E. G. Cheblakova
E. G. Cheblakova has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Artur R. Gareev
Research Institute of Structural Materials Based on Graphite "NIIgrafit
1 shared publication - Sergey A. Kolesnikov
Belgorod State National Research University; Korochanskaya Central District Hospital
1 shared publication - V. A. Gorina
Vyatkin R&D Institute of Graphite-Based Structural Materials (JSC “NIIgraphit”)
1 shared publication - V. I. Sapozhnikov
Vyatkin R&D Institute of Graphite-Based Structural Materials (JSC “NIIgraphit”)
1 shared publication - Yu. A. Malinina
Vyatkin R&D Institute of Graphite-Based Structural Materials (JSC “NIIgraphit”)
1 shared publication Б. С. Клеусов
1 shared publication
Latest Publications
- 30 December 2023
- Published by National University of Science and Technology MISiS in Powder Metallurgy аnd Functional Coatings
- Vol. 17 (4) , 34-40
Investigation of the properties of high-strength fibers by methods of physico-chemical analysis
The carbon fiber (CF) of UMT 49-12K-ER grade, manufactured by Alabuga-Volokno LLC (Umatex JSC), was the subject of an extensive study. This investigation encompassed an analysis of its physico-chemical properties. The interplanar dimensions and chemical composition of the CF were determined using X-ray diffraction and atomic emission spectroscopy. Surface properties of the CF, including specific surface area and pore size distribution, were investigated through nitrogen adsorption. The BET specific surface area was measured at 0.29 m2/g. The volume of mesopores and their size distribution were calculated using the Barrett, Joyner, and Halenda method. Additionally, an analysis of surface functional groups was conducted through a back titration method. It was observed that there was no presence of carboxyl, phenolic, or carbonyl groups. The diffraction patterns were processed with a two-component profile description model. The results of atomic emission spectral analysis revealed that silicon compounds were the dominant impurities in the chemical composition of the CF. Further investigations determined that, in an inert environment, the epoxy coupling agent used to enhance the performance properties of this CF undergoes thermal decomposition at temperatures of 300–400 °C. The CF itself does not experience weight loss when heated up to 950 °C. It was also discovered that this CF ignites in the presence of oxygen at temperatures exceeding 550 °C, surpassing the thresholds noted in previous publications for carbon fibers without such specialized additives. The results of this research have suggested new methodologies for studying carbon fibers.
- 30 December 2023
- Published by National University of Science and Technology MISiS in Powder Metallurgy аnd Functional Coatings
- Vol. 17 (4) , 34-40
Investigation of the properties of high-strength fibers by methods of physico-chemical analysis
The carbon fiber (CF) of UMT 49-12K-ER grade, manufactured by Alabuga-Volokno LLC (Umatex JSC), was the subject of an extensive study. This investigation encompassed an analysis of its physico-chemical properties. The interplanar dimensions and chemical composition of the CF were determined using X-ray diffraction and atomic emission spectroscopy. Surface properties of the CF, including specific surface area and pore size distribution, were investigated through nitrogen adsorption. The BET specific surface area was measured at 0.29 m2/g. The volume of mesopores and their size distribution were calculated using the Barrett, Joyner, and Halenda method. Additionally, an analysis of surface functional groups was conducted through a back titration method. It was observed that there was no presence of carboxyl, phenolic, or carbonyl groups. The diffraction patterns were processed with a two-component profile description model. The results of atomic emission spectral analysis revealed that silicon compounds were the dominant impurities in the chemical composition of the CF. Further investigations determined that, in an inert environment, the epoxy coupling agent used to enhance the performance properties of this CF undergoes thermal decomposition at temperatures of 300–400 °C. The CF itself does not experience weight loss when heated up to 950 °C. It was also discovered that this CF ignites in the presence of oxygen at temperatures exceeding 550 °C, surpassing the thresholds noted in previous publications for carbon fibers without such specialized additives. The results of this research have suggested new methodologies for studying carbon fibers.
- 1 January 2021
- Published by The Russian Academy of Sciences in Поверхность. Рентгеновские, синхротронные и нейтронные исследования.
- No. 4,p. 41-46
Поверхностное удельное электросопротивление углерод-углеродных композиционных материалов, полученных по технологии изостатической карбонизации
Углерод-углеродные композиционные материалы двух- и четырехмерного армирования на основе структур из углеродной конструкционной нити из полиакрилонитрильного прекурсора получены по технологии изостатической карбонизации каменноугольного пека. Методом рентгеноструктурного анализа проведена оценка различия кристаллического состояния армирующего волокна и коксовой матрицы. С помощью токовихревого метода исследовано изменение уровня поверхностного удельного электрического сопротивления в зависимости от плотности образцов и степени графитации матрицы. Показано влияние степени завершенности формирования внутренней структуры на механическую прочность и уровень удельного электрического сопротивления материала. Показано, что измерение удельного электрического сопротивления токовихревым методом может служить неразрушающим методом информативной оценки изменения структуры материала.
- 1 January 2021
- Published by The Russian Academy of Sciences in Поверхность. Рентгеновские, синхротронные и нейтронные исследования.
- No. 4,p. 41-46
Поверхностное удельное электросопротивление углерод-углеродных композиционных материалов, полученных по технологии изостатической карбонизации
Углерод-углеродные композиционные материалы двух- и четырехмерного армирования на основе структур из углеродной конструкционной нити из полиакрилонитрильного прекурсора получены по технологии изостатической карбонизации каменноугольного пека. Методом рентгеноструктурного анализа проведена оценка различия кристаллического состояния армирующего волокна и коксовой матрицы. С помощью токовихревого метода исследовано изменение уровня поверхностного удельного электрического сопротивления в зависимости от плотности образцов и степени графитации матрицы. Показано влияние степени завершенности формирования внутренней структуры на механическую прочность и уровень удельного электрического сопротивления материала. Показано, что измерение удельного электрического сопротивления токовихревым методом может служить неразрушающим методом информативной оценки изменения структуры материала.