Jerrin Joy Varughese
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jerrin Joy Varughese has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Sreekanth Meledath Sadanandan
Department of Manufacturing Engineering, School of Mechanical Engineering Vellore Institute of Technology Vellore Tamil Nadu India
7 shared publications - Arun Sam Varghese
Department of Mechanical Engineering Carmel College of Engineering & Technology Alappuzha Kerala India
5 shared publications - Lince Mathew Thomas
Department of Manufacturing Engineering, School of Mechanical Engineering Vellore Institute of Technology Vellore Tamil Nadu India
5 shared publications - Dinah Ann Varughese
Department of Electronics and Communication Engineering, School of Engineering Dayananda Sagar University Bengaluru India
2 shared publications - Sumangala Thondiyanoor Pisharam
Department of Physics, School of Advanced Sciences Vellore Institute of Technology Vellore Tamil Nadu India
2 shared publications Abhishek S
1 shared publication
Latest Publications
- 22 September 2026
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 37 (9) , e70743
Solvent‐Assisted Dispersion of Multiwalled Carbon Nanotubes in Epoxy‐Based Glass Fiber‐Reinforced Polymer Composites: Experimental Investigation, Micromechanical Modeling, and Machine Learning Prediction
The investigation examines the improvement of mechanical behavior of epoxy and glass fiber (GF)‐reinforced nanocomposites containing multiwalled carbon nanotubes (MWCNT) with weight fractions of 0.25, 0.50, and 0.75 respectively using ultrasonication‐assisted dispersion in organic solvents namely, ethanol and dimethyl ketone. A systematic approach to solvent‐mediated dispersion was investigated and assessed its impact on macro‐scale mechanical response, interfacial interaction, and microstructural morphology. Epoxy nanocomposite with 0.5 wt.% ethanol‐dispersed MWCNT demonstrated a notable 23% increase in ultimate tensile strength (48 MPa), as compared to pure epoxy. In MWCNT/glass fiber‐reinforced polymer (GFRP) nanocomposite, 0.5 wt.% MWCNT improves the Young's modulus by 5.3%, whereas 0.25 wt.% MWCNT results in a significant 48.54% increase in flexural strength (339.4 MPa) and a remarkable 142.22% rise in maximum flexural extension (15.26 mm) as compared to pristine GFRP. The Halpin–Tsai micromechanical model and the Mori–Tanaka mean field homogenization approach are used to provide a mechanistic basis for the experimental observations. This allows for a quantitative evaluation of the impact of filler aspect ratio, volume fraction, and orientation on composite elastic response. Agglomeration effects and solvent residuals phenomena are quantitatively modeled using an agglomeration efficiency parameter, and the empirically obtained moduli are contextualized against Halpin–Tsai predictions. Moreover, machine learning models accurately predict mechanical characteristics, demonstrating R 2 values ranging from 0.976 to 0.983. This research establishes a dual analytical‐predictive framework with high translational potential for advanced structural applications.
- 22 September 2026
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 37 (9) , e70743
Solvent‐Assisted Dispersion of Multiwalled Carbon Nanotubes in Epoxy‐Based Glass Fiber‐Reinforced Polymer Composites: Experimental Investigation, Micromechanical Modeling, and Machine Learning Prediction
The investigation examines the improvement of mechanical behavior of epoxy and glass fiber (GF)‐reinforced nanocomposites containing multiwalled carbon nanotubes (MWCNT) with weight fractions of 0.25, 0.50, and 0.75 respectively using ultrasonication‐assisted dispersion in organic solvents namely, ethanol and dimethyl ketone. A systematic approach to solvent‐mediated dispersion was investigated and assessed its impact on macro‐scale mechanical response, interfacial interaction, and microstructural morphology. Epoxy nanocomposite with 0.5 wt.% ethanol‐dispersed MWCNT demonstrated a notable 23% increase in ultimate tensile strength (48 MPa), as compared to pure epoxy. In MWCNT/glass fiber‐reinforced polymer (GFRP) nanocomposite, 0.5 wt.% MWCNT improves the Young's modulus by 5.3%, whereas 0.25 wt.% MWCNT results in a significant 48.54% increase in flexural strength (339.4 MPa) and a remarkable 142.22% rise in maximum flexural extension (15.26 mm) as compared to pristine GFRP. The Halpin–Tsai micromechanical model and the Mori–Tanaka mean field homogenization approach are used to provide a mechanistic basis for the experimental observations. This allows for a quantitative evaluation of the impact of filler aspect ratio, volume fraction, and orientation on composite elastic response. Agglomeration effects and solvent residuals phenomena are quantitatively modeled using an agglomeration efficiency parameter, and the empirically obtained moduli are contextualized against Halpin–Tsai predictions. Moreover, machine learning models accurately predict mechanical characteristics, demonstrating R 2 values ranging from 0.976 to 0.983. This research establishes a dual analytical‐predictive framework with high translational potential for advanced structural applications.
- 21 April 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (14) , 12887-12901
Molybdenum Disulfide‐Functionalized Multiwalled Carbon Nanotubes Based Epoxy Coating on Epoxy/Carbon Fiber Laminates for Improved Erosion Resistance
The investigation evaluates the erosion behavior of carbon fiber (CF) reinforced epoxy laminates, protected with an epoxy‐based coating system incorporating synthesized molybdenum disulfide (MoS 2 ) functionalized multiwalled carbon nanotubes (MWCNTs) hybrid nanoparticles. The nanocomposite coating with 0.5 wt% MoS 2 ‐MWCNTs hybrid demonstrated a superior resistance to severe erosive wear conditions and exhibited clear deviation in erosion response as compared to conventional epoxy/CF composites. The epoxy hybrid nanocomposite coated epoxy/CF laminates displayed a semi‐ductile erosion characteristic, with a maximum erosion rate of 1132 mg/kg, occurring at a 30° impact angle, and the minimum erosion rate of 600 mg/kg occurring at a 90° impact angle. Morphological analysis of the eroded surface by FESEM revealed that micro‐plowing and micro‐cutting mechanisms were predominant at the hybrid nanocomposite coated regions, whereas fiber cutting mechanisms were primarily observed in the epoxy/CF laminates.
- 21 April 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (14) , 12887-12901
Molybdenum Disulfide‐Functionalized Multiwalled Carbon Nanotubes Based Epoxy Coating on Epoxy/Carbon Fiber Laminates for Improved Erosion Resistance
The investigation evaluates the erosion behavior of carbon fiber (CF) reinforced epoxy laminates, protected with an epoxy‐based coating system incorporating synthesized molybdenum disulfide (MoS 2 ) functionalized multiwalled carbon nanotubes (MWCNTs) hybrid nanoparticles. The nanocomposite coating with 0.5 wt% MoS 2 ‐MWCNTs hybrid demonstrated a superior resistance to severe erosive wear conditions and exhibited clear deviation in erosion response as compared to conventional epoxy/CF composites. The epoxy hybrid nanocomposite coated epoxy/CF laminates displayed a semi‐ductile erosion characteristic, with a maximum erosion rate of 1132 mg/kg, occurring at a 30° impact angle, and the minimum erosion rate of 600 mg/kg occurring at a 90° impact angle. Morphological analysis of the eroded surface by FESEM revealed that micro‐plowing and micro‐cutting mechanisms were predominant at the hybrid nanocomposite coated regions, whereas fiber cutting mechanisms were primarily observed in the epoxy/CF laminates.
- 1 April 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (12) , 11319-11338
Synergistic Enhancement of Mechanical and Interfacial Properties in Carbon Fiber Epoxy Nanocomposites via Dual Functionalization of Fiber and Exfoliated Hexagonal Boron Nitride Nanosheets
A dual interfacial engineering strategy is proposed to enhance the mechanical and interlaminar performance of carbon fiber (CF)‐reinforced epoxy (EP) nanocomposites by simultaneously silanizing CF and exfoliated hexagonal boron nitride nanosheets (hBNNs). Sodium hydroxide assisted hydroxylation, followed by 3‐aminopropyltriethoxysilane (APTES) functionalization, enabled covalent integration at the fiber–matrix and filler–matrix interfaces. XPS analysis confirmed the formation of SiOSi and SiOB linkages on APTES functionalized hBNNs, establishing a chemically interconnected interface. Wettability improved significantly, with the contact angle reducing from 85.48° for untreated CF to 74.46° after salinization of CF. The dual‐functionalized epoxy composite exhibited a tensile strength of 409 ± 9 MPa and modulus of 32.05 ± 2 GPa, corresponding to enhancements of 22% and 67.45%, respectively, over pristine CF/EP. Flexural strength increased from 492 ± 6 MPa to 537 ± 11 MPa, while interlaminar shear strength improved from 37.08 ± 0.06 to 43.50 ± 0.04 MPa, demonstrating superior resistance to shear‐driven failure. Fiber volume fraction was consistently maintained within 41% with void content less than 5%, confirming that the performance gains arise from interfacial engineering. The chemically integrated hybrid network induces constrained interphase regions and cooperative stress‐transfer pathways in the polymer matrix, generating a positive synergistic effect beyond additive reinforcement behavior.
- 1 April 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (12) , 11319-11338
Synergistic Enhancement of Mechanical and Interfacial Properties in Carbon Fiber Epoxy Nanocomposites via Dual Functionalization of Fiber and Exfoliated Hexagonal Boron Nitride Nanosheets
A dual interfacial engineering strategy is proposed to enhance the mechanical and interlaminar performance of carbon fiber (CF)‐reinforced epoxy (EP) nanocomposites by simultaneously silanizing CF and exfoliated hexagonal boron nitride nanosheets (hBNNs). Sodium hydroxide assisted hydroxylation, followed by 3‐aminopropyltriethoxysilane (APTES) functionalization, enabled covalent integration at the fiber–matrix and filler–matrix interfaces. XPS analysis confirmed the formation of SiOSi and SiOB linkages on APTES functionalized hBNNs, establishing a chemically interconnected interface. Wettability improved significantly, with the contact angle reducing from 85.48° for untreated CF to 74.46° after salinization of CF. The dual‐functionalized epoxy composite exhibited a tensile strength of 409 ± 9 MPa and modulus of 32.05 ± 2 GPa, corresponding to enhancements of 22% and 67.45%, respectively, over pristine CF/EP. Flexural strength increased from 492 ± 6 MPa to 537 ± 11 MPa, while interlaminar shear strength improved from 37.08 ± 0.06 to 43.50 ± 0.04 MPa, demonstrating superior resistance to shear‐driven failure. Fiber volume fraction was consistently maintained within 41% with void content less than 5%, confirming that the performance gains arise from interfacial engineering. The chemically integrated hybrid network induces constrained interphase regions and cooperative stress‐transfer pathways in the polymer matrix, generating a positive synergistic effect beyond additive reinforcement behavior.
- Open Access
- 26 February 2026
- Published by Elsevier in Composites Part C: Open Access
- Vol. 19
Epoxy vitrimer based nanocomposites for EMI shielding: Integrating reprocessability, self-healing, and machine learning predictions
- 26 February 2026
- Published by Elsevier in Composites Part C: Open Access
- Vol. 19
Open AccessEpoxy vitrimer based nanocomposites for EMI shielding: Integrating reprocessability, self-healing, and machine learning predictions
- 14 October 2024
- Published by Wiley in Polymer Composites
- Vol. 46 (3) , 2190-2208
Influence of silane and polyethylene glycol functionalization of boron nitride nanosheets on mechanical and thermal properties of epoxy nanocomposites: Machine and deep learning forecasting
The influence of hexagonal boron nitride (hBN) nanosheet surface modification on epoxy nanocomposites' mechanical and thermal properties were investigated. An innovative approach was developed for synthesizing hBN nanosheets (hBNNs) via optimized ultrasonic‐assisted liquid‐phase exfoliation (UALPE), followed by functionalization with 3‐aminopropyltriethoxysilane (APTS) and polyethylene glycol (PEG600) for nanocomposite preparation. Compared to unmodified epoxy, nanocomposites containing 0.3 wt% of pristine hBNNs exhibited significant enhancements in flexural strength (125.28 MPa) and tensile strength (53.35 MPa), with respective increases of 40.57% and 43.23%. PEG‐hBNNs improved flexural and tensile strengths to 136.83 and 58.57 MPa, respectively. The most substantial enhancements were observed with APTS‐hBNNs, yielding flexural and tensile strengths of 174.13 and 63.53 MPa, reflecting increases of 95.37% and 70.50%, attributed to better interfacial interactions and a more effective crack deflection mechanism. Thermal stability analyses revealed superior performance of modified hBNNs epoxy nanocomposites, increasing 8.2°C and 6.3°C at 50 wt% degradation as compared to the unmodified system, owing to enhanced physical barrier properties. Structural and morphological analyses validated the successful exfoliation and modification of hBNNs. Predictive models utilizing machine and deep learning (DL) techniques, particularly DL with the adaptive moment estimation (ADAM) optimizer, effectively forecasted mechanical properties, achieving high R2 values.HIGHLIGHTS: 0.3 wt% modified hBNNs epoxy nanocomposite showed the highest mechanical strength Improved thermal stability of epoxy nanocomposite by modification of hBNNs Improved crack deflection mechanism in the presence of surface‐modified hBNNs Deep learning with ADAM optimizer showed high R2 and low prediction loss
- 14 October 2024
- Published by Wiley in Polymer Composites
- Vol. 46 (3) , 2190-2208
Influence of silane and polyethylene glycol functionalization of boron nitride nanosheets on mechanical and thermal properties of epoxy nanocomposites: Machine and deep learning forecasting
The influence of hexagonal boron nitride (hBN) nanosheet surface modification on epoxy nanocomposites' mechanical and thermal properties were investigated. An innovative approach was developed for synthesizing hBN nanosheets (hBNNs) via optimized ultrasonic‐assisted liquid‐phase exfoliation (UALPE), followed by functionalization with 3‐aminopropyltriethoxysilane (APTS) and polyethylene glycol (PEG600) for nanocomposite preparation. Compared to unmodified epoxy, nanocomposites containing 0.3 wt% of pristine hBNNs exhibited significant enhancements in flexural strength (125.28 MPa) and tensile strength (53.35 MPa), with respective increases of 40.57% and 43.23%. PEG‐hBNNs improved flexural and tensile strengths to 136.83 and 58.57 MPa, respectively. The most substantial enhancements were observed with APTS‐hBNNs, yielding flexural and tensile strengths of 174.13 and 63.53 MPa, reflecting increases of 95.37% and 70.50%, attributed to better interfacial interactions and a more effective crack deflection mechanism. Thermal stability analyses revealed superior performance of modified hBNNs epoxy nanocomposites, increasing 8.2°C and 6.3°C at 50 wt% degradation as compared to the unmodified system, owing to enhanced physical barrier properties. Structural and morphological analyses validated the successful exfoliation and modification of hBNNs. Predictive models utilizing machine and deep learning (DL) techniques, particularly DL with the adaptive moment estimation (ADAM) optimizer, effectively forecasted mechanical properties, achieving high R2 values.HIGHLIGHTS: 0.3 wt% modified hBNNs epoxy nanocomposite showed the highest mechanical strength Improved thermal stability of epoxy nanocomposite by modification of hBNNs Improved crack deflection mechanism in the presence of surface‐modified hBNNs Deep learning with ADAM optimizer showed high R2 and low prediction loss
- 10 February 2024
- Published by Wiley in Polymer Composites
- Vol. 45 (7) , 6287-6304
Investigation on enhancement of filler dispersion and prediction of mechanical behavior of hexagonal boron nitride/epoxy nanocomposites through machine learning and deep learning models
Two‐dimensional hexagonal boron nitride (hBN) based nanocomposites exhibit excellent mechanical and thermal properties for various electronics, automotive, and aerospace applications. The present work gives a novel approach to fabricating hexagonal boron nitride/epoxy nanocomposites using isopropanol and dimethyl ketone as dispersants in two different routes and to predict mechanical characteristics employing deep learning and machine learning models. Nanocomposites were fabricated by employing casting techniques with varying concentrations of hBN, spanning from 0.25 to 1 wt%, utilizing dispersing solvents. The nanocomposites were analyzed for mechanical behavior, highlighting a notable improvement in the mechanical properties at 0.5 wt% isopropanol dispersed hBN. It showcased 61% improvement in tensile strength, 38.41% increase in flexural strength, and 35.80% increase in flexural modulus respectively as compared to the pristine epoxy. The Halpin Tsai analytical model showed agreement with the elastic modulus calculated experimentally. The fractured SEM micrograph supported the improved dispersion of the hBN nanocomposite. Thermal stability of 0.5 wt% isopropanol dispersed hBN/epoxy nanocomposite revealed an improvement by 8°C at 50% degradation as compared to the pristine epoxy. Linear regression, random forest regression, support vector regression, and deep neural network (DNN) were employed to predict values. DNN proved better results by showcasing low prediction loss and high R2 values (0.99468–0.99966).Highlights: hBN/epoxy nanocomposite with isopropanol and dimethyl ketone as dispersants. 0.5% hBN loading in isopropanol exhibited improved mechanical characteristics. The Halpin Tsai model was employed for evaluating theoretical elastic modulus. Improved thermal stability and filler dispersion by optimized hBN/epoxy combination. Deep neural network showed higher R2 value and lower prediction loss.
- 10 February 2024
- Published by Wiley in Polymer Composites
- Vol. 45 (7) , 6287-6304
Investigation on enhancement of filler dispersion and prediction of mechanical behavior of hexagonal boron nitride/epoxy nanocomposites through machine learning and deep learning models
Two‐dimensional hexagonal boron nitride (hBN) based nanocomposites exhibit excellent mechanical and thermal properties for various electronics, automotive, and aerospace applications. The present work gives a novel approach to fabricating hexagonal boron nitride/epoxy nanocomposites using isopropanol and dimethyl ketone as dispersants in two different routes and to predict mechanical characteristics employing deep learning and machine learning models. Nanocomposites were fabricated by employing casting techniques with varying concentrations of hBN, spanning from 0.25 to 1 wt%, utilizing dispersing solvents. The nanocomposites were analyzed for mechanical behavior, highlighting a notable improvement in the mechanical properties at 0.5 wt% isopropanol dispersed hBN. It showcased 61% improvement in tensile strength, 38.41% increase in flexural strength, and 35.80% increase in flexural modulus respectively as compared to the pristine epoxy. The Halpin Tsai analytical model showed agreement with the elastic modulus calculated experimentally. The fractured SEM micrograph supported the improved dispersion of the hBN nanocomposite. Thermal stability of 0.5 wt% isopropanol dispersed hBN/epoxy nanocomposite revealed an improvement by 8°C at 50% degradation as compared to the pristine epoxy. Linear regression, random forest regression, support vector regression, and deep neural network (DNN) were employed to predict values. DNN proved better results by showcasing low prediction loss and high R2 values (0.99468–0.99966).Highlights: hBN/epoxy nanocomposite with isopropanol and dimethyl ketone as dispersants. 0.5% hBN loading in isopropanol exhibited improved mechanical characteristics. The Halpin Tsai model was employed for evaluating theoretical elastic modulus. Improved thermal stability and filler dispersion by optimized hBN/epoxy combination. Deep neural network showed higher R2 value and lower prediction loss.