HYHang Yu

Hang Yu

*This is an algorithmically generated author record based on publicly available information.

Hang Yu has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Flow topology transformation for planar shock/cylindrical boundary layer interactions with varying incident shock intensity

    by Fang-Bo Li, Zai-Jie Liu, Yuan Qin, He-Xia Huang, Hui-Jun Tan, Yao-Yu Xu, Hang Yu, Ruo-Fan Du

    Three-dimensional flow topologies and shock structure transformations in planar incident shock/cylindrical boundary layer interactions under varying incident shock intensities are systematically investigated. Based on a combined experimental and numerical approach, quantitative analyses are performed on separation scales, shock refraction characteristics, and wall pressure distributions at deflection angles of 12.5°, 15°, 17.5°, and 20° in Mach 2.0 flow. Results indicate that the shock reflection configuration is primarily governed by incident shock intensity, transitioning from regular reflection to Mach reflection with increasing strength, delineating two distinct regimes: regular reflection-dominant and Mach reflection-dominant flows, characterized by the refraction of compression waves and expansion waves above the separation region. Increasing incident shock strength further leads to enlarged separation bubbles and reduced curvature of the primary separation lines. Notably, wall pressure distributions follow a quasi-two-dimensional elliptical similarity law within the central region, which remains valid under various incident shock intensities, while significant breakdown of this similarity occurs in peripheral regions where low-energy fluid accumulation replaces reversed flow. Dominated by the finite spanwise width of the planar incident shock, highly pronounced three-dimensional effects emerge along the cylindrical surface, featured by lateral low-energy fluid aggregation and increased separation shock angles on both sides. The overall flow topology on the cylinder wall is further characterized by the symmetrical primary separation line with swept-back shape, which essentially depicted the near-wall flow structures and further highlights the intrinsic three-dimensionality of the shock–boundary layer interaction behavior.

  • Control of incident shock wave/boundary layer interaction by concave surface

    by Hong-Chao Xue, Yue Zhang, Liang Chen, Hui-Jun Tan, Hao Zhang, Hang Yu

    The separation induced by incident shock wave/boundary layer interaction (ISWBLI) in supersonic/hypersonic inlets significantly degrades aerodynamic performance. This study proposes a novel passive control method for ISWBLI by using a concave surface. Numerical simulations were employed to elucidate the flowfield under the influence of the concave surface, thereby validating the effectiveness of the control method. The results demonstrate that the concave surface generates beneficial expansion waves and precompression effects, which collectively attenuate the separation region both upstream and downstream of the shock impingement point. Specifically, the results show substantial separation size reduction, with upstream concave surface placement achieving 49.1% suppression and downstream configuration yielding 39% reduction. The near wall airflow exhibits distinct interaction patterns depending on geometric positioning. The effectiveness of control is observed in two distinct regions. The first effective region occurs when the initial position of the concave surface is located upstream of the reattachment point of the separation region, extending until the shock impingement point reaches the leeward expansion side. The second region is characterized by the shock impingement point being situated on the windward expansion side, continuing until the end position of the concave surface is downstream of the separation point. Conversely, shock impingement on the concave compression surface intensifies shock strength and exacerbates separation. A critical finding reveals that maximal mitigation of the adverse pressure gradient occurs when the shock impingement point is displaced a distance d1 from the initiation point of the concave surface, or proximate to the end of the concave surface.


  • Open Access

    On low-frequency unsteadiness of single-incident and dual-incident shock waves/turbulent boundary layer interactions with large-scale separations

    by Xin Li, Zi-Yun Wang, Hui-Jun Tan, Hang Yu, Hao Zhang, Yue Zhang

    Interactions between turbulent boundary layer and single-incident or dual-incident shock waves are commonly observed in supersonic inlets. To provide novel insights into the unsteadiness of these interactions, six incident shock wave/turbulent boundary layer interactions (ISWTBLIs), including both single-ISWTBLIs and dual-ISWTBLIs, are experimentally investigated using dynamic wall-pressure measurements at Mach 2.73 flow conditions. Through spectral analysis and correlation analysis, the unsteadiness characteristics of single-ISWTBLIs and dual-ISWTBLIs are comparatively examined, revealing significant influences of shock-wave strength and shock-wave distance on low-frequency unsteadiness. Specifically, both regions near the separation and reattachment points exhibit distinct low-frequency unsteadiness in single-ISWTBLIs and dual-ISWTBLIs with relatively strong separations. An increase in the deflection angle from 10° to 12° in single-ISWTBLIs extends the streamwise separation length, while causing a dramatic decrease in both characteristic frequency and normalized characteristic frequency (Strouhal number) of low-frequency unsteadiness. However, for dual-ISWTBLIs, as the shock-wave distance increases, there is an initial increase followed by a subsequent decrease in the separation length accompanied by a continuously increasing characteristic frequency, thus indicating a different relationship between separation length and characteristic frequency of unsteadiness in dual-ISWTBLIs in comparison with that observed in single-ISWTBLIs. Moreover, correlation analysis revealed that the pressure signals in the reattachment region are of strong negative correlation with those near the separation-shock foot, and the correlation increases with increasing shock-wave strength in single-ISWTBLIs and decreasing shock-wave distance in dual-ISWTBLIs.