Suk Hoon Kang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Suk Hoon Kang has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Ho Jin Ryu
Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, Republic of Korea
2 shared publications - Joowon Suh
Korea Atomic Energy Research Institute, Materials Safety Technology Development Division, Daejeon 34057, Republic of Korea
2 shared publications Avinash Chavan
1 shared publication- Chaerin Kim1 shared publication
- Chang Kyu Rhee
Korea Atomic Energy Research Institute
1 shared publication G. Cao
University of Washington, Seattle, WA 98195, USA
1 shared publication
Latest Publications
- Open Access
- 22 June 2026
- Published by Polish Academy of Sciences Chancellery in Archives of Metallurgy and Materials
- Vol. 71 (2) , 579-582
Effect of Ceramic Crucible (Al2O3 or MgO) on Y Pre-Alloyed Ferritic Steel Fabricated by Vacuum Induction Melting
In this study, yttrium (Y) pre-alloyed ferritic steel was produced by vacuum induction melting casting. During casting, two types of ceramic crucible, Al2O3 and MgO, were used. The initial Y content was set to 1.2 wt.% in Fe-14.6Cr (in wt.%) ferritic steel. Inductively coupled plasma-atomic emission spectroscopy revealed that the remaining Y content was 0.04 wt.% in ferritic steel using an Al2O3 crucible, compared with 1.06 wt.% in steel using an MgO crucible. Energy dispersive X-ray spectroscopy analysis confirmed the formation of Y-Al-O oxides in ferritic steel (Al2O3), while X-ray diffraction detected the Fe5Y phase in ferritic steel (MgO). According to reported Y2O3-Al2O3 and Y2O3-MgO phase diagrams, Y2O3 is insoluble in Al2O3 but soluble in MgO. These results indicate that the MgO crucible is more suitable for preventing Y loss during vacuum induction melting.
- 22 June 2026
- Published by Polish Academy of Sciences Chancellery in Archives of Metallurgy and Materials
- Vol. 71 (2) , 579-582
Open AccessEffect of Ceramic Crucible (Al2O3 or MgO) on Y Pre-Alloyed Ferritic Steel Fabricated by Vacuum Induction Melting
In this study, yttrium (Y) pre-alloyed ferritic steel was produced by vacuum induction melting casting. During casting, two types of ceramic crucible, Al2O3 and MgO, were used. The initial Y content was set to 1.2 wt.% in Fe-14.6Cr (in wt.%) ferritic steel. Inductively coupled plasma-atomic emission spectroscopy revealed that the remaining Y content was 0.04 wt.% in ferritic steel using an Al2O3 crucible, compared with 1.06 wt.% in steel using an MgO crucible. Energy dispersive X-ray spectroscopy analysis confirmed the formation of Y-Al-O oxides in ferritic steel (Al2O3), while X-ray diffraction detected the Fe5Y phase in ferritic steel (MgO). According to reported Y2O3-Al2O3 and Y2O3-MgO phase diagrams, Y2O3 is insoluble in Al2O3 but soluble in MgO. These results indicate that the MgO crucible is more suitable for preventing Y loss during vacuum induction melting.
- Open Access
- 21 August 2025
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 38, 4221-4233
Beyond reinforcement: Unveiling in-situ solute engineering via TiN decomposition for enhanced high-temperature performance of additively manufactured Inconel 718
- 21 August 2025
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 38, 4221-4233
Open AccessBeyond reinforcement: Unveiling in-situ solute engineering via TiN decomposition for enhanced high-temperature performance of additively manufactured Inconel 718
- 6 March 2023
- Published by Polish Academy of Sciences Chancellery in Archives of Metallurgy and Materials
- Vol. 68 (1) , 191-194
Lithium-Ion Conductive Film Membrane of Li 0.3La 0.57TiO 2 Perovskite Structure and its Application in Li-Air Batteries
Impacts of precursor solution recipe, processing parameters, and pellet thickness on the lithium ionic conductivity of the ceramic materials with perovskite structure of Li 0.3La 0.57TiO 2 0.3La 0.57TiO 2 0.3La 0.57TiO 22 (i.e., TiO 2 sol) and then Li+ and La+ were added to the colloidal TiO 2 was on the order of 10-5 S/cm. It also showed that the temperatures corresponding to a full decomposition for Li 0.3La 0.57TiO 2 is about 750°C and materials start forming perovskite structure when temperature reaches about 900°C and the lithium ionic conductivity gains about 21% increase when the pellet thickness is reduced to about ¼.
- 6 March 2023
- Published by Polish Academy of Sciences Chancellery in Archives of Metallurgy and Materials
- Vol. 68 (1) , 191-194
Lithium-Ion Conductive Film Membrane of Li 0.3La 0.57TiO 2 Perovskite Structure and its Application in Li-Air Batteries
Impacts of precursor solution recipe, processing parameters, and pellet thickness on the lithium ionic conductivity of the ceramic materials with perovskite structure of Li 0.3La 0.57TiO 2 0.3La 0.57TiO 2 0.3La 0.57TiO 22 (i.e., TiO 2 sol) and then Li+ and La+ were added to the colloidal TiO 2 was on the order of 10-5 S/cm. It also showed that the temperatures corresponding to a full decomposition for Li 0.3La 0.57TiO 2 is about 750°C and materials start forming perovskite structure when temperature reaches about 900°C and the lithium ionic conductivity gains about 21% increase when the pellet thickness is reduced to about ¼.