SPSara Pouladi

Sara Pouladi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sara Pouladi has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Crack-free > 1-μm AlN layer on Si substrate using ductile interlayer for strain modification in epitaxial film

    by Muhammad Aqib, Mina Moradnia, Mihee Ji, Vijay S. Parameshwaran, Wendy L. Sarney, Sara Pouladi, Nam-In Kim, Rheno Paul Rajesh Kumar, Gregory A. Garrett, Anand V. Sampath, et al.

    Growing crack-free, epitaxial ultrawide-bandgap semiconductor films on cost-effective, large-area substrates, such as AlN on Si, poses a significant challenge due to substantial lattice and thermal expansion mismatches. We introduce an approach to mitigate tensile strain or reverse strain signs between the substrate and the AlN layer, thereby suppressing crack formation during the heteroepitaxial growth of thick III-N films. This approach introduces ductile metallic interlayers, specifically Au, to change the strain state of AlN from in-plane tensile to compressive, without initiating cracks. Furthermore, the Au interlayer is grown epitaxially as a single crystal, which prevents the transfer of tensile strain into the AlN film, as confirmed by x-ray diffraction and transmission electron microscopy. We demonstrate crack-free AlN films exceeding 1 μm in thickness. These findings hold significant promise for advancing the field of ultrawide-bandgap semiconductor materials, with potential applications in electronic, optoelectronic, sensing, and energy device applications.


  • Open Access

    Strain accumulation and relaxation on crack formation in epitaxial AlN film on Si (111) substrate

    by Muhammad Aqib, Sara Pouladi, Mina Moradnia, Rheno Paul Rajesh Kumar, Nam-In Kim, Jae-Hyun Ryou

    The formation of cracks is often observed in the epitaxial growth of ultrawide-bandgap aluminum nitride (AlN) semiconductor films on economical and versatile silicon (Si) substrates due to the significant differences in in-plane lattice parameters and thermal expansion coefficients between the film and the substrate, which hampers the development of template, buffer layer, and device structure with a relatively thick AlN layer for devices. The present study aims to elucidate the conditions of crack formation through a simple but comprehensive estimation of strain energy accumulation and relaxation by lattice strain, misfit dislocation density, and crack formation. Strain energy in the epitaxial film from lattice and thermal mismatches is evaluated by an elastic strain equation tailored to the epitaxy of the hexagonal crystal structure. The effects of temperature, thickness, and dislocation density on the lattice and dislocation strain energies of the film are also considered. Finally, the comparison in the changes in the total strain energy and cleavage energy with decreasing temperature shows that cleavage energy is higher than strain energy if the film is thinner than 400 nm but becomes lower than the strain energy if the film is thicker than 400 nm during cooldown, suggesting the crack formation, which matches well with experimental observations.


  • Open Access

    High‐efficiency single‐junction p‐i‐n GaAs solar cell on roll‐to‐roll epi‐ready flexible metal foils for low‐cost photovoltaics

    by Devendra Khatiwada, Carlos A. Favela, Sicong Sun, Chuanze Zhang, Sahil Sharma, Monika Rathi, Pavel Dutta, Eduard Galstyan, Alex Belianinov, Anton V. Ievlev, et al.

    We demonstrate the fabrication and characterization of high‐efficiency, single‐junction p‐i‐n GaAs solar cells, on flexible metal foil with epi‐ready buffer via roll‐to‐roll fabrication. Single‐junction p‐i‐n GaAs solar cells were fabricated using metal–organic chemical vapor deposition (MOCVD). An efficiency greater than 13% was obtained at 1 sun, which is the highest reported efficiency on GaAs photovoltaics directly deposited on metal tapes. This exceeds our previously reported study showcasing 11.5% efficiency on single‐junction p‐n solar cell structure. Improved morphology of p‐i‐n structure compared with p‐n is explained by atomic force microscopy (AFM), scanning electron microscopy (SEM), and helium ion microscopy (HIM) measurements. Time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS) analysis showed reduced Zn diffusion in p‐i‐n cell compared with the p‐n cell. We attribute the improvement in efficiency of p‐i‐n cells on flexible metal tapes to the quality of the junction, surface morphology, controlled diffusion of species within the active layers, and increase in absorption due to the optimized intrinsic layer thickness.


  • Flexible GaAs Single-Junction Solar Cells Based on Single-Crystal-Like Thin-Film Materials Directly Grown on Metal Tapes

    by Sara Pouladi, Monika Rathi, Mojtaba Asadirad, Pavel Dutta, Seung Kyu Oh, Devendra Khatiwada, Shahab Shervin, Yao Yao, Venkat Selvamanickam, Jae-Hyun Ryou

    We demonstrate flexible single-junction III-V solar cells based on single-crystal-like GaAs thin films directly grown on a metal tape. The epitaxial (Al)GaAs thin-film structures are developed on flexible polycrystalline Hastelloy tapes using crystallinity-transformational buffer layers for photovoltaic devices with front illumination geometry. The GaAs solar cell shows promising photovoltaic characteristics under AM 1.5G 1-Sun illumination. An open-circuit voltage of 330mV, a short circuit current of 21mA/cm 2 , and a fill factor of 73 result in a conversion efficiency of ~5%. Further improvement in semiconductor thin films quality, device design and fabrication process optimization would improve the device performance characteristics. This new technology has the potential for next-generation low-cost and high efficiency flexible photovoltaic devices.

  • Numerical Simulation for Operation of Flexible Thin-Film Transistors With Bending

    by Mojtaba Asadirad, Sara Pouladi, Shahab Shervin, Seung Kyu Oh, Keon Hwa Lee, Jeomoh Kim, Sung-Nam Lee, Ying Gao, Pavel Dutta, Venkat Selvamanickam, et al.

    We theoretically study the change of the performance characteristics with various mechanical bending conditions for flexible thin-film transistors (TFTs) by two-dimensional device simulation. The characteristics of newly developed flexible TFTs with high crystalline quality and high carrier mobility are more sensitive to the degree of bending. We developed a model to estimate the change in the characteristics as a function of curvature radius of the channel with a focus on scattering of carriers in a bent TFT. Field-effect mobility decreases by bending, e.g., ~11% with a radius at R = 30 mm and a knee voltage increases, while a threshold voltage remains the same. This model can be extended to other flexible TFTs with bending.