Istyawan Priyahapsara
Istyawan Priyahapsara has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Dwi Hartini
Department of Aerospace Engineering, ITD Adisutjipto
3 shared publications - Elisabeth Anna Prattiwi
Department of Aerospace Engineering, ITD Adisutjipto
3 shared publications - Fajar Khanif Rahmawati
Institut Teknologi Dirgantara Adisutjipto
2 shared publications Amalia Kamila
Department of Aerospace Engineering, ITD Adisutjipto
1 shared publicationAshyadil Listyo Rachmanto
1 shared publication- Bangga Dirgantara Adiputra
Department of Aerospace Engineering, ITD Adisutjipto, Indonesia
1 shared publication
Latest Publications
- Open Access
- 22 January 2026
- Published by Institut Teknologi Dirgantara Adisutjipto (ITDA) in Vortex
- Vol. 6 (2) , 46-52
Analysis of Vibration Characteristics of EFT-E610P Drone Using Modal Analysis Method
This research examines the vibration characteristics of the EFT-E610P type agricultural drone through flight tests and modal analysis. It aims to identify and analyze vibration properties like amplitude deviation, period, frequency, and waveform in the drone's mechanical system to ensure flight stability and safety. The study collects real-time vibration data using accelerometer sensors, processes it using Fourier transform, and interprets the main vibration features. Results show that the vibration parameters remain within a reasonable range corresponding to the drone’s natural structural properties, with no signs of instability or harmful oscillations. Amplitude fluctuations and dominant frequency shifts indicate the drone’s dynamic response to speed and structural changes but remain stable. The study concludes that the EFT-E610P drone exhibits normal vibration behavior during tests, with no negative impact on flight performance or safety, supporting its effective operation.
- 22 January 2026
- Published by Institut Teknologi Dirgantara Adisutjipto (ITDA) in Vortex
- Vol. 6 (2) , 46-52
Open AccessAnalysis of Vibration Characteristics of EFT-E610P Drone Using Modal Analysis Method
This research examines the vibration characteristics of the EFT-E610P type agricultural drone through flight tests and modal analysis. It aims to identify and analyze vibration properties like amplitude deviation, period, frequency, and waveform in the drone's mechanical system to ensure flight stability and safety. The study collects real-time vibration data using accelerometer sensors, processes it using Fourier transform, and interprets the main vibration features. Results show that the vibration parameters remain within a reasonable range corresponding to the drone’s natural structural properties, with no signs of instability or harmful oscillations. Amplitude fluctuations and dominant frequency shifts indicate the drone’s dynamic response to speed and structural changes but remain stable. The study concludes that the EFT-E610P drone exhibits normal vibration behavior during tests, with no negative impact on flight performance or safety, supporting its effective operation.
- Open Access
- 22 January 2026
- Published by Institut Teknologi Dirgantara Adisutjipto (ITDA) in Vortex
- Vol. 6 (2) , 53-60
Analysis Problem of Air Bleed Maintenance Message Using Fault Tree Analysis (FTA) Method
The Airbus A320 has two main engines and an Auxiliary Power Unit (APU) that generate high-temperature, high-pressure bleed air used for cabin cooling, anti-icing, and pressurization. Two temperature sensors, Fire Loop A and Fire Loop B, monitor the bleed air distribution line for hot air leaks. An Air Bleed Maintenance Message signals a malfunction in these fire protection loops and requires quick maintenance to avoid system failure. Leaks, especially near the wing and fuel tank, pose significant hazards. This study uses Fault Tree Analysis (FTA) to find the root causes of this message. The main causes identified are damaged interconnecting cables, failure in the Bleed Monitoring Computer (BMC), and faults in Fire Loop A or B. The FTA diagram helps technicians trace each component's role in the failure, aiding efficient inspection and maintenance. This method aims to boost system reliability and improve flight safety.
- 22 January 2026
- Published by Institut Teknologi Dirgantara Adisutjipto (ITDA) in Vortex
- Vol. 6 (2) , 53-60
Open AccessAnalysis Problem of Air Bleed Maintenance Message Using Fault Tree Analysis (FTA) Method
The Airbus A320 has two main engines and an Auxiliary Power Unit (APU) that generate high-temperature, high-pressure bleed air used for cabin cooling, anti-icing, and pressurization. Two temperature sensors, Fire Loop A and Fire Loop B, monitor the bleed air distribution line for hot air leaks. An Air Bleed Maintenance Message signals a malfunction in these fire protection loops and requires quick maintenance to avoid system failure. Leaks, especially near the wing and fuel tank, pose significant hazards. This study uses Fault Tree Analysis (FTA) to find the root causes of this message. The main causes identified are damaged interconnecting cables, failure in the Bleed Monitoring Computer (BMC), and faults in Fire Loop A or B. The FTA diagram helps technicians trace each component's role in the failure, aiding efficient inspection and maintenance. This method aims to boost system reliability and improve flight safety.
- 11 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Enhancement on the Mechanical Properties of Dissimilar Friction Stir Welded Aluminum Alloys Potential for Aircraft Application
This study investigates the effect of feed rate variation on the mechanical properties of dissimilar aluminum alloy joints, specifically Al 2524-T3 and Al 7055-T7, created through Friction Stir Welding (FSW). Using feed rates of 45, 60, and 75 mm/min at a fixed spindle speed of 1500 rpm and a tilt angle of 2°, we evaluated bending strength, Brinell hardness, and a Mechanical Property Index (MPI) to assess weld quality. Results indicate that a feed rate of 75 mm/min yields the highest bending strength (215.15 MPa) and hardness (42.81 BHN), correlating with an MPI of 1.0, which demonstrates optimal performance. The lower feed rates resulted in lower mechanical properties due to insufficient heat generation. This work highlights the critical influence of feed rate on FSW joint quality in aerospace-relevant dissimilar aluminum alloys.
- 11 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Enhancement on the Mechanical Properties of Dissimilar Friction Stir Welded Aluminum Alloys Potential for Aircraft Application
This study investigates the effect of feed rate variation on the mechanical properties of dissimilar aluminum alloy joints, specifically Al 2524-T3 and Al 7055-T7, created through Friction Stir Welding (FSW). Using feed rates of 45, 60, and 75 mm/min at a fixed spindle speed of 1500 rpm and a tilt angle of 2°, we evaluated bending strength, Brinell hardness, and a Mechanical Property Index (MPI) to assess weld quality. Results indicate that a feed rate of 75 mm/min yields the highest bending strength (215.15 MPa) and hardness (42.81 BHN), correlating with an MPI of 1.0, which demonstrates optimal performance. The lower feed rates resulted in lower mechanical properties due to insufficient heat generation. This work highlights the critical influence of feed rate on FSW joint quality in aerospace-relevant dissimilar aluminum alloys.
- Open Access
- 29 June 2023
- Published by Institut Teknologi Dirgantara Adisutjipto (ITDA) in Vortex
- Vol. 4 (2)
KAJIAN POTENSI PEMBANGKIT LISTRIK TENAGA SURYA DI BANDARA SULTAN ISKANDAR MUDA BANDA ACEH
Sources of electrical energy in Indonesia still use a lot of conversion results from fossil energy such as coal, gas and oil. This fossil energy source is getting less and less and the price keeps going up and contributes a lot of carbon gas emissions that are released into the air, renewable energy, such as solar energy, wind, hydropower, and biomass are alternative energy sources that are environmentally friendly. which needs to be further developed in the future.The author's analysis will take into account the effect of implementing solar panels on several obstacles to the failure of the electricity supply from PLN at Sultan Iskandar Muda International Airport. The purpose of implementing solar panels is to overcome the failure of PLN electricity supply, save electricity costs and reduce carbon gas emissions to the environment in a step to support the concept of an airport with green energy or Eco- Airport, in the calculation method using component analysis, the effect of temperature and also from an economic perspective on the initial investment of the project
- 29 June 2023
- Published by Institut Teknologi Dirgantara Adisutjipto (ITDA) in Vortex
- Vol. 4 (2)
Open AccessKAJIAN POTENSI PEMBANGKIT LISTRIK TENAGA SURYA DI BANDARA SULTAN ISKANDAR MUDA BANDA ACEH
Sources of electrical energy in Indonesia still use a lot of conversion results from fossil energy such as coal, gas and oil. This fossil energy source is getting less and less and the price keeps going up and contributes a lot of carbon gas emissions that are released into the air, renewable energy, such as solar energy, wind, hydropower, and biomass are alternative energy sources that are environmentally friendly. which needs to be further developed in the future.The author's analysis will take into account the effect of implementing solar panels on several obstacles to the failure of the electricity supply from PLN at Sultan Iskandar Muda International Airport. The purpose of implementing solar panels is to overcome the failure of PLN electricity supply, save electricity costs and reduce carbon gas emissions to the environment in a step to support the concept of an airport with green energy or Eco- Airport, in the calculation method using component analysis, the effect of temperature and also from an economic perspective on the initial investment of the project
- Open Access
- 4 April 2023
- Published by Universitas Muhammadiyah Yogyakarta in Quantum Teknika : Jurnal Teknik Mesin Terapan
- Vol. 4 (2) , 69-74
Keandalan Komponen Nose Wheel Assy pada Pesawat Cessna
Maintenance is taken to maintain the reliability of the components that support overall nurse performance. One of them is the landing gear which functions for all aircraft movements on the ground including taking off, landing, taxing and parking, and holding the aircraft's load while on land. Nose wheel assy is provided to hold the nose of the aircraft and maneuver while on the ground. Based on information obtained from the engineering department as well as looking at the maintenance logbook on the ATR 72-500 aircraft there was a problem with the nose wheel assy. Where these problems can result in the movement of the aircraft will be problematic. The method used is the Weibull distribution analysis method, the main objective is to determine the failure rate and the reliability of these components as well as to determine the characteristics of the failure modes caused. The parameters used in this distribution are the shape parameter (β) and the scale parameter (h). From the calculation analysis results, it can be seen that the nose wheel assy component based on time failure will function until it fails at the age of 585 hours 38 minutes and β is 3.513864. Following the provisions that apply to values β 1,the type of failure that occurs is a type of failure to wear out. While based on the cycle will function until experiencing failure at the age of 398 hours 13 minutes and β is 1.258549 Under the provisions that apply to values β 1, type failure that occurs is a type of wear out. This type of failure has the property of increasing the failure rate with increasing use, therefore for nose wheel, assy components more effective preventive maintenance is applied.This type of failure has the property of increasing the failure rate with increasing use, therefore for landing gear, assy components more effective preventive maintenance is applied.
- 4 April 2023
- Published by Universitas Muhammadiyah Yogyakarta in Quantum Teknika : Jurnal Teknik Mesin Terapan
- Vol. 4 (2) , 69-74
Open AccessKeandalan Komponen Nose Wheel Assy pada Pesawat Cessna
Maintenance is taken to maintain the reliability of the components that support overall nurse performance. One of them is the landing gear which functions for all aircraft movements on the ground including taking off, landing, taxing and parking, and holding the aircraft's load while on land. Nose wheel assy is provided to hold the nose of the aircraft and maneuver while on the ground. Based on information obtained from the engineering department as well as looking at the maintenance logbook on the ATR 72-500 aircraft there was a problem with the nose wheel assy. Where these problems can result in the movement of the aircraft will be problematic. The method used is the Weibull distribution analysis method, the main objective is to determine the failure rate and the reliability of these components as well as to determine the characteristics of the failure modes caused. The parameters used in this distribution are the shape parameter (β) and the scale parameter (h). From the calculation analysis results, it can be seen that the nose wheel assy component based on time failure will function until it fails at the age of 585 hours 38 minutes and β is 3.513864. Following the provisions that apply to values β 1,the type of failure that occurs is a type of failure to wear out. While based on the cycle will function until experiencing failure at the age of 398 hours 13 minutes and β is 1.258549 Under the provisions that apply to values β 1, type failure that occurs is a type of wear out. This type of failure has the property of increasing the failure rate with increasing use, therefore for nose wheel, assy components more effective preventive maintenance is applied.This type of failure has the property of increasing the failure rate with increasing use, therefore for landing gear, assy components more effective preventive maintenance is applied.
- Open Access
- 1 January 2023
- Published by Atlantis Press SARL
- p. 18-27
Delamination analysis of entry and exit surface with carbon-fiber-reinforced polymers composite materials (CFRP) in UAV
- 1 January 2023
- Published by Atlantis Press SARL
- p. 18-27
Open AccessDelamination analysis of entry and exit surface with carbon-fiber-reinforced polymers composite materials (CFRP) in UAV