Kristian Witthaut
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kristian Witthaut has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Wolfgang Schnick
Department of Chemistry University of Munich (LMU) Munich Germany
16 shared publications Reinhard M. Pritzl
Department of Chemistry University of Munich (LMU) Munich Germany
6 shared publications- Thomas Bräuniger
Department of Chemistry, University of Munich (LMU), Butenandtstr. 5-13, 81377 Munich, Germany
6 shared publications - Lkhamsuren Bayarjargal
Institute of Geosciences Altenhöferallee 1
4 shared publications - Marwin Dialer
Department of Chemistry University of Munich (LMU) Butenandtstraße 5–13 81377 Munich Germany
4 shared publications - Peter J. Schmidt
Lumileds Phosphor Center Aachen (LPCA) Lumileds (Germany) GmbH Philipsstraße 8 52068 Aachen Germany
4 shared publications
Latest Publications
- Open Access
Assigning Single-Crystal NMR Data to Crystallographic Sites for Symmetry-Affected Interaction Tensors: A Case Study of Sinhalite, MgAlBO4, by 11B and 27Al NMR Spectroscopy and DFT Calculations
The natural mineral sinhalite, MgAlBO, was investigated by means of single-crystal NMR spectroscopy. In its orthorhombic space group, the aluminium and boron atoms occupy Wyckoff positions and , but the specific site symmetry of the boron atoms situated on a mirror plane leads two only two instead of four magnetically inequivalent atoms per site. This structural feature also restricts the corresponding NMR interaction tensors and reduces known assignment ambiguities regarding the NMR resonances of Al and B to distinct atomic positions. Comparing the experimentally determined eigenvectors of the quadrupolar coupling tensors with the results of DFT calculations for the electric field gradients further condensed the remaining options and delivered the full quadrupolar coupling tensors for both nuclides in the crystal structure of sinhalite.Open AccessAssigning Single-Crystal NMR Data to Crystallographic Sites for Symmetry-Affected Interaction Tensors: A Case Study of Sinhalite, MgAlBO4, by 11B and 27Al NMR Spectroscopy and DFT Calculations
The natural mineral sinhalite, MgAlBO, was investigated by means of single-crystal NMR spectroscopy. In its orthorhombic space group, the aluminium and boron atoms occupy Wyckoff positions and , but the specific site symmetry of the boron atoms situated on a mirror plane leads two only two instead of four magnetically inequivalent atoms per site. This structural feature also restricts the corresponding NMR interaction tensors and reduces known assignment ambiguities regarding the NMR resonances of Al and B to distinct atomic positions. Comparing the experimentally determined eigenvectors of the quadrupolar coupling tensors with the results of DFT calculations for the electric field gradients further condensed the remaining options and delivered the full quadrupolar coupling tensors for both nuclides in the crystal structure of sinhalite. - Open Access
- 31 December 2025
- Published by Wiley in Chemistry – A European Journal
- Vol. 32 (9) , e03587
Resolving a Nearly Two‐Centuries‐Old Mystery: On the Structural Chemistry and Physicochemical Properties of Compounds Associated With the Term Ammelide
Ammelide, also known as melanuric acid, is a simple molecular compound, which can be regarded as the double hydrolysis product of the industrially relevant compound melamine. Within this work, the first structural description of ammelide was provided almost 200 years after its discovery. This not only gave the first unambiguous evidence that ammelide's preferred tautomeric form in the solid is 6‐amino‐1,3,5‐triazine‐2,4(1 H ,3 H )‐dione, but also showed that ammelide adopts a layered structure similar to the closely related ammeline. Moreover, the crystal structures of three modifications of the 1:1 adduct between ammeline and ammelide were elucidated, which form layers with a honeycomb motif and hexagonal voids analogous to melamine cyanurate. Differential thermal analysis and thermogravimetric analysis demonstrated that both pure ammelide and its adduct with ammeline have exceptionally high thermal stabilities, resulting from their dense hydrogen bonding networks. Finally, the synthesis and structural characterization of the ammelide's nitrate and perchlorate salts were carried out to examine the potential of ammelide as part of insensitive high‐energy‐density materials through sensitivity measurements and theoretical calculations.
- 31 December 2025
- Published by Wiley in Chemistry – A European Journal
- Vol. 32 (9) , e03587
Open AccessResolving a Nearly Two‐Centuries‐Old Mystery: On the Structural Chemistry and Physicochemical Properties of Compounds Associated With the Term Ammelide
Ammelide, also known as melanuric acid, is a simple molecular compound, which can be regarded as the double hydrolysis product of the industrially relevant compound melamine. Within this work, the first structural description of ammelide was provided almost 200 years after its discovery. This not only gave the first unambiguous evidence that ammelide's preferred tautomeric form in the solid is 6‐amino‐1,3,5‐triazine‐2,4(1 H ,3 H )‐dione, but also showed that ammelide adopts a layered structure similar to the closely related ammeline. Moreover, the crystal structures of three modifications of the 1:1 adduct between ammeline and ammelide were elucidated, which form layers with a honeycomb motif and hexagonal voids analogous to melamine cyanurate. Differential thermal analysis and thermogravimetric analysis demonstrated that both pure ammelide and its adduct with ammeline have exceptionally high thermal stabilities, resulting from their dense hydrogen bonding networks. Finally, the synthesis and structural characterization of the ammelide's nitrate and perchlorate salts were carried out to examine the potential of ammelide as part of insensitive high‐energy‐density materials through sensitivity measurements and theoretical calculations.
- Open Access
- 18 February 2025
- Published by Wiley in Chemistry – A European Journal
- Vol. 31 (19) , e202500271
Pyrrolation of Melem: A Facile Gateway into the Field of Monomeric s‐Heptazine Chemistry
Monomeric s‐heptazines are an intriguing class of compounds with many attractive properties for various areas of application such as photocatalysis or organic light‐emitting diodes. However, research into these properties has so far been challenging, as only a few synthetic routes for the preparation of monomeric s‐heptazines are known in the literature. Furthermore, these few reported synthetic pathways generally require the use of specialized equipment that may not be available to all laboratories interested in studying monomeric s‐heptazines. For this reason, a more accessible synthetic route for the preparation of monomeric s‐heptazines has been developed in the course of this work. The central compound of this new approach is 2,5,8‐tri(1H‐pyrrol‐1‐yl)‐s‐heptazine, which could be conveniently synthesized via an acid catalyzed pyrrolation of melem with bench‐stable 2,5‐dimethoxytetrahydrofuran in a simple one‐pot synthesis in air. This compound was shown to be a potent starting material for the synthesis of numerous other monomeric s‐heptazines by reaction with both nucleophiles and electrophiles. The monomeric s‐heptazines thus accessible were analyzed for their crystal structures by single crystal X‐ray diffraction and for their optical properties by ultraviolet/visible and photoluminescence spectroscopy.
- 18 February 2025
- Published by Wiley in Chemistry – A European Journal
- Vol. 31 (19) , e202500271
Open AccessPyrrolation of Melem: A Facile Gateway into the Field of Monomeric s‐Heptazine Chemistry
Monomeric s‐heptazines are an intriguing class of compounds with many attractive properties for various areas of application such as photocatalysis or organic light‐emitting diodes. However, research into these properties has so far been challenging, as only a few synthetic routes for the preparation of monomeric s‐heptazines are known in the literature. Furthermore, these few reported synthetic pathways generally require the use of specialized equipment that may not be available to all laboratories interested in studying monomeric s‐heptazines. For this reason, a more accessible synthetic route for the preparation of monomeric s‐heptazines has been developed in the course of this work. The central compound of this new approach is 2,5,8‐tri(1H‐pyrrol‐1‐yl)‐s‐heptazine, which could be conveniently synthesized via an acid catalyzed pyrrolation of melem with bench‐stable 2,5‐dimethoxytetrahydrofuran in a simple one‐pot synthesis in air. This compound was shown to be a potent starting material for the synthesis of numerous other monomeric s‐heptazines by reaction with both nucleophiles and electrophiles. The monomeric s‐heptazines thus accessible were analyzed for their crystal structures by single crystal X‐ray diffraction and for their optical properties by ultraviolet/visible and photoluminescence spectroscopy.
- Open Access
- 6 November 2024
- Published by Wiley in Chemistry – A European Journal
- Vol. 30 (71) , e202402743
Ammonothermal Synthesis of Luminescent Imidonitridophosphate Ba4P4N8(NH)2:Eu2+
The structural variability of a compound class is an important criterion for the research into phosphor host lattices for phosphor‐converted light‐emitting diodes (pc‐LEDs). Especially, nitridophosphates and the related class of imidonitridophosphates are promising candidates. Recently, the ammonothermal approach has opened a systematic access to this substance class with larger sample quantities. We present the successful ammonothermal synthesis of the imidonitridophosphate Ba4P4N8(NH)2:Eu2+. Its crystal structure is solved by X‐ray diffraction and it crystallizes in space group Cc (no. 9) with lattice parameters a=12.5250(3), b=12.5566(4), c=7.3882(2) Å and β=102.9793(10)°. For the first time, adamantane‐type (imido)nitridophosphate anions [P4N8(NH)2]8− are observed next to metal ions other than alkali metals in a compound. The presence of imide groups in the structure and the identification of preferred positions for the hydrogen atoms are performed using a combination of quantum chemical calculations, Fourier‐transform infrared, and solid‐state NMR spectroscopy. Eu2+ doped samples exhibit cyan emission (λmax=498 nm, fwhm=50 nm/1981 cm−1) when excited with ultraviolet light with an impressive internal quantum efficiency (IQE) of 41 %, which represents the first benchmark for imidonitridophosphates and is promising for potential industrial application of this compound class.
- 6 November 2024
- Published by Wiley in Chemistry – A European Journal
- Vol. 30 (71) , e202402743
Open AccessAmmonothermal Synthesis of Luminescent Imidonitridophosphate Ba4P4N8(NH)2:Eu2+
The structural variability of a compound class is an important criterion for the research into phosphor host lattices for phosphor‐converted light‐emitting diodes (pc‐LEDs). Especially, nitridophosphates and the related class of imidonitridophosphates are promising candidates. Recently, the ammonothermal approach has opened a systematic access to this substance class with larger sample quantities. We present the successful ammonothermal synthesis of the imidonitridophosphate Ba4P4N8(NH)2:Eu2+. Its crystal structure is solved by X‐ray diffraction and it crystallizes in space group Cc (no. 9) with lattice parameters a=12.5250(3), b=12.5566(4), c=7.3882(2) Å and β=102.9793(10)°. For the first time, adamantane‐type (imido)nitridophosphate anions [P4N8(NH)2]8− are observed next to metal ions other than alkali metals in a compound. The presence of imide groups in the structure and the identification of preferred positions for the hydrogen atoms are performed using a combination of quantum chemical calculations, Fourier‐transform infrared, and solid‐state NMR spectroscopy. Eu2+ doped samples exhibit cyan emission (λmax=498 nm, fwhm=50 nm/1981 cm−1) when excited with ultraviolet light with an impressive internal quantum efficiency (IQE) of 41 %, which represents the first benchmark for imidonitridophosphates and is promising for potential industrial application of this compound class.
- Open Access
- 12 September 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (45)
P1−xTa8+xN13 (x=0.1–0.15): A Phosphorus Tantalum Nitride Featuring Mixed‐Valent Tantalum and P/Ta Disorder Visualized by Scanning Transmission Electron Microscopy
We report on the synthesis, crystal, and electronic structure, as well as the magnetic, and electric properties of the phosphorus‐containing tantalum nitride P1−xTa8+xN13 (x=0.1–0.15). A high‐pressure high‐temperature reaction (8 GPa, 1400 °C) of Ta3N5 and P3N5 with NH4F as a mineralizing agent yields the compound in the form of black, rod‐shaped crystals. Single‐crystal X‐ray structure elucidation (space group C2/m (no. 12), a=16.202(3), b=2.9155(4), c=11.089(2) Å, β=126.698(7)°, Z=2) shows a network of face‐ and edge‐sharing Ta‐centered polyhedra that contains small vacant channels and PN6 octahedra strands. Atomic resolution transmission electron microscopy reveals an unusual P/Ta disorder. Mixed‐valent tantalum atoms exhibit interatomic distances similar to those in metallic tantalum, however, the electrical resistivity is quite high in the order of 101 Ω cm. The density of states and the electron localization function indicate localized electrons in both covalent and ionic bonds between P/Ta and N atoms, combined with less localized electrons that do not contribute to interatomic bonds.
- 12 September 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (45)
Open AccessP1−xTa8+xN13 (x=0.1–0.15): A Phosphorus Tantalum Nitride Featuring Mixed‐Valent Tantalum and P/Ta Disorder Visualized by Scanning Transmission Electron Microscopy
We report on the synthesis, crystal, and electronic structure, as well as the magnetic, and electric properties of the phosphorus‐containing tantalum nitride P1−xTa8+xN13 (x=0.1–0.15). A high‐pressure high‐temperature reaction (8 GPa, 1400 °C) of Ta3N5 and P3N5 with NH4F as a mineralizing agent yields the compound in the form of black, rod‐shaped crystals. Single‐crystal X‐ray structure elucidation (space group C2/m (no. 12), a=16.202(3), b=2.9155(4), c=11.089(2) Å, β=126.698(7)°, Z=2) shows a network of face‐ and edge‐sharing Ta‐centered polyhedra that contains small vacant channels and PN6 octahedra strands. Atomic resolution transmission electron microscopy reveals an unusual P/Ta disorder. Mixed‐valent tantalum atoms exhibit interatomic distances similar to those in metallic tantalum, however, the electrical resistivity is quite high in the order of 101 Ω cm. The density of states and the electron localization function indicate localized electrons in both covalent and ionic bonds between P/Ta and N atoms, combined with less localized electrons that do not contribute to interatomic bonds.
- Open Access
- 12 September 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 63 (45) , e202411441
P1−xTa8+xN13 (x=0.1–0.15): A Phosphorus Tantalum Nitride Featuring Mixed‐Valent Tantalum and P/Ta Disorder Visualized by Scanning Transmission Electron Microscopy
We report on the synthesis, crystal, and electronic structure, as well as the magnetic, and electric properties of the phosphorus‐containing tantalum nitride P1−xTa8+xN13 (x=0.1–0.15). A high‐pressure high‐temperature reaction (8 GPa, 1400 °C) of Ta3N5 and P3N5 with NH4F as a mineralizing agent yields the compound in the form of black, rod‐shaped crystals. Single‐crystal X‐ray structure elucidation (space group C2/m (no. 12), a=16.202(3), b=2.9155(4), c=11.089(2) Å, β=126.698(7)°, Z=2) shows a network of face‐ and edge‐sharing Ta‐centered polyhedra that contains small vacant channels and PN6 octahedra strands. Atomic resolution transmission electron microscopy reveals an unusual P/Ta disorder. Mixed‐valent tantalum atoms exhibit interatomic distances similar to those in metallic tantalum, however, the electrical resistivity is quite high in the order of 101 Ω cm. The density of states and the electron localization function indicate localized electrons in both covalent and ionic bonds between P/Ta and N atoms, combined with less localized electrons that do not contribute to interatomic bonds.
- 12 September 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 63 (45) , e202411441
Open AccessP1−xTa8+xN13 (x=0.1–0.15): A Phosphorus Tantalum Nitride Featuring Mixed‐Valent Tantalum and P/Ta Disorder Visualized by Scanning Transmission Electron Microscopy
We report on the synthesis, crystal, and electronic structure, as well as the magnetic, and electric properties of the phosphorus‐containing tantalum nitride P1−xTa8+xN13 (x=0.1–0.15). A high‐pressure high‐temperature reaction (8 GPa, 1400 °C) of Ta3N5 and P3N5 with NH4F as a mineralizing agent yields the compound in the form of black, rod‐shaped crystals. Single‐crystal X‐ray structure elucidation (space group C2/m (no. 12), a=16.202(3), b=2.9155(4), c=11.089(2) Å, β=126.698(7)°, Z=2) shows a network of face‐ and edge‐sharing Ta‐centered polyhedra that contains small vacant channels and PN6 octahedra strands. Atomic resolution transmission electron microscopy reveals an unusual P/Ta disorder. Mixed‐valent tantalum atoms exhibit interatomic distances similar to those in metallic tantalum, however, the electrical resistivity is quite high in the order of 101 Ω cm. The density of states and the electron localization function indicate localized electrons in both covalent and ionic bonds between P/Ta and N atoms, combined with less localized electrons that do not contribute to interatomic bonds.
- Open Access
- 9 September 2024
- Published by Wiley in Chemistry – A European Journal
- Vol. 30 (52) , e202402521
CaLi2PN3 – A Quaternary Chain‐Type Nitridophosphate by Medium‐Pressure Synthesis
Nitridophosphates are in the focus of current research interest due to their structural versatility and properties, such as ion conductivity, ultra‐incompressibility and luminescent properties when doped with suitable activator ions. Multinary representatives often require thorough investigation due to the competition with the thermodynamically more stable binary and ternary compounds. Another point of concern is the synthetic control of structural details, which is usually limited by conventional bottom‐up syntheses. In this study, we report on the synthesis and characterization of the quaternary nitridophosphate CaLi2PN3. Various synthesis protocols were used for the preparation of CaLi2PN3, including the novel nitridophosphate double salt approach. The crystal structure was solved and refined from single‐crystal X‐ray diffraction data and confirmed by Rietveld refinement, solid‐state NMR spectroscopy, EDX measurements and low‐cost crystallographic calculations. The experimental results were corroborated by DFT calculations, which revealed the electronic band structure. Formation energy calculations allowed conclusions to be drawn about the stability in comparison to the initial ternary nitridophosphates. The synthesis of CaLi2PN3 exemplifies the enormous potential of medium‐pressure syntheses in the field of nitridophosphate research. Furthermore, the presented new synthesis route allows a certain degree of structural control, which is a promising addition to previous synthesis strategies in nitridophosphate chemistry.
- 9 September 2024
- Published by Wiley in Chemistry – A European Journal
- Vol. 30 (52) , e202402521
Open AccessCaLi2PN3 – A Quaternary Chain‐Type Nitridophosphate by Medium‐Pressure Synthesis
Nitridophosphates are in the focus of current research interest due to their structural versatility and properties, such as ion conductivity, ultra‐incompressibility and luminescent properties when doped with suitable activator ions. Multinary representatives often require thorough investigation due to the competition with the thermodynamically more stable binary and ternary compounds. Another point of concern is the synthetic control of structural details, which is usually limited by conventional bottom‐up syntheses. In this study, we report on the synthesis and characterization of the quaternary nitridophosphate CaLi2PN3. Various synthesis protocols were used for the preparation of CaLi2PN3, including the novel nitridophosphate double salt approach. The crystal structure was solved and refined from single‐crystal X‐ray diffraction data and confirmed by Rietveld refinement, solid‐state NMR spectroscopy, EDX measurements and low‐cost crystallographic calculations. The experimental results were corroborated by DFT calculations, which revealed the electronic band structure. Formation energy calculations allowed conclusions to be drawn about the stability in comparison to the initial ternary nitridophosphates. The synthesis of CaLi2PN3 exemplifies the enormous potential of medium‐pressure syntheses in the field of nitridophosphate research. Furthermore, the presented new synthesis route allows a certain degree of structural control, which is a promising addition to previous synthesis strategies in nitridophosphate chemistry.
- Open Access
- 3 September 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (40)
Synthesis and Comprehensive Studies of Be‐IV‐N2 (IV=Si, Ge): Solving the Mystery of Wurtzite‐Type Pmc21 Structures
The research for wurtzite‐type ternary nitride semiconductors containing earth abundant elements with a stoichiometry of 1 : 1 : 2 was focused on metals like Mg or Zn, so far. The vast majority of these Grimm–Sommerfeld analogue compounds crystallize in the β‐NaFeO2 structure, although a second arrangement in space group Pmc21 is predicted to be a viable alternative. Despite extensive theoretical and experimental studies, this structure has so far remained undiscovered. Herein, we report on BeGeN2 in a Pmc21 structure, synthesized from Be3N2 and Ge3N4 using a high‐pressure high‐temperature approach at 6 GPa and 800 °C. The compound was characterized by powder X‐ray diffraction (PXRD), solid state nuclear magnetic resonance (NMR), Raman and energy dispersive X‐ray (EDX) spectroscopy, temperature‐dependent PXRD, second harmonic generation (SHG) and UV/Vis measurements and in addition also compared to its lighter homologue BeSiN2 in all mentioned analytic techniques. The synthesis and investigation of both the first beryllium germanium nitride and the first ternary wurtzite‐type nitride crystallizing in space group Pmc21 open the door to a new field of research on wurtzite‐type related structures.
- 3 September 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (40)
Open AccessSynthesis and Comprehensive Studies of Be‐IV‐N2 (IV=Si, Ge): Solving the Mystery of Wurtzite‐Type Pmc21 Structures
The research for wurtzite‐type ternary nitride semiconductors containing earth abundant elements with a stoichiometry of 1 : 1 : 2 was focused on metals like Mg or Zn, so far. The vast majority of these Grimm–Sommerfeld analogue compounds crystallize in the β‐NaFeO2 structure, although a second arrangement in space group Pmc21 is predicted to be a viable alternative. Despite extensive theoretical and experimental studies, this structure has so far remained undiscovered. Herein, we report on BeGeN2 in a Pmc21 structure, synthesized from Be3N2 and Ge3N4 using a high‐pressure high‐temperature approach at 6 GPa and 800 °C. The compound was characterized by powder X‐ray diffraction (PXRD), solid state nuclear magnetic resonance (NMR), Raman and energy dispersive X‐ray (EDX) spectroscopy, temperature‐dependent PXRD, second harmonic generation (SHG) and UV/Vis measurements and in addition also compared to its lighter homologue BeSiN2 in all mentioned analytic techniques. The synthesis and investigation of both the first beryllium germanium nitride and the first ternary wurtzite‐type nitride crystallizing in space group Pmc21 open the door to a new field of research on wurtzite‐type related structures.
- Open Access
- 2 September 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 63 (40) , e202409593
Synthesis and Comprehensive Studies of Be‐IV‐N2 (IV=Si, Ge): Solving the Mystery of Wurtzite‐Type Pmc21 Structures
The research for wurtzite‐type ternary nitride semiconductors containing earth abundant elements with a stoichiometry of 1 : 1 : 2 was focused on metals like Mg or Zn, so far. The vast majority of these Grimm–Sommerfeld analogue compounds crystallize in the β‐NaFeO2 structure, although a second arrangement in space group Pmc21 is predicted to be a viable alternative. Despite extensive theoretical and experimental studies, this structure has so far remained undiscovered. Herein, we report on BeGeN2 in a Pmc21 structure, synthesized from Be3N2 and Ge3N4 using a high‐pressure high‐temperature approach at 6 GPa and 800 °C. The compound was characterized by powder X‐ray diffraction (PXRD), solid state nuclear magnetic resonance (NMR), Raman and energy dispersive X‐ray (EDX) spectroscopy, temperature‐dependent PXRD, second harmonic generation (SHG) and UV/Vis measurements and in addition also compared to its lighter homologue BeSiN2 in all mentioned analytic techniques. The synthesis and investigation of both the first beryllium germanium nitride and the first ternary wurtzite‐type nitride crystallizing in space group Pmc21 open the door to a new field of research on wurtzite‐type related structures.
- 2 September 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 63 (40) , e202409593
Open AccessSynthesis and Comprehensive Studies of Be‐IV‐N2 (IV=Si, Ge): Solving the Mystery of Wurtzite‐Type Pmc21 Structures
The research for wurtzite‐type ternary nitride semiconductors containing earth abundant elements with a stoichiometry of 1 : 1 : 2 was focused on metals like Mg or Zn, so far. The vast majority of these Grimm–Sommerfeld analogue compounds crystallize in the β‐NaFeO2 structure, although a second arrangement in space group Pmc21 is predicted to be a viable alternative. Despite extensive theoretical and experimental studies, this structure has so far remained undiscovered. Herein, we report on BeGeN2 in a Pmc21 structure, synthesized from Be3N2 and Ge3N4 using a high‐pressure high‐temperature approach at 6 GPa and 800 °C. The compound was characterized by powder X‐ray diffraction (PXRD), solid state nuclear magnetic resonance (NMR), Raman and energy dispersive X‐ray (EDX) spectroscopy, temperature‐dependent PXRD, second harmonic generation (SHG) and UV/Vis measurements and in addition also compared to its lighter homologue BeSiN2 in all mentioned analytic techniques. The synthesis and investigation of both the first beryllium germanium nitride and the first ternary wurtzite‐type nitride crystallizing in space group Pmc21 open the door to a new field of research on wurtzite‐type related structures.
- Open Access
- 4 July 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (32)
Trigonal Planar [PN3]4− Anion in the Nitridophosphate Oxide Ba3[PN3]O
Nitridophosphates, with their primary structural motif of isolated or condensed PN4 tetrahedra, meet many requirements for high performance materials. Their properties are associated with their structural diversity, which is mainly limited by this specific building block. Herein, we present the alkaline earth metal nitridophosphate oxide Ba3[PN3]O featuring a trigonal planar [PN3]4− anion. Ba3[PN3]O was obtained using a hot isostatic press by medium‐pressure high‐temperature synthesis (MP/HT) at 200 MPa and 880 °C. The crystal structure was solved and refined from single‐crystal X‐ray diffraction data in space group R c (no. 167) and confirmed by SEM‐EDX, magic angle spinning (MAS) NMR, vibrational spectroscopy (Raman, IR) and low‐cost crystallographic calculations (LCC). MP/HT synthesis reveals great potential by extending the structural chemistry of P to include trigonal planar [PN3]4− motifs.
- 4 July 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (32)
Open AccessTrigonal Planar [PN3]4− Anion in the Nitridophosphate Oxide Ba3[PN3]O
Nitridophosphates, with their primary structural motif of isolated or condensed PN4 tetrahedra, meet many requirements for high performance materials. Their properties are associated with their structural diversity, which is mainly limited by this specific building block. Herein, we present the alkaline earth metal nitridophosphate oxide Ba3[PN3]O featuring a trigonal planar [PN3]4− anion. Ba3[PN3]O was obtained using a hot isostatic press by medium‐pressure high‐temperature synthesis (MP/HT) at 200 MPa and 880 °C. The crystal structure was solved and refined from single‐crystal X‐ray diffraction data in space group R c (no. 167) and confirmed by SEM‐EDX, magic angle spinning (MAS) NMR, vibrational spectroscopy (Raman, IR) and low‐cost crystallographic calculations (LCC). MP/HT synthesis reveals great potential by extending the structural chemistry of P to include trigonal planar [PN3]4− motifs.