Tim Rieth
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tim Rieth has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Ian D. Sharp
Walter Schottky Institute Technical University of Munich Garching Germany
5 shared publications - Matthias M. May
Universität Tübingen Auf der Morgenstelle 15
2 shared publications - Oliver Bienek
Walter Schottky Institut Technische Universität München Am Coulombwall 4 85748 Garching Germany
2 shared publications - Verena Streibel
Walter Schottky Institute Technical University of Munich Garching Germany
2 shared publications - Alex Henning
Walter Schottky Institute and Physics Department Technical University of Munich 85748 Garching Germany
1 shared publication Benedikt Fuchs
Walter Schottky Institute, Technical University of Munich 1 , Am Coulombwall 4, 85748 Garching, Germany
1 shared publication
Latest Publications
- Open Access
- 5 November 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (45) , 62249-62262
Controlling Compensation Doping via Multivalent Platinum Acceptors in Tantalum Oxide Thin Films
Heterostructures of platinum (Pt) and tantalum oxide (Ta2O5) find widespread use in electronic and energy-conversion device applications, yet the electronic role of Pt incorporated within Ta2O5 remains poorly understood. Here, we investigate the influence of Pt incorporation on the electronic structure and properties of amorphous Ta2O5 using two precisely controlled ternary atomic layer deposition (ALD) pathways. Oxygen plasma-enhanced deposition produces host matrices with significantly lower native defect and impurity concentrations than conventional thermal water-based ALD, enabling a systematic investigation of the interplay between Pt dopants and native defects. Controlled Pt incorporation over the range of 0.9–1.9 atom % yields homogeneous, amorphous Pt-doped Ta2O5 thin films containing exclusively Pt(II) and Pt(IV) oxidation states, with no evidence of metallic Pt formation. While the optical bandgap of the Ta2O5 host matrix remains largely unchanged, Pt incorporation introduces optically active acceptor states near the valence band maximum, increases sub-bandgap absorption, and shifts the Fermi level toward the midgap. The relative Pt(II)/Pt(IV) population depends strongly on the defect landscape of the host matrix and exhibits a linear dependence on the Fermi level position, demonstrating Fermi level-controlled charge compensation between native donor defects and multivalent Pt acceptor states. Density functional theory corroborates the acceptor character of Pt and assigns the introduced states primarily to Pt 5d orbitals. Experimentally constructed band diagrams and charge transport measurements further show that Pt incorporation provides a direct means of tuning the electronic properties of Ta2O5. These results demonstrate that multivalent Pt doping serves as a controllable strategy for engineering the electronic structure and transport characteristics of functional Ta2O5 thin films, with direct relevance to memristive, dielectric, and photoelectrochemical devices.
- 5 November 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (45) , 62249-62262
Open AccessControlling Compensation Doping via Multivalent Platinum Acceptors in Tantalum Oxide Thin Films
Heterostructures of platinum (Pt) and tantalum oxide (Ta2O5) find widespread use in electronic and energy-conversion device applications, yet the electronic role of Pt incorporated within Ta2O5 remains poorly understood. Here, we investigate the influence of Pt incorporation on the electronic structure and properties of amorphous Ta2O5 using two precisely controlled ternary atomic layer deposition (ALD) pathways. Oxygen plasma-enhanced deposition produces host matrices with significantly lower native defect and impurity concentrations than conventional thermal water-based ALD, enabling a systematic investigation of the interplay between Pt dopants and native defects. Controlled Pt incorporation over the range of 0.9–1.9 atom % yields homogeneous, amorphous Pt-doped Ta2O5 thin films containing exclusively Pt(II) and Pt(IV) oxidation states, with no evidence of metallic Pt formation. While the optical bandgap of the Ta2O5 host matrix remains largely unchanged, Pt incorporation introduces optically active acceptor states near the valence band maximum, increases sub-bandgap absorption, and shifts the Fermi level toward the midgap. The relative Pt(II)/Pt(IV) population depends strongly on the defect landscape of the host matrix and exhibits a linear dependence on the Fermi level position, demonstrating Fermi level-controlled charge compensation between native donor defects and multivalent Pt acceptor states. Density functional theory corroborates the acceptor character of Pt and assigns the introduced states primarily to Pt 5d orbitals. Experimentally constructed band diagrams and charge transport measurements further show that Pt incorporation provides a direct means of tuning the electronic properties of Ta2O5. These results demonstrate that multivalent Pt doping serves as a controllable strategy for engineering the electronic structure and transport characteristics of functional Ta2O5 thin films, with direct relevance to memristive, dielectric, and photoelectrochemical devices.
- Open Access
- 29 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (21) , 16320-16332
Unassisted PEC Water Splitting Using III–V Multijunction Photoabsorbers: Insights into the Degradation Mechanism
- 29 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (21) , 16320-16332
Open AccessUnassisted PEC Water Splitting Using III–V Multijunction Photoabsorbers: Insights into the Degradation Mechanism
- Open Access
- 27 June 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (21)
Enhancing Direct Solar Water Splitting via ALD of Multifunctional TiO 2 /Pt Nanoparticle Coatings With Engineered Interfaces to GaAs/GaInP Tandem Cells
Direct solar water splitting is a promising approach for sustainably producing hydrogen, but significant materials challenges must be overcome to achieve high efficiency and long‐term stability. This work demonstrates a tailored interface treatment combined with multifunctional surface coatings that significantly enhance the efficiency and lifetime of GaAs/GaInP tandem cells capable of unassisted solar water splitting. In particular, it is shown that exposure of the top AlInP window layer to a remote H 2 plasma effectively reduces the interfacial oxide, enhancing charge extraction and maximizing the available photovoltage. Subsequent atomic layer deposition (ALD) of a bilayer coating comprising a TiO 2 corrosion protection layer and Pt nanoparticles enhances the durability of the device, enables efficient electron extraction, and provides high catalytic activity. By tuning the Pt ALD process, a nanoparticulate morphology is achieved, ensuring high catalytic activity at low loading, thus minimizing parasitic light absorption and improving adhesion. The optimized dual‐junction photoelectrode achieves an initial maximum solar‐to‐hydrogen (STH) conversion efficiency of 17.1%, stabilizing at 16.2% for 170 min of continuous operation. Importantly, the tailored interfaces of the device result in a considerable photovoltage surplus, providing a route to systems offering higher STH efficiencies or for integration of Group III‐V semiconductor‐on‐Si tandems.
- 27 June 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (21)
Open AccessEnhancing Direct Solar Water Splitting via ALD of Multifunctional TiO 2 /Pt Nanoparticle Coatings With Engineered Interfaces to GaAs/GaInP Tandem Cells
Direct solar water splitting is a promising approach for sustainably producing hydrogen, but significant materials challenges must be overcome to achieve high efficiency and long‐term stability. This work demonstrates a tailored interface treatment combined with multifunctional surface coatings that significantly enhance the efficiency and lifetime of GaAs/GaInP tandem cells capable of unassisted solar water splitting. In particular, it is shown that exposure of the top AlInP window layer to a remote H 2 plasma effectively reduces the interfacial oxide, enhancing charge extraction and maximizing the available photovoltage. Subsequent atomic layer deposition (ALD) of a bilayer coating comprising a TiO 2 corrosion protection layer and Pt nanoparticles enhances the durability of the device, enables efficient electron extraction, and provides high catalytic activity. By tuning the Pt ALD process, a nanoparticulate morphology is achieved, ensuring high catalytic activity at low loading, thus minimizing parasitic light absorption and improving adhesion. The optimized dual‐junction photoelectrode achieves an initial maximum solar‐to‐hydrogen (STH) conversion efficiency of 17.1%, stabilizing at 16.2% for 170 min of continuous operation. Importantly, the tailored interfaces of the device result in a considerable photovoltage surplus, providing a route to systems offering higher STH efficiencies or for integration of Group III‐V semiconductor‐on‐Si tandems.
- Open Access
- 12 February 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (7)
Suppressing substrate oxidation during plasma-enhanced atomic layer deposition on semiconductor surfaces
Plasma-enhanced atomic layer deposition (PE-ALD) is widely employed in microelectronics, energy, and sensing applications. Typically, PE-ALD processes for metal oxides utilize remote inductively coupled plasmas operated at powers of >200 W, ensuring a sufficient flux of oxygen radicals to the growth surface. However, this approach often leads to significant oxidation of chemically sensitive substrates, including most technological semiconductors. Here, we demonstrate that plasma powers as low as 5 W can effectively suppress substrate oxidation while maintaining the structural, optical, and electronic quality of the films. Specifically, we investigate the growth of titanium oxide (TiOx) using two commonly used metalorganic precursors, titanium isopropoxide and tetrakis(dimethylamino)titanium. Films deposited with 5 and 300 W oxygen plasma power are nearly indiscernible from one another, exhibiting significantly lower defect concentrations than those obtained from thermal ALD with H2O. The low plasma power process preserves desired physical characteristics of PE-ALD films, including large optical constants (n > 2.45 at 589 nm), negligible defect-induced sub-bandgap optical absorption (α < 102 cm−1), and high electrical resistivity (>105 Ω cm). Similar behavior, including suppressed interface oxidation and low defect content, is observed on both Si and InP substrates. As an example application of this approach, the assessment of InP/TiOx photocathodes and Si/TiOx photoanodes reveals a significant improvement in the photocurrent onset potential in both cases, enabled by suppressed substrate oxidation during low power PE-ALD. Overall, low power PE-ALD represents a generally applicable strategy for producing high quality metal oxide thin films while minimizing detrimental substrate reactions.
- 12 February 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (7)
Open AccessSuppressing substrate oxidation during plasma-enhanced atomic layer deposition on semiconductor surfaces
Plasma-enhanced atomic layer deposition (PE-ALD) is widely employed in microelectronics, energy, and sensing applications. Typically, PE-ALD processes for metal oxides utilize remote inductively coupled plasmas operated at powers of >200 W, ensuring a sufficient flux of oxygen radicals to the growth surface. However, this approach often leads to significant oxidation of chemically sensitive substrates, including most technological semiconductors. Here, we demonstrate that plasma powers as low as 5 W can effectively suppress substrate oxidation while maintaining the structural, optical, and electronic quality of the films. Specifically, we investigate the growth of titanium oxide (TiOx) using two commonly used metalorganic precursors, titanium isopropoxide and tetrakis(dimethylamino)titanium. Films deposited with 5 and 300 W oxygen plasma power are nearly indiscernible from one another, exhibiting significantly lower defect concentrations than those obtained from thermal ALD with H2O. The low plasma power process preserves desired physical characteristics of PE-ALD films, including large optical constants (n > 2.45 at 589 nm), negligible defect-induced sub-bandgap optical absorption (α < 102 cm−1), and high electrical resistivity (>105 Ω cm). Similar behavior, including suppressed interface oxidation and low defect content, is observed on both Si and InP substrates. As an example application of this approach, the assessment of InP/TiOx photocathodes and Si/TiOx photoanodes reveals a significant improvement in the photocurrent onset potential in both cases, enabled by suppressed substrate oxidation during low power PE-ALD. Overall, low power PE-ALD represents a generally applicable strategy for producing high quality metal oxide thin films while minimizing detrimental substrate reactions.
- Open Access
- 26 January 2024
- Published by Wiley in ChemSusChem
- Vol. 17 (10) , e202301452
Tuning Carbon Dioxide Reduction Reaction Selectivity of Bi Single‐Atom Electrocatalysts with Controlled Coordination Environments
Control over product selectivity of the electrocatalytic CO2 reduction reaction (CO2RR) is a crucial challenge for the sustainable production of carbon‐based chemical feedstocks. In this regard, single‐atom catalysts (SACs) are promising materials due to their tunable coordination environments, which could enable tailored catalytic activities and selectivities, as well as new insights into structure‐activity relationships. However, direct evidence for selectivity control via systematic tuning of the SAC coordination environment is scarce. In this work, we have synthesized two differently coordinated Bi SACs anchored to the same host material (carbon black) and characterized their CO2RR activities and selectivities. We find that oxophilic, oxygen‐coordinated Bi atoms produce HCOOH, while nitrogen‐coordinated Bi atoms generate CO. Importantly, use of the same support material assured that alternation of the coordination environment is the dominant factor for controlling the CO2RR product selectivity. Overall, this work demonstrates the structure‐activity relationship of Bi SACs, which can be utilized to establish control over CO2RR product distributions, and highlights the promise for engineering atomic coordination environments of SACs to tune reaction pathways.
- 26 January 2024
- Published by Wiley in ChemSusChem
- Vol. 17 (10) , e202301452
Open AccessTuning Carbon Dioxide Reduction Reaction Selectivity of Bi Single‐Atom Electrocatalysts with Controlled Coordination Environments
Control over product selectivity of the electrocatalytic CO2 reduction reaction (CO2RR) is a crucial challenge for the sustainable production of carbon‐based chemical feedstocks. In this regard, single‐atom catalysts (SACs) are promising materials due to their tunable coordination environments, which could enable tailored catalytic activities and selectivities, as well as new insights into structure‐activity relationships. However, direct evidence for selectivity control via systematic tuning of the SAC coordination environment is scarce. In this work, we have synthesized two differently coordinated Bi SACs anchored to the same host material (carbon black) and characterized their CO2RR activities and selectivities. We find that oxophilic, oxygen‐coordinated Bi atoms produce HCOOH, while nitrogen‐coordinated Bi atoms generate CO. Importantly, use of the same support material assured that alternation of the coordination environment is the dominant factor for controlling the CO2RR product selectivity. Overall, this work demonstrates the structure‐activity relationship of Bi SACs, which can be utilized to establish control over CO2RR product distributions, and highlights the promise for engineering atomic coordination environments of SACs to tune reaction pathways.