Meicheng Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Meicheng Liu has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Kaixue Ma
Tianjin University
14 shared publications - Yuefeng Hou
Tianjin University
14 shared publications - Liqi Yang
School of Microelectronics Tianjin University Tianjin China
7 shared publications - Shixuan Wang
Tianjin University
7 shared publications - Can You
School of Microelectronics, Tianjin University, Tianjin, CHINA
6 shared publications - Xihui Teng
Tianjin University
6 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 36 (11) , 1773-1776
Single-Port Reflection-Type Amplitude-Phase Modulator With Simultaneously and Independently Tunable Full-Range Amplitude and 360° Phase
This letter proposes a design method for the single-port reflection-type amplitude-phase modulator with simultaneously and independently tunable full-range amplitude and $360^{\boldsymbol {\circ }}$ phase. First, the principle of single-port amplitude-phase tuning is analyzed mathematically. The independent amplitude and phase tuning paths are selected and utilized to reconstruct the impedance distribution on the amplitude-phase plane. Second, based on the reconstruction concept, two topologies of single-port reflection-type amplitude-phase modulators are proposed to control the amplitude path and phase path simultaneously and independently, covering the reconstructed theoretical impedance distribution. The topologies consist of one 3-dB coupler and three tunable devices, exhibiting simplicity and high integration. Then, the enhanced hybrid integrated suspended line (eHISL) technology is employed in this design to reduce the insertion loss and further expand the amplitude tuning range. To verify the design strategy, two proof-of-concept amplitude-phase modulators were fabricated and measured. The first topology achieves a phase shift range of $383^{\boldsymbol {\circ }}$ and an amplitude modulation range of from −1.4 to −33.1 dB at 2.45 GHz. The second topology exhibits a phase shift range of $381^{\boldsymbol {\circ }}$ and an amplitude modulation range of from −2.8 to −19.6 dB at 2.45 GHz.
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 36 (11) , 1773-1776
Single-Port Reflection-Type Amplitude-Phase Modulator With Simultaneously and Independently Tunable Full-Range Amplitude and 360° Phase
This letter proposes a design method for the single-port reflection-type amplitude-phase modulator with simultaneously and independently tunable full-range amplitude and $360^{\boldsymbol {\circ }}$ phase. First, the principle of single-port amplitude-phase tuning is analyzed mathematically. The independent amplitude and phase tuning paths are selected and utilized to reconstruct the impedance distribution on the amplitude-phase plane. Second, based on the reconstruction concept, two topologies of single-port reflection-type amplitude-phase modulators are proposed to control the amplitude path and phase path simultaneously and independently, covering the reconstructed theoretical impedance distribution. The topologies consist of one 3-dB coupler and three tunable devices, exhibiting simplicity and high integration. Then, the enhanced hybrid integrated suspended line (eHISL) technology is employed in this design to reduce the insertion loss and further expand the amplitude tuning range. To verify the design strategy, two proof-of-concept amplitude-phase modulators were fabricated and measured. The first topology achieves a phase shift range of $383^{\boldsymbol {\circ }}$ and an amplitude modulation range of from −1.4 to −33.1 dB at 2.45 GHz. The second topology exhibits a phase shift range of $381^{\boldsymbol {\circ }}$ and an amplitude modulation range of from −2.8 to −19.6 dB at 2.45 GHz.
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (9) , 9042-9047
A High-Gain Easy-Assembly All-Metal Endfire Antenna Based on a Quasi-2-D Aperture
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (9) , 9042-9047
A High-Gain Easy-Assembly All-Metal Endfire Antenna Based on a Quasi-2-D Aperture
- 18 July 2026
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 68 (7)
Multimode Full‐360° Reflection‐Type Phase Shifter for Multimode Multifunction Phased Arrays
This letter proposes a multimode full‐360° reflection‐type phase shifter (RTPS) for multimode multifunction phased arrays in radar systems requiring angular deception, radio detection, and electromagnetic stealth. Compared with traditional phase shifters, the proposed phase shifter enables multiple modes, including reflection, transmission, and absorption, for the mentioned radar application. First, an absorption mode is integrated without increasing structural complexity. The absorption mode of the phase shifter enhances the practicality of multimode multifunction phased arrays. Second, the S matrix of the generalized three‐port coupler is derived for the first time, facilitating rapid quantitative evaluation of the amplitude and phase in reflection and transmission modes. Third, a load analysis is introduced, demonstrating that dual parallel L‐C load overcomes the limitation of the initial capacitance and capacitance tuning ratio. Finally, the multimode RTPS with reflection, transmission, and absorption modes is fabricated and measured at 2.45 GHz. In reflection mode, the phase range is 367.1° with a magnitude of −2.8 ± 1.6 dB. In transmission mode, the phase shift is 364.1° with a magnitude of −2.2 ± 0.6 dB. In absorption mode, the absorption magnitude is lower than −15 dB. It is demonstrated that the proposed multimode RTPS presents an enticing prospect for multimode multifunction phased arrays.
- 18 July 2026
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 68 (7)
Multimode Full‐360° Reflection‐Type Phase Shifter for Multimode Multifunction Phased Arrays
This letter proposes a multimode full‐360° reflection‐type phase shifter (RTPS) for multimode multifunction phased arrays in radar systems requiring angular deception, radio detection, and electromagnetic stealth. Compared with traditional phase shifters, the proposed phase shifter enables multiple modes, including reflection, transmission, and absorption, for the mentioned radar application. First, an absorption mode is integrated without increasing structural complexity. The absorption mode of the phase shifter enhances the practicality of multimode multifunction phased arrays. Second, the S matrix of the generalized three‐port coupler is derived for the first time, facilitating rapid quantitative evaluation of the amplitude and phase in reflection and transmission modes. Third, a load analysis is introduced, demonstrating that dual parallel L‐C load overcomes the limitation of the initial capacitance and capacitance tuning ratio. Finally, the multimode RTPS with reflection, transmission, and absorption modes is fabricated and measured at 2.45 GHz. In reflection mode, the phase range is 367.1° with a magnitude of −2.8 ± 1.6 dB. In transmission mode, the phase shift is 364.1° with a magnitude of −2.2 ± 0.6 dB. In absorption mode, the absorption magnitude is lower than −15 dB. It is demonstrated that the proposed multimode RTPS presents an enticing prospect for multimode multifunction phased arrays.
- 29 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. PP (15361225) , 1-5
A Vertically Polarized Narrow Width High Gain Meander-Line Bidirectional Array Antenna Mounted on Large-Scale Metal Plane
This letter proposes a vertically polarized meander line bidirectional array antenna with narrow width, accurate beam direction, high gain, and a high gain-to-area (G/A) ratio. First, to mitigate beam tilting observed in horizontally polarized antennas mounted on large-scale metal plane, a novel current distribution mode is proposed. This mode enables vertically polarization and a broadside bidirectional pattern without beam deviation. Moreover, the proposed mode inherently achieves a narrow width, facilitating practical deployment. Second, to simultaneously attain high gain and a high G/A ratio, an equivalent dipole array model is employed to guide structural optimization of meander-line antenna. Finally, a prototype is fabricated to validate the proposed design. Measurement results present bidirectional radiation with a narrow width of 0.15λ0, high gain of 10.53 dBi and a high G/A ratio of 13.92. Considering the above advantages, the proposed antenna shows promising potential for long and narrow scenarios.
- 29 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. PP (15361225) , 1-5
A Vertically Polarized Narrow Width High Gain Meander-Line Bidirectional Array Antenna Mounted on Large-Scale Metal Plane
This letter proposes a vertically polarized meander line bidirectional array antenna with narrow width, accurate beam direction, high gain, and a high gain-to-area (G/A) ratio. First, to mitigate beam tilting observed in horizontally polarized antennas mounted on large-scale metal plane, a novel current distribution mode is proposed. This mode enables vertically polarization and a broadside bidirectional pattern without beam deviation. Moreover, the proposed mode inherently achieves a narrow width, facilitating practical deployment. Second, to simultaneously attain high gain and a high G/A ratio, an equivalent dipole array model is employed to guide structural optimization of meander-line antenna. Finally, a prototype is fabricated to validate the proposed design. Measurement results present bidirectional radiation with a narrow width of 0.15λ0, high gain of 10.53 dBi and a high G/A ratio of 13.92. Considering the above advantages, the proposed antenna shows promising potential for long and narrow scenarios.
- 29 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (7) , 7124-7129
A Low-Loss and Highly Integrated Circularly Polarized Modular Phased Array Based on Enhanced-HISL Technology
This communication proposes a low-loss and highly integrated circularly polarized (CP) modular phased array based on enhanced hybrid integrated suspended line (eHISL) technology. Firstly, eHISL technology is proposed and applied to the phased array architecture for the first time. eHISL is a stripline structure with air as dielectric. Due to the low-loss and self-packaging characteristics of the eHISL technology, the feed circuit exhibits low insertion loss, which further improves the radiation efficiency of the array. Secondly, miniaturization techniques and structural multifunction of the metal layers are applied. The antenna is miniaturized by 90° bending, and the phase shifter is miniaturized using a T-shape equivalent transmission line design. Additionally, the metal layer serves multiple functions, acting simultaneously as the radiator, ground plane, and cavity walls. The CP phased array achieves co-planar integration of antennas and feed circuits with no vertical transitions, and consists of only two layers of metal and one layer of printed circuit board (PCB). Thirdly, to make the system expandable, a modular 2×2 CP subarray is designed. The subarray can be flexibly expanded to a scale of 2m×2n CP phased array through external power dividers. Fourthly, an improved iterative optimization algorithm for periodic unequal spacing arrays is proposed. The proposed algorithm achieves significant sidelobe level suppression at wide scanning angles while maintaining stable main lobe gain. Finally, a 4×4 CP phased array consisting of four 2×2 CP subarrays is simulated, fabricated, and measured to evaluate the performance. The proposed array achieves a -10 dB impedance bandwidth of 17.7% and a radiation efficiency of 58.9% at the center frequency of 3 GHz with a size of 2.04λ0×2.04λ0×0.26λ0.
- 29 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (7) , 7124-7129
A Low-Loss and Highly Integrated Circularly Polarized Modular Phased Array Based on Enhanced-HISL Technology
This communication proposes a low-loss and highly integrated circularly polarized (CP) modular phased array based on enhanced hybrid integrated suspended line (eHISL) technology. Firstly, eHISL technology is proposed and applied to the phased array architecture for the first time. eHISL is a stripline structure with air as dielectric. Due to the low-loss and self-packaging characteristics of the eHISL technology, the feed circuit exhibits low insertion loss, which further improves the radiation efficiency of the array. Secondly, miniaturization techniques and structural multifunction of the metal layers are applied. The antenna is miniaturized by 90° bending, and the phase shifter is miniaturized using a T-shape equivalent transmission line design. Additionally, the metal layer serves multiple functions, acting simultaneously as the radiator, ground plane, and cavity walls. The CP phased array achieves co-planar integration of antennas and feed circuits with no vertical transitions, and consists of only two layers of metal and one layer of printed circuit board (PCB). Thirdly, to make the system expandable, a modular 2×2 CP subarray is designed. The subarray can be flexibly expanded to a scale of 2m×2n CP phased array through external power dividers. Fourthly, an improved iterative optimization algorithm for periodic unequal spacing arrays is proposed. The proposed algorithm achieves significant sidelobe level suppression at wide scanning angles while maintaining stable main lobe gain. Finally, a 4×4 CP phased array consisting of four 2×2 CP subarrays is simulated, fabricated, and measured to evaluate the performance. The proposed array achieves a -10 dB impedance bandwidth of 17.7% and a radiation efficiency of 58.9% at the center frequency of 3 GHz with a size of 2.04λ0×2.04λ0×0.26λ0.
- 23 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (6) , 2576-2580
A Novel Subarray-Level Beamforming Method for Compact, High-Gain, and Enhanced Gain-Bandwidth Periodic Leaky-Wave Endfire Antenna
In this letter, a compact high-gain and enhanced gain-bandwidth periodic leaky-wave endfire antenna (PLWEA) is proposed. It features a compact structure, high gain, and ease of assembly. In addition, it exhibits an enhanced gain-bandwidth and a high gain-to-length ratio (G/L ratio). Firstly, a novel subarray-level beamforming method (SLBM) based on a multi-unit alternated structure is proposed for the first time. This approach can reduce the relative dielectric constant of the substrate by suppressing grating lobes of the higher-order harmonic. A low dielectric constant substrate ensures a stable phase constant, thereby improving the 3 dB gain bandwidth. Furthermore, the dual-degree-of-freedom design method (DDFM) is adopted to realize high gain and high G/L ratio which also enhances flexibility by designing the feedline and elements independently. Finally, to verify the proposed approach, a prototype fabricated on a substrate with an ϵr of 2.2 achieved a measured gain of 14.1 dBi, a G/L ratio of 6.0, and a 3 dB gain bandwidth of 13%.
- 23 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (6) , 2576-2580
A Novel Subarray-Level Beamforming Method for Compact, High-Gain, and Enhanced Gain-Bandwidth Periodic Leaky-Wave Endfire Antenna
In this letter, a compact high-gain and enhanced gain-bandwidth periodic leaky-wave endfire antenna (PLWEA) is proposed. It features a compact structure, high gain, and ease of assembly. In addition, it exhibits an enhanced gain-bandwidth and a high gain-to-length ratio (G/L ratio). Firstly, a novel subarray-level beamforming method (SLBM) based on a multi-unit alternated structure is proposed for the first time. This approach can reduce the relative dielectric constant of the substrate by suppressing grating lobes of the higher-order harmonic. A low dielectric constant substrate ensures a stable phase constant, thereby improving the 3 dB gain bandwidth. Furthermore, the dual-degree-of-freedom design method (DDFM) is adopted to realize high gain and high G/L ratio which also enhances flexibility by designing the feedline and elements independently. Finally, to verify the proposed approach, a prototype fabricated on a substrate with an ϵr of 2.2 achieved a measured gain of 14.1 dBi, a G/L ratio of 6.0, and a 3 dB gain bandwidth of 13%.
- 11 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 36 (3) , 375-378
A Geometric Analysis and Design Methodology for Three Types of High-Resolution Reflection-Type Phase Shifters With Distinct Transmission and Reflection Ratio
This letter proposes a novel geometric analysis and design methodology for three types of high-resolution reflection-type phase shifters (RTPSs) with distinct transmission and reflection (T/R) ratio. The design method is proposed to provide the first high-resolution multibit phase shift solution with flexible T/R ratio for the reconfigurable transmit–reflect arrays (TRAs). The RTPS design for an arbitrary T/R ratio is proposed theoretically by mathematical and geometric analysis. First, the RTPSs can be designed for an arbitrary T/R ratio from 0 to $\boldsymbol {\infty }$ with a full $360^{\boldsymbol {\circ }}$ transmission and reflection phase shift range. Then, in this design, an innovative visualized geometric concept of the load vector-modulated method is proposed to facilitate the analysis. Compared with traditional mathematical analysis, it offers a general and more direct method to gauge the transmission and reflection performance of RTPSs. Based on the geometric method, we find that the T/R ratio of the RTPS can be tuned flexibly by adding an extra phase difference between two reflective loads. Finally, to demonstrate the design strategy, three typical proof-of-concept RTPSs with T/R $= \boldsymbol {\infty }$ , 1, and 0 are fabricated and measured, correlating well with the theory. Thus, the proposed design method of the phase shifters is highly suitable for reconfigurable TRAs.
- 11 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 36 (3) , 375-378
A Geometric Analysis and Design Methodology for Three Types of High-Resolution Reflection-Type Phase Shifters With Distinct Transmission and Reflection Ratio
This letter proposes a novel geometric analysis and design methodology for three types of high-resolution reflection-type phase shifters (RTPSs) with distinct transmission and reflection (T/R) ratio. The design method is proposed to provide the first high-resolution multibit phase shift solution with flexible T/R ratio for the reconfigurable transmit–reflect arrays (TRAs). The RTPS design for an arbitrary T/R ratio is proposed theoretically by mathematical and geometric analysis. First, the RTPSs can be designed for an arbitrary T/R ratio from 0 to $\boldsymbol {\infty }$ with a full $360^{\boldsymbol {\circ }}$ transmission and reflection phase shift range. Then, in this design, an innovative visualized geometric concept of the load vector-modulated method is proposed to facilitate the analysis. Compared with traditional mathematical analysis, it offers a general and more direct method to gauge the transmission and reflection performance of RTPSs. Based on the geometric method, we find that the T/R ratio of the RTPS can be tuned flexibly by adding an extra phase difference between two reflective loads. Finally, to demonstrate the design strategy, three typical proof-of-concept RTPSs with T/R $= \boldsymbol {\infty }$ , 1, and 0 are fabricated and measured, correlating well with the theory. Thus, the proposed design method of the phase shifters is highly suitable for reconfigurable TRAs.
- 20 August 2025
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 67 (8)
A 360° High‐Resolution Single‐Port Reflection‐Type Phase Shifter for Reconfigurable Reflectarray Antennas
This letter presents a novel generalized single‐port phase shifter topology utilizing a 360° high‐resolution reflection‐type phase shifter (RTPS), which can be applied for reconfigurable reflectarray antenna (RRA) applications. First, we propose a novel single‐port RTPS topology for the first time. Compared with the traditional dual‐port phase shifter topology, the proposed single‐port phase shifter topology can be applied in RRA elements. Moreover, a detailed theoretical analysis is conducted by establishing an equivalent topology. Second, to improve design and test efficiency, we utilize the two‐step phase extraction method. This method can reduce the required tunable states from 2 2 n to 2 n +1 for an n ‐bit varactor. Additionally, to minimize the phase step, a phase step optimization theory based on load optimization is proposed. Finally, to validate the design concept, a prototype was fabricated using low‐cost PCB technology. By utilizing the two‐step phase extraction method, the required tunable states for a 6‐bit varactor are reduced by 97%. Experimental results show that the proposed 7‐bit single‐port RTPS achieves high resolution and a full 360° phase shift range with an insertion loss of 2.54 ± 1.24 dB at 2.45 GHz. Thus, the proposed single‐port RTPS topology has the potential to be applied in RRA applications.
- 20 August 2025
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 67 (8)
A 360° High‐Resolution Single‐Port Reflection‐Type Phase Shifter for Reconfigurable Reflectarray Antennas
This letter presents a novel generalized single‐port phase shifter topology utilizing a 360° high‐resolution reflection‐type phase shifter (RTPS), which can be applied for reconfigurable reflectarray antenna (RRA) applications. First, we propose a novel single‐port RTPS topology for the first time. Compared with the traditional dual‐port phase shifter topology, the proposed single‐port phase shifter topology can be applied in RRA elements. Moreover, a detailed theoretical analysis is conducted by establishing an equivalent topology. Second, to improve design and test efficiency, we utilize the two‐step phase extraction method. This method can reduce the required tunable states from 2 2 n to 2 n +1 for an n ‐bit varactor. Additionally, to minimize the phase step, a phase step optimization theory based on load optimization is proposed. Finally, to validate the design concept, a prototype was fabricated using low‐cost PCB technology. By utilizing the two‐step phase extraction method, the required tunable states for a 6‐bit varactor are reduced by 97%. Experimental results show that the proposed 7‐bit single‐port RTPS achieves high resolution and a full 360° phase shift range with an insertion loss of 2.54 ± 1.24 dB at 2.45 GHz. Thus, the proposed single‐port RTPS topology has the potential to be applied in RRA applications.
- 4 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (10) , 3529-3533
A Compact High-Gain Periodic Leaky-Wave Endfire Antenna Based on Dual-Degree-of-Freedom Design Method
In this letter, a compact high-gain periodic leaky = wave endfire antenna is proposed. It has the advantages of compact structure, high gain, and high gain-to-length ratio by satisfying the Hansen-Woodyard (H–W) condition. To meet the H-W condition, a dual-degree-of-freedom design method (DDFM) is proposed, which enhances flexibility by designing the feedline and elements independently. By this means, a π phase loading structure can be easily designed to meet the phase demand of the H-W condition. Furthermore, based on the DDFM, the elements can couple energy from two paths simultaneously, achieving a uniform radiation aperture within a compact structure, which realizes the aperture distribution demand of the H-W condition. Finally, to validate the proposed methods, the antenna is fabricated and measured, achieving a high gain of 14.1 dBi, and a high gain-to-length ratio of 5.4 with a compact size of 5.10λ0×0.30λ0×0.02λ0.
- 4 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (10) , 3529-3533
A Compact High-Gain Periodic Leaky-Wave Endfire Antenna Based on Dual-Degree-of-Freedom Design Method
In this letter, a compact high-gain periodic leaky = wave endfire antenna is proposed. It has the advantages of compact structure, high gain, and high gain-to-length ratio by satisfying the Hansen-Woodyard (H–W) condition. To meet the H-W condition, a dual-degree-of-freedom design method (DDFM) is proposed, which enhances flexibility by designing the feedline and elements independently. By this means, a π phase loading structure can be easily designed to meet the phase demand of the H-W condition. Furthermore, based on the DDFM, the elements can couple energy from two paths simultaneously, achieving a uniform radiation aperture within a compact structure, which realizes the aperture distribution demand of the H-W condition. Finally, to validate the proposed methods, the antenna is fabricated and measured, achieving a high gain of 14.1 dBi, and a high gain-to-length ratio of 5.4 with a compact size of 5.10λ0×0.30λ0×0.02λ0.
- 17 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (9) , 1328-1331
Multifunction Reconfigurable Phase Shifter With Independent 360° Transmission and Reflection Phase Tuning for Multibit Reconfigurable Intelligent Surface
This letter reports a 7-bit 360° multifunction reconfigurable phase shifter (RPS) with independently tuned transmission and reflection modes. The proposed RPS is a promising candidate for multibit reconfigurable intelligent surfaces (RISs) with high gain and full-space coverage. First, the novel topology and design method of the multifunction RPS are proposed in this letter for the first time. The proposed RPS can provide time-division independent 360° transmission and reflection phase tuning with a single shared reflection-type phase shifter topology. Second, in the transmission mode, a two-step phase extraction method is adopted, obtaining a 360° phase shift with low phase steps and a simplified process. The traversal states are reduced by (1– $2^{1 - n}$ ) $\times 100$ % for an n-bit varactor. Third, in the reflection mode, the equivalent topology in the reflection mode is enhanced to enable a 360° phase shift with moderate phase steps as well. Finally, our proof-of-concept RPS design is implemented in PCB technology. The proposed RPS exhibits a phase range of 369° with an insertion loss of $2.26~\pm ~0.74$ dB in transmission mode, and a phase range of 365° with an insertion loss of $3.07~\pm ~1.53$ dB in reflection mode at 2.45 GHz.
- 17 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (9) , 1328-1331
Multifunction Reconfigurable Phase Shifter With Independent 360° Transmission and Reflection Phase Tuning for Multibit Reconfigurable Intelligent Surface
This letter reports a 7-bit 360° multifunction reconfigurable phase shifter (RPS) with independently tuned transmission and reflection modes. The proposed RPS is a promising candidate for multibit reconfigurable intelligent surfaces (RISs) with high gain and full-space coverage. First, the novel topology and design method of the multifunction RPS are proposed in this letter for the first time. The proposed RPS can provide time-division independent 360° transmission and reflection phase tuning with a single shared reflection-type phase shifter topology. Second, in the transmission mode, a two-step phase extraction method is adopted, obtaining a 360° phase shift with low phase steps and a simplified process. The traversal states are reduced by (1– $2^{1 - n}$ ) $\times 100$ % for an n-bit varactor. Third, in the reflection mode, the equivalent topology in the reflection mode is enhanced to enable a 360° phase shift with moderate phase steps as well. Finally, our proof-of-concept RPS design is implemented in PCB technology. The proposed RPS exhibits a phase range of 369° with an insertion loss of $2.26~\pm ~0.74$ dB in transmission mode, and a phase range of 365° with an insertion loss of $3.07~\pm ~1.53$ dB in reflection mode at 2.45 GHz.