XMXavier Mouton

Xavier Mouton

*This is an algorithmically generated author record based on publicly available information.

Xavier Mouton has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Vision based road profile estimation for preview-controlled vehicle suspension systems

    by Mert Büyükköprü, Erdem Uzunsoy, Xavier Mouton

    In this paper, a vision-based road profile estimation method was studied for the control of semi-active and active suspension systems. For the purpose, a monocular camera was used to collect data from the road tests to develop a logic to convert the camera measurements into the road profile data. For the generation of the road profile, alignment of the different sets of camera measurements and their coherence were expressed. Importance of the sensor and process noise removal were shown in recognition of the high frequency content of the road profile, which was a particular interest of the study. Additionally, a density-based clustering algorithm was taken into account to cluster the measured points vertically, to remove the process and sensor noise. The density-based clustering method reduced the noises and allowed detection of the high and low frequency contents of the road.


  • Open Access

    A Unified Framework for Vertical States Estimation: Data-Driven Approach Incorporating Uncertainty

    by Zhegong Shangguan, Younesse El Mrhasli, Gaël P. Atheupe, Xavier Mouton, Bruno Monsuez, Adriana Tapus

    Accurate and real-time knowledge of vertical states plays a critical role in vehicular safety and comfort. It contributes to enhanced cornering performance, detailed modeling of vehicle dynamics, and effective implementation of control strategies for numerous active safety systems, especially semi-active and active suspensions. For this purpose, this study aims to estimate three key dynamical states that are impractical to acquire via direct measurements: tire vertical force, road profile, and unsprung mass velocity. A unified framework tailored to the context of vertical dynamics is proposed, leveraging a state-of-the-art multivariate prediction model known as Neural Basis Expansion Analysis for Time Series (N-BEATS). This model uses existing in-vehicle signals and is trained using data from a simulation platform with a high-fidelity vehicle model. Additionally, the model provides an uncertainty interval of its estimation rather than a single value. Test results reveal that N-BEATS exhibits good tracking performance, outperforming Long Short-Term Memory (LSTM) in terms of estimation errors and inference speed. Finally, we highlight extra functionalities of the developed virtual sensor such as road quality classification and the consistency of the temporal-frequency content between predicted signals and the ground truth labels.


  • Multi-Horizon Virtual Sensor for Controllable Suspensions: A Benchmark of SOTA Deep Forecasting Models

    by Younesse El Mrhasli, Mert Büyükköprü, Imane Taourarti, Xavier Mouton, Bruno Monsuez, Adriana Tapus

    In the pursuit of achieving autonomous driving, ensuring comfortable and efficient handling of the vehicle is of paramount importance. One way to meet these requirements is by utilizing controllable suspensions as an active system. How-ever, designing an effective control strategy requires knowledge of specific dynamical states, such as suspension stroke speed and displacement. The present study proposes a multi-horizon Virtual Sensor (VS) capable of estimating these states in order to address this issue. The VS is intended to replace or enhance limited direct measurement, and it is designed to cope with predictive control systems where future finite-horizon states are necessary. Importantly, the suggested approach is model-free and based on state-of-the-art deep forecasting models. The benchmark of the chosen models was conducted based on real experimental tests and evaluated using multiple metrics. Our study improves previous work in several aspects, including the use of a minimal instrumentation setup, accurate tracking performance over multiple horizons, the ability to explain the predictions, and the provision of confidence intervals for the estimated states.

  • Open Access

    Optimal Coordination of Chassis Systems in Simultaneous Operations

    by Moad Kissai, Bruno Monsuez, Adriana Tapus, Xavier Mouton, Didier Martinez

    Many research projects are focusing on automated vehicles and reinventing the automotive industry. New technologies are introduced, and the pillars of the ground vehicle are revisited and new challenges appeared. This article focuses on the chassis systems and their control strategies. While assistance strategies use to manage specific operations, autonomous vehicles need to handle simultaneous operations. Optimal solutions for systems coordination are discussed in this article. Robust control synthesis and optimization-based control allocation algorithms are adopted. Results show that the more we get closer to fully autonomous driving where an important number of embedded systems are needed, the more optimal coordination strategies are relevant. These strategies should be considered in the upcoming automotive industrial standards.


  • Open Access

    Optimal Yaw Rate Control for Over-Actuated Vehicles

    by Moad Kissai, Bruno Monsuez, Xavier Mouton, Didier Martinez, Adriana Tapus

    As we are heading towards autonomous vehicles, additional driver assistance systems are being added. The vehicle motion is automated step by step to ensure passengers’ safety and comfort, while still preserving vehicle performance. However, simultaneous activations of concurrent systems may conflict, and non-suitable behavior may emerge. Our research work consists in proving that with the right coordination approach, simultaneous operation of different systems improve the vehicle’s performance and avoid the emergence of unwanted conflicts. To prove this, we gathered different control architectures implemented in commercial passenger cars, and we compared them with our control architecture using a unified reference vehicle model. The high-fidelity vehicle model is developed in Simcenter Amesim in a modular and extensible manner. This enables adding systems in a plug-and-play way. Not only different control architectures can be tested on the same vehicle, but also different systems combinations can be evaluated. In this research, the vehicle can steer at the front and at the rear, and each wheel can be braked independently. Each of the actuators concerned can influence the vehicle’s yaw rate leading in some cases in system conflicts. More complex control strategies are then implemented in Matlab/Simulink, and co-simulations are carried between both softwares in order to provide realistic results. It has been shown that optimal control allocation algorithms are more suitable to coordinate systems in an over-actuated vehicle. Moreover, if the optimization objectives are well formalized, performance, safety and comfort can be improved since the vehicle can benefit from the systems’ synergies.


  • Open Access

    Robust Control for Over-Actuated Vehicles

    by Moad Kissai, Bruno Monsuez, Didier Martinez, Xavier Mouton, Adriana Tapus


  • Open Access

    Adaptive Robust Vehicle Motion Control for Future Over-Actuated Vehicles

    by Moad Kissai, Bruno Monsuez, Xavier Mouton, Didier Martinez, Adriana Tapus

    Many challenges still need to be overcome in the context of autonomous vehicles. These vehicles would be over-actuated and are expected to perform coupled maneuvers. In this paper, we first discuss the development of a global coupled vehicle model, and then we outline the control strategy that we believe should be applied in the context of over-actuated vehicles. A gain-scheduled H ∞ controller and an optimization-based Control Allocation algorithms are proposed. High-fidelity co-simulation results show the efficiency of the proposed control logic and the new possibilities that could offer. We expect that both car manufacturers and equipment suppliers would join forces to develop and standardize the proposed control architecture for future passenger cars.