Luke V. Tollefson
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Luke V. Tollefson has a total of 92 co-authors. Here are the top co-authors by number of shared publications:
- Robert F. LaPrade
Twin Cities Orthopedics Edina Minnesota U.S.A.
21 shared publications - Christopher M. LaPrade
Twin Cities Orthopedics, Edina, Minnesota, USA
9 shared publications - Benjiman J. Wilebski
Twin Cities Orthopedics, Edina, Minnesota, USA
6 shared publications - Jonathan Thomas Super
Edinburgh Orthopaedics, Royal Infirmary of Edinburgh, Edinburgh, United Kingdom
6 shared publications Iain R. Murray
Edinburgh Orthopaedics, Royal Infirmary of Edinburgh, Edinburgh, United Kingdom
5 shared publications- Nicholas K. Retzer
Twin Cities Orthopedics, Edina, Minnesota, USA
5 shared publications
Latest Publications
- 3 November 2026
- Published by SAGE Publications in The American Journal of Sports Medicine
The Deep Medial Collateral Ligament: Part 2, Structural Properties and Failure Characteristics
Background: The deep medial collateral ligament (dMCL) has traditionally been described as a capsular thickening deep to the superficial medial collateral ligament; however, recent investigations suggest a more extensive anteromedial course with a more important role in knee stability. Despite this, its structural properties and failure characteristics are not well described. Purpose: To quantify the structural properties of the dMCL, including load to failure, stiffness, displacement, and failure location. Study Design: Descriptive laboratory study. Methods: Ten fresh-frozen cadaveric knees (mean age, 63.4 ± 4.7 years; range, 58-70 years; all males; 5 right, 5 left knees; mean body mass index, 26.2 ± 1.9 kg/m 2 ) were dissected to isolate the dMCL while preserving its meniscofemoral and meniscotibial attachments. Specimens were mounted in a 6 degrees of freedom robotic system and subjected to preconditioning and then uniaxial load-to-failure testing. Load, displacement, stiffness, and failure location were recorded. Results: The mean load to failure of the dMCL was 242.9 ± 86.6 N, with a mean stiffness of 25.3 ± 14.3 N/mm and a median displacement at failure of 12.4 mm (range, 8.9-31.8 mm). Failure occurred predominantly within the meniscotibial portion (9/10 specimens), with only 1 failure in the meniscofemoral portion, and none of the specimens failed at the femoral or tibial osseous attachments. Conclusion: When the expanded anteromedial course of the dMCL is included, its measured load to failure was higher than values previously reported using more restricted anatomic definitions. Failure occurred predominantly within the meniscotibial portion. These findings characterize the isolated structural properties and predominant failure pattern of the dMCL and may provide reference data for future biomechanical evaluation of medial knee reconstruction techniques. Clinical Relevance: Quantification of the structural properties of the dMCL provides a biomechanical basis for surgical reconstruction and fixation strategies. These data may assist in graft selection and fixation strength requirements in anatomic medial knee reconstructions, particularly in patients with anteromedial rotatory instability.
- 3 November 2026
- Published by SAGE Publications in The American Journal of Sports Medicine
The Deep Medial Collateral Ligament: Part 2, Structural Properties and Failure Characteristics
Background: The deep medial collateral ligament (dMCL) has traditionally been described as a capsular thickening deep to the superficial medial collateral ligament; however, recent investigations suggest a more extensive anteromedial course with a more important role in knee stability. Despite this, its structural properties and failure characteristics are not well described. Purpose: To quantify the structural properties of the dMCL, including load to failure, stiffness, displacement, and failure location. Study Design: Descriptive laboratory study. Methods: Ten fresh-frozen cadaveric knees (mean age, 63.4 ± 4.7 years; range, 58-70 years; all males; 5 right, 5 left knees; mean body mass index, 26.2 ± 1.9 kg/m 2 ) were dissected to isolate the dMCL while preserving its meniscofemoral and meniscotibial attachments. Specimens were mounted in a 6 degrees of freedom robotic system and subjected to preconditioning and then uniaxial load-to-failure testing. Load, displacement, stiffness, and failure location were recorded. Results: The mean load to failure of the dMCL was 242.9 ± 86.6 N, with a mean stiffness of 25.3 ± 14.3 N/mm and a median displacement at failure of 12.4 mm (range, 8.9-31.8 mm). Failure occurred predominantly within the meniscotibial portion (9/10 specimens), with only 1 failure in the meniscofemoral portion, and none of the specimens failed at the femoral or tibial osseous attachments. Conclusion: When the expanded anteromedial course of the dMCL is included, its measured load to failure was higher than values previously reported using more restricted anatomic definitions. Failure occurred predominantly within the meniscotibial portion. These findings characterize the isolated structural properties and predominant failure pattern of the dMCL and may provide reference data for future biomechanical evaluation of medial knee reconstruction techniques. Clinical Relevance: Quantification of the structural properties of the dMCL provides a biomechanical basis for surgical reconstruction and fixation strategies. These data may assist in graft selection and fixation strength requirements in anatomic medial knee reconstructions, particularly in patients with anteromedial rotatory instability.
- 26 October 2026
- Published by Wolters Kluwer Health in Journal of the American Academy of Orthopaedic Surgeons
A Translational Approach for Treatment of Posterior Cruciate Ligament Injuries: From Foundational Anatomic and Biomechanical Studies to Validated Surgical Outcomes
Posterior cruciate ligament (PCL) injuries were historically managed nonsurgically or with primary repairs, owing to limited anatomic knowledge, subjective diagnostic techniques, and nonvalidated reconstructions that frequently failed. We describe a two-decade, bench-to-bedside PCL research pyramid that progressively addressed these deficiencies. Foundational cadaveric work characterized the quantitative anatomy of the PCL, including the anterolateral and posteromedial bundles, yielding reproducible femoral and tibial osseous landmarks for tunnel placement. Robotic biomechanical testing established the codominant contribution of both bundles, optimal graft fixation angles, and the destabilizing influence of posterolateral corner injuries and flat tibial slope. Objective diagnostic methods, such as kneeling PCL stress radiography and posterior tibial translation on MRI, were validated to quantify laxity and detect chronic tears. These insights informed an anatomically grounded double-bundle reconstruction, complemented by multiligament tunnel convergence-avoidance strategies, evidence-based tensioning sequences, and a refined rehabilitation and bracing treatment protocol. Prospective outcome studies confirmed restoration of stability comparable to anterior cruciate ligament reconstructions, demonstrating how integrated translational research transformed treatment of this challenging injury.
- 26 October 2026
- Published by Wolters Kluwer Health in Journal of the American Academy of Orthopaedic Surgeons
A Translational Approach for Treatment of Posterior Cruciate Ligament Injuries: From Foundational Anatomic and Biomechanical Studies to Validated Surgical Outcomes
Posterior cruciate ligament (PCL) injuries were historically managed nonsurgically or with primary repairs, owing to limited anatomic knowledge, subjective diagnostic techniques, and nonvalidated reconstructions that frequently failed. We describe a two-decade, bench-to-bedside PCL research pyramid that progressively addressed these deficiencies. Foundational cadaveric work characterized the quantitative anatomy of the PCL, including the anterolateral and posteromedial bundles, yielding reproducible femoral and tibial osseous landmarks for tunnel placement. Robotic biomechanical testing established the codominant contribution of both bundles, optimal graft fixation angles, and the destabilizing influence of posterolateral corner injuries and flat tibial slope. Objective diagnostic methods, such as kneeling PCL stress radiography and posterior tibial translation on MRI, were validated to quantify laxity and detect chronic tears. These insights informed an anatomically grounded double-bundle reconstruction, complemented by multiligament tunnel convergence-avoidance strategies, evidence-based tensioning sequences, and a refined rehabilitation and bracing treatment protocol. Prospective outcome studies confirmed restoration of stability comparable to anterior cruciate ligament reconstructions, demonstrating how integrated translational research transformed treatment of this challenging injury.
- 26 October 2026
- Published by SAGE Publications in The American Journal of Sports Medicine
The Deep Medial Collateral Ligament, Part 1: Quantitative, Qualitative, and Radiographic Anatomy
Background: The deep medial collateral ligament (dMCL) has historically been described as capsular thickening with meniscofemoral and meniscotibial components deep to the superficial medial collateral ligament (sMCL). However, recent investigations suggest that the dMCL includes capsular expansion beyond the traditionally described midthird ligament region. Purpose: To define the attachment geometry and radiographic relationships of the dMCL using 3-dimensional coordinate mapping and standardized radiographic correlation. Study Design: Descriptive laboratory study. Methods: A total of 10 fresh-frozen cadaveric knees (mean age, 70.7 ± 6.8 years) were dissected to isolate the dMCL. A 6 degrees of freedom robotic testing apparatus with motion capture established 3-dimensional specimen-specific coordinate systems. The periphery of each femoral and tibial attachment site was digitized to determine attachment site geometry and spatial relationships to key medial landmarks. Radiopaque markers enabled standardized anteroposterior and lateral radiographic measurements. Results: Qualitatively, the dMCL demonstrated broad anteromedial capsular extension, with an anterior margin length of 27.0 ± 3.4 mm from the posterior aspect of the sMCL. Posteriorly, the dMCL blended with the anterior margin of the posterior oblique ligament. The femoral attachment was 10.7 ± 1.5 mm in anteroposterior width. The center of the femoral attachment of the dMCL was located 5.1 ± 2.0 mm posterior and 12.4 ± 3.5 mm distal to the medial epicondyle as well as 10.6 ± 3.2 mm distal to the center of the sMCL femoral attachment. The tibial attachment was 29.3 ± 3.7 mm in anteroposterior width and was located 2.2 ± 0.8 mm distal to the joint line. Radiographically, the center of the dMCL femoral attachment was 7.9 ± 2.9 mm from the center of the sMCL femoral attachment. The tibial attachment center was 15.0 ± 3.6 mm proximal to the center of the proximal sMCL tibial attachment and 41.1 ± 5.3 mm proximal to the center of the proximal edge of the distal sMCL tibial attachment. Conclusion: The dMCL demonstrated a broad and consistent anatomic footprint. Substantial anteromedial capsular expansion was consistently identified, extending anteriorly beyond the historically described narrow midthird capsular ligament deep to the sMCL. Clinical Relevance: These findings provide an updated qualitative and quantitative anatomic framework for future biomechanical investigations and should assist the surgical identification and radiographic assessment of the dMCL during medial-sided knee reconstruction procedures.
- 26 October 2026
- Published by SAGE Publications in The American Journal of Sports Medicine
The Deep Medial Collateral Ligament, Part 1: Quantitative, Qualitative, and Radiographic Anatomy
Background: The deep medial collateral ligament (dMCL) has historically been described as capsular thickening with meniscofemoral and meniscotibial components deep to the superficial medial collateral ligament (sMCL). However, recent investigations suggest that the dMCL includes capsular expansion beyond the traditionally described midthird ligament region. Purpose: To define the attachment geometry and radiographic relationships of the dMCL using 3-dimensional coordinate mapping and standardized radiographic correlation. Study Design: Descriptive laboratory study. Methods: A total of 10 fresh-frozen cadaveric knees (mean age, 70.7 ± 6.8 years) were dissected to isolate the dMCL. A 6 degrees of freedom robotic testing apparatus with motion capture established 3-dimensional specimen-specific coordinate systems. The periphery of each femoral and tibial attachment site was digitized to determine attachment site geometry and spatial relationships to key medial landmarks. Radiopaque markers enabled standardized anteroposterior and lateral radiographic measurements. Results: Qualitatively, the dMCL demonstrated broad anteromedial capsular extension, with an anterior margin length of 27.0 ± 3.4 mm from the posterior aspect of the sMCL. Posteriorly, the dMCL blended with the anterior margin of the posterior oblique ligament. The femoral attachment was 10.7 ± 1.5 mm in anteroposterior width. The center of the femoral attachment of the dMCL was located 5.1 ± 2.0 mm posterior and 12.4 ± 3.5 mm distal to the medial epicondyle as well as 10.6 ± 3.2 mm distal to the center of the sMCL femoral attachment. The tibial attachment was 29.3 ± 3.7 mm in anteroposterior width and was located 2.2 ± 0.8 mm distal to the joint line. Radiographically, the center of the dMCL femoral attachment was 7.9 ± 2.9 mm from the center of the sMCL femoral attachment. The tibial attachment center was 15.0 ± 3.6 mm proximal to the center of the proximal sMCL tibial attachment and 41.1 ± 5.3 mm proximal to the center of the proximal edge of the distal sMCL tibial attachment. Conclusion: The dMCL demonstrated a broad and consistent anatomic footprint. Substantial anteromedial capsular expansion was consistently identified, extending anteriorly beyond the historically described narrow midthird capsular ligament deep to the sMCL. Clinical Relevance: These findings provide an updated qualitative and quantitative anatomic framework for future biomechanical investigations and should assist the surgical identification and radiographic assessment of the dMCL during medial-sided knee reconstruction procedures.
- Open Access
- 14 October 2026
- Published by SAGE Publications in Orthopaedic Journal of Sports Medicine
- Vol. 14 (10)
Controversies in PCL Reconstruction: Why Does PCL Reconstruction Still Underperform? Failure Mechanisms, Residual Laxity, and a Risk Management Framework: A Current Concepts Review
Background: Posterior cruciate ligament (PCL) reconstruction (PCLR) remains among the least standardized procedures in knee ligament surgery. Despite substantial technical advances, objective residual posterior laxity and functional deficits persist at rates far exceeding those observed after anterior cruciate ligament reconstruction. Purpose: To critically evaluate the principal controversies in PCLR through the lens of failure mechanisms, residual instability, and individualized risk management. Study Design: Narrative review. Methods: A comprehensive search of MEDLINE/PubMed, Embase, and the Cochrane Library was conducted from database inception through February 27, 2026. Search terms included PCLR, PCL failure, residual laxity, posterolateral corner (PLC), tibial slope, all-inside PCL, tibial inlay, double-bundle PCL, and suture augmentation. Published consensus statements and relevant knee ligament surgery guidance documents from the American Academy of Orthopaedic Surgeons, the International Society of Arthroscopy, Knee Surgery and Orthopaedic Sports Medicine, and the Orthopaedic Research Society were additionally reviewed. Biomechanical investigations, cadaveric studies, prospective cohort studies, systematic reviews, and meta-analyses were prioritized; case series and expert opinion were included when appropriate. Results: Eight major controversies were identified: (1) single- versus double-bundle reconstruction; (2) transtibial versus tibial inlay technique; (3) autograft versus allograft selection; (4) the clinical significance of residual posterior laxity; (5) management of concomitant PLC deficiency; (6) rehabilitation and hamstring reintroduction timing; (7) the role of posterior tibial slope correction; and (8) suture augmentation. Across all domains, biomechanical advantages of technically superior approaches have failed to consistently translate into superior patient-reported outcomes. Failure to address PLC insufficiency, decreased posterior tibial slope, and graft-loading forces during rehabilitation represents the most common and preventable constellation of failure risk factors. A standardized definition of PCLR failure does not currently exist in the published literature. Conclusion: Successful PCLR depends less on identification of a universally superior technique and more on individualized management of biomechanical risk factors. A practical risk stratification framework is proposed to guide surgical decision-making. Future progress requires standardized failure definitions, objective instability assessment protocols, and criterion-based rehabilitation pathways.
- 14 October 2026
- Published by SAGE Publications in Orthopaedic Journal of Sports Medicine
- Vol. 14 (10)
Open AccessControversies in PCL Reconstruction: Why Does PCL Reconstruction Still Underperform? Failure Mechanisms, Residual Laxity, and a Risk Management Framework: A Current Concepts Review
Background: Posterior cruciate ligament (PCL) reconstruction (PCLR) remains among the least standardized procedures in knee ligament surgery. Despite substantial technical advances, objective residual posterior laxity and functional deficits persist at rates far exceeding those observed after anterior cruciate ligament reconstruction. Purpose: To critically evaluate the principal controversies in PCLR through the lens of failure mechanisms, residual instability, and individualized risk management. Study Design: Narrative review. Methods: A comprehensive search of MEDLINE/PubMed, Embase, and the Cochrane Library was conducted from database inception through February 27, 2026. Search terms included PCLR, PCL failure, residual laxity, posterolateral corner (PLC), tibial slope, all-inside PCL, tibial inlay, double-bundle PCL, and suture augmentation. Published consensus statements and relevant knee ligament surgery guidance documents from the American Academy of Orthopaedic Surgeons, the International Society of Arthroscopy, Knee Surgery and Orthopaedic Sports Medicine, and the Orthopaedic Research Society were additionally reviewed. Biomechanical investigations, cadaveric studies, prospective cohort studies, systematic reviews, and meta-analyses were prioritized; case series and expert opinion were included when appropriate. Results: Eight major controversies were identified: (1) single- versus double-bundle reconstruction; (2) transtibial versus tibial inlay technique; (3) autograft versus allograft selection; (4) the clinical significance of residual posterior laxity; (5) management of concomitant PLC deficiency; (6) rehabilitation and hamstring reintroduction timing; (7) the role of posterior tibial slope correction; and (8) suture augmentation. Across all domains, biomechanical advantages of technically superior approaches have failed to consistently translate into superior patient-reported outcomes. Failure to address PLC insufficiency, decreased posterior tibial slope, and graft-loading forces during rehabilitation represents the most common and preventable constellation of failure risk factors. A standardized definition of PCLR failure does not currently exist in the published literature. Conclusion: Successful PCLR depends less on identification of a universally superior technique and more on individualized management of biomechanical risk factors. A practical risk stratification framework is proposed to guide surgical decision-making. Future progress requires standardized failure definitions, objective instability assessment protocols, and criterion-based rehabilitation pathways.
- Open Access
- 9 October 2026
- Published by SAGE Publications in Orthopaedic Journal of Sports Medicine
- Vol. 14 (10)
Anatomic Anterolateral Ligament Reconstruction Using the Iliotibial Band Results in Less Internal Rotation Constraint and Lateral Compartment Joint Loading As Compared With the Modified Lemaire Procedure: A Robotic Biomechanical Study
Background: While current anterolateral complex knee procedures have been demonstrated to reduce anterior cruciate ligament reconstruction (ACLR) graft failures, concerns about potential lateral compartment overload are present. Purpose: To compare lateral compartment pressures and knee laxity between an anterolateral ligament reconstruction (ALLR) using the iliotibial band and the modified Lemaire lateral extra-articular tenodesis (LET) procedure by biomechanically testing for anterior tibial translation, a simulated pivot shift, and internal rotation (IR). Study Design: Controlled laboratory study. Methods: Seven paired cadaveric knees were utilized for this study. A 6 degrees of freedom robotic system was used to measure anterior tibial translation with an 88-N anterior drawer load, IR with a 5-N·m torque, and a simulated pivot-shift test using 5-N·m IR and 10-N·m valgus torques. Force sensors inserted under the lateral meniscus measured lateral compartment pressure during the simulated pivot shift. All specimens were tested in 3 states: intact, anterior cruciate ligament cut, and ACLR. The specimen pairs were then randomized to either an anatomic ALLR technique or a modified Lemaire LET. Results: When compared with the ALLR cohort, the modified Lemaire LET cohort had significantly increased lateral compartment peak pressure at 30° ( P = .047) and significantly decreased IR at all flexion angles (all P < .05). For the modified Lemaire cohort, lateral compartment peak contact pressures were significantly increased versus the intact and ACLR states at 30° of flexion, and IR was significantly decreased as compared with the intact state at 30°, 45°, and 90° during IR testing (all P < .05). For the ALLR cohort specifically, lateral compartment peak contact pressures were not significantly different from intact and ACLR states, and IR was significantly increased relative to the intact state at 30°, 45°, and 60° during IR testing (all P < .05). Conclusions: Lateral compartment peak contact pressure was restored to near intact values with an ALLR using the posterior third of the iliotibial band, while the modified Lemaire LET led to significantly increased pressures. Additionally, the modified Lemaire LET led to decreased IR at all flexion angles, while the ALLR had significantly increased IR between 30° and 60° of flexion. Clinical Relevance: Reconstruction of the anterolateral ligament using the posterior third of the iliotibial band is an option for knees requiring an anterolateral complex procedure. Modified Lemaire LET leads to increased lateral compartment pressures and decreased IR; however, no negative long-term outcomes of overconstraint have been agreed on in the literature.
- 9 October 2026
- Published by SAGE Publications in Orthopaedic Journal of Sports Medicine
- Vol. 14 (10)
Open AccessAnatomic Anterolateral Ligament Reconstruction Using the Iliotibial Band Results in Less Internal Rotation Constraint and Lateral Compartment Joint Loading As Compared With the Modified Lemaire Procedure: A Robotic Biomechanical Study
Background: While current anterolateral complex knee procedures have been demonstrated to reduce anterior cruciate ligament reconstruction (ACLR) graft failures, concerns about potential lateral compartment overload are present. Purpose: To compare lateral compartment pressures and knee laxity between an anterolateral ligament reconstruction (ALLR) using the iliotibial band and the modified Lemaire lateral extra-articular tenodesis (LET) procedure by biomechanically testing for anterior tibial translation, a simulated pivot shift, and internal rotation (IR). Study Design: Controlled laboratory study. Methods: Seven paired cadaveric knees were utilized for this study. A 6 degrees of freedom robotic system was used to measure anterior tibial translation with an 88-N anterior drawer load, IR with a 5-N·m torque, and a simulated pivot-shift test using 5-N·m IR and 10-N·m valgus torques. Force sensors inserted under the lateral meniscus measured lateral compartment pressure during the simulated pivot shift. All specimens were tested in 3 states: intact, anterior cruciate ligament cut, and ACLR. The specimen pairs were then randomized to either an anatomic ALLR technique or a modified Lemaire LET. Results: When compared with the ALLR cohort, the modified Lemaire LET cohort had significantly increased lateral compartment peak pressure at 30° ( P = .047) and significantly decreased IR at all flexion angles (all P < .05). For the modified Lemaire cohort, lateral compartment peak contact pressures were significantly increased versus the intact and ACLR states at 30° of flexion, and IR was significantly decreased as compared with the intact state at 30°, 45°, and 90° during IR testing (all P < .05). For the ALLR cohort specifically, lateral compartment peak contact pressures were not significantly different from intact and ACLR states, and IR was significantly increased relative to the intact state at 30°, 45°, and 60° during IR testing (all P < .05). Conclusions: Lateral compartment peak contact pressure was restored to near intact values with an ALLR using the posterior third of the iliotibial band, while the modified Lemaire LET led to significantly increased pressures. Additionally, the modified Lemaire LET led to decreased IR at all flexion angles, while the ALLR had significantly increased IR between 30° and 60° of flexion. Clinical Relevance: Reconstruction of the anterolateral ligament using the posterior third of the iliotibial band is an option for knees requiring an anterolateral complex procedure. Modified Lemaire LET leads to increased lateral compartment pressures and decreased IR; however, no negative long-term outcomes of overconstraint have been agreed on in the literature.
- Open Access
- 7 October 2026
- Published by Wiley in Journal of Orthopaedic Research
- Vol. 44 (10) , e70286
Preoperative 7 T 3D Meniscal T2* Mapping Correlates With Postoperative Extrusion After Medial Meniscus Posterior Root Tear Repair
Medial meniscus posterior root tear (MMPRT) repairs stabilize root attachment and yield improved clinical outcomes, yet many patients develop persistent meniscal extrusion and osteoarthritis. This study evaluates menisci in MMPRT patients using 3D T2* mapping and assesses T2* correlation with medial meniscal extrusion. Patients underwent 7 T knee MRI before root tear repair and again at 6‐month postoperative follow‐up. Age‐ and gender‐matched controls were scanned once. The protocol included clinical turbo‐spin‐echo sequences and a quantitative 3D GRE sequence, used to calculate T2* mapping of the menisci. Pre‐ and postrepair meniscal extrusion was measured on coronal T2‐weighted images by two independent radiologists. Twenty‐five patients (mean age 53 ± 8 years) and nine controls (51 ± 11 years) were included. Repairs were intact on follow‐up MRI in all patients. T2* values were significantly elevated in patients both pre‐ and postrepair compared with controls across medial and lateral meniscal subregions. Medial meniscal extrusion increased from 3.7 ± 1.1 mm at baseline to 4.9 ± 1.5 mm ( p = 0.002), postoperatively. Prerepair meniscal T2* strongly correlated with postrepair extrusion ( ρ = 0.765; p < 0.001). High‐resolution 3D T2* mapping at 7 T revealed persistently elevated T2* values after MMPRT repair, consistent with ongoing collagen fiber disorganization. Prerepair T2* values were strongly correlated with early postrepair meniscal extrusion despite MRI‐intact repairs, indicating that preoperative tissue quality is associated with postoperative outcomes. These findings support quantitative T2* mapping as a prognostic imaging biomarker that complements conventional morphologic MRI in the evaluation of MMPRTs.
- 7 October 2026
- Published by Wiley in Journal of Orthopaedic Research
- Vol. 44 (10) , e70286
Open AccessPreoperative 7 T 3D Meniscal T2* Mapping Correlates With Postoperative Extrusion After Medial Meniscus Posterior Root Tear Repair
Medial meniscus posterior root tear (MMPRT) repairs stabilize root attachment and yield improved clinical outcomes, yet many patients develop persistent meniscal extrusion and osteoarthritis. This study evaluates menisci in MMPRT patients using 3D T2* mapping and assesses T2* correlation with medial meniscal extrusion. Patients underwent 7 T knee MRI before root tear repair and again at 6‐month postoperative follow‐up. Age‐ and gender‐matched controls were scanned once. The protocol included clinical turbo‐spin‐echo sequences and a quantitative 3D GRE sequence, used to calculate T2* mapping of the menisci. Pre‐ and postrepair meniscal extrusion was measured on coronal T2‐weighted images by two independent radiologists. Twenty‐five patients (mean age 53 ± 8 years) and nine controls (51 ± 11 years) were included. Repairs were intact on follow‐up MRI in all patients. T2* values were significantly elevated in patients both pre‐ and postrepair compared with controls across medial and lateral meniscal subregions. Medial meniscal extrusion increased from 3.7 ± 1.1 mm at baseline to 4.9 ± 1.5 mm ( p = 0.002), postoperatively. Prerepair meniscal T2* strongly correlated with postrepair extrusion ( ρ = 0.765; p < 0.001). High‐resolution 3D T2* mapping at 7 T revealed persistently elevated T2* values after MMPRT repair, consistent with ongoing collagen fiber disorganization. Prerepair T2* values were strongly correlated with early postrepair meniscal extrusion despite MRI‐intact repairs, indicating that preoperative tissue quality is associated with postoperative outcomes. These findings support quantitative T2* mapping as a prognostic imaging biomarker that complements conventional morphologic MRI in the evaluation of MMPRTs.
- Open Access
- 30 September 2026
- Published by SAGE Publications in Video Journal of Sports Medicine
- Vol. 6 (5)
Fibular Collateral Ligament Reconstruction With Biceps Femoris Tendon Repair and Lateral Meniscal Radial Tear Repair With Combined Transtibial Tunnel Fixation and Inside-Out Hashtag Technique
Background: The fibular collateral ligament (FCL) is the primary restraint to varus stress at the knee. Concomitant injuries are common, including disruption of the menisci and the biceps femoris tendon. Radial tears of the lateral meniscus may occur with FCL injuries, and preservation through repair helps maintain the meniscal function. Indications: When an FCL injury is inadequately treated, patients may experience persistent instability, premature osteoarthritis, and an increased risk of graft failure in the setting of concurrent cruciate ligament injury. Anatomic FCL reconstruction (FCLR) has been shown to be preferable over repair. It is important to address all concomitant pathology associated with an FCL tear, given the known risk of progression to osteoarthritis. A widely separated radial tear may be addressed with a combined approach that includes a transtibial tunnel and an inside-out hashtag suture technique to achieve optimal reduction and fixation. Technique Description: The technique described was for an FCLR with a semitendinosus autograft, with concomitant repair of a lateral meniscus radial tear using a transtibial tunnel and inside-out hashtag technique. The femoral and tibial tunnels for the FCL were created first. A semitendinosus autograft was then harvested and prepared for an anatomic FCLR. Arthroscopy demonstrated a completely separated radial tear of the lateral meniscus, which was reduced through a transtibial tunnel. Inside-out vertical and horizontal mattress sutures were then placed to complete a hashtag repair. The FCL graft was fixed, and the torn biceps femoris tendon was repaired to the fibular head with a suture anchor. Results: Recent literature demonstrates favorable clinical outcome scores and patient satisfaction with anatomic FCLR. Another study reports an 80% clinical success rate for radial meniscal repair, with the lack of a transtibial tunnel being a potential risk factor for failure in patients with widely separated tears, supporting this comprehensive surgical strategy. Discussion/Conclusion: Combined lateral knee injuries require careful evaluation, and it is important to address all associated pathology. For widely separated radial meniscal tears, combining a transtibial tunnel approach with a hashtag inside-out suture configuration can create a stable construct that reapproximates the tear and facilitates healing. Patient Consent Disclosure Statement: The author(s) attests that consent has been obtained from any patient(s) appearing in this publication. If the individual may be identifiable, the author(s) has included a statement of release or other written form of approval from the patient(s) with this submission for publication.
- 30 September 2026
- Published by SAGE Publications in Video Journal of Sports Medicine
- Vol. 6 (5)
Open AccessFibular Collateral Ligament Reconstruction With Biceps Femoris Tendon Repair and Lateral Meniscal Radial Tear Repair With Combined Transtibial Tunnel Fixation and Inside-Out Hashtag Technique
Background: The fibular collateral ligament (FCL) is the primary restraint to varus stress at the knee. Concomitant injuries are common, including disruption of the menisci and the biceps femoris tendon. Radial tears of the lateral meniscus may occur with FCL injuries, and preservation through repair helps maintain the meniscal function. Indications: When an FCL injury is inadequately treated, patients may experience persistent instability, premature osteoarthritis, and an increased risk of graft failure in the setting of concurrent cruciate ligament injury. Anatomic FCL reconstruction (FCLR) has been shown to be preferable over repair. It is important to address all concomitant pathology associated with an FCL tear, given the known risk of progression to osteoarthritis. A widely separated radial tear may be addressed with a combined approach that includes a transtibial tunnel and an inside-out hashtag suture technique to achieve optimal reduction and fixation. Technique Description: The technique described was for an FCLR with a semitendinosus autograft, with concomitant repair of a lateral meniscus radial tear using a transtibial tunnel and inside-out hashtag technique. The femoral and tibial tunnels for the FCL were created first. A semitendinosus autograft was then harvested and prepared for an anatomic FCLR. Arthroscopy demonstrated a completely separated radial tear of the lateral meniscus, which was reduced through a transtibial tunnel. Inside-out vertical and horizontal mattress sutures were then placed to complete a hashtag repair. The FCL graft was fixed, and the torn biceps femoris tendon was repaired to the fibular head with a suture anchor. Results: Recent literature demonstrates favorable clinical outcome scores and patient satisfaction with anatomic FCLR. Another study reports an 80% clinical success rate for radial meniscal repair, with the lack of a transtibial tunnel being a potential risk factor for failure in patients with widely separated tears, supporting this comprehensive surgical strategy. Discussion/Conclusion: Combined lateral knee injuries require careful evaluation, and it is important to address all associated pathology. For widely separated radial meniscal tears, combining a transtibial tunnel approach with a hashtag inside-out suture configuration can create a stable construct that reapproximates the tear and facilitates healing. Patient Consent Disclosure Statement: The author(s) attests that consent has been obtained from any patient(s) appearing in this publication. If the individual may be identifiable, the author(s) has included a statement of release or other written form of approval from the patient(s) with this submission for publication.
- Open Access
- 29 September 2026
- Published by Wiley in Arthroscopy
- p. e70579
The Use of Unloader Bracing in the Management of Knee Osteoarthritis: A Modified Delphi Consensus Study
Purpose: To develop international expert consensus on the role of unloader bracing in the management of tibiofemoral osteoarthritis (OA) by addressing indications, contraindications, clinical evaluation, perioperative applications, and research priorities using a modified Delphi methodology. Methods: A modified Delphi process was conducted in line with the Arthroscopy consensus methodology guidance. Twenty‐nine knee preservation specialists across 5 continents participated. An evidence review meeting with consensus breakout discussions informed the development of 57 initial statements, which were rated anonymously across 3 survey rounds using a 5‐point Likert scale. Predefined consensus thresholds were ≥70% agreement and <20% disagreement for rounds 1 and 2 and ≥75% agreement and <10% disagreement in round 3. Statements were iteratively refined with feedback until consensus was achieved after 3 rounds. Results: All 29 experts completed all 3 rounds (100% response rate). All 42 of the statements in round 3 achieved consensus. There was strong agreement that unloader bracing reduces ipsilateral compartment contact pressures and should be considered within a multimodal management pathway for tibiofemoral OA. Consensus supported bracing for symptomatic unicompartmental OA, particularly in those with correctable alignment on clinical examination. Experts endorsed the use of unloader braces as a screening tool prior to osteotomy, for symptomatic management while awaiting surgery, and as a postoperative adjunct in symptomatic patients with ipsilateral malalignment. A minimum 6‐week diagnostic trial and a 6‐month therapeutic period were agreed on for use. Future research priorities included standardized bracing protocols and high‐quality randomized trials. Conclusions: This modified Delphi consensus study provides expert‐derived recommendations for the use of unloader bracing in the management of knee OA, across nonoperative, preoperative, perioperative, and postoperative contexts. Although unloader bracing should not replace definitive surgical options where indicated, it may serve as a valuable adjunct or alternative treatment in selected patients, particularly those with unicompartmental disease with correctable malalignment. Level of Evidence: Level V, expert consensus.
- 29 September 2026
- Published by Wiley in Arthroscopy
- p. e70579
Open AccessThe Use of Unloader Bracing in the Management of Knee Osteoarthritis: A Modified Delphi Consensus Study
Purpose: To develop international expert consensus on the role of unloader bracing in the management of tibiofemoral osteoarthritis (OA) by addressing indications, contraindications, clinical evaluation, perioperative applications, and research priorities using a modified Delphi methodology. Methods: A modified Delphi process was conducted in line with the Arthroscopy consensus methodology guidance. Twenty‐nine knee preservation specialists across 5 continents participated. An evidence review meeting with consensus breakout discussions informed the development of 57 initial statements, which were rated anonymously across 3 survey rounds using a 5‐point Likert scale. Predefined consensus thresholds were ≥70% agreement and <20% disagreement for rounds 1 and 2 and ≥75% agreement and <10% disagreement in round 3. Statements were iteratively refined with feedback until consensus was achieved after 3 rounds. Results: All 29 experts completed all 3 rounds (100% response rate). All 42 of the statements in round 3 achieved consensus. There was strong agreement that unloader bracing reduces ipsilateral compartment contact pressures and should be considered within a multimodal management pathway for tibiofemoral OA. Consensus supported bracing for symptomatic unicompartmental OA, particularly in those with correctable alignment on clinical examination. Experts endorsed the use of unloader braces as a screening tool prior to osteotomy, for symptomatic management while awaiting surgery, and as a postoperative adjunct in symptomatic patients with ipsilateral malalignment. A minimum 6‐week diagnostic trial and a 6‐month therapeutic period were agreed on for use. Future research priorities included standardized bracing protocols and high‐quality randomized trials. Conclusions: This modified Delphi consensus study provides expert‐derived recommendations for the use of unloader bracing in the management of knee OA, across nonoperative, preoperative, perioperative, and postoperative contexts. Although unloader bracing should not replace definitive surgical options where indicated, it may serve as a valuable adjunct or alternative treatment in selected patients, particularly those with unicompartmental disease with correctable malalignment. Level of Evidence: Level V, expert consensus.
- 27 August 2026
- Published by SAGE Publications in The American Journal of Sports Medicine
- Vol. 54 (12) , 2972-2980
Effect of Multiple Centralization Sutures on Meniscal Extrusion and Contact Pressures in a Cadaveric Model of Medial Meniscus Root Repair
Background: Adding a centralization suture (CS) during repair of a posterior medial meniscus root (PMMR) tear may decrease meniscal extrusion and osteoarthritis progression. However, the number and optimal placement of CSs remain unclear. Hypothesis: Increasing numbers and changing localization of CSs would not influence the degree of postoperative extrusion or joint contact pressures. Study Design: Controlled laboratory study. Methods: Meniscal extrusion and tibiofemoral contact pressures were assessed using a 3-dimensional motion capture system and pressure sensors in 9 human cadaveric knees. A nonanatomic root repair was created to simulate persistent meniscal extrusion after a PMMR repair. Each knee was tested under 10 conditions: (1) intact, (2) PMMR tear, (3) root repair, (4) CS at the posterior border of the medial collateral ligament (MCL) (CS1), (5) CS midway between CS 1 and CS 3 (CS2), (6) CS at the midpoint between the MCL and posterior root attachment (CS3), and (7-10) combinations of these CSs (all CSs were in addition to the root repair). Analysis of variance testing was used for analyses of pressure data and extrusion measurements. Results: There was no significant difference in medial contact pressure between the intact state and the states with root repair in combination with any CS configuration ( P > .05). Contact pressures were reduced compared to the root repair state for CS1 alone at 0° ( P = .014); the combination of CS2 and CS3 at 0°, 60°, and 120° ( P ≤ .038); and the combination of all 3 CSs at 0°, 30°, and 60° of flexion ( P ≤ .037). Extrusion was reduced compared to the root repair state for CS1 alone at 60° ( P = .043) and all 3 CSs combined at 90° of flexion ( P < .009). Conclusion: A single CS placed at the posterior border of the MCL decreased medial contact pressures at 0° and reduced extrusion at 60° of flexion. The combined use of 2 CSs placed at the posteromedial meniscus junction reduced contact pressures across multiple flexion angles (0°, 60°, and 120°). The combination of 3 CSs reduced contact pressures at 0°, 30°, and 60° and extrusion at 90°. Until clinical studies are conducted, the benefits of additional CSs should be weighed against time and cost. Clinical Relevance: These findings should guide surgeons on the optimal number and placement of CSs to minimize meniscal extrusion and restore medial compartment contact pressures.
- 27 August 2026
- Published by SAGE Publications in The American Journal of Sports Medicine
- Vol. 54 (12) , 2972-2980
Effect of Multiple Centralization Sutures on Meniscal Extrusion and Contact Pressures in a Cadaveric Model of Medial Meniscus Root Repair
Background: Adding a centralization suture (CS) during repair of a posterior medial meniscus root (PMMR) tear may decrease meniscal extrusion and osteoarthritis progression. However, the number and optimal placement of CSs remain unclear. Hypothesis: Increasing numbers and changing localization of CSs would not influence the degree of postoperative extrusion or joint contact pressures. Study Design: Controlled laboratory study. Methods: Meniscal extrusion and tibiofemoral contact pressures were assessed using a 3-dimensional motion capture system and pressure sensors in 9 human cadaveric knees. A nonanatomic root repair was created to simulate persistent meniscal extrusion after a PMMR repair. Each knee was tested under 10 conditions: (1) intact, (2) PMMR tear, (3) root repair, (4) CS at the posterior border of the medial collateral ligament (MCL) (CS1), (5) CS midway between CS 1 and CS 3 (CS2), (6) CS at the midpoint between the MCL and posterior root attachment (CS3), and (7-10) combinations of these CSs (all CSs were in addition to the root repair). Analysis of variance testing was used for analyses of pressure data and extrusion measurements. Results: There was no significant difference in medial contact pressure between the intact state and the states with root repair in combination with any CS configuration ( P > .05). Contact pressures were reduced compared to the root repair state for CS1 alone at 0° ( P = .014); the combination of CS2 and CS3 at 0°, 60°, and 120° ( P ≤ .038); and the combination of all 3 CSs at 0°, 30°, and 60° of flexion ( P ≤ .037). Extrusion was reduced compared to the root repair state for CS1 alone at 60° ( P = .043) and all 3 CSs combined at 90° of flexion ( P < .009). Conclusion: A single CS placed at the posterior border of the MCL decreased medial contact pressures at 0° and reduced extrusion at 60° of flexion. The combined use of 2 CSs placed at the posteromedial meniscus junction reduced contact pressures across multiple flexion angles (0°, 60°, and 120°). The combination of 3 CSs reduced contact pressures at 0°, 30°, and 60° and extrusion at 90°. Until clinical studies are conducted, the benefits of additional CSs should be weighed against time and cost. Clinical Relevance: These findings should guide surgeons on the optimal number and placement of CSs to minimize meniscal extrusion and restore medial compartment contact pressures.
- Open Access
- 19 August 2026
- Published by Wiley in Arthroscopy Techniques
- Vol. 15 (9) , e70123
Concurrent High Tibial Osteotomy, Anterior Cruciate Ligament Reconstruction, and Medial Meniscus Posterior Root Repair
Medial meniscus posterior root tears and anterior cruciate ligament (ACL) injuries disrupt knee biomechanics and accelerate joint degeneration, particularly in the presence of varus malalignment. This technical note describes a combined surgical approach that integrates medial meniscus posterior root repair, ACL reconstruction, and high tibial osteotomy (HTO) to restore joint stability, optimize load distribution, and prevent osteoarthritis progression. The procedure is performed arthroscopically using anteromedial and anterolateral portals. Meniscal root and ACL footprints are prepared, and sutures are passed using a loop‐stitch technique. A biplanar high tibial osteotomy is then performed distal to the guide pins to correct varus alignment, with plate fixation positioned posteriorly and distally for optimal stability. The meniscal root tunnel is drilled at a 45° angle, followed by ACL tunnel placement and graft fixation using interference screws and a suspensory button system. This combined approach enables simultaneous restoration of meniscal function, knee stability, and mechanical alignment, potentially improving long‐term outcomes compared with isolated procedures.
- 19 August 2026
- Published by Wiley in Arthroscopy Techniques
- Vol. 15 (9) , e70123
Open AccessConcurrent High Tibial Osteotomy, Anterior Cruciate Ligament Reconstruction, and Medial Meniscus Posterior Root Repair
Medial meniscus posterior root tears and anterior cruciate ligament (ACL) injuries disrupt knee biomechanics and accelerate joint degeneration, particularly in the presence of varus malalignment. This technical note describes a combined surgical approach that integrates medial meniscus posterior root repair, ACL reconstruction, and high tibial osteotomy (HTO) to restore joint stability, optimize load distribution, and prevent osteoarthritis progression. The procedure is performed arthroscopically using anteromedial and anterolateral portals. Meniscal root and ACL footprints are prepared, and sutures are passed using a loop‐stitch technique. A biplanar high tibial osteotomy is then performed distal to the guide pins to correct varus alignment, with plate fixation positioned posteriorly and distally for optimal stability. The meniscal root tunnel is drilled at a 45° angle, followed by ACL tunnel placement and graft fixation using interference screws and a suspensory button system. This combined approach enables simultaneous restoration of meniscal function, knee stability, and mechanical alignment, potentially improving long‐term outcomes compared with isolated procedures.