Nicholas K. Retzer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Nicholas K. Retzer has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Robert F. LaPrade
Twin Cities Orthopedics Edina Minnesota U.S.A.
7 shared publications - Benjiman J. Wilebski
Twin Cities Orthopedics, Edina, Minnesota, USA
6 shared publications - Luke V. Tollefson
Twin Cities Orthopedics, Edina, Minnesota, USA
5 shared publications - Rylan A. Behnke
Twin Cities Orthopedics, Edina, Minnesota, USA
4 shared publications - Christopher M. LaPrade
Twin Cities Orthopedics, Edina, Minnesota, USA
3 shared publications Dustin R. Lee
Twin Cities Orthopedics, Edina, Minnesota, USA
3 shared publications
Latest Publications
- 3 November 2026
- Published by SAGE Publications in The American Journal of Sports Medicine
The Deep Medial Collateral Ligament: Part 2, Structural Properties and Failure Characteristics
Background: The deep medial collateral ligament (dMCL) has traditionally been described as a capsular thickening deep to the superficial medial collateral ligament; however, recent investigations suggest a more extensive anteromedial course with a more important role in knee stability. Despite this, its structural properties and failure characteristics are not well described. Purpose: To quantify the structural properties of the dMCL, including load to failure, stiffness, displacement, and failure location. Study Design: Descriptive laboratory study. Methods: Ten fresh-frozen cadaveric knees (mean age, 63.4 ± 4.7 years; range, 58-70 years; all males; 5 right, 5 left knees; mean body mass index, 26.2 ± 1.9 kg/m 2 ) were dissected to isolate the dMCL while preserving its meniscofemoral and meniscotibial attachments. Specimens were mounted in a 6 degrees of freedom robotic system and subjected to preconditioning and then uniaxial load-to-failure testing. Load, displacement, stiffness, and failure location were recorded. Results: The mean load to failure of the dMCL was 242.9 ± 86.6 N, with a mean stiffness of 25.3 ± 14.3 N/mm and a median displacement at failure of 12.4 mm (range, 8.9-31.8 mm). Failure occurred predominantly within the meniscotibial portion (9/10 specimens), with only 1 failure in the meniscofemoral portion, and none of the specimens failed at the femoral or tibial osseous attachments. Conclusion: When the expanded anteromedial course of the dMCL is included, its measured load to failure was higher than values previously reported using more restricted anatomic definitions. Failure occurred predominantly within the meniscotibial portion. These findings characterize the isolated structural properties and predominant failure pattern of the dMCL and may provide reference data for future biomechanical evaluation of medial knee reconstruction techniques. Clinical Relevance: Quantification of the structural properties of the dMCL provides a biomechanical basis for surgical reconstruction and fixation strategies. These data may assist in graft selection and fixation strength requirements in anatomic medial knee reconstructions, particularly in patients with anteromedial rotatory instability.
- 3 November 2026
- Published by SAGE Publications in The American Journal of Sports Medicine
The Deep Medial Collateral Ligament: Part 2, Structural Properties and Failure Characteristics
Background: The deep medial collateral ligament (dMCL) has traditionally been described as a capsular thickening deep to the superficial medial collateral ligament; however, recent investigations suggest a more extensive anteromedial course with a more important role in knee stability. Despite this, its structural properties and failure characteristics are not well described. Purpose: To quantify the structural properties of the dMCL, including load to failure, stiffness, displacement, and failure location. Study Design: Descriptive laboratory study. Methods: Ten fresh-frozen cadaveric knees (mean age, 63.4 ± 4.7 years; range, 58-70 years; all males; 5 right, 5 left knees; mean body mass index, 26.2 ± 1.9 kg/m 2 ) were dissected to isolate the dMCL while preserving its meniscofemoral and meniscotibial attachments. Specimens were mounted in a 6 degrees of freedom robotic system and subjected to preconditioning and then uniaxial load-to-failure testing. Load, displacement, stiffness, and failure location were recorded. Results: The mean load to failure of the dMCL was 242.9 ± 86.6 N, with a mean stiffness of 25.3 ± 14.3 N/mm and a median displacement at failure of 12.4 mm (range, 8.9-31.8 mm). Failure occurred predominantly within the meniscotibial portion (9/10 specimens), with only 1 failure in the meniscofemoral portion, and none of the specimens failed at the femoral or tibial osseous attachments. Conclusion: When the expanded anteromedial course of the dMCL is included, its measured load to failure was higher than values previously reported using more restricted anatomic definitions. Failure occurred predominantly within the meniscotibial portion. These findings characterize the isolated structural properties and predominant failure pattern of the dMCL and may provide reference data for future biomechanical evaluation of medial knee reconstruction techniques. Clinical Relevance: Quantification of the structural properties of the dMCL provides a biomechanical basis for surgical reconstruction and fixation strategies. These data may assist in graft selection and fixation strength requirements in anatomic medial knee reconstructions, particularly in patients with anteromedial rotatory instability.
- 26 October 2026
- Published by SAGE Publications in The American Journal of Sports Medicine
The Deep Medial Collateral Ligament, Part 1: Quantitative, Qualitative, and Radiographic Anatomy
Background: The deep medial collateral ligament (dMCL) has historically been described as capsular thickening with meniscofemoral and meniscotibial components deep to the superficial medial collateral ligament (sMCL). However, recent investigations suggest that the dMCL includes capsular expansion beyond the traditionally described midthird ligament region. Purpose: To define the attachment geometry and radiographic relationships of the dMCL using 3-dimensional coordinate mapping and standardized radiographic correlation. Study Design: Descriptive laboratory study. Methods: A total of 10 fresh-frozen cadaveric knees (mean age, 70.7 ± 6.8 years) were dissected to isolate the dMCL. A 6 degrees of freedom robotic testing apparatus with motion capture established 3-dimensional specimen-specific coordinate systems. The periphery of each femoral and tibial attachment site was digitized to determine attachment site geometry and spatial relationships to key medial landmarks. Radiopaque markers enabled standardized anteroposterior and lateral radiographic measurements. Results: Qualitatively, the dMCL demonstrated broad anteromedial capsular extension, with an anterior margin length of 27.0 ± 3.4 mm from the posterior aspect of the sMCL. Posteriorly, the dMCL blended with the anterior margin of the posterior oblique ligament. The femoral attachment was 10.7 ± 1.5 mm in anteroposterior width. The center of the femoral attachment of the dMCL was located 5.1 ± 2.0 mm posterior and 12.4 ± 3.5 mm distal to the medial epicondyle as well as 10.6 ± 3.2 mm distal to the center of the sMCL femoral attachment. The tibial attachment was 29.3 ± 3.7 mm in anteroposterior width and was located 2.2 ± 0.8 mm distal to the joint line. Radiographically, the center of the dMCL femoral attachment was 7.9 ± 2.9 mm from the center of the sMCL femoral attachment. The tibial attachment center was 15.0 ± 3.6 mm proximal to the center of the proximal sMCL tibial attachment and 41.1 ± 5.3 mm proximal to the center of the proximal edge of the distal sMCL tibial attachment. Conclusion: The dMCL demonstrated a broad and consistent anatomic footprint. Substantial anteromedial capsular expansion was consistently identified, extending anteriorly beyond the historically described narrow midthird capsular ligament deep to the sMCL. Clinical Relevance: These findings provide an updated qualitative and quantitative anatomic framework for future biomechanical investigations and should assist the surgical identification and radiographic assessment of the dMCL during medial-sided knee reconstruction procedures.
- 26 October 2026
- Published by SAGE Publications in The American Journal of Sports Medicine
The Deep Medial Collateral Ligament, Part 1: Quantitative, Qualitative, and Radiographic Anatomy
Background: The deep medial collateral ligament (dMCL) has historically been described as capsular thickening with meniscofemoral and meniscotibial components deep to the superficial medial collateral ligament (sMCL). However, recent investigations suggest that the dMCL includes capsular expansion beyond the traditionally described midthird ligament region. Purpose: To define the attachment geometry and radiographic relationships of the dMCL using 3-dimensional coordinate mapping and standardized radiographic correlation. Study Design: Descriptive laboratory study. Methods: A total of 10 fresh-frozen cadaveric knees (mean age, 70.7 ± 6.8 years) were dissected to isolate the dMCL. A 6 degrees of freedom robotic testing apparatus with motion capture established 3-dimensional specimen-specific coordinate systems. The periphery of each femoral and tibial attachment site was digitized to determine attachment site geometry and spatial relationships to key medial landmarks. Radiopaque markers enabled standardized anteroposterior and lateral radiographic measurements. Results: Qualitatively, the dMCL demonstrated broad anteromedial capsular extension, with an anterior margin length of 27.0 ± 3.4 mm from the posterior aspect of the sMCL. Posteriorly, the dMCL blended with the anterior margin of the posterior oblique ligament. The femoral attachment was 10.7 ± 1.5 mm in anteroposterior width. The center of the femoral attachment of the dMCL was located 5.1 ± 2.0 mm posterior and 12.4 ± 3.5 mm distal to the medial epicondyle as well as 10.6 ± 3.2 mm distal to the center of the sMCL femoral attachment. The tibial attachment was 29.3 ± 3.7 mm in anteroposterior width and was located 2.2 ± 0.8 mm distal to the joint line. Radiographically, the center of the dMCL femoral attachment was 7.9 ± 2.9 mm from the center of the sMCL femoral attachment. The tibial attachment center was 15.0 ± 3.6 mm proximal to the center of the proximal sMCL tibial attachment and 41.1 ± 5.3 mm proximal to the center of the proximal edge of the distal sMCL tibial attachment. Conclusion: The dMCL demonstrated a broad and consistent anatomic footprint. Substantial anteromedial capsular expansion was consistently identified, extending anteriorly beyond the historically described narrow midthird capsular ligament deep to the sMCL. Clinical Relevance: These findings provide an updated qualitative and quantitative anatomic framework for future biomechanical investigations and should assist the surgical identification and radiographic assessment of the dMCL during medial-sided knee reconstruction procedures.
- Open Access
- 30 September 2026
- Published by SAGE Publications in Video Journal of Sports Medicine
- Vol. 6 (5)
Fibular Collateral Ligament Reconstruction With Biceps Femoris Tendon Repair and Lateral Meniscal Radial Tear Repair With Combined Transtibial Tunnel Fixation and Inside-Out Hashtag Technique
Background: The fibular collateral ligament (FCL) is the primary restraint to varus stress at the knee. Concomitant injuries are common, including disruption of the menisci and the biceps femoris tendon. Radial tears of the lateral meniscus may occur with FCL injuries, and preservation through repair helps maintain the meniscal function. Indications: When an FCL injury is inadequately treated, patients may experience persistent instability, premature osteoarthritis, and an increased risk of graft failure in the setting of concurrent cruciate ligament injury. Anatomic FCL reconstruction (FCLR) has been shown to be preferable over repair. It is important to address all concomitant pathology associated with an FCL tear, given the known risk of progression to osteoarthritis. A widely separated radial tear may be addressed with a combined approach that includes a transtibial tunnel and an inside-out hashtag suture technique to achieve optimal reduction and fixation. Technique Description: The technique described was for an FCLR with a semitendinosus autograft, with concomitant repair of a lateral meniscus radial tear using a transtibial tunnel and inside-out hashtag technique. The femoral and tibial tunnels for the FCL were created first. A semitendinosus autograft was then harvested and prepared for an anatomic FCLR. Arthroscopy demonstrated a completely separated radial tear of the lateral meniscus, which was reduced through a transtibial tunnel. Inside-out vertical and horizontal mattress sutures were then placed to complete a hashtag repair. The FCL graft was fixed, and the torn biceps femoris tendon was repaired to the fibular head with a suture anchor. Results: Recent literature demonstrates favorable clinical outcome scores and patient satisfaction with anatomic FCLR. Another study reports an 80% clinical success rate for radial meniscal repair, with the lack of a transtibial tunnel being a potential risk factor for failure in patients with widely separated tears, supporting this comprehensive surgical strategy. Discussion/Conclusion: Combined lateral knee injuries require careful evaluation, and it is important to address all associated pathology. For widely separated radial meniscal tears, combining a transtibial tunnel approach with a hashtag inside-out suture configuration can create a stable construct that reapproximates the tear and facilitates healing. Patient Consent Disclosure Statement: The author(s) attests that consent has been obtained from any patient(s) appearing in this publication. If the individual may be identifiable, the author(s) has included a statement of release or other written form of approval from the patient(s) with this submission for publication.
- 30 September 2026
- Published by SAGE Publications in Video Journal of Sports Medicine
- Vol. 6 (5)
Open AccessFibular Collateral Ligament Reconstruction With Biceps Femoris Tendon Repair and Lateral Meniscal Radial Tear Repair With Combined Transtibial Tunnel Fixation and Inside-Out Hashtag Technique
Background: The fibular collateral ligament (FCL) is the primary restraint to varus stress at the knee. Concomitant injuries are common, including disruption of the menisci and the biceps femoris tendon. Radial tears of the lateral meniscus may occur with FCL injuries, and preservation through repair helps maintain the meniscal function. Indications: When an FCL injury is inadequately treated, patients may experience persistent instability, premature osteoarthritis, and an increased risk of graft failure in the setting of concurrent cruciate ligament injury. Anatomic FCL reconstruction (FCLR) has been shown to be preferable over repair. It is important to address all concomitant pathology associated with an FCL tear, given the known risk of progression to osteoarthritis. A widely separated radial tear may be addressed with a combined approach that includes a transtibial tunnel and an inside-out hashtag suture technique to achieve optimal reduction and fixation. Technique Description: The technique described was for an FCLR with a semitendinosus autograft, with concomitant repair of a lateral meniscus radial tear using a transtibial tunnel and inside-out hashtag technique. The femoral and tibial tunnels for the FCL were created first. A semitendinosus autograft was then harvested and prepared for an anatomic FCLR. Arthroscopy demonstrated a completely separated radial tear of the lateral meniscus, which was reduced through a transtibial tunnel. Inside-out vertical and horizontal mattress sutures were then placed to complete a hashtag repair. The FCL graft was fixed, and the torn biceps femoris tendon was repaired to the fibular head with a suture anchor. Results: Recent literature demonstrates favorable clinical outcome scores and patient satisfaction with anatomic FCLR. Another study reports an 80% clinical success rate for radial meniscal repair, with the lack of a transtibial tunnel being a potential risk factor for failure in patients with widely separated tears, supporting this comprehensive surgical strategy. Discussion/Conclusion: Combined lateral knee injuries require careful evaluation, and it is important to address all associated pathology. For widely separated radial meniscal tears, combining a transtibial tunnel approach with a hashtag inside-out suture configuration can create a stable construct that reapproximates the tear and facilitates healing. Patient Consent Disclosure Statement: The author(s) attests that consent has been obtained from any patient(s) appearing in this publication. If the individual may be identifiable, the author(s) has included a statement of release or other written form of approval from the patient(s) with this submission for publication.
- Open Access
- 11 September 2026
- Published by SAGE Publications in Video Journal of Sports Medicine
- Vol. 6 (5)
Patellar Tendon Reconstruction After Failed Patellar Tendon Repair With a Concomitant Double-Bundle Posterior Cruciate Ligament Reconstruction and Medial Collateral Ligament Reconstruction
Background: Patellar tendon ruptures are a relatively uncommon injury that results from a contraction of the quadriceps against a fixed eccentric load during partial knee flexion. The medial collateral ligament (MCL) and posterior cruciate ligament (PCL) are frequently injured together, and their reconstitution should follow anatomic reconstruction techniques. Indications: In a previously failed patellar tendon repair, a reconstruction with an allograft is indicated due to poor tissue quality. The failed patellar tendon repair was further complicated by a chronic PCL tear and a chronic high-grade MCL sprain, confirmed through a physical examination and imaging. A double-bundle PCL reconstruction and MCL reconstruction were performed during the revision of the patellar tendon reconstruction to further stabilize the knee. Technique Description: The technique described was for a patellar tendon reconstruction with a concomitant double-bundle PCL reconstruction and MCL reconstruction after a failed patellar tendon repair in the presence of chronic PCL and MCL tears. First, hamstring autografts were harvested for anatomic MCL reconstruction and subsequently fixated distally. Next, tunnels were created through the tibial tubercle and the patella for patellar tendon reconstruction using a hamstring allograft. Then, femoral tunnels for both bundles of the PCL and the correlating tibial tunnel were prepared. After an arthroscopic assessment of the knee joint, the double-bundle PCL allografts were passed and fixed in their respective tunnels. Lastly, the proximal MCL autograft was fixed in a femoral tunnel, and the patellar tendon reconstruction grafts were passed and secured. Results: Recent literature has supported the use of a patellar tendon reconstruction in the setting of a failed repair and chronic patellar tendon rupture. Outcomes are favorable among metrics, including knee range of motion, extension lag, and modified Cincinnati and Kujala scores. Discussion/Conclusion: Recent literature has demonstrated improved functional outcomes with anatomic reconstructions of the patellar tendon, MCL, and PCL. A patellar tendon reconstruction after a failed repair with a concomitant double-bundle PCL reconstruction and MCL reconstruction is described, along with technical considerations, to improve chances of favorable outcomes and minimize the risks of complications. Patient Consent Disclosure Statement: The author(s) attests that consent has been obtained from any patient(s) appearing in this publication. If the individual may be identifiable, the author(s) has included a statement of release or other written form of approval from the patient(s) with this submission for publication.
- 11 September 2026
- Published by SAGE Publications in Video Journal of Sports Medicine
- Vol. 6 (5)
Open AccessPatellar Tendon Reconstruction After Failed Patellar Tendon Repair With a Concomitant Double-Bundle Posterior Cruciate Ligament Reconstruction and Medial Collateral Ligament Reconstruction
Background: Patellar tendon ruptures are a relatively uncommon injury that results from a contraction of the quadriceps against a fixed eccentric load during partial knee flexion. The medial collateral ligament (MCL) and posterior cruciate ligament (PCL) are frequently injured together, and their reconstitution should follow anatomic reconstruction techniques. Indications: In a previously failed patellar tendon repair, a reconstruction with an allograft is indicated due to poor tissue quality. The failed patellar tendon repair was further complicated by a chronic PCL tear and a chronic high-grade MCL sprain, confirmed through a physical examination and imaging. A double-bundle PCL reconstruction and MCL reconstruction were performed during the revision of the patellar tendon reconstruction to further stabilize the knee. Technique Description: The technique described was for a patellar tendon reconstruction with a concomitant double-bundle PCL reconstruction and MCL reconstruction after a failed patellar tendon repair in the presence of chronic PCL and MCL tears. First, hamstring autografts were harvested for anatomic MCL reconstruction and subsequently fixated distally. Next, tunnels were created through the tibial tubercle and the patella for patellar tendon reconstruction using a hamstring allograft. Then, femoral tunnels for both bundles of the PCL and the correlating tibial tunnel were prepared. After an arthroscopic assessment of the knee joint, the double-bundle PCL allografts were passed and fixed in their respective tunnels. Lastly, the proximal MCL autograft was fixed in a femoral tunnel, and the patellar tendon reconstruction grafts were passed and secured. Results: Recent literature has supported the use of a patellar tendon reconstruction in the setting of a failed repair and chronic patellar tendon rupture. Outcomes are favorable among metrics, including knee range of motion, extension lag, and modified Cincinnati and Kujala scores. Discussion/Conclusion: Recent literature has demonstrated improved functional outcomes with anatomic reconstructions of the patellar tendon, MCL, and PCL. A patellar tendon reconstruction after a failed repair with a concomitant double-bundle PCL reconstruction and MCL reconstruction is described, along with technical considerations, to improve chances of favorable outcomes and minimize the risks of complications. Patient Consent Disclosure Statement: The author(s) attests that consent has been obtained from any patient(s) appearing in this publication. If the individual may be identifiable, the author(s) has included a statement of release or other written form of approval from the patient(s) with this submission for publication.
- 4 June 2026
- Published by SAGE Publications in The American Journal of Sports Medicine
- Vol. 54 (9) , 2120-2129
Restoration of Anterior Tibial Translation Is Achievable With an Anterior Cruciate Ligament Reconstruction and Ramp Repair With Increasing Posterior Tibial Slope While Medial Meniscus Deficiency Requires Concomitant Slope-Correcting Osteotomy
Background: Previous studies have demonstrated that as posterior tibial slope (PTS) increases, increased force is transmitted through anterior cruciate ligament (ACL) grafts, but limited literature assesses PTS effects on anterior tibial translation (ATT) with concomitant medial meniscus (MM) pathology. Purpose: To investigate the effects of varying PTS angles on ATT in the presence of MM ramp tear and MM subtotal meniscectomy in the setting of ACL-sectioned and ACL-reconstructed knees. Study Design: Controlled laboratory study. Methods: Ten male matched-paired cadaveric knees underwent a posterior tibial osteotomy. Specimens were robotically assessed for ATT changes to an 88-N anterior tibial load at 30° and 90° of flexion. Slopes of 0°, 4°, 7°, 9°, 12°, 15°, 18°, and 21° were tested: ACL-intact, ACL-sectioned, ACL-sectioned and MM ramp tear, ACL reconstruction (ACLR) and MM ramp tear, and ACLR and MM ramp repair for group 1; and ACL-intact, ACL-sectioned, ACL-sectioned and subtotal medial meniscectomy, and ACLR and subtotal medial meniscectomy for group 2. Results: The baseline tibial position (BTP) and PTS in ACL-intact knees demonstrated a significant positive linear relationship ( P < .001) at 30° of flexion. There was no significant ATT difference between ACL-sectioned states across all tested PTS angles at 30° of flexion ( P > .63). The ACL-sectioned and MM ramp tear state had significantly increased ATT compared to the ACL-intact state at all tested PTS angles at 30° of flexion ( P < .001). An ACLR and residual ramp tear had significantly increased ATT compared to the ACL-intact state at PTS angles of 4°, 7°, 9°, and 18° at 30° of flexion ( P < .04). The ATT of the ACLR and ramp repair was not significantly different from that of the ACL-intact state at all PTS angles at 30° of flexion ( P > .34). The ACLR and subtotal medial meniscectomy state had a significantly increased ATT compared to the ACL-intact state at PTS angles of 15° and 21° at 30° (all P < .04) and 18° and 21° at 90° of flexion (all P < .04). Conclusion: This biomechanical cadaveric study demonstrated that as PTS increases, the BTP in intact knees shifts anterior and the absolute amount of ATT with ACL sectioning does not increase as PTS increases. Also, increases in ATT were found for an ACLR with a nonrepaired MM ramp tear, while a concomitant ramp repair restored ATT to intact. Also, an ACLR with a subtotal medial meniscectomy resulted in increases in ATT with a PTS >12°. Clinical Relevance: A slope-reducing tibial osteotomy may be considered in knees with >12° PTS undergoing ACLR with a subtotal medial meniscectomy to optimally protect an ACLR graft. An MM ramp repair is needed with ACLR to restore ATT.
- 4 June 2026
- Published by SAGE Publications in The American Journal of Sports Medicine
- Vol. 54 (9) , 2120-2129
Restoration of Anterior Tibial Translation Is Achievable With an Anterior Cruciate Ligament Reconstruction and Ramp Repair With Increasing Posterior Tibial Slope While Medial Meniscus Deficiency Requires Concomitant Slope-Correcting Osteotomy
Background: Previous studies have demonstrated that as posterior tibial slope (PTS) increases, increased force is transmitted through anterior cruciate ligament (ACL) grafts, but limited literature assesses PTS effects on anterior tibial translation (ATT) with concomitant medial meniscus (MM) pathology. Purpose: To investigate the effects of varying PTS angles on ATT in the presence of MM ramp tear and MM subtotal meniscectomy in the setting of ACL-sectioned and ACL-reconstructed knees. Study Design: Controlled laboratory study. Methods: Ten male matched-paired cadaveric knees underwent a posterior tibial osteotomy. Specimens were robotically assessed for ATT changes to an 88-N anterior tibial load at 30° and 90° of flexion. Slopes of 0°, 4°, 7°, 9°, 12°, 15°, 18°, and 21° were tested: ACL-intact, ACL-sectioned, ACL-sectioned and MM ramp tear, ACL reconstruction (ACLR) and MM ramp tear, and ACLR and MM ramp repair for group 1; and ACL-intact, ACL-sectioned, ACL-sectioned and subtotal medial meniscectomy, and ACLR and subtotal medial meniscectomy for group 2. Results: The baseline tibial position (BTP) and PTS in ACL-intact knees demonstrated a significant positive linear relationship ( P < .001) at 30° of flexion. There was no significant ATT difference between ACL-sectioned states across all tested PTS angles at 30° of flexion ( P > .63). The ACL-sectioned and MM ramp tear state had significantly increased ATT compared to the ACL-intact state at all tested PTS angles at 30° of flexion ( P < .001). An ACLR and residual ramp tear had significantly increased ATT compared to the ACL-intact state at PTS angles of 4°, 7°, 9°, and 18° at 30° of flexion ( P < .04). The ATT of the ACLR and ramp repair was not significantly different from that of the ACL-intact state at all PTS angles at 30° of flexion ( P > .34). The ACLR and subtotal medial meniscectomy state had a significantly increased ATT compared to the ACL-intact state at PTS angles of 15° and 21° at 30° (all P < .04) and 18° and 21° at 90° of flexion (all P < .04). Conclusion: This biomechanical cadaveric study demonstrated that as PTS increases, the BTP in intact knees shifts anterior and the absolute amount of ATT with ACL sectioning does not increase as PTS increases. Also, increases in ATT were found for an ACLR with a nonrepaired MM ramp tear, while a concomitant ramp repair restored ATT to intact. Also, an ACLR with a subtotal medial meniscectomy resulted in increases in ATT with a PTS >12°. Clinical Relevance: A slope-reducing tibial osteotomy may be considered in knees with >12° PTS undergoing ACLR with a subtotal medial meniscectomy to optimally protect an ACLR graft. An MM ramp repair is needed with ACLR to restore ATT.
- Open Access
- 1 March 2026
- Published by SAGE Publications in Video Journal of Sports Medicine
- Vol. 6 (2)
Second-Stage Revision Anterior Cruciate Ligament Reconstruction After Three Failures With Anterolateral Ligament Reconstruction, Medial Meniscal Root Repair With Centralization Suture, and Inside-Out Lateral Meniscal Repair
Background: Anterior cruciate ligament (ACL) graft failure is a relatively common occurrence and is even more likely in the presence of medial meniscal deficiency. ACL tears cause significant knee instability, particularly anterolaterally, and are commonly treated with a surgical reconstruction. Indications: During a revision ACL reconstruction (ACLR), clinical studies have demonstrated that correcting medial meniscus pathologies and reconstructing the anterolateral ligament (ALL) improve outcomes. This is the patient's fourth ACLR, complicated by a concomitant extruded medial meniscal root tear, and confirmed on clinical examination and imaging. An ALL reconstruction (ALLR) and medial meniscal root repair with a centralization suture were therefore indicated during the revision ACLR. Technique Description: The technique described was used for a revision ACLR after 3 failed reconstructions with a concomitant ALLR and lateral meniscal peripheral and medial meniscal root repair as part of the second stage of a 2-stage surgery. The first stage of surgery included ACL tunnel debridement and bone grafting. The second stage procedure described here included a revision ACLR with bone-patellar tendon-bone autograft and an ALLR using the inferior portion of the iliotibial band, fixated with suture anchors to recreate the anatomic proximal and distal attachment sites. For the menisci, a lateral meniscal posterolateral peripheral tear was repaired using an inside-out technique, and the medial meniscal root tear was repaired with a double transtibial tunnel root repair with a centralization suture to reduce extrusion. Results: Recent literature has demonstrated that rerevision ACLR improved functional outcomes and overall knee stability. Despite these improvements, the overall rate of return to preinjury activity levels was poor, with high inter-study variability. Discussion: A complex revision ACLR with an ALLR and multiple meniscal repairs is described, along with technical considerations to improve long-term outcomes and minimize complication risks. Patient Consent Disclosure Statement: The author(s) attests that consent has been obtained from any patient(s) appearing in this publication. If the individual may be identifiable, the author(s) has included a statement of release or other written form of approval from the patient(s) with this submission for publication.
- 1 March 2026
- Published by SAGE Publications in Video Journal of Sports Medicine
- Vol. 6 (2)
Open AccessSecond-Stage Revision Anterior Cruciate Ligament Reconstruction After Three Failures With Anterolateral Ligament Reconstruction, Medial Meniscal Root Repair With Centralization Suture, and Inside-Out Lateral Meniscal Repair
Background: Anterior cruciate ligament (ACL) graft failure is a relatively common occurrence and is even more likely in the presence of medial meniscal deficiency. ACL tears cause significant knee instability, particularly anterolaterally, and are commonly treated with a surgical reconstruction. Indications: During a revision ACL reconstruction (ACLR), clinical studies have demonstrated that correcting medial meniscus pathologies and reconstructing the anterolateral ligament (ALL) improve outcomes. This is the patient's fourth ACLR, complicated by a concomitant extruded medial meniscal root tear, and confirmed on clinical examination and imaging. An ALL reconstruction (ALLR) and medial meniscal root repair with a centralization suture were therefore indicated during the revision ACLR. Technique Description: The technique described was used for a revision ACLR after 3 failed reconstructions with a concomitant ALLR and lateral meniscal peripheral and medial meniscal root repair as part of the second stage of a 2-stage surgery. The first stage of surgery included ACL tunnel debridement and bone grafting. The second stage procedure described here included a revision ACLR with bone-patellar tendon-bone autograft and an ALLR using the inferior portion of the iliotibial band, fixated with suture anchors to recreate the anatomic proximal and distal attachment sites. For the menisci, a lateral meniscal posterolateral peripheral tear was repaired using an inside-out technique, and the medial meniscal root tear was repaired with a double transtibial tunnel root repair with a centralization suture to reduce extrusion. Results: Recent literature has demonstrated that rerevision ACLR improved functional outcomes and overall knee stability. Despite these improvements, the overall rate of return to preinjury activity levels was poor, with high inter-study variability. Discussion: A complex revision ACLR with an ALLR and multiple meniscal repairs is described, along with technical considerations to improve long-term outcomes and minimize complication risks. Patient Consent Disclosure Statement: The author(s) attests that consent has been obtained from any patient(s) appearing in this publication. If the individual may be identifiable, the author(s) has included a statement of release or other written form of approval from the patient(s) with this submission for publication.
- Open Access
- 1 January 2026
- Published by Wiley in Arthroscopy Techniques
- Vol. 15 (1) , e70006
Iliotibial Band Meniscal Augmentation for a Revision Inside‐Out Lateral Meniscus Radial and Horizontal Cleavage Tear Repair
Surgical repair of complex meniscal tears can be quite challenging, especially in the case of a failed meniscus repair. In this setting, meniscal volume may be lost, leading to an increased risk of osteoarthritis development. To prevent this from occurring, care should be taken to revise these complex tears using an inside‐out technique. Further, a meniscal augmentation may be indicated to increase the volume of the meniscus. This technical note describes a technique using an iliotibial band (ITB) meniscal augmentation for a lateral meniscus revision inside‐out radial and horizontal cleavage tear repair. An ITB graft is sutured over the meniscal repair zone with inside‐out sutures to increase the meniscal volume and chance of meniscus healing.
- 1 January 2026
- Published by Wiley in Arthroscopy Techniques
- Vol. 15 (1) , e70006
Open AccessIliotibial Band Meniscal Augmentation for a Revision Inside‐Out Lateral Meniscus Radial and Horizontal Cleavage Tear Repair
Surgical repair of complex meniscal tears can be quite challenging, especially in the case of a failed meniscus repair. In this setting, meniscal volume may be lost, leading to an increased risk of osteoarthritis development. To prevent this from occurring, care should be taken to revise these complex tears using an inside‐out technique. Further, a meniscal augmentation may be indicated to increase the volume of the meniscus. This technical note describes a technique using an iliotibial band (ITB) meniscal augmentation for a lateral meniscus revision inside‐out radial and horizontal cleavage tear repair. An ITB graft is sutured over the meniscal repair zone with inside‐out sutures to increase the meniscal volume and chance of meniscus healing.