APAtowar Rahman Prodhan

Atowar Rahman Prodhan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Atowar Rahman Prodhan has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Computational Algorithms for Early-Age Creep and Buildability Prediction in Extrusion-Based 3D Concrete Printing: A Critical Survey

    by Muhammad Adeel, Ajay Kumar, Prodhan Md Atowar Rahman, Asad Ali, Akif Khalique Kamboh

    Early-age deformation is a major limitation on the buildability of extrusion-based 3D-printed concrete because each deposited layer must carry increasing self-weight while hydration, thixotropic rebuilding, stiffness, and strength are still evolving. This survey reviews experimental, rheological, analytical, and numerical approaches used to characterize and predict creep and related deformation during printing. The reviewed experiments include compression, creep-recovery, digital image correlation, and full-scale printing tests. Analytical approaches include Burgers, generalized Kelvin, power-law, and hydration-coupled viscoelastic formulations, whereas numerical studies employ continuum finite elements, lattice and voxel activation, damage-rheology laws, particle finite elements, computational fluid dynamics, and coupled fluid-solid models. Across these approaches, predicted buildability depends strongly on material age at loading, load duration, deposition interval, layer geometry, and interface behavior. The literature shows that elastic models are useful for rapid screening, but viscoelastic, plastic, or damage mechanisms become important when printing duration is long or stress approaches the evolving resistance. Remaining priorities are standardized early-age tests, independent validation, uncertainty quantification, and transferable models that connect material characterization with layer-by-layer structural analysis.

  • Open Access

    Effect of Cement Type on Alkali Silica Reactivity of Coarse Aggregates

    by Ajay Kumar, Prodhan Md Atowar Rahman, Muhammad Asif, Jahangir Manan Achakzai

    The alkali-silica reaction (ASR) is a harmful interaction between alkaline cement paste and reactive silica in concrete aggregates, forming an expansive gel that can cause cracking and shorten the lifespan of the concrete structure. This research study examines the ASR phenomenon in local coarse aggregate with ordinary Portland cement (OPC) and sulfate-resistant cement (SRC). After 3, 7, 14, and 28 days, the 24 mortar prism samples underwent an ASTM C1260 expansion test. The results indicated that the OPC bars expanded by 0.192% to 0.48%, and the SRC bars expanded by 0.270% to 0.464%. Expansion after 14 days > 0.2% is considered high reactivity, and both cements exhibited this, indicating that the local aggregates are highly reactive per ASTM C1260. After 28 days, the SRC's performance was slightly better. The study suggests using low-alkali cement, pozzolanic materials, moisture control, and nonreactive aggregates to minimize ASR effects.

  • Open Access

    Prefabrication in Pakistan: Navigating Barriers for a Sustainable Construction Future

    by Ali Hassan, Atowar Rahman Prodhan, Muhammad Asif, Fazal E. Ahad, Shakeel Ahmad, Mst Julia Akter

    Pakistan's construction industry faces significant challenges like inefficiency, high costs, project delays, and environmental concerns due to dependability on traditional construction approaches. This research explores the adaptation of prefabrication technology in Pakistan's construction industry to help overcome some of these problems. The study employs mixed methods to investigate factors affecting prefabrication acceptance, perceived benefits, and adoption barriers. Results indicate that although prefabrication presents benefits such as lower construction duration, cost savings, and greater sustainability, challenges, including high initial cost, lack of skilled labor, and poor infrastructure, are major hindrances. The study concluded that the broad adoption of prefabrication does, however, require continued government support, primarily in the form of financial incentives and policy reform. The findings portray the impact of prefabrication, which can be utilized by construction firms to ameliorate construction efficiency, quality, and environmental sustainability in Pakistan, resulting in the improvement of the construction process in Pakistan.


  • Open Access

    Enhancing the Mechanical and Durability Properties of Burnt Clay Bricks Using Waste Glass Powder

    by Ali Hassan, Atowar Rahman Prodhan, Saydur Rahman Rayad, Zakaria, Abdullah Al Mamun, Mst Julia Akter

    The increased demand for construction materials and environmental hazards due to industrial-associated wastes provide scope for sustainable solution pathways. Hence, this study focused on determining the possibility of using waste glass powder as a replacement for clay in burnt clay bricks for improved mechanical performance and durability. According to the tests performed under ASTM, the bricks were executed for compressive strength, modulus of rupture, water absorption, apparent porosity, efflorescence resistance, and ultrasonic pulse velocity for various WGP substitutions starting from 0% and ending with 25%. The results of the tests indicated that samples with up to 20% recorded the highest increase in compressive strength and modulus of rupture of approximately 25% and 41%, respectively. Excellent results proved that WGP improved structure integrity and durability, enhancing their potential as a waste management solution as an eco-friendly additive that reduces dependence on natural clay. This study concluded that the WGP-modified bricks can be a valid replacement for sustainable construction applications. To enhance the suitability of WGP for sustainable construction, more studies must be carried out on optimizing firing parameters, long-term durability evaluation, and scaling up production processes to facilitate broader industrial adoption.


  • Open Access

    Integrating Recycled and Alternative Materials in 3D Concrete Printing for Sustainable Development

    by Atowar Rahman Prodhan, Ali Hassan, Mst Julia Akter, Asif Muhammad

    3DCP changes the face of construction. It also increases design flexibility, independence from labor, and environmental sustainability. This paper presents research based on some 3DPCs replacing conventional materials with green concrete materials, including aggregates from waste, plastic and rubber materials, recycled glass, geopolymers, and supplementary cementitious materials. These materials reduce carbon emissions and resource depletion, with properties such as tensile strength and durability similar to or better than those of ordinary concrete. Several barriers still need to be overcome, such as material variability, while mechanical anisotropy, scalability constraints, and high equipment costs are other significant factors. For 3DPC to play its full role in achieving the goals of sustainable construction, these barriers should be reduced to a minimum by mixing design optimization, standardization processes, and innovative production techniques.


  • Open Access

    Environmental and Economic Benefits of Eggshell Powder as a Cement Alternative in Concrete

    by Atowar Rahman Prodhan, Ali Hassan, Mushfiqur Rahman Neloy, Rakibul Islam, Mst Julia Akter

    Since cement production contributes to the world's CO2 emission, increased awareness of environmental concerns has driven research into greener alternatives for concrete. This paper considers eggshell powder, a waste from egg processing industries, as a supplementary cementitious material. Compressive strength tests, flexural strength, split tensile strength, workability, and durability of concrete mixed with various dosages of ESP at 0%, 5%, 10%, and 15% have been conducted after 28 days of curing. The addition of 5% ESP increased the compressive strength of concrete by 19.3% compared to the controlled mixture. Furthermore, ESP positively affected the mixes' split tensile strength and workability. Such an improvement in the properties of concrete was because of the pozzolanic reaction between ESP and Ca (OH)₂ in cement hydration, thus improving the interfacial bond between the cement paste and the aggregates. These findings suggest that ESP is a promising, greener alternative to traditional Portland cement, which would be environmentally and economically advantageous because of the reduced carbon footprint in concrete production.


  • Open Access

    Impact of Recycled Coarse Aggregates on the Mechanical Properties and Durability of Concrete

    by Nafis Sadik, Tanzina Akter, Pramisha Das Proma, Atowar Rahman Prodhan, Maysha Momotaj

    This study examines the influence of using Recycled Coarse Aggregates (RCA) on concrete mechanical and durability properties. The compressive strength, tensile strength, workability, unit weight, and water absorption of concrete mixes containing 0%, 50%, and 100% RCA were tested for different curing durations at 7 days, 14 days, and 28 days. More specifically, the outcome showed that as RCA content increased, compressive and tensile strength decreased significantly. The use of 100% RCA resulted in a decrease in compressive strength and tensile strength by 40% and 46%, respectively. The workability was reduced, and the amount of water absorbed increased to 6.70% in a 100% RCA mix. Findings show that recycled concrete aggregate can be effectively utilised as a partial replacement material only if the percentage used is less than 50%. Over this threshold, it may compromise durability, especially in high-risk conditions. The results will help to sustain the use of RCA by minimising construction waste and conserving natural resources.


  • Open Access

    Design of a Six-Story Teaching Building: A Comprehensive Approach to Safety and Structural Efficiency

    by Mithun Biswas, Prodhan Md Atowar Rahman, S. M. Chayan, Anik Md Shahjahan

    This paper describes teaching building design. The project, designed for the teaching building, prioritizes safety in its main structure, a reinforced concrete frame with six floors above ground. The story heights are 4.2m, 3.9m, 3.9m, 3.9m, 3.9m and 3.9m, respectively, and the building's total height is 27.6m. The construction site category is classified as type II, and the first group's seismic fortification intensity is 7 degrees. The process includes architectural design, structural design, and PKPM checking calculation. Architectural design mainly consists of a general description. The plan, elevation, section, and draft of the corresponding building are drawn according to the relevant information and requirements provided by the design task book. Structural design mainly includes load statistics, calculation of internal force and displacement of the frame, a combination of internal force, and calculation of staircase, slab roof, floor slab and frame structure. The calculation of displacement, internal force, and reinforcement of the whole frame structure is carried. Out using PKPM. In the course of architectural design, safety is a paramount consideration, in line with the principles of safety, applicability, beauty, economy, and energy-saving requirements, referring to national standards and relevant materials, and strictly following the requirements of relevant architectural design standards, the design of each link is not only a comprehensive scientific consideration of its own but also a related discussion with teachers, as detailed in the construction plan. The frame structure is adopted,in this structural type. It mainly includes structure layout and calculation sketch determination, load calculation, internal force calculation, internal force combination, main beam section design, and reinforcement calculation, frame column section design and reinforcement calculation, secondary beam section design and reinforcement calculation, floor and roof design, staircase design etc. Among them, the D-value method is used to calculate the internal force of the structure under horizontal load, and the distribution method is used to calculate the internal force of the structure under vertical load (dead load and live load).


  • Open Access

    Neural Network-Based Estimation of Flexural Performance for Polymer Permeable Concrete

    by Atowar Rahman Prodhan, Mst Julia Akter, Nowsad Islam, Zakaria, Muhammad Adeel, Muhammad Awaz, Shah Zaib, Muhammad Waqas Younas

    Pervious concrete is increasingly used to reduce runoff water and improve water quality near pavements and parking lots, but highway pavement structures cannot use it due to its high porosity and reduced strength. To address the issue of lower flexural strength in permeable concrete, this study designs and conducts 11 different tests with varying mix ratios. The objective is to ensure that the resulting concrete satisfies both permeability and compression resistance requirements. The uniform test method is employed to measure the flexural strength of the concrete after a period of 28 days. This study employs neural networks to analyze the flexural performance of polymer permeable concrete by considering various input factors such as cement consumption, water consumption, STA (4.75 to 9.5 mm stones), STB (9.5 to 16 mm stones), VAE (vinyl acetate-ethylene) polymer content, and SAP polymer content. The objective is to optimize the mix proportion of polymer permeable concrete and identify a suitable ratio that satisfies the requirements of pavement structural flexural performance.