WZWenxi Zhang

Wenxi Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wenxi Zhang has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Removal algorithm for crosstalk in dual-beam point-diffraction interferometry based on a four-beam interference model

    by Bo Li, Yiwei Hao, Wenxi Zhang, Xinxin Kong, Zhou Wu

    We introduce what we believe to be a novel crosstalk-removal algorithm to eliminate phase errors in dual-beam point-diffraction interferometry. The method establishes a generalized four-beam interference error model. By using Fourier-carrier least-squares fitting and an iterative optimization based on micro-perturbation, crosstalk-induced error can be effectively eliminated. To the best of our knowledge, no relevant study on mitigating such four-beam interference errors has been previously reported.

  • Open Access

    An Efficient and High-Accuracy Modeling and Design Method for High-Load, Large-Stroke Piezo-Actuated Compliant Amplification Mechanisms

    by Houwen Fu, Wenxi Zhang, Ziqi Wang, Boying Qiao, Hongke Wang

    Piezoelectric-actuated nanopositioning stages commonly employ flexure amplification mechanisms to enlarge output displacement and are widely used in optical measurement, micro and nano manufacturing, and other precision engineering fields. However, existing methods still have limitations in computational efficiency, hinge modeling accuracy, and displacement prediction under external loading. To address these limitations, this paper proposes a generalized compliant-chain modeling method in which flexure hinges are treated as compliant units connected by rigid elements, improving computational efficiency relative to repeated finite element modeling. A multi-configuration hinge model (MCH model) is established to analyze the effects of hinge configurations and mechanism parameters on key performance indices, thereby improving prediction accuracy and extending the design space. A load-induced displacement loss model (LDL model) is further developed to characterize output displacement loss under external loading and improve the applicability of the method to loaded conditions and integrated systems involving multiple flexure mechanisms. Finite element simulations and experiments are conducted to validate the proposed models. The results show that the prediction errors of the amplification ratio and stiffness are both within 5%, while the designed mechanism achieves a high amplification ratio of 17.55. These results indicate that the proposed method provides competitive prediction accuracy and displacement amplification performance among similar flexure amplification mechanisms. The proposed method provides an effective modeling and design tool for amplification mechanisms requiring large stroke and high load capacity.

  • Open Access

    Compact Heterodyne Pinhole Point-Diffraction Interferometer with High Repeatability and Adjustable Contrast Based on Dual-Cascaded Acousto-Optic Modulators

    by Bo Li, Yiwei Hao, Hanlin Zhu, Xinxin Kong, Zhou Wu, Wenxi Zhang

    Conventional pinhole point-diffraction interferometers (PPDIs) owe their popularity to a simple configuration, but that same configuration limits both the usable measurement aperture and the load the phase shifter can carry. Here, we propose a heterodyne phase-shifting point-diffraction interferometer (HPDI) based on dual-cascaded acousto-optic modulators (AOMs), which removes both limitations while keeping the configuration compact. The dual-cascaded AOM module integrates the functions of frequency shifting, beam splitting, and contrast modulation. By modulating its input RF power, the interference contrast can be flexibly adjusted. Simulation and experimental results verify the feasibility of the proposed HPDI, which achieves a measurement repeatability of 0.045 nm (RMS, with piston, tilt, and defocus removed) and agrees with an absolute shift-rotation calibration to within 3.3 nm (RMS).

  • Open Access

    A Compact Dual-Oblique-Fiber Heterodyne Phase-Shifting Point Diffraction Interferometer

    by Yongjie Wang, Conghui Zhu, Wenxi Zhang

    Point diffraction interferometers (PDIs) utilize a near-ideal spherical wavefront generated by point diffraction as the reference, providing a high-quality measurement benchmark independent of reference surface quality. In this work, a compact dual-oblique-fiber heterodyne phase-shifting point diffraction interferometer (DOF-HPSPDI) is proposed. A dual-oblique-fiber point diffraction wavefront generator (DOF-PDWG) is designed to generate the reference and measurement beams separately. The proposed configuration enables efficient utilization of the divergence of the fiber-generated diffracted wavefront, while the reflective structure at the fiber end faces allows the two beams to propagate along a common path. In addition, the close spacing between the two oblique fibers minimizes system errors. Heterodyne phase-shifting interferometry (HPSI) is employed to retrieve the wavefront phase from the interferograms. Theoretical system errors are analyzed through simulations, and experiments verify the feasibility and stability of the proposed system. This work provides a low-cost, compact, and highly stable point diffraction interferometer, offering a promising device for high-precision optical testing and sub-aperture stitching of large-aperture optical components.

  • Open Access

    Design and measurement error analysis of transmission sphere based on pupil aberration theory

    by Anqi Liu, Yixin Zhang, Sizepeng Zhao, Shuangquan Rong, Yibo Zhang, Shuai Yang, Liang Hu, Zhou Wu, Wenxi Zhang

    高端光学制造对光学部组件的面形和波像差提出了极高要求,菲索干涉仪是光学精密测量领域重要的高精度、高灵敏度计量仪器,标准球面镜头是其实现球面元件面形、光学镜头波像差高精度测量的关键核心器件,在测量范围内尽可能降低其引入的测量误差是极具挑战性的。本文从球面干涉测量误差的产生机理出发,首次建立了光瞳像差与回程误差的理论模型,揭示了镜头设计参数和测量对象对光瞳像差的底层作用机制。设计了一款6inF7.2标准球面镜头,通过仿真分析验证了理论模型的正确性。针对该款镜头进行公差分析和研制组装,通过镜间距主动补偿实现了透射波前离焦项0.03λ,总体波前PV=0.32λ,优于公差预期。开展多条纹回程误差测量实验,验证了光瞳像差与回程误差的相关性。本文提出的设计理论有助于深入理解标准球面镜头像差对球面干涉测量误差的作用机理,为该类镜头制定合理的设计目标和高效的优化策略,并有望为超高精度、非球面等极端测量场景提供专用化解决方案。

  • Open Access

    An Adaptive Hyperfine Spectrum Extraction Algorithm for Optical Sensing Based on SG Filtering and VMD

    by Yupeng Wu, Kai Ma, Ziyan Yun, Yueheng Zhang, Qiming Su, Xinxin Kong, Zhou Wu, Wenxi Zhang

    In optical sensing, signal demodulation often degrades fine spectral data, particularly in spectroscopic measurements affected by Doppler noise, aliasing, and circuit noise. Existing algorithms often fall short in addressing these issues effectively, as they either necessitate complex parameter tuning and extensive expertise or are limited to handling simple spectral signals. To address these challenges, this study proposes an adaptive spectral extraction algorithm combining Variational Mode Decomposition (VMD) and Savitzky-Golay (SG) filtering. The algorithm optimizes parameters through an innovative adaptation strategy. By analyzing key parameters such as SG frame length, order, and VMD mode number, it leverages signal time-domain and frequency spectrum information to adaptively determine the optimal VMD modes and SG order, ensuring effective noise suppression and feature preservation. Validated through simulations and experiments, the method significantly enhances spectral signal quality by restoring absorption peaks and eliminating manual parameter adjustments. This work provides a robust solution for improving measurement accuracy and reliability in optical sensing instrumentation, particularly in applications involving complex spectral analysis.


  • Open Access

    Intensity Noise Suppression in Photonic Detector Systems for Spectroscopic Applications

    by Yupeng Wu, Kai Ma, Zhou Wu, Wenxi Zhang

    Spectral measurement technology has found extensive applications across a diverse range of fields, including chemical analysis, environmental monitoring, precise measurement, and laser frequency stabilization. However, the accuracy of spectral measurement results is often constrained by the power noise and frequency jitter inherent in the light source. In contrast to the traditional differential amplification method for acquiring spectral signals, our study introduces a novel approach. By employing a power correction quotient, we effectively suppress common-mode noise. Additionally, we introduce a novel composite differential method that, in theory, is capable of performing closed-loop processing on spectral signals to stabilize the laser frequency. This innovative method not only constructs a stable laser source but also yields high-quality spectral signals simultaneously. In an experiment involving iodine molecule absorption spectroscopy, the algorithm we propose demonstrated remarkable efficacy in mitigating distortions caused by modulated signals and significantly enhanced the signal-to-noise ratio. This algorithm is versatile and can be applied to the signal processing of any spectral signal sensor that employs dual-path light.


  • Open Access

    Corrigendum: Design of optical fiber delay line with large delay range and low insertion loss

    by Kai Wang, Anqi Liu, Xinxin Kong, Zhou Wu, Rui Zhang, Wenxi Zhang

    Corrigendum: Design of optical fiber delay line with large delay range and low insertion loss* Correspondence: zhangwx@aircas.ac.cnKeywords: fiber delay line, scalar diffraction, fiber coupling, insertion loss, lens groupCorrigendum on: College of Optoelectronic, University of Chinese Academy of Sciences, Beijing, China Incorrect AffiliationIn the published article, there was an error in affiliation(s) [2]. Instead of “[College of Optoelectronic, University of Chinese Academy of Sciences, Beijing, China]”, it should be “[School of Optoelectronics, University of Chinese Academy of Sciences, Beijing, China]”. The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.

  • Aspherical measurement error decoupling technology based on global optimal fitting of full-aperture surface shape features and local measurement errors

    by Weihao Wang, Yongjie Wang, Yahui Wang, Zhou Wu, Wenxi Zhang

    非球面光学元件在芯片制造、遥感探测及航空航天等前沿领域具有重要应用价值,因而对其加工和检测精度的要求不断提高。非球面环形子孔径拼接测量技术是一种高精度、通用性强的有效检测技术,但在大非球面度、大陡度元件检测中显著的面形特征与测量误差的耦合问题制约了其测量精度的提升。本文提出一种基于全口径面形特征与局部测量误差全局优化拟合的非球面测量误差解耦合技术,通过构建包含全口径圆形泽尼克多项式与子孔径环形泽尼克多项式的全局优化模型,实现全口径面形特征与子孔径局部测量误差的同步拟合解算与解耦合并提升测量精度。仿真与实验结果表明,该技术可有效分离面形特征与测量误差,同时可避免传统拼接测量方法中面形参考基准存在误差和子孔径误差累积的问题,在本文的实验中其PVr精度较传统方法可提升近30%。此外,该技术无需依赖子孔径重叠区域,能够减少子孔径数量、提升测量效率。此方法为大非球面度、大陡度光学元件的高精度测量提供了技术解决方案。


  • Noise analysis of dual-channel light intensity signal based on wavelength-tuned laser system

    by Yupeng Wu, Kai Ma, Xinxin Kong, Zhou Wu, Wenxi Zhang

    Wavelength-tunable lasers play a crucial role in fields such as precision interferometry and ultra-stable laser applications. The precision of wavelength tuning and the accuracy of frequency stabilization in lasers are the key indicators of their performance. To improve these performance, closed-loop control with dual-beam paths, such as saturated absorption spectrum spatial stabilization, is commonly utilized. The signal-to-noise ratio (SNR) of the control beam detection significantly affects the control precision. Investigating the parameters that influence this SNR and analyzing their relationships are of great engineering significance for further improving the tuning precision and frequency stabilization accuracy of lasers.To increase the SNR, this work examines intensity noise in wavelength-modulation systems based on the polarizer-phase-delay-polarizer model. A polarization beam splitter (PBS) cannot achieve a zero polarization extinction ratio (PER), thus introducing intensity noise from the interference between p and s polarization light. Additionally, non-ideal stray light, such as back-reflected and scattered light from optical components, further reduces the SNR of the detection signal when it converges on the detector’s active area. This work carries out a detailed analysis of these two types of noise, exploring the effects of factors such as PER, wavelength-modulation range, beam diameter, laser polarization direction, and modulation frequency. Based on the theoretical analysis, it also simulates optical phenomena involving half-wave plates with different tilt angles and rotation angles, as well as dual-frequency Gaussian elliptically polarized light under various modulation parameters.The theoretical analysis indicates that the intensities of p and s polarization light undergo periodic variations as the angle between the half-wave plate’s optical axis and the PBS’s slow-axis direction, as well as the angle between the linear-polarization direction and the half-wave plate’s optical axis, changes. The extreme positions of these intensities move with the PER changing. At certain specific angles, destructive interference leads to extremely low intensities in both transmitted and reflected light. Furthermore, when the detector receives stray light of multiple frequencies, the synthesized phase varies periodically with wavelength tuning. This means that over time (corresponding to tuning the center wavelength to different values), the interference intensity exhibits periodic changes from constructive interference to destructive interference and then to constructive interference. Consequently, abnormal dips and peaks may appear in the optical signal intensity.A 633-B-A81-SA-PZT laser from LD-PD INC with a 10 mW output is used in the experiment. A true zero-order half-wave plate model centered at 633 nm is adopted in the simulation. The laser wavelength is tunable in the range of 633 nm±10 pm, and 10 kHz sine-wave current modulation is used, with a wavelength-current tuning coefficient of 1 pm/mA. After an isolator, a 90∶10 coupler splits the beam into a 9 mW output and a 1 mW experiment beam, which is collimated and adjusted by a polarizer, a true zero-order half-wave plate, and a PBS to set the ratio of p light power to s light power. Two Thorlabs FDS100 detectors capture the beams, with signals collected via a data acquisition card. The PD1 and PD2 signals show significant differences under certain conditions, and the p and s light signals vary periodically with half-wave plate rotating. Adding a polarizer at the laser exit and adjusting its angle can improve signal consistency. After alignment, the SNR increases from 10 dB to 31 dB.In this study, wavelength of a 633 nm semiconductor laser is tuned by using a saturated absorption spectrum ring light path. Under different modulation conditions, inconsistencies in the intensity signals of two beams are observed. Polarization control increases the SNR to 31 dB, confirming the theoretical model. Additionally, time domain analysis of stray light from the wavelength-tuned source shows that reducing the wavelength tuning range and modulation frequency can effectively suppress high frequency noise.