Taylor G. Smith
Taylor G. Smith has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Jane P. Chang
Department of Chemical and Biomolecular Engineering, University of California 1 , Los Angeles, California 90095
4 shared publications - Akiteru Ko
TEL Technology Ctr., America, LLC (United States)
1 shared publication - Ali Mesbah
Department of Chemical and Biomolecular Engineering University of California Berkeley Berkeley California USA
1 shared publication - Ali Mohamed Ali
Department of Applied Science for Electronics and Materials, Kyushu University, Fukuoka 816-8580, Japan
1 shared publication - Andreas Fischer
Lam Research Corporation 1 , 4400 Cushing Parkway, Fremont, California 94538
1 shared publication - Chanhoon Park
Samsung Electronics Semiconductor R&D Center 19 , Gyeonggi-Do 18448, South Korea
1 shared publication
Latest Publications
- 10 November 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (46) , 20534-20541
Etch Products of Copper Atomic Layer Etching by Oxidation and Formic Acid Vapor
- 10 November 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (46) , 20534-20541
Etch Products of Copper Atomic Layer Etching by Oxidation and Formic Acid Vapor
- 24 July 2025
- Published by Wiley in ChemCatChem
- Vol. 17 (22)
Depoisoning Catalysts by Atomic Layer Etching
To improve the sustainability of transition metal catalysts, which suffer from deactivation through poisoning when exposed to sulfur‐containing compounds, atomic layer etch (ALE)—a technique studied predominantly by the microelectronics and semiconductor communities—is explored as a method of regenerating metal catalysts. In this work, the CO 2 reduction reaction (CO 2 RR) through electrolysis over a copper (Cu) catalyst is used as a model system to evaluate the efficacy of the ALE process in de‐poisoning the catalyst studied. Copper surfaces that were poisoned with 1‐dodecanethiol showed reduced faradaic efficiencies for CO 2 RR. Treating the poisoned copper surfaces with an oxygen plasma, the first step of a copper ALE process, restored most of the CO 2 RR catalytic performance. Completing a full ALE cycle using both oxygen plasma and formic acid vapor resulted in further improved CO 2 RR faradaic efficiencies, likely due to the increased surface roughness.
- 24 July 2025
- Published by Wiley in ChemCatChem
- Vol. 17 (22)
Depoisoning Catalysts by Atomic Layer Etching
To improve the sustainability of transition metal catalysts, which suffer from deactivation through poisoning when exposed to sulfur‐containing compounds, atomic layer etch (ALE)—a technique studied predominantly by the microelectronics and semiconductor communities—is explored as a method of regenerating metal catalysts. In this work, the CO 2 reduction reaction (CO 2 RR) through electrolysis over a copper (Cu) catalyst is used as a model system to evaluate the efficacy of the ALE process in de‐poisoning the catalyst studied. Copper surfaces that were poisoned with 1‐dodecanethiol showed reduced faradaic efficiencies for CO 2 RR. Treating the poisoned copper surfaces with an oxygen plasma, the first step of a copper ALE process, restored most of the CO 2 RR catalytic performance. Completing a full ALE cycle using both oxygen plasma and formic acid vapor resulted in further improved CO 2 RR faradaic efficiencies, likely due to the increased surface roughness.
- Top Cited PapersOpen Access
- 7 June 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 42 (4)
Future of plasma etching for microelectronics: Challenges and opportunities
Plasma etching is an essential semiconductor manufacturing technology required to enable the current microelectronics industry. Along with lithographic patterning, thin-film formation methods, and others, plasma etching has dynamically evolved to meet the exponentially growing demands of the microelectronics industry that enables modern society. At this time, plasma etching faces a period of unprecedented changes owing to numerous factors, including aggressive transition to three-dimensional (3D) device architectures, process precision approaching atomic-scale critical dimensions, introduction of new materials, fundamental silicon device limits, and parallel evolution of post-CMOS approaches. The vast growth of the microelectronics industry has emphasized its role in addressing major societal challenges, including questions on the sustainability of the associated energy use, semiconductor manufacturing related emissions of greenhouse gases, and others. The goal of this article is to help both define the challenges for plasma etching and point out effective plasma etching technology options that may play essential roles in defining microelectronics manufacturing in the future. The challenges are accompanied by significant new opportunities, including integrating experiments with various computational approaches such as machine learning/artificial intelligence and progress in computational approaches, including the realization of digital twins of physical etch chambers through hybrid/coupled models. These prospects can enable innovative solutions to problems that were not available during the past 50 years of plasma etch development in the microelectronics industry. To elaborate on these perspectives, the present article brings together the views of various experts on the different topics that will shape plasma etching for microelectronics manufacturing of the future.
- 7 June 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 42 (4)
Top Cited PapersOpen AccessFuture of plasma etching for microelectronics: Challenges and opportunities
Plasma etching is an essential semiconductor manufacturing technology required to enable the current microelectronics industry. Along with lithographic patterning, thin-film formation methods, and others, plasma etching has dynamically evolved to meet the exponentially growing demands of the microelectronics industry that enables modern society. At this time, plasma etching faces a period of unprecedented changes owing to numerous factors, including aggressive transition to three-dimensional (3D) device architectures, process precision approaching atomic-scale critical dimensions, introduction of new materials, fundamental silicon device limits, and parallel evolution of post-CMOS approaches. The vast growth of the microelectronics industry has emphasized its role in addressing major societal challenges, including questions on the sustainability of the associated energy use, semiconductor manufacturing related emissions of greenhouse gases, and others. The goal of this article is to help both define the challenges for plasma etching and point out effective plasma etching technology options that may play essential roles in defining microelectronics manufacturing in the future. The challenges are accompanied by significant new opportunities, including integrating experiments with various computational approaches such as machine learning/artificial intelligence and progress in computational approaches, including the realization of digital twins of physical etch chambers through hybrid/coupled models. These prospects can enable innovative solutions to problems that were not available during the past 50 years of plasma etch development in the microelectronics industry. To elaborate on these perspectives, the present article brings together the views of various experts on the different topics that will shape plasma etching for microelectronics manufacturing of the future.
- Open Access
- 31 January 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 42 (2)
Plasma nitridation for atomic layer etching of Ni
Nickel (Ni) and its alloys are important multifunctional materials for the fabrication of integrated circuits, as either the absorber for the extreme ultraviolet lithography masks and/or interconnect metals at the nanometer scale. However, these applications require that Ni to be patterned controllably, selectively, and anisotropically—requirements that can only be met with a plasma based atomic layer etch (ALE) process. In this work, a plasma-thermal ALE approach is developed to pattern Ni, utilizing a nitrogen plasma to form NixN at the surface, formic acid (FA) vapor to selectively remove the NixN layer, and a low-energy Ar+ sputter process to remove carbon residue left by the FA prior to the subsequent nitridation step. This three step ALE process was shown effective to etch Ni with a rate of 1.3 ± 0.17 nm/cycle while maintaining surface smoothness.
- 31 January 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 42 (2)
Open AccessPlasma nitridation for atomic layer etching of Ni
Nickel (Ni) and its alloys are important multifunctional materials for the fabrication of integrated circuits, as either the absorber for the extreme ultraviolet lithography masks and/or interconnect metals at the nanometer scale. However, these applications require that Ni to be patterned controllably, selectively, and anisotropically—requirements that can only be met with a plasma based atomic layer etch (ALE) process. In this work, a plasma-thermal ALE approach is developed to pattern Ni, utilizing a nitrogen plasma to form NixN at the surface, formic acid (FA) vapor to selectively remove the NixN layer, and a low-energy Ar+ sputter process to remove carbon residue left by the FA prior to the subsequent nitridation step. This three step ALE process was shown effective to etch Ni with a rate of 1.3 ± 0.17 nm/cycle while maintaining surface smoothness.