Ziqi Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ziqi Chen has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
Rui Li
8 shared publicationsYujun Liu
Dalian University of Technology
8 shared publicationsJi Wang
Dalian University of Technology
7 shared publications- Ji Wang
School of Naval Architecture and Ocean Engineering, Dalian University of Technology, Dalian 116024, China
4 shared publications - Rui Li
School of Naval Architecture and Ocean Engineering, Dalian University of Technology, Dalian 116024, China
3 shared publications - Yujun Liu
School of Naval Architecture and Ocean Engineering, Dalian University of Technology, Dalian 116024, China
2 shared publications
Latest Publications
- 1 January 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (1)
A novel texture design scheme and performance enhancement mechanism of journal bearing
To address the issues of high friction loss and insufficient load-carrying capacity in journal bearings, this study proposes a texture interval design method based on the oil film rupture point and maximum film pressure point, thus systematically investigating the effects of texture depth, axial length, circumferential quantity, and texture interval on bearing performance and the underlying mechanism. The results showed that the optimal bearing load-carrying capacity and minimum friction coefficient occurred within the 40%–80% pressure texture interval, rather than the traditional half-texture interval. Specifically, under low eccentricity conditions, texture depth optimization was prioritized, while high eccentricity necessitated the regulation of texture interval. An appropriate texture length further enhances bearing performance when combined with the pressure texture interval. Mechanistic analysis reveals that the texture depth ratio dominated the pressure distribution of the lubricant medium and boundary layer separation, whereas the number of textures influences bearing performance by inducing a secondary dynamic pressure effect. This study provides an engineering-oriented multi-parameter co-optimization strategy for the structural optimization of plain bearings.
- 1 January 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (1)
A novel texture design scheme and performance enhancement mechanism of journal bearing
To address the issues of high friction loss and insufficient load-carrying capacity in journal bearings, this study proposes a texture interval design method based on the oil film rupture point and maximum film pressure point, thus systematically investigating the effects of texture depth, axial length, circumferential quantity, and texture interval on bearing performance and the underlying mechanism. The results showed that the optimal bearing load-carrying capacity and minimum friction coefficient occurred within the 40%–80% pressure texture interval, rather than the traditional half-texture interval. Specifically, under low eccentricity conditions, texture depth optimization was prioritized, while high eccentricity necessitated the regulation of texture interval. An appropriate texture length further enhances bearing performance when combined with the pressure texture interval. Mechanistic analysis reveals that the texture depth ratio dominated the pressure distribution of the lubricant medium and boundary layer separation, whereas the number of textures influences bearing performance by inducing a secondary dynamic pressure effect. This study provides an engineering-oriented multi-parameter co-optimization strategy for the structural optimization of plain bearings.
- Open Access
- 1 October 2025
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3127 (1)
Study on the lubrication performance of journal bearings considering misalignment and cavitation effects
Journal misalignment and cavitation effects can significantly affect the dynamic performance of bearings. In this study, the Reynolds equation considering mass conservation is adopted to consider the cavitation effect, and the effects of different misalignment angles on the bearing lubrication performance are investigated, including BLC (bearing load-carrying capacity), MOP (maximum oil film pressure), FC (friction coefficients), SAA (stabilized attitude angle), SC (stiffness coefficient), DC (damping coefficient), and stability margin. The model’s precision is validated through a comparison between experimental findings and published studies. The results demonstrate that journal misalignment significantly increases the dynamic performance of the bearings and improves the stability. While cavitation effect reduces the BLC and adversely affects the stability. The obtained results are crucial for the optimal design of bearing structures and the enhancement of their stability.
- 1 October 2025
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3127 (1)
Open AccessStudy on the lubrication performance of journal bearings considering misalignment and cavitation effects
Journal misalignment and cavitation effects can significantly affect the dynamic performance of bearings. In this study, the Reynolds equation considering mass conservation is adopted to consider the cavitation effect, and the effects of different misalignment angles on the bearing lubrication performance are investigated, including BLC (bearing load-carrying capacity), MOP (maximum oil film pressure), FC (friction coefficients), SAA (stabilized attitude angle), SC (stiffness coefficient), DC (damping coefficient), and stability margin. The model’s precision is validated through a comparison between experimental findings and published studies. The results demonstrate that journal misalignment significantly increases the dynamic performance of the bearings and improves the stability. While cavitation effect reduces the BLC and adversely affects the stability. The obtained results are crucial for the optimal design of bearing structures and the enhancement of their stability.
- Open Access
- 1 October 2025
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3127 (1) , 012002
Study on static characteristics of diesel engine main bearing considering bidirectional misalignment effect
To study the uncertain lubrication property of diesel engine main bearings operating under offset load conditions, a lubrication model considering the bidirectional misalignment effect is established, and the influence of the BMA (bidirectional misalignment angle) on the static lubrication property of the diesel engine main bearings under various rotational speeds and loading conditions is thoroughly investigated. The results show that the static characteristics of the bearings may deteriorate with the decrease of rotational speed and the increase of load. The misalignment angle (MA) exerts a substantial influence on both the lubricant film thickness and pressure profile, resulting in elevated maximum oil pressure (MOP) while concurrently reducing both the attitude angle and minimum film thickness (MOT). Moreover, the effect of BMA on the static performance of the bearing is considerably more substantial than that of unidirectional misalignment. The findings are crucial for guiding the optimal design of diesel engine main bearing structures and improving the safety and stability of operation.
- 1 October 2025
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3127 (1) , 012002
Open AccessStudy on static characteristics of diesel engine main bearing considering bidirectional misalignment effect
To study the uncertain lubrication property of diesel engine main bearings operating under offset load conditions, a lubrication model considering the bidirectional misalignment effect is established, and the influence of the BMA (bidirectional misalignment angle) on the static lubrication property of the diesel engine main bearings under various rotational speeds and loading conditions is thoroughly investigated. The results show that the static characteristics of the bearings may deteriorate with the decrease of rotational speed and the increase of load. The misalignment angle (MA) exerts a substantial influence on both the lubricant film thickness and pressure profile, resulting in elevated maximum oil pressure (MOP) while concurrently reducing both the attitude angle and minimum film thickness (MOT). Moreover, the effect of BMA on the static performance of the bearing is considerably more substantial than that of unidirectional misalignment. The findings are crucial for guiding the optimal design of diesel engine main bearing structures and improving the safety and stability of operation.
- 15 May 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 240 (2) , 183-202
Numerical study on the static and dynamic performance of worn water-lubricated journal bearings considering cavitation
The inevitable wear of water-lubricated bearings (WLBs) during operation affects their lubrication properties. The existing studies mainly focus on the tribological performance and wear rate of WLBs, while little has been reported on the static and dynamic properties of bearings subjected to wear, especially regarding stability assessment. The novelty of this study is to integrate the wear morphology with the mass-conservation cavitation algorithm to reveal the influence of different wear morphologies on the static and dynamic properties and stability of WLBs, and to quantify the influence of the cavitation effect on the prediction of lubrication performance. Therefore, this study proposes an elastohydrodynamic lubrication (EHL) model for WLBs, considering cavitation effects and bush wear. The equations are discretized using the control volume method (CVM) and solved using the Fischer-Burmeister-Newton-Schur (FBNS) method. The model's accuracy is verified by comparing the experimental data with the published literature. On this basis, the effects of cavitation, wear offset angle, and wear depth on the static and dynamic properties of WLBs are investigated. The results show that the cavitation effect can improve the load-carrying performance of WLBs, reduce the frictional coefficient, and increase the stiffness and damping coefficient. The bush wear may have a detrimental impact on WLBs. When the wear depth is particularly substantial, it can lead to significant inaccuracies in the Reynolds boundary conditions. Furthermore, a negative wear offset angle enhances the hydrodynamic effects and decreases the fractional coefficient, resulting in a more pronounced impact on the stiffness and damping in the vertical direction. Conversely, the positive wear offset angle has the opposite effect. This research offers a practical approach for predicting the static and dynamic performance of worn WLBs and valuable ideas for enhancing the system's stability and design.
- 15 May 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 240 (2) , 183-202
Numerical study on the static and dynamic performance of worn water-lubricated journal bearings considering cavitation
The inevitable wear of water-lubricated bearings (WLBs) during operation affects their lubrication properties. The existing studies mainly focus on the tribological performance and wear rate of WLBs, while little has been reported on the static and dynamic properties of bearings subjected to wear, especially regarding stability assessment. The novelty of this study is to integrate the wear morphology with the mass-conservation cavitation algorithm to reveal the influence of different wear morphologies on the static and dynamic properties and stability of WLBs, and to quantify the influence of the cavitation effect on the prediction of lubrication performance. Therefore, this study proposes an elastohydrodynamic lubrication (EHL) model for WLBs, considering cavitation effects and bush wear. The equations are discretized using the control volume method (CVM) and solved using the Fischer-Burmeister-Newton-Schur (FBNS) method. The model's accuracy is verified by comparing the experimental data with the published literature. On this basis, the effects of cavitation, wear offset angle, and wear depth on the static and dynamic properties of WLBs are investigated. The results show that the cavitation effect can improve the load-carrying performance of WLBs, reduce the frictional coefficient, and increase the stiffness and damping coefficient. The bush wear may have a detrimental impact on WLBs. When the wear depth is particularly substantial, it can lead to significant inaccuracies in the Reynolds boundary conditions. Furthermore, a negative wear offset angle enhances the hydrodynamic effects and decreases the fractional coefficient, resulting in a more pronounced impact on the stiffness and damping in the vertical direction. Conversely, the positive wear offset angle has the opposite effect. This research offers a practical approach for predicting the static and dynamic performance of worn WLBs and valuable ideas for enhancing the system's stability and design.
- 11 April 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 239 (14) , 5395-5416
Research on the transient tribo-dynamic performance of water-lubricated bearing rotor system considering different design parameters
The leading cause of the rotor’s unstable vibration is the significant nonlinear hydrodynamic impact of the water-lubricated bearing (WLB). To investigate the correlation between design variables and the transient tribo-dynamic characteristics of a water-lubricated bearing rotor system (WLBRS), in this study, multi-scale multiphysics modelling and analysis of coupled interfacial lubrication, asperity contact and elastic deformation are carried out to develop a transient mixed elastohydrodynamic lubrication (MEHL) model for WLBRS. A comparison of experimental and numerical data from published literature verifies the validity of the model. On this basis, an investigation is conducted on the impact of design factors, such as length-to-diameter ratio, clearance ratio, bearing bush elastic modulus, surface roughness, and unbalanced eccentricity, on several aspects of the WLBRS. These aspects include the rotor orbit, minimum water film thickness, frictional coefficient, contact force, hydrodynamic force, and transient dynamic response. The results indicate that there are effective methods for suppressing rotor vibration, improving load capacity, and enhancing the operational stability of WLB. This study provides valuable recommendations for the optimum design and vibration control of WLB.
- 11 April 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 239 (14) , 5395-5416
Research on the transient tribo-dynamic performance of water-lubricated bearing rotor system considering different design parameters
The leading cause of the rotor’s unstable vibration is the significant nonlinear hydrodynamic impact of the water-lubricated bearing (WLB). To investigate the correlation between design variables and the transient tribo-dynamic characteristics of a water-lubricated bearing rotor system (WLBRS), in this study, multi-scale multiphysics modelling and analysis of coupled interfacial lubrication, asperity contact and elastic deformation are carried out to develop a transient mixed elastohydrodynamic lubrication (MEHL) model for WLBRS. A comparison of experimental and numerical data from published literature verifies the validity of the model. On this basis, an investigation is conducted on the impact of design factors, such as length-to-diameter ratio, clearance ratio, bearing bush elastic modulus, surface roughness, and unbalanced eccentricity, on several aspects of the WLBRS. These aspects include the rotor orbit, minimum water film thickness, frictional coefficient, contact force, hydrodynamic force, and transient dynamic response. The results indicate that there are effective methods for suppressing rotor vibration, improving load capacity, and enhancing the operational stability of WLB. This study provides valuable recommendations for the optimum design and vibration control of WLB.
- 1 March 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (3)
Transient tribo-dynamic behavior of bi-directional misaligned water-lubricated bearings coupled with journal axial motion
The novelty of this study is that the mechanism of the impact of axial motion on the nonlinear tribo-dynamic behavior of bi-directional misaligned water-lubricated bearings (WLBs) is systematically discussed. A novel model that incorporates journal axial motion and bi-directional misalignment is introduced to evaluate the complex transient performance of WLBs under dynamic loads. Based on the mass conservation cavitation algorithm, the average Reynolds equation is modified to account for the impact of axial motion on Couette and unsteady flow, and the time-varying water film thickness equation is modified to achieve the complicated coupling effect of multi-factorial and multi-physical fields. The accuracy of the model and methodology proposed in this study is evaluated by existing experimental and numerical data. The impact of axial motion, misalignment type, misalignment angle, axial velocity, rotational speed, load, and radius clearance on the transient tribo-dynamic behaviors is systematically investigated. The results show that an appropriate misalignment angle positively affects the enhancement of hydrodynamic performance and diminishes rotor vibration response. Nonetheless, the impact of axial motion varies significantly across different misalignment types. The impact of axial motion becomes more significant with increasing load, decreasing rotational speed, or decreasing radius clearance. The results of this study present a helpful reference for misaligned WLB theoretical analysis and optimal design.
- 1 March 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (3)
Transient tribo-dynamic behavior of bi-directional misaligned water-lubricated bearings coupled with journal axial motion
The novelty of this study is that the mechanism of the impact of axial motion on the nonlinear tribo-dynamic behavior of bi-directional misaligned water-lubricated bearings (WLBs) is systematically discussed. A novel model that incorporates journal axial motion and bi-directional misalignment is introduced to evaluate the complex transient performance of WLBs under dynamic loads. Based on the mass conservation cavitation algorithm, the average Reynolds equation is modified to account for the impact of axial motion on Couette and unsteady flow, and the time-varying water film thickness equation is modified to achieve the complicated coupling effect of multi-factorial and multi-physical fields. The accuracy of the model and methodology proposed in this study is evaluated by existing experimental and numerical data. The impact of axial motion, misalignment type, misalignment angle, axial velocity, rotational speed, load, and radius clearance on the transient tribo-dynamic behaviors is systematically investigated. The results show that an appropriate misalignment angle positively affects the enhancement of hydrodynamic performance and diminishes rotor vibration response. Nonetheless, the impact of axial motion varies significantly across different misalignment types. The impact of axial motion becomes more significant with increasing load, decreasing rotational speed, or decreasing radius clearance. The results of this study present a helpful reference for misaligned WLB theoretical analysis and optimal design.
- Open Access
- 31 January 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (2) , 270
Dynamic Characteristics of Bidirectional Misaligned Marine Water-Lubricated Bearings Considering Turbulence, Surface Roughness and Bush Deformation
The marine water-lubricated bearing’s (WLBs) dynamic properties are essential for ensuring the shaft system’s operational dependability. The coupled model of mixed lubrication and turbulence under the impact of bidirectional misalignment is proposed in this research, and the perturbation equations of marine WLBs with 32 coefficients are derived. The finite difference method (FDM) is used to solve the steady-state and perturbation equations, and the impacts of turbulence, bearing bush deformation, surface roughness, and bidirectional shaft misalignment on the dynamic characteristics of the WLBs are systematically investigated. The results reveal that under mixed lubrication, surface roughness and the turbulence effect can both greatly improve the stiffness and damping of the bearings, but that there is a threshold phenomenon for the turbulence effect’s influence on these properties. Neglecting the elastic deformation of the bush may lead to an overestimation of the bearings’ stiffness and damping, causing substantial inaccuracies in conditions of heavy load or declined Young’s modulus. The 32 coefficients of the WLB exhibit considerable variation with the misalignment angle; hence, a more comprehensive dynamic model should be developed for misaligned marine WLBs. The study’s findings provide valuable insights for rotor dynamics research and optimal design of lubrication performance in marine WLBs.
- 31 January 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (2) , 270
Open AccessDynamic Characteristics of Bidirectional Misaligned Marine Water-Lubricated Bearings Considering Turbulence, Surface Roughness and Bush Deformation
The marine water-lubricated bearing’s (WLBs) dynamic properties are essential for ensuring the shaft system’s operational dependability. The coupled model of mixed lubrication and turbulence under the impact of bidirectional misalignment is proposed in this research, and the perturbation equations of marine WLBs with 32 coefficients are derived. The finite difference method (FDM) is used to solve the steady-state and perturbation equations, and the impacts of turbulence, bearing bush deformation, surface roughness, and bidirectional shaft misalignment on the dynamic characteristics of the WLBs are systematically investigated. The results reveal that under mixed lubrication, surface roughness and the turbulence effect can both greatly improve the stiffness and damping of the bearings, but that there is a threshold phenomenon for the turbulence effect’s influence on these properties. Neglecting the elastic deformation of the bush may lead to an overestimation of the bearings’ stiffness and damping, causing substantial inaccuracies in conditions of heavy load or declined Young’s modulus. The 32 coefficients of the WLB exhibit considerable variation with the misalignment angle; hence, a more comprehensive dynamic model should be developed for misaligned marine WLBs. The study’s findings provide valuable insights for rotor dynamics research and optimal design of lubrication performance in marine WLBs.
- 1 October 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (10)
Study on the transient performance of textured water-lubricated bearings considering different acceleration conditions
This study analyses the transient friction dynamics behavior of water-lubricated bearings (WLBs) with a textured structure, which explains the mechanism of texture structure influencing the hydrodynamic effect of WLB in the physical aspect. A comparison of experimental and numerical data is carried out to validate the proposed mixed lubrication model with a textured structure for WLBs. The effects of texture type, texture angle, acceleration mode, and acceleration time on the nonlinear friction dynamics properties of WLBs are investigated. The result shows that various texture structures exhibit distinct pumping effects and that the optimal friction dynamics performance of WLBs can be achieved by adopting the right herringbone texture and an acceptable texture angle. It is advisable to utilize the reverse S-shaped acceleration mode, as it may efficiently mitigate hydrodynamic shock, minimize frictional contact at the initial startup stage, and control the rotor's vibration in later stages. The brief acceleration time may result in a transient shock that hampers proper lubrication, consequently affecting the stable operation of WLBs. The study's findings offer helpful suggestions for the enhanced design of WLB structures and the mitigation of wear and vibration.
- 1 October 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (10)
Study on the transient performance of textured water-lubricated bearings considering different acceleration conditions
This study analyses the transient friction dynamics behavior of water-lubricated bearings (WLBs) with a textured structure, which explains the mechanism of texture structure influencing the hydrodynamic effect of WLB in the physical aspect. A comparison of experimental and numerical data is carried out to validate the proposed mixed lubrication model with a textured structure for WLBs. The effects of texture type, texture angle, acceleration mode, and acceleration time on the nonlinear friction dynamics properties of WLBs are investigated. The result shows that various texture structures exhibit distinct pumping effects and that the optimal friction dynamics performance of WLBs can be achieved by adopting the right herringbone texture and an acceptable texture angle. It is advisable to utilize the reverse S-shaped acceleration mode, as it may efficiently mitigate hydrodynamic shock, minimize frictional contact at the initial startup stage, and control the rotor's vibration in later stages. The brief acceleration time may result in a transient shock that hampers proper lubrication, consequently affecting the stable operation of WLBs. The study's findings offer helpful suggestions for the enhanced design of WLB structures and the mitigation of wear and vibration.
- 9 September 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (10) , 105241
Nonlinear friction dynamics of water-lubricated bearings under transient shocks considering cavitation and turbulence effects
This study proposes a transient elastohydrodynamic mixed lubrication (EHML) model for water-lubricated bearings (WLBs) that incorporates cavitation and turbulence effects to evaluate the nonlinear friction dynamic performance under transient shock loads. The generalized average Reynolds equation is discretized using the control volume technique (CVM), and the constrained system is solved using the Fischer-Burmeister-Newton-Schur (FBNS) method. The validity of the model is verified by a comparison of experimental data from published literature. On this basis, the effects of cavitation, turbulence, shock load amplitude, direction, time, and rotational speed on WLB nonlinear friction dynamics characteristics are investigated. The results show that cavitation induces hydrodynamic loss under transient shock conditions, significantly increases contact time and load, and exacerbates the hydrodynamic instability phenomenon. In contrast, the turbulence effect effectively reduces frictional contact. The stability of WLBs under transient shock conditions is closely related to the load offset angle. Reducing the load offset angle improves the anti-shock stability of the bearings. Nevertheless, an increase in the amplitude and duration of the shock load may result in a deterioration of the frictional contact behavior. Increasing the rotational speed appropriately favors accelerating the lubrication regime transition and improving WLB’s anti-shock stability. This study provides a reference for enhancing WLB anti-shock performance and optimizing structural design.
- 9 September 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (10) , 105241
Nonlinear friction dynamics of water-lubricated bearings under transient shocks considering cavitation and turbulence effects
This study proposes a transient elastohydrodynamic mixed lubrication (EHML) model for water-lubricated bearings (WLBs) that incorporates cavitation and turbulence effects to evaluate the nonlinear friction dynamic performance under transient shock loads. The generalized average Reynolds equation is discretized using the control volume technique (CVM), and the constrained system is solved using the Fischer-Burmeister-Newton-Schur (FBNS) method. The validity of the model is verified by a comparison of experimental data from published literature. On this basis, the effects of cavitation, turbulence, shock load amplitude, direction, time, and rotational speed on WLB nonlinear friction dynamics characteristics are investigated. The results show that cavitation induces hydrodynamic loss under transient shock conditions, significantly increases contact time and load, and exacerbates the hydrodynamic instability phenomenon. In contrast, the turbulence effect effectively reduces frictional contact. The stability of WLBs under transient shock conditions is closely related to the load offset angle. Reducing the load offset angle improves the anti-shock stability of the bearings. Nevertheless, an increase in the amplitude and duration of the shock load may result in a deterioration of the frictional contact behavior. Increasing the rotational speed appropriately favors accelerating the lubrication regime transition and improving WLB’s anti-shock stability. This study provides a reference for enhancing WLB anti-shock performance and optimizing structural design.
- 27 August 2024
- Published by Elsevier in Ocean Engineering
- Vol. 312
A novel 4-DOF marine stern bearing support model considering discrete distribution effects
- 27 August 2024
- Published by Elsevier in Ocean Engineering
- Vol. 312
A novel 4-DOF marine stern bearing support model considering discrete distribution effects