Dante Jones
Research Subjects
Dante Jones has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Michael J. Link
Quantum Sensors Division, National Institute of Standards and Technology, Boulder, CO, USA
6 shared publications - Shannon M. Duff
National Institute of Standards and Technology
6 shared publications - Bradley R. Johnson
University of Virginia
5 shared publications - Johannes Hubmayr
National Institute of Standards and Technology
5 shared publications - Suzanne T. Staggs
Princeton University
5 shared publications - Tammy J. Lucas
National Institute of Standards and Technology, Boulder, CO, USA
5 shared publications
Latest Publications
- 31 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (6) , 1-6
Effects of Temperature and Humidity on AlMn Thin Film Stability
Aluminum doped with small concentrations of manganese (AlMn) is an important material for the fabrication of superconducting transition-edge sensor (TES) bolometers and microcalorimeters. AlMn is a versatile thin film material and has a tunable superconducting critical temperature Tc, which has been demonstrated to be repeatable and uniform across 150 mm wafers. In the last decade, large-format arrays of highly sensitive AlMn TES bolometers have been deployed to numerous cosmological experiments to study the cosmic microwave background (CMB) such as Advanced ACTPol on the Atacama Cosmology Telescope in Chile, the Simons Observatory in Chile, and the SPIDER balloon-borne instrument which has undergone two flights from the South Pole. Next generation CMB projects and future far-infrared space missions will rely on the demonstrated success of AlMn TESs. Understanding the long-term stability of this thin film material is critical to minimize risk for these future projects. We have characterized the effects of temperature and humidity on patterned and unpatterned AlMn thin films as an essential step for predicting performance limits and establishing failure criteria for future experiments utilizing AlMn TES detectors. Our findings show that AlMn exposed to elevated temperature (60°C and 85°C) and humidity (60% and 85% relative humidity) for prolonged time periods exhibits excellent stability, with small or negligible changes measured in superconducting critical temperature and normal resistance. We show that the presence or absence of a passivating dielectric layer does not alter these results. Additionally, we present the effects of re-annealing passivated and unpassivated AlMn TESs, which may aid in achieving a targeted Tc during the fabrication process. The sample preparation, environmental testing, and data collection and analysis are discussed.
- 31 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (6) , 1-6
Effects of Temperature and Humidity on AlMn Thin Film Stability
Aluminum doped with small concentrations of manganese (AlMn) is an important material for the fabrication of superconducting transition-edge sensor (TES) bolometers and microcalorimeters. AlMn is a versatile thin film material and has a tunable superconducting critical temperature Tc, which has been demonstrated to be repeatable and uniform across 150 mm wafers. In the last decade, large-format arrays of highly sensitive AlMn TES bolometers have been deployed to numerous cosmological experiments to study the cosmic microwave background (CMB) such as Advanced ACTPol on the Atacama Cosmology Telescope in Chile, the Simons Observatory in Chile, and the SPIDER balloon-borne instrument which has undergone two flights from the South Pole. Next generation CMB projects and future far-infrared space missions will rely on the demonstrated success of AlMn TESs. Understanding the long-term stability of this thin film material is critical to minimize risk for these future projects. We have characterized the effects of temperature and humidity on patterned and unpatterned AlMn thin films as an essential step for predicting performance limits and establishing failure criteria for future experiments utilizing AlMn TES detectors. Our findings show that AlMn exposed to elevated temperature (60°C and 85°C) and humidity (60% and 85% relative humidity) for prolonged time periods exhibits excellent stability, with small or negligible changes measured in superconducting critical temperature and normal resistance. We show that the presence or absence of a passivating dielectric layer does not alter these results. Additionally, we present the effects of re-annealing passivated and unpassivated AlMn TESs, which may aid in achieving a targeted Tc during the fabrication process. The sample preparation, environmental testing, and data collection and analysis are discussed.
- Open Access
- 4 May 2024
- Published by Springer Nature in Journal of Low Temperature Physics
- Vol. 216 (1-2) , 135-143
The Simons Observatory: Production-Level Fabrication of the Mid- and Ultra-High-Frequency Wafers
The Simons Observatory (SO) is a cosmic microwave background instrumentation suite in the Atacama Desert of Chile. More than 65,000 polarization-sensitive transition-edge sensor (TES) bolometers will be fielded in the frequency range spanning 27 to 280 GHz, with three separate dichroic designs. The mid-frequency 90/150 GHz and ultra-high-frequency 220/280 GHz detector arrays, fabricated at NIST, account for 39 of 49 total detector modules and implement the feedhorn-fed orthomode transducer-coupled TES bolometer architecture. A robust production-level fabrication framework for these detector arrays and the monolithic DC/RF routing wafers has been developed, which includes single device prototyping, process monitoring techniques, in-process metrology, and cryogenic measurements of critical film properties. Application of this framework has resulted in timely delivery of nearly 100 total superconducting focal plane components to SO with $$88\%$$ of detector wafers meeting nominal criteria for integration into a detector module: a channel yield $$>95\%$$ and $$T_{\textrm{c}}$$ in the targeted range.- 4 May 2024
- Published by Springer Nature in Journal of Low Temperature Physics
- Vol. 216 (1-2) , 135-143
Open AccessThe Simons Observatory: Production-Level Fabrication of the Mid- and Ultra-High-Frequency Wafers
The Simons Observatory (SO) is a cosmic microwave background instrumentation suite in the Atacama Desert of Chile. More than 65,000 polarization-sensitive transition-edge sensor (TES) bolometers will be fielded in the frequency range spanning 27 to 280 GHz, with three separate dichroic designs. The mid-frequency 90/150 GHz and ultra-high-frequency 220/280 GHz detector arrays, fabricated at NIST, account for 39 of 49 total detector modules and implement the feedhorn-fed orthomode transducer-coupled TES bolometer architecture. A robust production-level fabrication framework for these detector arrays and the monolithic DC/RF routing wafers has been developed, which includes single device prototyping, process monitoring techniques, in-process metrology, and cryogenic measurements of critical film properties. Application of this framework has resulted in timely delivery of nearly 100 total superconducting focal plane components to SO with $$88\%$$ of detector wafers meeting nominal criteria for integration into a detector module: a channel yield $$>95\%$$ and $$T_{\textrm{c}}$$ in the targeted range. - Open Access
- 26 April 2024
- Published by Springer Nature in Journal of Low Temperature Physics
- Vol. 216 (1-2) , 50-56
Qualification of Microwave SQUID Multiplexer Chips for Simons Observatory
The Simons Observatory is a cosmic microwave background experiment stationed atop Cerro Toco, at an elevation of 5200 ms in Chile’s Atacama Desert. The receivers of the Observatory will contain more than 60,000 transition edge sensor bolometers. In order to read out this large detector count in a scalable manner, we utilize a microwave superconducting quantum interference device (SQUID) multiplexing scheme where each detector is inductively coupled to an rf SQUID, which in turn is inductively coupled to a GHz resonator. More than 2000 SQUIDs and resonators are fabricated on a single 76.2-mm-diameter silicon wafer. To qualify wafers before integration, we cryogenically screen $$\sim$$ 10% of the devices on each wafer by use of a standard set of measurements. From these data, we report parameter value trends in 47 wafers that were fabricated in the past two years. We show good control in key parameters such as frequency placement, internal quality factor, and response to applied flux. We demonstrate a wafer acceptance yield of 86%.- 26 April 2024
- Published by Springer Nature in Journal of Low Temperature Physics
- Vol. 216 (1-2) , 50-56
Open AccessQualification of Microwave SQUID Multiplexer Chips for Simons Observatory
The Simons Observatory is a cosmic microwave background experiment stationed atop Cerro Toco, at an elevation of 5200 ms in Chile’s Atacama Desert. The receivers of the Observatory will contain more than 60,000 transition edge sensor bolometers. In order to read out this large detector count in a scalable manner, we utilize a microwave superconducting quantum interference device (SQUID) multiplexing scheme where each detector is inductively coupled to an rf SQUID, which in turn is inductively coupled to a GHz resonator. More than 2000 SQUIDs and resonators are fabricated on a single 76.2-mm-diameter silicon wafer. To qualify wafers before integration, we cryogenically screen $$\sim$$ 10% of the devices on each wafer by use of a standard set of measurements. From these data, we report parameter value trends in 47 wafers that were fabricated in the past two years. We show good control in key parameters such as frequency placement, internal quality factor, and response to applied flux. We demonstrate a wafer acceptance yield of 86%. - Open Access
The Simons Observatory: Production-level Fabrication of the Mid- and Ultra-High-Frequency Wafers
The Simons Observatory (SO) is a cosmic microwave background instrumentation suite in the Atacama Desert of Chile. More than 65,000 polarization-sensitive transition-edge sensor (TES) bolometers will be fielded in the frequency range spanning 27 to 280 GHz, with three separate dichroic designs. The mid-frequency 90/150 GHz and ultra-high-frequency 220/280 GHz detector arrays, fabricated at NIST, account for 39 of 49 total detector modules and implement the feedhorn-fed orthomode transducer (OMT)-coupled TES bolometer architecture. A robust production-level fabrication framework for these detector arrays and the monolithic DC/RF routing wafers has been developed, which includes single device prototyping, process monitoring techniques, in-process metrology, and cryogenic measurements of critical film properties. Application of this framework has resulted in timely delivery of nearly 100 total superconducting focal plane components to SO with 88% of detector wafers meeting nominal criteria for integration into a detector module: a channel yield > 95% and Tc in the targeted range.
Open AccessThe Simons Observatory: Production-level Fabrication of the Mid- and Ultra-High-Frequency Wafers
The Simons Observatory (SO) is a cosmic microwave background instrumentation suite in the Atacama Desert of Chile. More than 65,000 polarization-sensitive transition-edge sensor (TES) bolometers will be fielded in the frequency range spanning 27 to 280 GHz, with three separate dichroic designs. The mid-frequency 90/150 GHz and ultra-high-frequency 220/280 GHz detector arrays, fabricated at NIST, account for 39 of 49 total detector modules and implement the feedhorn-fed orthomode transducer (OMT)-coupled TES bolometer architecture. A robust production-level fabrication framework for these detector arrays and the monolithic DC/RF routing wafers has been developed, which includes single device prototyping, process monitoring techniques, in-process metrology, and cryogenic measurements of critical film properties. Application of this framework has resulted in timely delivery of nearly 100 total superconducting focal plane components to SO with 88% of detector wafers meeting nominal criteria for integration into a detector module: a channel yield > 95% and Tc in the targeted range.
- 3 February 2024
- Published by Springer Nature in Journal of Low Temperature Physics
- Vol. 214 (3-4) , 247-255
The Simons Observatory: Large-Scale Characterization of 90/150 GHz TES Detector Modules
- 3 February 2024
- Published by Springer Nature in Journal of Low Temperature Physics
- Vol. 214 (3-4) , 247-255
The Simons Observatory: Large-Scale Characterization of 90/150 GHz TES Detector Modules
- Open Access
The Simons Observatory: Large-Scale Characterization of 90/150 GHz TES Detector Modules
The Simons Observatory (SO) is a cosmic microwave background instrumentation suite being deployed in the Atacama Desert in northern Chile. The telescopes within SO use three types of dichroic transition-edge sensor (TES) detector arrays, with the 90 and 150 GHz Mid-Frequency (MF) arrays containing 65% of the approximately 68,000 detectors in the first phase of SO. All of the 26 required MF detector arrays have now been fabricated, packaged into detector modules, and tested in laboratory cryostats. Across all modules, we find an average operable detector yield of 84% and median saturation powers of (2.8, 8.0) pW with interquartile ranges of (1, 2) pW at (90, 150) GHz, respectively, falling within their targeted ranges. We measure TES normal resistances and superconducting transition temperatures on each detector wafer to be uniform within 3%, with overall central values of 7.5 mohm and 165 mK, respectively. Results on time constants, optical efficiency, and noise performance are also presented and are consistent with achieving instrument sensitivity forecasts.
Open AccessThe Simons Observatory: Large-Scale Characterization of 90/150 GHz TES Detector Modules
The Simons Observatory (SO) is a cosmic microwave background instrumentation suite being deployed in the Atacama Desert in northern Chile. The telescopes within SO use three types of dichroic transition-edge sensor (TES) detector arrays, with the 90 and 150 GHz Mid-Frequency (MF) arrays containing 65% of the approximately 68,000 detectors in the first phase of SO. All of the 26 required MF detector arrays have now been fabricated, packaged into detector modules, and tested in laboratory cryostats. Across all modules, we find an average operable detector yield of 84% and median saturation powers of (2.8, 8.0) pW with interquartile ranges of (1, 2) pW at (90, 150) GHz, respectively, falling within their targeted ranges. We measure TES normal resistances and superconducting transition temperatures on each detector wafer to be uniform within 3%, with overall central values of 7.5 mohm and 165 mK, respectively. Results on time constants, optical efficiency, and noise performance are also presented and are consistent with achieving instrument sensitivity forecasts.