Francisco Carlos Carneiro Soares Salomão
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Francisco Carlos Carneiro Soares Salomão has a total of 82 co-authors. Here are the top co-authors by number of shared publications:
- Walney Silva Araújo
Universidade Federal do Ceará, Brasil
4 shared publications - Caio Victor Pereira Pascoal
Department of Metallurgical and Materials Engineering
3 shared publications - Luís Paulo Mourão dos Santos
Department of Metallurgical and Materials Engineering, Universidade Federal do Ceará, Fortaleza, Brazil
3 shared publications - Eduardo Bede Barros
Federal University of Ceará
2 shared publications - Gemma Fargas
CIEFMA - Department of Materials Science and Engineering, Escola d’Enginyeria de Barcelona Est (EEBE), Universitat Politècnica de Catalunya, Barcelona, Spain
2 shared publications - Hosiberto Batista de Sant’ Ana
Universidade Federal do Ceará Campus do Pici, Bloco 709
2 shared publications
Latest Publications
- Open Access
- 15 June 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (25) , 37560-37569
Nonlinear Nanoscale Electrical Transport Distinguishes Fibroblasts and Osteoblasts
Electrical signaling plays a central role in cellular function, yet direct mapping of electrical transport within individual cells at the nanoscale remains challenging. Conventional electrophysiological and impedance-based techniques either lack sufficient spatial resolution or significantly perturb cellular properties. Here, we employ conductive atomic force microscopy (CAFM) to probe effective local current–voltage (I–V) characteristics with subcellular resolution in fixed and air-dried cells from two mammalian cell types: L929 fibroblasts and OFCOLII osteoblasts cultured on conductive indium tin oxide (ITO) substrates. Spatially resolved current maps reveal a systematically enhanced electrical response in nuclear regions compared to the cytoplasmic periphery in both cell types. L929 fibroblasts exhibit predominantly linear, ohmic-like I–V behavior, whereas OFCOLII osteoblasts display pronounced nonlinear, diode-like electrical transport. Quantitative analysis reveals strong cell-type- and region-dependent variations in effective resistance and capacitance, highlighting the role of intracellular organization in shaping nanoscale electrical behavior. These results establish CAFM as a powerful approach for resolving subcellular electrical heterogeneity and demonstrate that distinct electrical transport signatures can differentiate cellular phenotypes at the single-cell level. These findings position nanoscale electrical transport as a physically grounded marker of cellular phenotype.
- 15 June 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (25) , 37560-37569
Open AccessNonlinear Nanoscale Electrical Transport Distinguishes Fibroblasts and Osteoblasts
Electrical signaling plays a central role in cellular function, yet direct mapping of electrical transport within individual cells at the nanoscale remains challenging. Conventional electrophysiological and impedance-based techniques either lack sufficient spatial resolution or significantly perturb cellular properties. Here, we employ conductive atomic force microscopy (CAFM) to probe effective local current–voltage (I–V) characteristics with subcellular resolution in fixed and air-dried cells from two mammalian cell types: L929 fibroblasts and OFCOLII osteoblasts cultured on conductive indium tin oxide (ITO) substrates. Spatially resolved current maps reveal a systematically enhanced electrical response in nuclear regions compared to the cytoplasmic periphery in both cell types. L929 fibroblasts exhibit predominantly linear, ohmic-like I–V behavior, whereas OFCOLII osteoblasts display pronounced nonlinear, diode-like electrical transport. Quantitative analysis reveals strong cell-type- and region-dependent variations in effective resistance and capacitance, highlighting the role of intracellular organization in shaping nanoscale electrical behavior. These results establish CAFM as a powerful approach for resolving subcellular electrical heterogeneity and demonstrate that distinct electrical transport signatures can differentiate cellular phenotypes at the single-cell level. These findings position nanoscale electrical transport as a physically grounded marker of cellular phenotype.
- Open Access
- 7 May 2026
- Published by Elsevier in SSRN Electronic Journal
Physicochemical characterization of nanoparticles in highly diluted preparations and exploratory plasma proteomic correlates in an N-of-1 study
The physicochemical properties of highly diluted homeopathic preparations remain insufficiently characterized. This study investigated particulate features in Kali carbonicum (K₂CO₃) at 50-millesimal potencies (LM4–LM7), a scale in which each step corresponds to a 1:50,000 dilution. It explored associated plasma proteomic changes in a randomized, placebo-controlled N-of-1 trial. Dynamic light scattering revealed heterogeneous, polydisperse particle populations with low zeta potentials, while scanning electron microscopy identified nanoparticles (~67 nm) in LM4. Atomic force microscopy showed that Kali samples exhibited more compact dendritic assemblies than lactose controls, suggesting that initial trituration influences self-organization. Raman spectroscopy of LM7 detected carbonate-associated bands absent in controls. Plasma proteomics revealed an exploratory signature during Kali exposure, including increased S100A9 abundance, enrichment of immune-related pathways, and reduced exosome-associated proteins. These findings suggest that structured nanometric assemblies may be associated with measurable systemic changes.
- 7 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessPhysicochemical characterization of nanoparticles in highly diluted preparations and exploratory plasma proteomic correlates in an N-of-1 study
The physicochemical properties of highly diluted homeopathic preparations remain insufficiently characterized. This study investigated particulate features in Kali carbonicum (K₂CO₃) at 50-millesimal potencies (LM4–LM7), a scale in which each step corresponds to a 1:50,000 dilution. It explored associated plasma proteomic changes in a randomized, placebo-controlled N-of-1 trial. Dynamic light scattering revealed heterogeneous, polydisperse particle populations with low zeta potentials, while scanning electron microscopy identified nanoparticles (~67 nm) in LM4. Atomic force microscopy showed that Kali samples exhibited more compact dendritic assemblies than lactose controls, suggesting that initial trituration influences self-organization. Raman spectroscopy of LM7 detected carbonate-associated bands absent in controls. Plasma proteomics revealed an exploratory signature during Kali exposure, including increased S100A9 abundance, enrichment of immune-related pathways, and reduced exosome-associated proteins. These findings suggest that structured nanometric assemblies may be associated with measurable systemic changes.
- Open Access
- 17 March 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (12) , 19482-19496
Ultrasound-Assisted Processing of Amorphous Hydrated Carbon Oxide from Plant Origin: Properties and Biocompatibility of Conductive Nanocomposites as a Proposal for Food Packaging
The sustainable production of conductive carbon nanomaterials for food-packaging applications remains limited by dispersion instability and safety concerns. Herein, we investigate the ultrasound-assisted processing of plant-derived hydrated amorphous carbon oxide (HACO) to obtain stable, conductive, and biocompatible nanostructured dispersions. Ultrasonic cavitation was applied in a hydroalcoholic medium, and a full 23 factorial design was used to evaluate the effects of sonication amplitude and time on particle size, polydispersity index (PDI), and zeta potential, together with acoustic parameters. Optimized conditions produced dispersions with particle sizes below 150 nm and PDI D/I G = 0.87), while atomic force microscopy (AFM) and FEG-SEM revealed nanostructured aggregates. Cyclic voltammetry showed peak currents above 30 μA and ΔE p values between 70.8 and 95.2 mV, indicating good electrical conductivity. Although no acute toxicity or mortality was observed in adult zebrafish after 96 h of exposure, the highest concentrations of HSACO (3.0%, v/v) and the pure material induced sublethal behavioral changes. The novelty of this work lies in the combination of renewable, plant-based amorphous carbon oxide and controlled ultrasonic cavitation to produce safe and conductive nanostructures, highlighting HACO as a promising sustainable filler for smart food-packaging nanocomposites.
- 17 March 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (12) , 19482-19496
Open AccessUltrasound-Assisted Processing of Amorphous Hydrated Carbon Oxide from Plant Origin: Properties and Biocompatibility of Conductive Nanocomposites as a Proposal for Food Packaging
The sustainable production of conductive carbon nanomaterials for food-packaging applications remains limited by dispersion instability and safety concerns. Herein, we investigate the ultrasound-assisted processing of plant-derived hydrated amorphous carbon oxide (HACO) to obtain stable, conductive, and biocompatible nanostructured dispersions. Ultrasonic cavitation was applied in a hydroalcoholic medium, and a full 23 factorial design was used to evaluate the effects of sonication amplitude and time on particle size, polydispersity index (PDI), and zeta potential, together with acoustic parameters. Optimized conditions produced dispersions with particle sizes below 150 nm and PDI D/I G = 0.87), while atomic force microscopy (AFM) and FEG-SEM revealed nanostructured aggregates. Cyclic voltammetry showed peak currents above 30 μA and ΔE p values between 70.8 and 95.2 mV, indicating good electrical conductivity. Although no acute toxicity or mortality was observed in adult zebrafish after 96 h of exposure, the highest concentrations of HSACO (3.0%, v/v) and the pure material induced sublethal behavioral changes. The novelty of this work lies in the combination of renewable, plant-based amorphous carbon oxide and controlled ultrasonic cavitation to produce safe and conductive nanostructures, highlighting HACO as a promising sustainable filler for smart food-packaging nanocomposites.
- Open Access
- 21 January 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (4) , 3417-3443
Understanding the Role of Diethanolamine-Based Protic Ionic Liquids in Corrosion Inhibition: Electrochemical and Surface Characterization of Carbon Steel in Saline Environments
This study presents an evaluation of the corrosion inhibition behavior of three protic ionic liquids (PILs), 2-hydroxy diethanolamine formate (PIL A: 2-HDEAF), 2-hydroxy diethanolamine propionate (PIL B: 2-HDEAP), and 2-hydroxy diethanolamine pentanoate (PIL C: 2-HDEAPe), on A36 carbon steel in a chloride electrolyte (3.5 wt % NaCl). The emphasis was converged on elucidating interfacial adsorption, film formation, and surface chemistry that reinforce inhibitor efficacy. A complementary set of electrochemical and surface techniques, including weight loss measurements, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), optical microscopy, field-emission scanning electron microscopy (FE-SEM), and atomic force microscopy (AFM), was employed to evaluate the electrochemical response and characterize the inhibitor-modified steel surfaces. X-ray diffraction (XRD) was used to perform an identification of the main phases of corrosion products and adsorbed films. The adsorption behavior was quantitatively evaluated using several adsorption isotherm models, including Langmuir, Temkin, and Freundlich. Among them, the Frumkin isotherm provided the best description of the experimental data, yielding an average standard free energy of adsorption (ΔG°ad) of -20.89 kJ mol-1, which is indicative of predominantly physical adsorption at the steel/electrolyte interface. Among the PILs studied, PIL A exhibited the highest inhibition efficiency (>75%) and promoted the formation of a dense, protective interfacial film, whereas PILs B and C showed progressively lower performance. Inhibition efficiency correlated positively with inhibitor concentration and followed the trend PIL A > PIL B > PIL C. Surface morphologies demonstrated significant mitigation of chloride damage in the presence of PILs, consistent with electrochemical results. XRD analysis revealed the stabilization of surface films (iron oxides and oxyhydroxides), including goethite, which are indicative of altered interfacial reactions in the inhibited systems. These results accentuate the importance of interfacial adsorption evaluation and film formation mechanisms in governing corrosion inhibition performance, highlighting the potential of tailored PILs for surface protection in chloride-containing media.
- 21 January 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (4) , 3417-3443
Open AccessUnderstanding the Role of Diethanolamine-Based Protic Ionic Liquids in Corrosion Inhibition: Electrochemical and Surface Characterization of Carbon Steel in Saline Environments
This study presents an evaluation of the corrosion inhibition behavior of three protic ionic liquids (PILs), 2-hydroxy diethanolamine formate (PIL A: 2-HDEAF), 2-hydroxy diethanolamine propionate (PIL B: 2-HDEAP), and 2-hydroxy diethanolamine pentanoate (PIL C: 2-HDEAPe), on A36 carbon steel in a chloride electrolyte (3.5 wt % NaCl). The emphasis was converged on elucidating interfacial adsorption, film formation, and surface chemistry that reinforce inhibitor efficacy. A complementary set of electrochemical and surface techniques, including weight loss measurements, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), optical microscopy, field-emission scanning electron microscopy (FE-SEM), and atomic force microscopy (AFM), was employed to evaluate the electrochemical response and characterize the inhibitor-modified steel surfaces. X-ray diffraction (XRD) was used to perform an identification of the main phases of corrosion products and adsorbed films. The adsorption behavior was quantitatively evaluated using several adsorption isotherm models, including Langmuir, Temkin, and Freundlich. Among them, the Frumkin isotherm provided the best description of the experimental data, yielding an average standard free energy of adsorption (ΔG°ad) of -20.89 kJ mol-1, which is indicative of predominantly physical adsorption at the steel/electrolyte interface. Among the PILs studied, PIL A exhibited the highest inhibition efficiency (>75%) and promoted the formation of a dense, protective interfacial film, whereas PILs B and C showed progressively lower performance. Inhibition efficiency correlated positively with inhibitor concentration and followed the trend PIL A > PIL B > PIL C. Surface morphologies demonstrated significant mitigation of chloride damage in the presence of PILs, consistent with electrochemical results. XRD analysis revealed the stabilization of surface films (iron oxides and oxyhydroxides), including goethite, which are indicative of altered interfacial reactions in the inhibited systems. These results accentuate the importance of interfacial adsorption evaluation and film formation mechanisms in governing corrosion inhibition performance, highlighting the potential of tailored PILs for surface protection in chloride-containing media.
- 23 August 2025
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 54 (12) , 11768-11777
Photoluminescence Suppression in P3HT:PCBM Films Induced by Spinel Ferrite Nanoparticles Decoration
- 23 August 2025
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 54 (12) , 11768-11777
Photoluminescence Suppression in P3HT:PCBM Films Induced by Spinel Ferrite Nanoparticles Decoration
- Open Access
Assessment of Sustainable Ethanolamine-Based Protic Ionic Liquids with Varied Carboxylic Acid Chains as Corrosion Inhibitors for Carbon Steel in Saline Environments
The inhibitory performance of three distinct protic ionic liquids (PILs), namely, 2-hydroxyethyl ammonium formate (PIL 01), 2-hydroxyethyl ammonium propionate (PIL 02), and 2-hydroxyethyl ammonium pentanoate (PIL 03), was evaluated to determine their suitability as eco-friendly corrosion inhibitors for carbon steel (ASTM A36) in a 3.5 wt. % NaCl aerated neutral electrolyte solution. Standard corrosion inhibitor assessment methods, including electrochemical impedance spectroscopy (EIS), potentiodynamic polarization (PDP), weight loss measurements, and microscopic techniques (SEM and optical microscopy), were employed to examine the steel surface and corrosion rate. There is a general agreement that the inhibition efficacy is directly associated with the adsorption capacity of substances on the surface of an investigated material, normally stainless or carbon steel. The standard free energies of adsorption were approximately −22 kJ mol−1, indicating a physical adsorption type of interaction between ionic liquids and the electrode surface. The adsorption behavior of protic ionic liquids on an A36 steel surface conforms to a Langmuir-type isotherm. In conclusion, PIL 01 demonstrated an inhibition efficiency exceeding 80%, while PILs 02 and 03 exhibited efficacies in the 50–60% range. The inhibition efficiency was observed to be proportional to the inhibitor’s concentration. These results suggest that PIL 01, PIL 02, and PIL 03 exhibit significant corrosion inhibition properties.
Open AccessAssessment of Sustainable Ethanolamine-Based Protic Ionic Liquids with Varied Carboxylic Acid Chains as Corrosion Inhibitors for Carbon Steel in Saline Environments
The inhibitory performance of three distinct protic ionic liquids (PILs), namely, 2-hydroxyethyl ammonium formate (PIL 01), 2-hydroxyethyl ammonium propionate (PIL 02), and 2-hydroxyethyl ammonium pentanoate (PIL 03), was evaluated to determine their suitability as eco-friendly corrosion inhibitors for carbon steel (ASTM A36) in a 3.5 wt. % NaCl aerated neutral electrolyte solution. Standard corrosion inhibitor assessment methods, including electrochemical impedance spectroscopy (EIS), potentiodynamic polarization (PDP), weight loss measurements, and microscopic techniques (SEM and optical microscopy), were employed to examine the steel surface and corrosion rate. There is a general agreement that the inhibition efficacy is directly associated with the adsorption capacity of substances on the surface of an investigated material, normally stainless or carbon steel. The standard free energies of adsorption were approximately −22 kJ mol−1, indicating a physical adsorption type of interaction between ionic liquids and the electrode surface. The adsorption behavior of protic ionic liquids on an A36 steel surface conforms to a Langmuir-type isotherm. In conclusion, PIL 01 demonstrated an inhibition efficiency exceeding 80%, while PILs 02 and 03 exhibited efficacies in the 50–60% range. The inhibition efficiency was observed to be proportional to the inhibitor’s concentration. These results suggest that PIL 01, PIL 02, and PIL 03 exhibit significant corrosion inhibition properties.
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 28 (suppl 1) , e20250154
Ohmic-to-Schottky Modification of Zno-Metal Contact Modulated by Film Thickness
This work investigated the charge transport behavior at the interface between a Pt-Ir metal contact and transparent zinc oxide (ZnO) electrodes with one, four, and eight ZnO layers. Electrostatic force microscopy (EFM), Kelvin probe force microscopy (KPFM), and conducting atomic force microscopy (c-AFM) techniques were employed to explore the nanoscale surface electrical properties. The variation in thickness led to changes in the type of contact formed between metal and semiconductor, which went from ohmic to rectifier with the increase in the number of layers. The modulation in the type of contact formed was mainly due to the presence of grain boundaries (GB) during film formation. The influence of the thickness synthesis parameter on the optoelectronic and charge transport properties of conductive and transparent ZnO electrodes is demonstrated, and its importance in the formation of metal- semiconductor (M-S) contacts that make zinc oxide a versatile semiconductor.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 28 (suppl 1) , e20250154
Open AccessOhmic-to-Schottky Modification of Zno-Metal Contact Modulated by Film Thickness
This work investigated the charge transport behavior at the interface between a Pt-Ir metal contact and transparent zinc oxide (ZnO) electrodes with one, four, and eight ZnO layers. Electrostatic force microscopy (EFM), Kelvin probe force microscopy (KPFM), and conducting atomic force microscopy (c-AFM) techniques were employed to explore the nanoscale surface electrical properties. The variation in thickness led to changes in the type of contact formed between metal and semiconductor, which went from ohmic to rectifier with the increase in the number of layers. The modulation in the type of contact formed was mainly due to the presence of grain boundaries (GB) during film formation. The influence of the thickness synthesis parameter on the optoelectronic and charge transport properties of conductive and transparent ZnO electrodes is demonstrated, and its importance in the formation of metal- semiconductor (M-S) contacts that make zinc oxide a versatile semiconductor.
- Open Access
Assessment of the Amino Acid L-Histidine as a Corrosion Inhibitor for a 1018 Carbon Steel in Aqueous Sodium Chloride Solution
The amino acid L-histidine, which has an imidazole ring, was investigated as a corrosion inhibitor for AISI 1018 carbon steel in chloride solution based on the effectiveness of inhibitors containing imidazole in their composition. A neutral environment was chosen for this study due to the scarcity of research on this amino acid in this environment type. Concentrations of 250, 500, and 1000 ppm were evaluated. Various methods were used to determine inhibition effectiveness, including mass loss, open circuit potential, linear potentiodynamic polarization, and electrochemical impedance spectroscopy. For mass loss, the inhibition efficiency varied from 83 to 88% according to the increase in concentration. For the electrochemical tests, the efficiency variation ranged from 62 to 90% with increasing amino acid concentration. Furthermore, a simulation analysis using quantum chemical calculations within the scope of Density Functional Theory (DFT) revealed that histidine’s nucleophilic character is crucial for its corrosion inhibitory capacity in an aqueous medium at pH 7. The inhibition efficiency increased with increasing concentration in a neutral medium, following the Langmuir isotherm for the adsorption of L-histidine. Additional studies were carried out using Fourier transform infrared spectroscopy (FTIR) and thermogravimetry (TGA). Analysis of the substrate surface by scanning electron microscopy (SEM) showed greater preservation with the addition of L-histidine, confirming its adsorption on the steel. Atomic Force Microscopy (AFM) also demonstrated an improvement in surface roughness in the presence of amino acids compared to the medium without an inhibitor.
Open AccessAssessment of the Amino Acid L-Histidine as a Corrosion Inhibitor for a 1018 Carbon Steel in Aqueous Sodium Chloride Solution
The amino acid L-histidine, which has an imidazole ring, was investigated as a corrosion inhibitor for AISI 1018 carbon steel in chloride solution based on the effectiveness of inhibitors containing imidazole in their composition. A neutral environment was chosen for this study due to the scarcity of research on this amino acid in this environment type. Concentrations of 250, 500, and 1000 ppm were evaluated. Various methods were used to determine inhibition effectiveness, including mass loss, open circuit potential, linear potentiodynamic polarization, and electrochemical impedance spectroscopy. For mass loss, the inhibition efficiency varied from 83 to 88% according to the increase in concentration. For the electrochemical tests, the efficiency variation ranged from 62 to 90% with increasing amino acid concentration. Furthermore, a simulation analysis using quantum chemical calculations within the scope of Density Functional Theory (DFT) revealed that histidine’s nucleophilic character is crucial for its corrosion inhibitory capacity in an aqueous medium at pH 7. The inhibition efficiency increased with increasing concentration in a neutral medium, following the Langmuir isotherm for the adsorption of L-histidine. Additional studies were carried out using Fourier transform infrared spectroscopy (FTIR) and thermogravimetry (TGA). Analysis of the substrate surface by scanning electron microscopy (SEM) showed greater preservation with the addition of L-histidine, confirming its adsorption on the steel. Atomic Force Microscopy (AFM) also demonstrated an improvement in surface roughness in the presence of amino acids compared to the medium without an inhibitor.
- 29 January 2024
- Published by Elsevier in Surfaces and Interfaces
- Vol. 46
Modified bacterial nanofibril for application in superhydrophobic coating of food packaging
- 29 January 2024
- Published by Elsevier in Surfaces and Interfaces
- Vol. 46
Modified bacterial nanofibril for application in superhydrophobic coating of food packaging
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 27 (suppl 1) , e20240135
Study of the Efficiency of the Amino Acid L-Histidine as a Corrosion Inhibitor of 1018 Carbon Steel in Saline Solution Without and with CO2 Saturation
L-histidine was analyzed in this work as a corrosion inhibitor for AISI 1018 carbon steel in chloride solution, without (pH 7) and with carbon dioxide saturation (pH 4). Mass loss methods and electrochemical tests were used. In a medium with pH 4 saturated with CO2, the inhibition efficiency values (IE%) did not reach 34%. For the pH 7 condition, an inhibition efficiency of up to 89% was observed. The values corroborated with the quantum chemistry and Density Functional Theory (DFT) calculations, showing that the histidine molecule is responsible for the excellent inhibition potential. A Fourier transform infrared spectroscopy (FTIR) study and a thermogravimetric study (TGA) of the amino acid were also carried out. The substrate surface was analyzed by scanning electron microscopy and atomic force microscopy.
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 27 (suppl 1) , e20240135
Open AccessStudy of the Efficiency of the Amino Acid L-Histidine as a Corrosion Inhibitor of 1018 Carbon Steel in Saline Solution Without and with CO2 Saturation
L-histidine was analyzed in this work as a corrosion inhibitor for AISI 1018 carbon steel in chloride solution, without (pH 7) and with carbon dioxide saturation (pH 4). Mass loss methods and electrochemical tests were used. In a medium with pH 4 saturated with CO2, the inhibition efficiency values (IE%) did not reach 34%. For the pH 7 condition, an inhibition efficiency of up to 89% was observed. The values corroborated with the quantum chemistry and Density Functional Theory (DFT) calculations, showing that the histidine molecule is responsible for the excellent inhibition potential. A Fourier transform infrared spectroscopy (FTIR) study and a thermogravimetric study (TGA) of the amino acid were also carried out. The substrate surface was analyzed by scanning electron microscopy and atomic force microscopy.