Timea Pap
Timea Pap has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Adrian Vasile Mureșan
Department of Vascular Surgery, George Emil Palade University of Medicine, Pharmacy, Science and Technology of Targu Mures, 540139 Targu Mures, Romania
1 shared publication - Alexandru Petru Ion
George Emil Palade University of Medicine, Pharmacy, Science and Technology of Targu Mures, 540139 Targu Mures, Romania
1 shared publication Andrei Marian Feier
George Emil Palade Univ Med, Pharm Sci & Technol Targu Mures, Orthopaed, Targu Mures, Romania
1 shared publicationAndrei Marin
Carol Davila Univ Med & Pharm, Plast & Reconstruct Surg, Bucharest, Romania
1 shared publication- Bogdan Andrei Cordoș
Regenerative Medicine Laboratory, Center for Advanced Medical and Pharmaceutical Research, George Emil Palade University of Medicine, Pharmacy, Science and Technology of Targu Mures, 38 Gheorghe Marinescu Street, 540139 Targu Mures, Romania
1 shared publication Bogdan Cordoș
George Emil Palade Univ Med, Ctr Expt Imaging Studies, Pharm Sci & Technol Targu Mures, Targu Mures, Romania
1 shared publication
Latest Publications
- Open Access
- 1 December 2024
- Published by Walter de Gruyter GmbH in Bulletin of Medical Sciences
- Vol. 97 (2) , 146-156
Prognostic Histopathological Parameters and Their Correlation in the Clinical-Pathological Examination of Melanomas
Melanoma is one of the most aggressive skin cancers, with a steadily increasing incidence worldwide, particularly among Caucasian populations. Early diagnosis and accurate staging are essential for improving patient outcomes. The aim of this study was to evaluate the relationship between histopathological parameters and clinical tumour characteristics. This retrospective study analysed data from 41 melanoma patients treated at the Târgu Mureș Emergency Hospital between 2023 and 2025. The assessment included tumour thickness (Breslow index), Clark level of invasion, mitotic activity, and ulceration, which were compared with clinical characteristics. The results showed that tumours with ulceration were associated with significantly higher Breslow values, identifying ulceration as a key marker of aggressiveness. Tumour location also correlated with staging: advanced stages were more frequent in the chest and abdominal regions, whereas early stages were more common on the face and lower limbs. Incorporating analysis of the tumour microenvironment, immunohistochemical markers, and molecular biomarkers could substantially enhance diagnostic precision and therapeutic strategies. Future research should therefore focus on the tumour microenvironment and personalized treatment approaches.
- 1 December 2024
- Published by Walter de Gruyter GmbH in Bulletin of Medical Sciences
- Vol. 97 (2) , 146-156
Open AccessPrognostic Histopathological Parameters and Their Correlation in the Clinical-Pathological Examination of Melanomas
Melanoma is one of the most aggressive skin cancers, with a steadily increasing incidence worldwide, particularly among Caucasian populations. Early diagnosis and accurate staging are essential for improving patient outcomes. The aim of this study was to evaluate the relationship between histopathological parameters and clinical tumour characteristics. This retrospective study analysed data from 41 melanoma patients treated at the Târgu Mureș Emergency Hospital between 2023 and 2025. The assessment included tumour thickness (Breslow index), Clark level of invasion, mitotic activity, and ulceration, which were compared with clinical characteristics. The results showed that tumours with ulceration were associated with significantly higher Breslow values, identifying ulceration as a key marker of aggressiveness. Tumour location also correlated with staging: advanced stages were more frequent in the chest and abdominal regions, whereas early stages were more common on the face and lower limbs. Incorporating analysis of the tumour microenvironment, immunohistochemical markers, and molecular biomarkers could substantially enhance diagnostic precision and therapeutic strategies. Future research should therefore focus on the tumour microenvironment and personalized treatment approaches.
- Open Access
- 14 June 2024
- Published by Springer Nature in Cureus
- Vol. 16 (6) , e62412
Biocompatible 3D-Printed Devices With Adipose Stem Cells in the Regenerative Process of Sciatic Nerve Lesions in Rodent Models: An Experimental Study
Introduction: Peripheral nerve injuries are a significant clinical challenge. The rat sciatic nerve serves as an ideal model for studying nerve regeneration. Extensive research has been conducted to unravel the intricate mechanisms involved in peripheral nerve regeneration, aiming to develop effective therapeutic strategies for nerve injury patients. Research including different types of materials that can be used as nerve guides like synthetic polymers have been investigated for their biocompatibility and molding properties. Among multiple stem cell types, adipose -derived stem cells (ASCs), bone marrow -derived mesenchymal stem cells (BM-MSCs), and induced pluripotent stem cells (iPSCs) have shown neuroprotective and regenerative important properties. Methods: The purposes of our study were to develop a protocol for rat sciatic nerve injury treated with 3Dprinted guide and adipose stem cells to investigate nerve regeneration through histologic examination and biomechanical characteristics of muscular tissue. We use 20 (100%) male Wistar rats, measuring between 350 g +/- 35 g, who underwent complete transection of the right sciatic nerve, resulting in a 1 cm defect. The group was separated into three subgroups: the first subgroup (n = 8) was treated with a 3D -printed guide with adipose stem cells, the second subgroup (n = 8) was treated with a 3D -printed guide without adipose stem cells, and the third subgroup (n = 4) was the control group. At four, eight, and 12 weeks, we measured with ultrasonography the grade of muscular atrophy. At 12 weeks, we harvested the sciatic nerve and performed a histological examination and mechanical investigation of the tibialis anterior muscle. Results: On the examined specimen of the first subgroup, cross -sectioned nerve structures were present, surrounded by a mature fibro-adipose connective tissue, with blood vessels. In the second subgroup, no nerve structure was observed on the examined sections, but in the polymorphic inflammatory infiltrate and control group, no signs of regeneration were found. Conclusions: The present study shows a promising potential when utilizing adipose stem cell -based therapies for promoting peripheral nerve regeneration following large (>1 cm) nerve defects knowing that at this size, regeneration is impossible with known treatments.
- 14 June 2024
- Published by Springer Nature in Cureus
- Vol. 16 (6) , e62412
Open AccessBiocompatible 3D-Printed Devices With Adipose Stem Cells in the Regenerative Process of Sciatic Nerve Lesions in Rodent Models: An Experimental Study
Introduction: Peripheral nerve injuries are a significant clinical challenge. The rat sciatic nerve serves as an ideal model for studying nerve regeneration. Extensive research has been conducted to unravel the intricate mechanisms involved in peripheral nerve regeneration, aiming to develop effective therapeutic strategies for nerve injury patients. Research including different types of materials that can be used as nerve guides like synthetic polymers have been investigated for their biocompatibility and molding properties. Among multiple stem cell types, adipose -derived stem cells (ASCs), bone marrow -derived mesenchymal stem cells (BM-MSCs), and induced pluripotent stem cells (iPSCs) have shown neuroprotective and regenerative important properties. Methods: The purposes of our study were to develop a protocol for rat sciatic nerve injury treated with 3Dprinted guide and adipose stem cells to investigate nerve regeneration through histologic examination and biomechanical characteristics of muscular tissue. We use 20 (100%) male Wistar rats, measuring between 350 g +/- 35 g, who underwent complete transection of the right sciatic nerve, resulting in a 1 cm defect. The group was separated into three subgroups: the first subgroup (n = 8) was treated with a 3D -printed guide with adipose stem cells, the second subgroup (n = 8) was treated with a 3D -printed guide without adipose stem cells, and the third subgroup (n = 4) was the control group. At four, eight, and 12 weeks, we measured with ultrasonography the grade of muscular atrophy. At 12 weeks, we harvested the sciatic nerve and performed a histological examination and mechanical investigation of the tibialis anterior muscle. Results: On the examined specimen of the first subgroup, cross -sectioned nerve structures were present, surrounded by a mature fibro-adipose connective tissue, with blood vessels. In the second subgroup, no nerve structure was observed on the examined sections, but in the polymorphic inflammatory infiltrate and control group, no signs of regeneration were found. Conclusions: The present study shows a promising potential when utilizing adipose stem cell -based therapies for promoting peripheral nerve regeneration following large (>1 cm) nerve defects knowing that at this size, regeneration is impossible with known treatments.
- Open Access
- 15 February 2024
- Published by MDPI AG in Bioengineering
- Vol. 11 (2) , 184
Application of Adipose Stem Cells in 3D Nerve Guidance Conduit Prevents Muscle Atrophy and Improves Distal Muscle Compliance in a Peripheral Nerve Regeneration Model
Background: Peripheral nerve injuries (PNIs) represent a significant clinical problem, and standard approaches to nerve repair have limitations. Recent breakthroughs in 3D printing and stem cell technologies offer a promising solution for nerve regeneration. The main purpose of this study was to examine the biomechanical characteristics in muscle tissue distal to a nerve defect in a murine model of peripheral nerve regeneration from physiological stress to failure. Methods: In this experimental study, we enrolled 18 Wistar rats in which we created a 10 mm sciatic nerve defect. Furthermore, we divided them into three groups as follows: in Group 1, we used 3D nerve guidance conduits (NGCs) and adipose stem cells (ASCs) in seven rats; in Group 2, we used only 3D NGCs for seven rats; and in Group 3, we created only the defect in four rats. We monitored the degree of atrophy at 4, 8, and 12 weeks by measuring the diameter of the tibialis anterior (TA) muscle. At the end of 12 weeks, we took the TA muscle and analyzed it uniaxially at 10% stretch until failure. Results: In the group of animals with 3D NGCs and ASCs, we recorded the lowest degree of atrophy at 4 weeks, 8 weeks, and 12 weeks after nerve reconstruction. At 10% stretch, the control group had the highest Cauchy stress values compared to the 3D NGC group (0.164 MPa vs. 0.141 MPa, p = 0.007) and the 3D NGC + ASC group (0.164 MPa vs. 0.123 MPa, p = 0.007). In addition, we found that the control group (1.763 MPa) had the highest TA muscle stiffness, followed by the 3D NGC group (1.412 MPa), with the best muscle elasticity showing in the group in which we used 3D NGC + ASC (1.147 MPa). At failure, TA muscle samples from the 3D NGC + ASC group demonstrated better compliance and a higher degree of elasticity compared to the other two groups (p = 0.002 and p = 0.008). Conclusions: Our study demonstrates that the combination of 3D NGC and ASC increases the process of nerve regeneration and significantly improves the compliance and mechanical characteristics of muscle tissue distal to the injury site in a PNI murine model.
- 15 February 2024
- Published by MDPI AG in Bioengineering
- Vol. 11 (2) , 184
Open AccessApplication of Adipose Stem Cells in 3D Nerve Guidance Conduit Prevents Muscle Atrophy and Improves Distal Muscle Compliance in a Peripheral Nerve Regeneration Model
Background: Peripheral nerve injuries (PNIs) represent a significant clinical problem, and standard approaches to nerve repair have limitations. Recent breakthroughs in 3D printing and stem cell technologies offer a promising solution for nerve regeneration. The main purpose of this study was to examine the biomechanical characteristics in muscle tissue distal to a nerve defect in a murine model of peripheral nerve regeneration from physiological stress to failure. Methods: In this experimental study, we enrolled 18 Wistar rats in which we created a 10 mm sciatic nerve defect. Furthermore, we divided them into three groups as follows: in Group 1, we used 3D nerve guidance conduits (NGCs) and adipose stem cells (ASCs) in seven rats; in Group 2, we used only 3D NGCs for seven rats; and in Group 3, we created only the defect in four rats. We monitored the degree of atrophy at 4, 8, and 12 weeks by measuring the diameter of the tibialis anterior (TA) muscle. At the end of 12 weeks, we took the TA muscle and analyzed it uniaxially at 10% stretch until failure. Results: In the group of animals with 3D NGCs and ASCs, we recorded the lowest degree of atrophy at 4 weeks, 8 weeks, and 12 weeks after nerve reconstruction. At 10% stretch, the control group had the highest Cauchy stress values compared to the 3D NGC group (0.164 MPa vs. 0.141 MPa, p = 0.007) and the 3D NGC + ASC group (0.164 MPa vs. 0.123 MPa, p = 0.007). In addition, we found that the control group (1.763 MPa) had the highest TA muscle stiffness, followed by the 3D NGC group (1.412 MPa), with the best muscle elasticity showing in the group in which we used 3D NGC + ASC (1.147 MPa). At failure, TA muscle samples from the 3D NGC + ASC group demonstrated better compliance and a higher degree of elasticity compared to the other two groups (p = 0.002 and p = 0.008). Conclusions: Our study demonstrates that the combination of 3D NGC and ASC increases the process of nerve regeneration and significantly improves the compliance and mechanical characteristics of muscle tissue distal to the injury site in a PNI murine model.
- Open Access
- 1 July 2022
- Published by Walter de Gruyter GmbH in Bulletin of Medical Sciences
- Vol. 95 (1) , 78-88
Correlations of hospital length of stay and mortality with the osteoporotic hip-fracture type, treatment, the sociodemographic and hospital variables
Introduction: Diseases related to the elderly, including osteoporosis and the resulting fractures have a high incidence and are characterized by a high risk of early death. Most hip fractures are treated surgically. Its cost projections vary widely depending on the region, the level of institutional care, and the surgical solutions used. Material and method: We performed a retrospective study using hospital data from 2018-2019. The study included patients whose main diagnosis was: S72.0 - femoral neck fracture, S72.1 - pertrochanteric fracture, S72.2 - subtrochanteric fracture. We used hospital data from seven Romanian counties, Arad, Arges, Bucharest, Szilágy, Temes, Tulcea and Vaslui. Results: Women were significantly more affected (68.3%) than men, however the risk of mortality was 1.7 times higher among men. The average age was 77.2 years, 86% of the patients were over 65 years old. Most patients (69.3% ) were urban residents, but they were also characterized by a higher LOS and mortality. Discussion: Fracture types, gender distribution and correlation with urbanization of the fractures are consistent with international epidemiological data. Regression analysis shows a significant correlation between the length of hospital stay and the following variables: gender, environment, age, diagnosis, type of hospital and death. Regarding the average time of hospital stay, the shortest duration of hospitalization was in Vaslui and Tulcea (9.59 and 9.79 days), while the longest (13.42 and 14.61 days) were in Arad and Arges counties. Conclusions: On average, the patient hospitalization time in the examined counties is higher (13 days) than the Romanian average (11 days). Mortality is significantly higher among men, urban residents and those who suffer subtrochanteric fractures. Regarding the costs per patient of fractures, it can be said that Arad is the most economical, while Salaj county is the least cost-effective.
- 1 July 2022
- Published by Walter de Gruyter GmbH in Bulletin of Medical Sciences
- Vol. 95 (1) , 78-88
Open AccessCorrelations of hospital length of stay and mortality with the osteoporotic hip-fracture type, treatment, the sociodemographic and hospital variables
Introduction: Diseases related to the elderly, including osteoporosis and the resulting fractures have a high incidence and are characterized by a high risk of early death. Most hip fractures are treated surgically. Its cost projections vary widely depending on the region, the level of institutional care, and the surgical solutions used. Material and method: We performed a retrospective study using hospital data from 2018-2019. The study included patients whose main diagnosis was: S72.0 - femoral neck fracture, S72.1 - pertrochanteric fracture, S72.2 - subtrochanteric fracture. We used hospital data from seven Romanian counties, Arad, Arges, Bucharest, Szilágy, Temes, Tulcea and Vaslui. Results: Women were significantly more affected (68.3%) than men, however the risk of mortality was 1.7 times higher among men. The average age was 77.2 years, 86% of the patients were over 65 years old. Most patients (69.3% ) were urban residents, but they were also characterized by a higher LOS and mortality. Discussion: Fracture types, gender distribution and correlation with urbanization of the fractures are consistent with international epidemiological data. Regression analysis shows a significant correlation between the length of hospital stay and the following variables: gender, environment, age, diagnosis, type of hospital and death. Regarding the average time of hospital stay, the shortest duration of hospitalization was in Vaslui and Tulcea (9.59 and 9.79 days), while the longest (13.42 and 14.61 days) were in Arad and Arges counties. Conclusions: On average, the patient hospitalization time in the examined counties is higher (13 days) than the Romanian average (11 days). Mortality is significantly higher among men, urban residents and those who suffer subtrochanteric fractures. Regarding the costs per patient of fractures, it can be said that Arad is the most economical, while Salaj county is the least cost-effective.