WJWuxing Jing

Wuxing Jing

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wuxing Jing has a total of 41 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Dynamic Analysis and Slider Vibration Control of a Moving-Mass High-Speed Cruise Vehicle

    by Peng Sui, Yudong Hu, Changsheng Gao, Wuxing Jing, Jie Sun

    In complex environments, centroid and focus slip in high-speed cruise vehicles can degrade maneuverability and stability, necessitating the urgent adoption of relaxed static stability techniques to address this. However, the classical fuel transfer method has slow response limitations when regulating the static stability of high-speed cruise vehicles with fast time-varying characteristics. To overcome this limitation and expand the performance envelope, a moving-mass control scheme is introduced, and a moving-mass high-speed cruise vehicle is presented. Firstly, a seven-degree-of-freedom model of the vehicle is established using the Newton-Euler method, and the manipulation mechanism of moving-mass control is revealed. Secondly, considering the coupling effect of the moving-mass mechanism, the benefits and influences of moving-mass control on the trimmed lift-drag ratio and normal available overload are quantitatively analyzed. The variation law of the coupling characteristics is clarified through parameter sensitivity analyses. Finally, for the vibration control problem after the slider moves to the desired position, a fractional-order PD controller is designed based on the analytical solution and fixed-point theory. The approximate analytical solution for the multi-dimensional coupled system composed of the slider and the pitch attitude is obtained using the averaging method. Drawing on the analytical solution, the auxiliary design conditions for the static stability margin in this vehicle's aerodynamic layout and the optimal design formula for the controller parameters are derived. Comparisons under harmonic, impact, square wave, and random excitations show that the optimized fractional-order PD has outstanding advantages in terms of broadband vibration reduction and output force, among other aspects.


  • Design, Modeling and Attitude Control of a Novel Moving-Mass Control Coaxial Dual-Rotor UAV

    by Qingfeng Du, Qingzhan Meng, Yudong Hu, Wuxing Jing, Changsheng Gao, Xiaomeng Dong, Qingqing Lin

  • Trajectory Prediction Algorithm of Missile Based on Physics-Augmented Deep Learning

    by Hongyan Zang, Yudong Hu, Changsheng Gao, Wuxing Jing

    Recently, high-precision trajectory prediction of ballistic missile in the boost phase has become a research hotspot in missile defense system. This paper proposes a trajectory prediction algorithm based on physics-augmented deep learning (PADL) to solve this problem. Firstly, the motion model of the boost phase is given. Then, the physics-augmented deep learning trajectory prediction model is derived to accurately describe the complex dynamic characteristics of the boost phase. The model combines the advantages of physical model and deep learning model, which enhances the model interpretability and reduces the model uncertainty. On this basis, this paper designs an SECG deep learning network to deeply mine the time series features in the target state data and predict the turning coefficient. The SECG network combines the convolutional neural network (CNN) and the gated recurrent unit neural network (GRU), and introduces the squeeze-and-excitation networks (SENet). Finally, simulation verification is carried out under various conditions. The results show that the PADL trajectory prediction algorithm has high precision, good stability and strong robustness, which can realize high-precision trajectory prediction of ballistic missile in the boost phase.


  • A Robust Adaptive Filtering Algorithm for High-Maneuvering Hypersonic Vehicles

    by Xinru Liang, Changsheng Gao, Wuxing Jing, Ruoming An

    This paper concentrates on addressing the hypersonic glide vehicle (HGV) tracking problem considering the high maneuverability and non-stationary heavy-tailed measurement noise without prior statistics in complicated flight environments. Since the interacting multiple model (IMM) filtering is famous with its ability to cover the movement property of motion models, the problem is formulated as modeling the non-stationary heavy-tailed measurement noise without any prior statistics in the IMM framework. Firstly, without any prior statistics, the Gaussian-inverse Wishart distribution is embedded in the improved Pearson type-VII (PTV) distribution, which can adaptively adjust the parameters to model the non-stationary heavy-tailed measurement noise. Besides, degree of freedom (DOF) parameters are surrogated by the maximization of evidence lower bound (ELBO) in the variational Bayesian optimization framework instead of fixed value to handle uncertain non-Gaussian degrees. Then, this paper analytically derives fusion forms based on the maximum Versoria fusion criterion instead of the moment matching approach, which can provide a precise approximation for the PTV mixture distribution in the mixing and output steps combined with the weight Kullback-Leibler average theory. Simulation results demonstrate the superiority and robustness of the proposed algorithm in typical HGVs tracking when the measurement noise without priori statistics is non-stationary.


  • Three-Dimensional Distributed Cooperative Guidance via Motion Camouflage Theory Against Hypersonic Vehicles With Speed Advantages

    by Wenxue Chen, Changsheng Gao, Wuxing Jing

    To quickly achieve simultaneous or domain capture of the hypersonic vehicles whose flying can execute various kinds of maneuver types and speed has advantages, this paper explores an appointed time consensus-based three-dimensional distributed cooperative guidance scheme using multiple interceptors with relatively low speed for effectively. The leader-follower communication topology structure is first introduced by targeting the high-speed and high maneuverability targets, in which the leader with a seeker detects target information and communicates with followers who are seeker-less. Then, the appointed time consensus distributed cooperative algorithm is ultimately derived based on the specified time convergence theory, motion camouflage technique, and fast non-singular terminal sliding mode control (FNSTSMC). The theory proves the proposed cooperative guidance scheme is robust and can achieve convergence at a preset time. Meanwhile, the leader carrying the seeker satisfies the MC constraint and can successfully realize the role of camouflage and hide the detection information. To this end, simulations illustrate the distributed cooperative guidance strategy's effectiveness, superiority, and robustness.


  • Trajectory Correction of the Rocket for Aerodynamic Load Shedding Based on Deep Neural Network and the Chaotic Evolution Strategy With Covariance Matrix Adaptation

    by Guanghui Cheng, Yudong Hu, Wuxing Jing, Ruoming An, Changsheng Gao

    The article studies the problem of trajectory correction optimization for aerodynamic load shedding in the rocket's ascending phase considering the wind. Based on the statistical horizontal wind field, the weakest wind field is proposed to plan the nominal trajectory, and the strongest wind field is proposed to test the performance of the designed trajectory. Considering the weakest wind field, two time-varying correction coefficients are calculated by one deep neural network unlike the traditional methods, and used to plan the rocket's flight attitudes when optimizing the rocket's trajectory. There are a large number of parameters to be optimized in this problem, so the traditional trajectory optimization techniques may suffer from poor convergence issues. By introducing the chaotic function into the traditional evolution strategy with covariance matrix adaptation, a novel variant C-CMA-ES is proposed to solve the trajectory optimization problem, and its efficiency is demonstrated by some popular test functions. Besides, the cost function to be minimized is shaped based on the rocket's maximal normal aerodynamic load and final state deviations. Finally, compared with the other three strategies, the efficiency of the proposed trajectory correction strategy is demonstrated by multiple simulation scenarios considering the strongest wind field and the Monte Carlo method considering the random wind fields.


  • Open Access

    Performance Assessment of Closed-Brayton-Cycle and Thermoelectric Generator Combined Power Generation System Coupled with Hydrocarbon-Fueled Scramjet

    by Kunlin Cheng, Wuxing Jing, Jiahui Li, Jiang Qin

    Closed-Brayton-cycle (CBC) is a potential scheme to provide high-power electricity for hypersonic vehicles, but finite cold source onboard limits its power level. A thermoelectric generator (TEG) combined with CBC is a feasible power enhancement approach by extending the available temperature range of cold source. In this study, a performance assessment of the CBC-TEG combined power generation system coupled with hydrocarbon-fueled scramjet is performed to exhibit its possible operation characteristics and performance limitations on hypersonic vehicles. Results indicate that, at a fixed flight Mach number, a larger fuel equivalence ratio (φ) leads to a higher total electric power and CBC power but a lower TEG power. There are three limitations on the fuel equivalence ratio, TEG temperature difference, and combustion heat dissipation adjustment for the operation of CBC-TEG. The total power of CBC-TEG can be adjusted by φ, but the adjustable range becomes smaller at higher Ma. The electric quantity at unit fuel mass increases with φ, mainly due to the higher thermoelectric conversion efficiency. Moreover, the maximum value of the electric quantity at unit fuel mass for CBC-TEG reaches 277.0 kJ/kg, which is about 33.4% higher than that of standalone CBC.


  • Open Access

    An Aerodynamic Correction Technique for the Unsteady Subsonic Wing–Body Interference Model

    by Kun Mao, Wuxing Jing, Meihong Zhang, Huining Zhang

    This paper investigates a novel correction technique for the unsteady subsonic wing–body interference model. The correction technique considers the unsteady forces on the lifting boxes and the body elements of an idealized aircraft model. The chosen simulation model was a passenger aircraft, and the transonic unsteady aerodynamics in sinusoidal pitch motion at four different frequencies are analyzed. The unsteady aerodynamics of the uncorrected DLM (doublet lattice method), ECFT (enhanced correction factor technique) and the new unsteady wing–body correction method are compared to the unsteady CFD simulation results. The results show that when the frequency is small, the new unsteady wing–body correction method can obtain certain benefits in terms of accuracy, for the lifting boxes and the body elements as well.

  • Open Access

    Dynamic Characteristics Analysis for a Novel Double-Rotor He-Xe Closed-Brayton-Cycle Space Nuclear Power Generation System

    by Kunlin Cheng, Jiahui Li, Jianchi Yu, Jiang Qin, Wuxing Jing

    The growing demand for electricity in long-duration space missions has become a pressing concern. The space nuclear closed-Brayton-cycle (CBC) power generation system offers advantages in power output, operational lifespan, and range. However, a significant speed disparity exists between its compressor and alternator. To address this challenge, this paper proposes a double-rotor CBC configuration. A corresponding dynamic model that couples the nuclear reactor and radiator is formulated, and dynamic analysis is conducted to facilitate system control. The study delves into the dynamic start-up process of the double-rotor CBC system and examines how various component parameters impact its power generation performance. The findings indicate that through the introduction of suitable reactivity to regulate reactor power and the incorporation of a PID controller to manage flow distribution between two turbines, the system can achieve start-up within 5200 s. Moreover, the innovative double-rotor structure suggested in this paper enables the separation of compressor and alternator speeds. Consequently, the compressor and alternator can operate within their optimal speed ranges independently, which is a feature that holds potential benefits for the system’s practical implementation. In addition, the steady-state operation of the system showcases the recuperator’s heat transfer power at around 1127.60 kW, a parameter of significant importance. Following steady-state operation, the double-rotor CBC system demonstrated an electrical power output of 175.99 kW and a thermal efficiency of 32.38%.