AKAshish Kumar

Ashish Kumar

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ashish Kumar has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Dielectric waveguide interconnects for hybrid mm-Waves and terahertz system integration

    by Ashish Kumar, Muhsin Ali, Daniel Cabo Gallego, Alejandro Lavado Rivera, Guillermo Carpintero

    In this work, we propose interconnection structures for substrateless all-silicon dielectric waveguides, a platform for terahertz (THz) hybrid integration that currently relies on traditional tapered interfaces. We demonstrate two dielectric waveguide-to-waveguide interconnect approaches: a truncated termination and a quarter-wave-matched (QWM) slot termination. Both designs maintain a confined coupling point, enabling consistent coupling. Experimental results show maximum interconnection coupling losses of 5 dB $5\,\mathrm{dB}$ 5 d B and 2.5 dB $2.5\,\mathrm{dB}$ 2.5 d B for the truncated and QWM-slot terminations, respectively, across the 220–330 GHz band. The QWM-slot transmission coefficient remains above minus 3 dB $-3\,\mathrm{dB}$ − 3 d B with a misalignment tolerance up to 100 mu m $100\,\mu\mathrm{m}$ 100 μ m , representing a 2.5 times $2.5\times$ 2.5 × improvement over the truncated design. Offset characterization along three axes reveals smooth decoupling behavior over a 1 mm range, validating the potential for broadband, contactless interconnects between dielectric waveguide interfaces. These results establish a compact THz interconnect concept with substantially relaxed translational alignment tolerances, making it well-suited for deployment in scalable 6G multi-chip arrays and THz sensing modules.

  • Open Access

    Low-index and thin-film material characterization in the terahertz range via dielectric waveguide evanescent-field interaction

    by Ashish Kumar, Hossein Rasekhmanesh, Asrin Piroutiniya, Daniel C. Gallego, Daniel Headland, Muhsin Ali, Guillermo Carpintero

    Terahertz (THz) and millimeter-wave (mmW) spectroscopy provide non-ionizing, label-free access to the electromagnetic response of a wide range of materials, enabling applications in quality control, biomedical diagnostics, and non-destructive evaluation. Conventional free-space THz spectroscopy, however, often suffers from limited interaction length and reduced sensitivity when the sample is thin, spatially localized, available only in small volume, or incompatible with beam-based fixtures. In this work, we present an integrated, non-contact approach for broadband material-property extraction based on the evanescent field of a low-loss high-resistivity silicon dielectric waveguide. The material under test (MUT) is placed in the cladding region, where it perturbs the guided-mode propagation constant and attenuation. By measuring the complex transmission through a reference waveguide and a waveguide loaded with the MUT and by combining these data with mode simulations and a perturbation-based inversion, we extract the complex permittivity over a continuous frequency band. The approach leverages an evanescent-field-based non-destructive method, a compact measurement setup, and feasibility to rescale toward higher frequencies for broadband material screening in the mmW to THz range.

  • Open Access

    3D-Printed Multimode-Interference-Based Bessel Beamformer for Terahertz Dielectric Waveguides

    by Ashish Kumar, Surya Revanth Ayyagari, Muhsin Ali, Irmantas Kašalynas, Daniel Headland, Guillermo Carpintero

    We demonstrate a Bessel beamformer based on multimode interference (MMI) for the terahertz (THz) wave range. Unlike traditional Bessel beam generation methods, which often rely on bulky free-space optical setups, our approach leverages a 3D-printed cyclic-olefin-copolymer (COC) MMI structure fed from a dielectric waveguide (DW) with a $\lambda /4$ slot-waveguide termination (SWT) that provides an index-matched interface for low reflection. Based on this interface and the low losses of the constituent materials, the beamformer achieves a measured transmission efficiency of 93.9% at 275 GHz, with a propagating distance of 20 mm ( $\sim$ 20 $\lambda$ ). Even at an extended distance of 35mm ( $\sim$ 35 $\lambda$ ), the beam maintains a 50% efficiency. This approach addresses key limitations of existing free-space methods, offering a workable guided-wave approach to launch a THz Bessel beam.

  • Open Access

    3D-Printed Multimode-Interference-Based Bessel Beamformer for Terahertz Dielectric Waveguides

    by Ashish Kumar, Surya Revanth Ayyagari, Muhsin Ali, Irmantas Kašalynas, Daniel Headland, Guillermo Carpintero

    We demonstrate a Bessel beamformer based on multimode-interference (MMI) for the terahertz (THz) wave range. Unlike traditional Bessel beam generation methods, which often rely on bulky free-space optical setups, our approach leverages a 3D-printed Cyclic-Olefin-Copolymer (COC) MMI structure that is contact-coupled to a dielectric waveguide (DW). The DW is interfaced with the MMI by employing a λ/4 slot-waveguide termination (SWT). Aided by the low reflection of this interface and the low loss of the constituent materials, the beamformer generates a Bessel beam with a measured transmission efficiency of 93.8% at 275 GHz at a propagating distance of 20 mm (∼20λ). Even at an extended distance of 35 mm (∼35λ), the beam maintains a notable 50% efficiency. The opposing end of the DW is likewise terminated with an SWT, optimized to couple to hollow metallic waveguides. This approach addresses key limitations of existing free-space methods, offering a workable guided-wave approach to launch a THz Bessel beam.

  • Matched dielectric slot waveguide as an all-dielectric terahertz magnetic dipole

    by Daniel Headland, Ashish Kumar, Harrison Lees, Withawat Withayachumnankul, Guillermo Carpintero

    We observe that the modal field distribution of a dielectric slot waveguide closely resembles a magnetic dipole antenna. Such an aperture distribution traditionally demands metals, making it ill-suited to high frequencies due to excessive ohmic loss. By terminating a dielectric slot waveguide with a matched free-space interface, a compact all-dielectric radiating magnetic dipole is realized. In this way, we introduce general-purpose dipole antennas, which have long been a mainstay of RF and microwave ranges, into the realm of light wave photonic integrated circuits. The existence of the desired magnetic dipole aperture distribution is experimentally confirmed in the terahertz range, at ∼275 GHz, and good matching is evident in the ∼−25 dB reflection level. This is the electrically smallest radiator to ever be incorporated into an all-dielectric waveguiding platform.