Investigation of the properties of high-strength fibers by methods of physico-chemical analysis
- 30 December 2023
- journal article
- research article
- Published by National University of Science and Technology MISiS in Powder Metallurgy аnd Functional Coatings
- Vol. 17 (4) , 34-40
Abstract
The carbon fiber (CF) of UMT 49-12K-ER grade, manufactured by Alabuga-Volokno LLC (Umatex JSC), was the subject of an extensive study. This investigation encompassed an analysis of its physico-chemical properties. The interplanar dimensions and chemical composition of the CF were determined using X-ray diffraction and atomic emission spectroscopy. Surface properties of the CF, including specific surface area and pore size distribution, were investigated through nitrogen adsorption. The BET specific surface area was measured at 0.29 m2/g. The volume of mesopores and their size distribution were calculated using the Barrett, Joyner, and Halenda method. Additionally, an analysis of surface functional groups was conducted through a back titration method. It was observed that there was no presence of carboxyl, phenolic, or carbonyl groups. The diffraction patterns were processed with a two-component profile description model. The results of atomic emission spectral analysis revealed that silicon compounds were the dominant impurities in the chemical composition of the CF. Further investigations determined that, in an inert environment, the epoxy coupling agent used to enhance the performance properties of this CF undergoes thermal decomposition at temperatures of 300–400 °C. The CF itself does not experience weight loss when heated up to 950 °C. It was also discovered that this CF ignites in the presence of oxygen at temperatures exceeding 550 °C, surpassing the thresholds noted in previous publications for carbon fibers without such specialized additives. The results of this research have suggested new methodologies for studying carbon fibers.Keywords
This publication has 15 references indexed in Scilit:
- Market for Carbon Fibres and Composites Based on them. A reviewFibre Chemistry, 2016
- Innovative developments of FSUE «VIAM» SSC of RF on realization of «Strategic directions of the development of materials and technologies of their processing for the period until 2030»«Aviation Materials and Technologies», 2015
- Carbon Fibers: Precursor Systems, Processing, Structure, and PropertiesAngewandte Chemie International Edition, 2014
- In situ observations of fractures in short carbon fiber/epoxy compositesCarbon, 2014
- Carbon Fiber: Surface Properties2011
- Fabrication and Properties of Carbon FibersMaterials, 2009
- Carbon Fibers and Their Composites2005
- Characterisation of surface oxides on carbon and their influence on dynamic adsorptionCarbon, 2002
- Microporous texture of activated carbon fibers prepared from aramid fiber pulpMicroporous Materials, 1997
- A review of the fabrication and properties of carbon fibresMaterials Science and Engineering, 1975