JBJacob Breiholz

Jacob Breiholz

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jacob Breiholz has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Sub-μW Energy-Performance-Aware IoT SoC With a Triple-Mode Power Management Unit for System Performance Scaling, Fast DVFS, and Energy Minimization

    by Xinjian Liu, Sumanth Kamineni, Jacob Breiholz, Benton H. Calhoun, Shuo Li

    This article presents an ultra-low-power (ULP) Internet-of-Things (IoT) system-on-chip (SoC) using a triple-mode power management unit (PMU) to achieve self-adaptive power–performance scaling and energy-minimized operation. The proposed PMU comprises three modes: energy-aware (EA) mode, performance-aware (PA) mode, and minimum energy point (MEP) tracking mode. By controlling a microprocessor with the three modes, the SoC can adaptively scale its frequency and supply voltage based on either the input energy availability or the task priority. To achieve robust and rapid mode transitions, the SoC adopts fast dynamic voltage and frequency scaling (DVFS) and fast load transient response (FLTR) through asynchronous control. For energy-minimized operation, a sub-nW constant-energy-cycle (CEC) algorithm keeps the microprocessor operating at the MEP with a 0.026-mm $^{2}$ area overhead. In addition, the on-chip integration of a bias generator (BG), clock (CLK), and power-on-reset block empowers the SoC to be a fully self-contained system. Fabricated in 65-nm CMOS, measurement results show that the SoC has a minimum power consumption of 194.3 nW at 180 Hz. The proposed PMU achieves 5.2-nW quiescent power and 92.6% peak efficiency while maintaining $>$ 80% efficiency from 190 nW to 3 mW. The MEP tracking (MEPT) circuits achieve $<$ 2.3% energy per cycle error and $<$ 18 mV voltage tracking error. The measured quiescent power of the MEPT circuits in the idle mode is 379 pW, which only accounts for 0.19% of the total system power. Measurements of the triple-mode transitions show that this SoC is well suited for resource-constrained IoT applications.


  • Open Access

    A 1.02 μW Battery-Less, Continuous Sensing and Post-Processing SiP for Wearable Applications

    by Christopher J. Lukas, Farah B. Yahya, Jacob Breiholz, Abhishek Roy, Xing Chen, Harsh N. Patel, NingXi Liu, Avish Kosari, Shuo Li, Divya Akella Kamakshi, et al.

    Improving system lifetime and robustness is a key to advancing self-powered platforms for real world applications. A complete self-powered, battery-less, wearable platform requires a microwatt-power system-on-chip (SoC), operating reliably within this budget, capable of surviving long periods without charging, and recovering from power loss to its previous state. To meet these requirements, we designed a wireless sensing heterogeneous system-in-package (SiP) containing an ultra-low power (ULP) SoC, a non-volatile boot memory (NVM), and a 2.4 GHz frequency shift key (FSK) radio, all integrated with custom ULP interfaces. The SoC includes a fully integrated energy harvesting platform power manager (EH-PPM) to power the SiP and other commercial sensors. The EH-PPM is designed for small loads and powers the SoC and peripherals while drawing very low operating current. The SoC also includes a digital system data-flow for sensing applications, an analog front end for ECG signal acquisition, and a cold-boot management system (CBMS) for boot and recovery from the NVM. The CBMS enables integration of the SoC with the ULP NVM to create a wearable formfactor, self-powered system capable of recovery from power loss. The SoC also includes a radio interface tightly integrated with a compression accelerator to efficiently communicate with the FSK transmitter and reduce the FSK's transmission time. This tight integration between accelerators on the SoC and peripherals is another feature that reduces the system's power consumption by reducing the code size and number of memory accesses required to perform an operation. The SoC consumes 507 nW average power while running free-fall detection, 519 nW average power while measuring ambient temperature, and 1.02 μW during continuous ECG monitoring and post-processing.


  • A 130nm canary SRAM for SRAM dynamic write VMIN tracking across voltage, frequency, and temperature variations

    by Arijit Banerjee, Jacob Breiholz, Benton H. Calhoun

    With device scaling in bulk technologies, process variation increases and SRAM V MIN scaling faces a bottleneck. Using peripheral assist techniques, we can lower the V MIN at the cost of energy and area. However, the SRAM V MIN is highly dependent on voltage, temperature, and operating frequency fluctuations, which are hard to determine in real time. Prior work shows theoretically that canary SRAMs using reverse assist can track SRAM dynamic write V MIN . In this paper, we show the first silicon results of a working 512b canary SRAM using bitline and wordline type reverse assists in a 130nm bulk technology. It has distinct canary failure trends across voltage, frequency, and temperature variations to track an 8Kb SRAM's dynamic write V MIN .