Anik Md Shahjahan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Anik Md Shahjahan has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Prodhan Md Safiq Raihan
Hohai University, China
3 shared publications - Mahmudul Hasan
College of Civil Engineering, Taiyuan University of Technology, China
2 shared publications - Toki Thamid Zim
Hohai University, China
2 shared publications - Abdul Ali Khan
Hohai University, China
1 shared publication - Ahamed Zubaer
Shandong University of Technology, China
1 shared publication - Asraful Islam
Department: College of Computer Science and Technology, Nanjing University of Aeronautics and Astronautics, China
1 shared publication
Latest Publications
- Open Access
- 1 September 2024
- Published by AMO Publisher in European Journal of Theoretical and Applied Sciences
- Vol. 2 (5) , 593-619
Design of a Six-Story Teaching Building: A Comprehensive Approach to Safety and Structural Efficiency
This paper describes teaching building design. The project, designed for the teaching building, prioritizes safety in its main structure, a reinforced concrete frame with six floors above ground. The story heights are 4.2m, 3.9m, 3.9m, 3.9m, 3.9m and 3.9m, respectively, and the building's total height is 27.6m. The construction site category is classified as type II, and the first group's seismic fortification intensity is 7 degrees. The process includes architectural design, structural design, and PKPM checking calculation. Architectural design mainly consists of a general description. The plan, elevation, section, and draft of the corresponding building are drawn according to the relevant information and requirements provided by the design task book. Structural design mainly includes load statistics, calculation of internal force and displacement of the frame, a combination of internal force, and calculation of staircase, slab roof, floor slab and frame structure. The calculation of displacement, internal force, and reinforcement of the whole frame structure is carried. Out using PKPM. In the course of architectural design, safety is a paramount consideration, in line with the principles of safety, applicability, beauty, economy, and energy-saving requirements, referring to national standards and relevant materials, and strictly following the requirements of relevant architectural design standards, the design of each link is not only a comprehensive scientific consideration of its own but also a related discussion with teachers, as detailed in the construction plan. The frame structure is adopted,in this structural type. It mainly includes structure layout and calculation sketch determination, load calculation, internal force calculation, internal force combination, main beam section design, and reinforcement calculation, frame column section design and reinforcement calculation, secondary beam section design and reinforcement calculation, floor and roof design, staircase design etc. Among them, the D-value method is used to calculate the internal force of the structure under horizontal load, and the distribution method is used to calculate the internal force of the structure under vertical load (dead load and live load).
- 1 September 2024
- Published by AMO Publisher in European Journal of Theoretical and Applied Sciences
- Vol. 2 (5) , 593-619
Open AccessDesign of a Six-Story Teaching Building: A Comprehensive Approach to Safety and Structural Efficiency
This paper describes teaching building design. The project, designed for the teaching building, prioritizes safety in its main structure, a reinforced concrete frame with six floors above ground. The story heights are 4.2m, 3.9m, 3.9m, 3.9m, 3.9m and 3.9m, respectively, and the building's total height is 27.6m. The construction site category is classified as type II, and the first group's seismic fortification intensity is 7 degrees. The process includes architectural design, structural design, and PKPM checking calculation. Architectural design mainly consists of a general description. The plan, elevation, section, and draft of the corresponding building are drawn according to the relevant information and requirements provided by the design task book. Structural design mainly includes load statistics, calculation of internal force and displacement of the frame, a combination of internal force, and calculation of staircase, slab roof, floor slab and frame structure. The calculation of displacement, internal force, and reinforcement of the whole frame structure is carried. Out using PKPM. In the course of architectural design, safety is a paramount consideration, in line with the principles of safety, applicability, beauty, economy, and energy-saving requirements, referring to national standards and relevant materials, and strictly following the requirements of relevant architectural design standards, the design of each link is not only a comprehensive scientific consideration of its own but also a related discussion with teachers, as detailed in the construction plan. The frame structure is adopted,in this structural type. It mainly includes structure layout and calculation sketch determination, load calculation, internal force calculation, internal force combination, main beam section design, and reinforcement calculation, frame column section design and reinforcement calculation, secondary beam section design and reinforcement calculation, floor and roof design, staircase design etc. Among them, the D-value method is used to calculate the internal force of the structure under horizontal load, and the distribution method is used to calculate the internal force of the structure under vertical load (dead load and live load).
- Open Access
- 1 July 2024
- Published by AMO Publisher in European Journal of Theoretical and Applied Sciences
- Vol. 2 (4) , 623-637
Research on the Performance and Application of a Low-Carbon Waste-Recycling Cement
This paper mainly introduces the history of the formation and development of an ultra-high performance low-carbon waste-utilizing cement (fast-setting and fast-hardening high-belite sulphoaluminate cement). This cement not only uses a large amount of solid waste (fly ash, blast furnace slag, industrial waste gypsum, alkali slag, etc.) as raw materials, and the waste utilization can reach 40%~95%, but also has a calcination temperature of 150~200℃ and 50 ℃ lower than that of traditional ordinary Portland cement and sulphoaluminate cement, and the carbon emission is equivalent to 30%~60% and 50%~80%. Through the elaboration of its main mineral composition, chemical composition, physical properties and action mechanism, the reasons for its excellent properties such as good whiteness, fast setting and hardening, high late strength, and small dimensional deformation are analyzed. And the application research is focused on the fields of inorganic flooring, airports, road quick repair, prefabricated walls, ultra-light and efficient A-level fire insulation, cement crafts, inorganic artificial stone, and UHPC ultra-high performance concrete. At present, there are many types of low-carbon cement in the world, including Porsol cement, Alinit cement, Celitement cement, Japanese eco-cement, multi-component high-mixture cement, high-belite cement, Anther cement, BCT cement, etc., but most of the products have a slow coagulation and hardening speed, and cannot meet the needs of rapid demolding, turnover, and traffic opening for mortar, concrete, cement products or pavements; at the same time, the production process is complicated and cumbersome, the later strength is low, the deformation is large, and the durability is poor. Therefore, in the actual promotion process in the engineering field, there are great difficulties and many constraints. Among them, Aether cement and BCT cement belong to the belite-sulfoaluminate cement system. Aether cement has 6h early strength performance. Compared with Portland cement (burning temperature1400~1500℃), it can significantly reduce production energy consumption, reduce CO2 emissions by 25%~30% per ton of cement, and the 28-day compressive strength reaches the strength level of standard cement (CEMⅠ52.5R); the size shrinkage of this concrete is less than 50% of that of OPC concrete, but its raw materials still use limestone, bauxite, gypsum, iron raw materials and marl raw materials, without effective utilization of bulk industrial waste, and CO2 emissions are far from meeting the low-carbon environmental protection requirements. BCT cement can be produced at a lower temperature (1250~1300℃), and its raw materials use industrial waste residues such as limestone, marl, fly ash and industrial by-product gypsum. CO2 emissions are 30% lower than traditional OPC cement clinker, but there is no early hourly strength, and the strength after 1~2 days is higher than that of ordinary Portland cement. This is far from the goal of using bulk industrial waste as raw materials to produce green, low-carbon, energy-saving and high-performance cement materials, which is currently widely used at home and abroad. At the same time, the above-mentioned low-carbon cement cannot effectively and reasonably control key indicators such as cement whiteness value, early strength before 4 hours, and dimensional change rate, and cannot meet the requirements of high-performance cement. At the same time, the production process is not mature and stable enough, and there is still a long way to go to meet the comprehensive popularization of production industrialization and promotion scale.
- 1 July 2024
- Published by AMO Publisher in European Journal of Theoretical and Applied Sciences
- Vol. 2 (4) , 623-637
Open AccessResearch on the Performance and Application of a Low-Carbon Waste-Recycling Cement
This paper mainly introduces the history of the formation and development of an ultra-high performance low-carbon waste-utilizing cement (fast-setting and fast-hardening high-belite sulphoaluminate cement). This cement not only uses a large amount of solid waste (fly ash, blast furnace slag, industrial waste gypsum, alkali slag, etc.) as raw materials, and the waste utilization can reach 40%~95%, but also has a calcination temperature of 150~200℃ and 50 ℃ lower than that of traditional ordinary Portland cement and sulphoaluminate cement, and the carbon emission is equivalent to 30%~60% and 50%~80%. Through the elaboration of its main mineral composition, chemical composition, physical properties and action mechanism, the reasons for its excellent properties such as good whiteness, fast setting and hardening, high late strength, and small dimensional deformation are analyzed. And the application research is focused on the fields of inorganic flooring, airports, road quick repair, prefabricated walls, ultra-light and efficient A-level fire insulation, cement crafts, inorganic artificial stone, and UHPC ultra-high performance concrete. At present, there are many types of low-carbon cement in the world, including Porsol cement, Alinit cement, Celitement cement, Japanese eco-cement, multi-component high-mixture cement, high-belite cement, Anther cement, BCT cement, etc., but most of the products have a slow coagulation and hardening speed, and cannot meet the needs of rapid demolding, turnover, and traffic opening for mortar, concrete, cement products or pavements; at the same time, the production process is complicated and cumbersome, the later strength is low, the deformation is large, and the durability is poor. Therefore, in the actual promotion process in the engineering field, there are great difficulties and many constraints. Among them, Aether cement and BCT cement belong to the belite-sulfoaluminate cement system. Aether cement has 6h early strength performance. Compared with Portland cement (burning temperature1400~1500℃), it can significantly reduce production energy consumption, reduce CO2 emissions by 25%~30% per ton of cement, and the 28-day compressive strength reaches the strength level of standard cement (CEMⅠ52.5R); the size shrinkage of this concrete is less than 50% of that of OPC concrete, but its raw materials still use limestone, bauxite, gypsum, iron raw materials and marl raw materials, without effective utilization of bulk industrial waste, and CO2 emissions are far from meeting the low-carbon environmental protection requirements. BCT cement can be produced at a lower temperature (1250~1300℃), and its raw materials use industrial waste residues such as limestone, marl, fly ash and industrial by-product gypsum. CO2 emissions are 30% lower than traditional OPC cement clinker, but there is no early hourly strength, and the strength after 1~2 days is higher than that of ordinary Portland cement. This is far from the goal of using bulk industrial waste as raw materials to produce green, low-carbon, energy-saving and high-performance cement materials, which is currently widely used at home and abroad. At the same time, the above-mentioned low-carbon cement cannot effectively and reasonably control key indicators such as cement whiteness value, early strength before 4 hours, and dimensional change rate, and cannot meet the requirements of high-performance cement. At the same time, the production process is not mature and stable enough, and there is still a long way to go to meet the comprehensive popularization of production industrialization and promotion scale.
- Open Access
- 1 July 2024
- Published by AMO Publisher in European Journal of Theoretical and Applied Sciences
- Vol. 2 (4) , 277-314
Pavement Crack Detection and Solution with Artificial Intelligence
Detecting and repairing pavement cracks is essential to ensure road safety and longevity. Traditional inspection and maintenance methods are time-consuming, expensive and often inaccurate. In recent years, there has been a growing trend to use artificial intelligence (AI) to automate the process of pavement crack detection and repair. The article focuses on using AI techniques to detect pavement cracks and provide solutions to repair them. The proposed solution is based on using deep learning algorithms to analyze high-resolution images of the road surface. Photos are taken with a vehicle camera or a drone. The deep learning algorithm is trained using a large data set of tagged sidewalk crack images. Once trained, the algorithm can accurately detect and classify the type of cracks on the pavement surface, including longitudinal, transverse, block and crocodile cracks. The algorithm can also determine the severity of each crack and help prioritize repairs. When cracks are detected, the AI system can make recommendations for repair solutions. This includes identifying the appropriate caulk or filler material to use depending on the type and severity of the crack. The AI system can also recommend the most efficient and cost-effective repair method, such as B. Crack sealing, crack filling or deep repair. Overall, using AI to detect and repair cracks in sidewalks offers a more accurate, efficient, and cost-effective solution to keep roads safe and sustainable. By automating the inspection and repair process, this technology can help prevent accidents, reduce maintenance costs, and improve overall road safety.
- 1 July 2024
- Published by AMO Publisher in European Journal of Theoretical and Applied Sciences
- Vol. 2 (4) , 277-314
Open AccessPavement Crack Detection and Solution with Artificial Intelligence
Detecting and repairing pavement cracks is essential to ensure road safety and longevity. Traditional inspection and maintenance methods are time-consuming, expensive and often inaccurate. In recent years, there has been a growing trend to use artificial intelligence (AI) to automate the process of pavement crack detection and repair. The article focuses on using AI techniques to detect pavement cracks and provide solutions to repair them. The proposed solution is based on using deep learning algorithms to analyze high-resolution images of the road surface. Photos are taken with a vehicle camera or a drone. The deep learning algorithm is trained using a large data set of tagged sidewalk crack images. Once trained, the algorithm can accurately detect and classify the type of cracks on the pavement surface, including longitudinal, transverse, block and crocodile cracks. The algorithm can also determine the severity of each crack and help prioritize repairs. When cracks are detected, the AI system can make recommendations for repair solutions. This includes identifying the appropriate caulk or filler material to use depending on the type and severity of the crack. The AI system can also recommend the most efficient and cost-effective repair method, such as B. Crack sealing, crack filling or deep repair. Overall, using AI to detect and repair cracks in sidewalks offers a more accurate, efficient, and cost-effective solution to keep roads safe and sustainable. By automating the inspection and repair process, this technology can help prevent accidents, reduce maintenance costs, and improve overall road safety.
- Open Access
- 1 May 2024
- Published by AMO Publisher in European Journal of Theoretical and Applied Sciences
- Vol. 2 (3) , 900-912
A Comparative Analysis of Programming Language Preferences Among Computer Science and Non-Computer Science Students
In the face of the growing importance of programming skills across various fields, understanding student preferences for programming languages becomes crucial. This study delves into this very topic, examining which languages resonate most with computer science majors and students from non-computer science backgrounds. We don’t just identify the popular choices; we also explore the underlying reasons behind these preferences through surveys. The analysis reveals a fascinating interplay between factors like a student’s learning experience, their career aspirations, and even their interests, all of which influence their preference for specific programming languages. This newfound knowledge empowers us to refine programming education for a diverse student body, ensuring they’re well-equipped for the demands of the digital world. Our findings hold value for curriculum designers, educators, and industry professionals alike. By understanding the evolving demands and preferences of students, these stakeholders can craft more relevant and engaging programming education experiences. Ultimately, this fosters interdisciplinary collaboration in the digital age, a key element for success in today’s interconnected world. This research not only contributes to the growing body of knowledge on programming language preferences but also offers practical insights for the betterment of programming instruction and the promotion of collaboration across disciplines within the digital landscape.
- 1 May 2024
- Published by AMO Publisher in European Journal of Theoretical and Applied Sciences
- Vol. 2 (3) , 900-912
Open AccessA Comparative Analysis of Programming Language Preferences Among Computer Science and Non-Computer Science Students
In the face of the growing importance of programming skills across various fields, understanding student preferences for programming languages becomes crucial. This study delves into this very topic, examining which languages resonate most with computer science majors and students from non-computer science backgrounds. We don’t just identify the popular choices; we also explore the underlying reasons behind these preferences through surveys. The analysis reveals a fascinating interplay between factors like a student’s learning experience, their career aspirations, and even their interests, all of which influence their preference for specific programming languages. This newfound knowledge empowers us to refine programming education for a diverse student body, ensuring they’re well-equipped for the demands of the digital world. Our findings hold value for curriculum designers, educators, and industry professionals alike. By understanding the evolving demands and preferences of students, these stakeholders can craft more relevant and engaging programming education experiences. Ultimately, this fosters interdisciplinary collaboration in the digital age, a key element for success in today’s interconnected world. This research not only contributes to the growing body of knowledge on programming language preferences but also offers practical insights for the betterment of programming instruction and the promotion of collaboration across disciplines within the digital landscape.
- Open Access
- 1 January 2024
- Published by AMO Publisher in European Journal of Theoretical and Applied Sciences
- Vol. 2 (1) , 313-337
The Physical and Mechanical Properties of Coral Sand
Coral sand interacts with a variety of particles and species in tropical marine habitats due to its special characteristics. particular emphasizes the benefits of using contemporary mathematical technologies to examine the characteristics and behavior of coral sand for engineering applications. Coral sand's composition and creation processes influence its distinctive qualities. Coral sand is mostly made up of the skeletal remains of tiny coral polyps and has a white or off-white appearance due to its high calcium carbonate content. Particularly in the area of geotechnical engineering, the interaction of coral sand particles is of great importance. Particle form, size distribution, and interparticle forces are a few examples of the variables that affect how coral sand behaves as a granular material. Investigations on its geotechnical characteristics, such as its shear strength, permeability, and compressibility, are the main focus of current research. To learn more about the engineering behavior of coral sand, researchers are examining field monitoring approaches and laboratory testing procedures. Additionally, research aims to comprehend how biological activity, cementation, and particle form affect coral sand's mechanical characteristics. In the coral sand study, the benefit of contemporary computation technologies is remarkable. Advanced computer methods, in combination with numerical modeling and simulation approaches, provide precise forecasting of coral sand behavior under various loading and climatic conditions. Engineers may use these technologies to examine foundation design issues, determine the stability of coastal buildings, and create methods for controlling coastal erosion. The study of coral sand and its characteristics has important ramifications for geotechnical engineering. The capacity to assess and construct engineering structures in coral sand settings is improved by the application of contemporary computation technologies.
- 1 January 2024
- Published by AMO Publisher in European Journal of Theoretical and Applied Sciences
- Vol. 2 (1) , 313-337
Open AccessThe Physical and Mechanical Properties of Coral Sand
Coral sand interacts with a variety of particles and species in tropical marine habitats due to its special characteristics. particular emphasizes the benefits of using contemporary mathematical technologies to examine the characteristics and behavior of coral sand for engineering applications. Coral sand's composition and creation processes influence its distinctive qualities. Coral sand is mostly made up of the skeletal remains of tiny coral polyps and has a white or off-white appearance due to its high calcium carbonate content. Particularly in the area of geotechnical engineering, the interaction of coral sand particles is of great importance. Particle form, size distribution, and interparticle forces are a few examples of the variables that affect how coral sand behaves as a granular material. Investigations on its geotechnical characteristics, such as its shear strength, permeability, and compressibility, are the main focus of current research. To learn more about the engineering behavior of coral sand, researchers are examining field monitoring approaches and laboratory testing procedures. Additionally, research aims to comprehend how biological activity, cementation, and particle form affect coral sand's mechanical characteristics. In the coral sand study, the benefit of contemporary computation technologies is remarkable. Advanced computer methods, in combination with numerical modeling and simulation approaches, provide precise forecasting of coral sand behavior under various loading and climatic conditions. Engineers may use these technologies to examine foundation design issues, determine the stability of coastal buildings, and create methods for controlling coastal erosion. The study of coral sand and its characteristics has important ramifications for geotechnical engineering. The capacity to assess and construct engineering structures in coral sand settings is improved by the application of contemporary computation technologies.