фурми класичної конструкції. Проведено аналіз впливу розглянутих технічних рішень з позапічної обробки чавуну на такі основні технологічні показники конвертерної плавки Порівняння проводилося відносно до показників базової плавки без використання технологій позапічної обробки розплавів. Підтверджено доцільність використання методів позапічного рафінування на основі інжекції зернистого магнію та сумішей системи CaO-Mg. Стосовно технологій комплексного рафінування визначено, що для вітчизняних умов доцільно розробити технологію, яка передбачає видалення сірки та фосфору з розплаву без суттєвого зниження концентрації кремнію в розплаві.
- 25 December 2023
- Published by Dniprovsk State Technical University in Collection of scholarly papers of Dniprovsk State Technical University (Technical Sciences)
- Vol. 2 (43) , 28-38
Open AccessPROSPECTS FOR THE USE OF OUT-OF-FURNACE CAST IRON REFINING TECHNOLOGIES IN THE CONTEXT OF DOMESTIC METALLURGICAL PRODUCTION
Метою роботи є встановлення можливостей та особливостей використання різних технологій з позапічної обробки чавуну перед виплавкою сталі з урахуванням особливостей вітчизняного металургійного виробництва в сучасних умовах. Виконана загальна класифікація технічних рішень з позапічного рафінування чавуну та зроблено порівняльний аналіз ефективності розглянутих технологій. Виконано інженерні розрахунки з використанням математичних моделей матеріального та теплового балансів конвертерної плавки, адаптованих для 250-т кисневих конвертерів, при використанні верхньої фурми класичної конструкції. Проведено аналіз впливу розглянутих технічних рішень з позапічної обробки чавуну на такі основні технологічні показники конвертерної плавки Порівняння проводилося відносно до показників базової плавки без використання технологій позапічної обробки розплавів. Підтверджено доцільність використання методів позапічного рафінування на основі інжекції зернистого магнію та сумішей системи CaO-Mg. Стосовно технологій комплексного рафінування визначено, що для вітчизняних умов доцільно розробити технологію, яка передбачає видалення сірки та фосфору з розплаву без суттєвого зниження концентрації кремнію в розплаві.