Lumei Zhao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lumei Zhao has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Jie Ren
School of New Energy and Low-Carbon Industry, Wuhan Business University, Wuhan 430056, China
3 shared publications - Zuoqin Qian
School of Naval Architecture, Ocean and Energy Power Engineering, Wuhan University of Technology, Wuhan 430063, China
3 shared publications - Chen Xu
School of Mechanics and Engineering Science, Peking University, Beijing 100871, China
2 shared publications - Qiang Wang
School of Naval Architecture, Ocean and Energy Power Engineering, Wuhan University of Technology, Wuhan 430063, China
2 shared publications - Zhicheng Zhang2 shared publications
Baolin Wang
1 shared publication
Latest Publications
- Open Access
- 29 January 2025
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 67
Numerical analysis of the impact of non-contact fins on the natural convection during melting process
- 29 January 2025
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 67
Open AccessNumerical analysis of the impact of non-contact fins on the natural convection during melting process
- Open Access
Experimental Study of a Bionic Porous Media Evaporative Radiator Inspired by Leaf Transpiration: Exploring Energy Change Processes
The performance of photovoltaic (PV) cells is significantly influenced by their operating temperature. While conventional active cooling methods are limited by economic feasibility, passive cooling strategies often face challenges related to insufficient heat dissipation capacity. This study presents a bio-inspired evaporative heat sink, modeled on the transpiration and water transport mechanisms of plant leaves, which leverages porous media flow and heat transfer. The device uses capillary pressure, generated through the evaporation of the cooling medium under sunlight, to maintain continuous coolant flow, thereby achieving effective cooling. An experimental setup was developed to validate the device’s performance under a heat flux density of 1200 W/m2, resulting in a maximum temperature reduction of 5 °C. This study also investigated the effects of porous medium thickness and porosity on thermal performance. The results showed that increasing the thickness of the porous medium reduces cooling efficiency due to reduced fluid flow. In contrast, the effect of porosity was temperature-dependent: at evaporation temperatures below 67 °C, a porosity of 0.4 provided better cooling, while at higher temperatures, a porosity of 0.6 was more effective. These findings confirm the feasibility of the proposed device and provide valuable insights into optimizing porous media properties to enhance the passive cooling of photovoltaic cells.
Open AccessExperimental Study of a Bionic Porous Media Evaporative Radiator Inspired by Leaf Transpiration: Exploring Energy Change Processes
The performance of photovoltaic (PV) cells is significantly influenced by their operating temperature. While conventional active cooling methods are limited by economic feasibility, passive cooling strategies often face challenges related to insufficient heat dissipation capacity. This study presents a bio-inspired evaporative heat sink, modeled on the transpiration and water transport mechanisms of plant leaves, which leverages porous media flow and heat transfer. The device uses capillary pressure, generated through the evaporation of the cooling medium under sunlight, to maintain continuous coolant flow, thereby achieving effective cooling. An experimental setup was developed to validate the device’s performance under a heat flux density of 1200 W/m2, resulting in a maximum temperature reduction of 5 °C. This study also investigated the effects of porous medium thickness and porosity on thermal performance. The results showed that increasing the thickness of the porous medium reduces cooling efficiency due to reduced fluid flow. In contrast, the effect of porosity was temperature-dependent: at evaporation temperatures below 67 °C, a porosity of 0.4 provided better cooling, while at higher temperatures, a porosity of 0.6 was more effective. These findings confirm the feasibility of the proposed device and provide valuable insights into optimizing porous media properties to enhance the passive cooling of photovoltaic cells.
- Open Access
Investigation of Heat Transfer Performance in Deionized Water–Ethylene Glycol Binary Mixtures during Nucleate Pool Boiling
Pool boiling heat transfer is recognized as an exceptionally effective method, widely applied across various industries. The adoption of non-azeotropic binary mixtures aligns with the environmental objectives of modern industrial development and enhances the coefficient of performance (COP) in numerous systems. Therefore, investigating the boiling heat transfer characteristics of these mixtures is crucial to improving their industrial usability. In this study, mixtures of ethylene glycol and deionized water (EG/DW) in varying concentrations were chosen as the working fluids. A comprehensive experimental setup was developed, followed by a series of experiments to assess their pool boiling performance. Simultaneously, the thermophysical parameters of these mixtures underwent detailed examination and analysis. The research revealed that the concentration of EG in the mixture markedly affects its thermal properties and temperature glide, both of which are crucial in influencing the heat transfer coefficient. Additionally, six established heat transfer coefficient prediction correlations, primarily designed for pure fluids, have been employed. However, their application to non-azeotropic mixtures under experimental conditions revealed significant deviations. To address this issue, the present study modified existing correlations with the temperature slip characteristics of non-azeotropic mixtures. This process involved recalibrating the wall superheat values in the correlations to reflect the local temperature differential at the boiling point, thereby customizing them for application to non-azeotropic mixtures. The modified correlations highlighted the unique behaviors of non-azeotropic mixtures in boiling heat transfer, demonstrating improved compatibility with these mixtures in a deviation within a permissible 20% range compared with experimental results.
Open AccessInvestigation of Heat Transfer Performance in Deionized Water–Ethylene Glycol Binary Mixtures during Nucleate Pool Boiling
Pool boiling heat transfer is recognized as an exceptionally effective method, widely applied across various industries. The adoption of non-azeotropic binary mixtures aligns with the environmental objectives of modern industrial development and enhances the coefficient of performance (COP) in numerous systems. Therefore, investigating the boiling heat transfer characteristics of these mixtures is crucial to improving their industrial usability. In this study, mixtures of ethylene glycol and deionized water (EG/DW) in varying concentrations were chosen as the working fluids. A comprehensive experimental setup was developed, followed by a series of experiments to assess their pool boiling performance. Simultaneously, the thermophysical parameters of these mixtures underwent detailed examination and analysis. The research revealed that the concentration of EG in the mixture markedly affects its thermal properties and temperature glide, both of which are crucial in influencing the heat transfer coefficient. Additionally, six established heat transfer coefficient prediction correlations, primarily designed for pure fluids, have been employed. However, their application to non-azeotropic mixtures under experimental conditions revealed significant deviations. To address this issue, the present study modified existing correlations with the temperature slip characteristics of non-azeotropic mixtures. This process involved recalibrating the wall superheat values in the correlations to reflect the local temperature differential at the boiling point, thereby customizing them for application to non-azeotropic mixtures. The modified correlations highlighted the unique behaviors of non-azeotropic mixtures in boiling heat transfer, demonstrating improved compatibility with these mixtures in a deviation within a permissible 20% range compared with experimental results.
- Open Access
- 16 January 2024
- Published by MDPI AG in Preprints.org
Investigation of Heat Transfer Performance in Deionized Water-Ethylene Glycol Binary Mixtures during Nucleate Pool Boiling
Pool boiling heat transfer is recognized as one of the most effective heat transfer methods and has extensive applications in industry. The application of non-azeotropic binary mixtures can not only meet the environmental requirements of modern industrial development, but also improve the coefficient of performance (COP) of many systems. Therefore, studying the boiling heat transfer characteristics of non-azeotropic mixtures is important on improving their potential industrial application. This article selected ethylene glycol/deionized water (EG/DW) at varies concentration as the research working fluids, and conducted experimental research on the pool boiling performance. At the same time, the thermophysical parameters of the mixtures were studied and analyzed. The results showed that the concentration of EG in the mixture had a significant impact on the thermal properties and temperature glide of the mixture, where both affected the heat transfer deterioration. Based on experimental data, six widely used heat transfer coefficient prediction correlations were used for calculation, and two of them were modified. The deviation between the modified correlations and the experimental results remained within 20%.
- 16 January 2024
- Published by MDPI AG in Preprints.org
Open AccessInvestigation of Heat Transfer Performance in Deionized Water-Ethylene Glycol Binary Mixtures during Nucleate Pool Boiling
Pool boiling heat transfer is recognized as one of the most effective heat transfer methods and has extensive applications in industry. The application of non-azeotropic binary mixtures can not only meet the environmental requirements of modern industrial development, but also improve the coefficient of performance (COP) of many systems. Therefore, studying the boiling heat transfer characteristics of non-azeotropic mixtures is important on improving their potential industrial application. This article selected ethylene glycol/deionized water (EG/DW) at varies concentration as the research working fluids, and conducted experimental research on the pool boiling performance. At the same time, the thermophysical parameters of the mixtures were studied and analyzed. The results showed that the concentration of EG in the mixture had a significant impact on the thermal properties and temperature glide of the mixture, where both affected the heat transfer deterioration. Based on experimental data, six widely used heat transfer coefficient prediction correlations were used for calculation, and two of them were modified. The deviation between the modified correlations and the experimental results remained within 20%.
- Open Access
- 10 October 2023
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 51
Analysis of the thermal improvement of plate fin-tube heat exchanger with straight and curved rectangular winglet vortex generators
- 10 October 2023
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 51
Open AccessAnalysis of the thermal improvement of plate fin-tube heat exchanger with straight and curved rectangular winglet vortex generators